Login Studio 3.0?

Hello,
I have installed OEID 3.0 on Linux 64 bit but I cannot login in Studio.
I have tried [email protected] with password Welcome123 and all kinds of combinations but nothing works.
Does anybody here know what the problem is?
Marco

Is this a brand new 3.0 installation or an upgrade from a previous version?
If an upgrade, then there is an extra step because of the change in the password encryption. See this topic in the Studio Migration Guide:
http://docs.oracle.com/cd/E39271_01/studio.300/studio_migration/toc.htm#User%20password%20encryption%20algorithm%20changed
There is also another recent similar thread that might be useful to you - 3.0 - Unable to login using [email protected] / Welcome123
Janice
Edited by: JaniceM on Mar 28, 2013 10:06 AM

Similar Messages

Unable to Login SQL server management studio:sql server 2005

Hello All,
I am unbale to login SQL server management studio with below scanario:
Server Type:Database Engine
Server Name:XXX
Authntication:Windows Auth
After enter "Connect : button below eeror is displaying
Error:"Canot connetc to XXX server
Additional information:
Attempted to read or write protected memory .This is an often an indication that the other memory is corrupt(System.Data)
Note:Database is connecting R3trans return code 0000
SAP is working fine
Please provide suggestion and inpuits its very urgent
Thanks
Nekkalapu

HI All,
Issue resolved after rebooting the server.
Thanks
Nekkalapu

Login issue in studio

I'm unable to log into studio with '[email protected]' Emaill address and I tried to login by creating a new userid but in that login inside control panel its just showing 'MyAccount' and its not showing other options.
How can I login with the admin user or else if I login with other user how to see other options in controlpanel.
Please solve my issue
Thanks,
Lakshman
Edited by: 953060 on Nov 23, 2012 2:49 AM

I suspect that something did change since you're no longer able to login as [email protected]/admin, but I digress.
DISCLAIMER: Changing the lportal.script database file is not recommended and is very risky. I am not recommending it per se. If you do attempt these steps, please back it up. Additionally, I have not tried these steps myself so I can't say with 100% certainty it will work. You should consider reinstalling OEID and importing a previously captured .lar file, if you have one.
Looking at the lportal.script file, I see this line which describes the schema of the USER_ table:
CREATE MEMORY TABLE USER_(UUID_ VARCHAR(75),USERID BIGINT NOT NULL PRIMARY KEY,COMPANYID BIGINT,CREATEDATE TIMESTAMP,MODIFIEDDATE TIMESTAMP,DEFAULTUSER BOOLEAN,CONTACTID BIGINT,PASSWORD_ VARCHAR(75),PASSWORDENCRYPTED BOOLEAN,PASSWORDRESET BOOLEAN,PASSWORDMODIFIEDDATE TIMESTAMP,REMINDERQUERYQUESTION VARCHAR(75),REMINDERQUERYANSWER VARCHAR(75),GRACELOGINCOUNT INTEGER,SCREENNAME VARCHAR(75),EMAILADDRESS VARCHAR(75),OPENID VARCHAR(1024),PORTRAITID BIGINT,LANGUAGEID VARCHAR(75),TIMEZONEID VARCHAR(75),GREETING VARCHAR(255),COMMENTS LONGVARCHAR,FIRSTNAME VARCHAR(75),MIDDLENAME VARCHAR(75),LASTNAME VARCHAR(75),JOBTITLE VARCHAR(100),LOGINDATE TIMESTAMP,LOGINIP VARCHAR(75),LASTLOGINDATE TIMESTAMP,LASTLOGINIP VARCHAR(75),LASTFAILEDLOGINDATE TIMESTAMP,FAILEDLOGINATTEMPTS INTEGER,LOCKOUT BOOLEAN,LOCKOUTDATE TIMESTAMP,AGREEDTOTERMSOFUSE BOOLEAN,ACTIVE_ BOOLEAN)
This shows me that in fields 8 and 9, I can store the password and specify if I am encrypting its storage or not. Towards the end of the file, I see this line for my [email protected] entry:
INSERT INTO USER_ VALUES('b9be140d-bac4-4e88-ac88-4ce6af2678fe',10151,10119,'2012-10-04 14:17:31.325000000','2012-10-04 14:17:31.325000000',FALSE,10152,'0DPiKuNIrrVmD8IUCuw1hQxNqZc=',TRUE,FALSE,NULL,'','',0,'admin','[email protected]','',0,'en_US','UTC','Welcome Admin Admin!','','Admin','','Admin','','2012-11-15 02:40:06.223000000','127.0.0.1','2012-11-13 15:24:45.263000000','127.0.0.1',NULL,0,FALSE,NULL,FALSE,TRUE)
My assumption is you could stop Studio. Change fields 8 and 9 in this line (after backing up the .script file) and restart Studio and log back in. My assumption is that you could change this line to something like:
INSERT INTO USER_ VALUES('b9be140d-bac4-4e88-ac88-4ce6af2678fe',10151,10119,'2012-10-04 14:17:31.325000000','2012-10-04 14:17:31.325000000',FALSE,10152,'my_plaintext_password',FALSE,FALSE,NULL,'','',0,'admin','[email protected]','',0,'en_US','UTC','Welcome Admin Admin!','','Admin','','Admin','','2012-11-15 02:40:06.223000000','127.0.0.1','2012-11-13 15:24:45.263000000','127.0.0.1',NULL,0,FALSE,NULL,FALSE,TRUE)
HTH,
Dan
http://branchbird.com

Oracle 10 gr studio taking long time to open the home/login page

Hi,
Oracle 10g studio taking the long time to open the home/ login page; when clicked on the launch workspace option.
Thanks,
Brijesh Kumar Singh.

How much memory do you have in your machine?
Are you running VMWare? How much physical (not logical) memory do you have allocated.
What else do you have concurrently running on your machine?
Dan

Looping login screen in Crystal Reports for Visual Studio 2008

Hello,
I am using Visual Studio 2008 with the Crystal Reports Basic for Visual Studio 2008. Visual Studio and the Crystal Reports Basic Runtime for Visual Studio 2008 (x64) are installed on both the development and production boxes. I am using Crystal Reports via Visual Studio and do not have the full blown version of Crystal Reports installed on my machine.
We have used Visual Studio to create an aspx webpage and would like to use Crystal Reports to display a graph. The report displays fine in debug mode, but displays a looping login screen when moved into production on the web server. The web server is using Windows Server 2008 (x64) with IIS 7. We have tried passing the logon parameters to the crystal report during the page init event with the auto-bind feature enabled on the crystal report viewer. A MySQL database provides the data for the report. All ODBC data sources have been configured the same on both machines.
Any help would be greatly appreciated! Thanks!

Hello,
Use a tool called ProcessMonitor from Microsoft and watch what happens when you try to log on.
Also can you verify you created your DSN using the 64 bit ODBC Admin and that you are using a System DSN so IIS can find it.
And that the MySQL ODBC drive is also 64 bit?
If you can read ODBC trace logs you could enable it also and see what error you are getting.
Thank you
Don

Can't login SQL Server 2008 R2 Express management studio

Hi i recently installed SQL Server 2008 R2 management studio. When I try to login i select 'Database engine' as the server type, I'm not sure what server name I'm
supposed to be using but I tried .\SQLEXPRESS and authentication is 'SQL server Authentication'. But as for login and password I don't have one. During the installation I was not prompted to provide a login/password. As with the 2005 server installation I
could by selecting 'mixed'. So how do i login for the first time on SQL server 2008 if i dont know/have my login/password?

Hi,
Try below links :
http://blogs.msdn.com/b/sqlexpress/archive/2006/11/22/connecting-to-sql-express-user-instances-in-management-studio.aspx
http://stackoverflow.com/questions/360141/how-to-connect-to-local-instance-of-sql-server-2008-express
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/e880c3be-a874-4979-8874-7044c087318d/sql-server-express-default-username-and-password
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

Can't Login from Essbase Studio

Hello Everyone,
I am new to Essbase. I have successfully installed Essbase in Unix server. But when i tried to login from essbase studio which I have installed in windows. I got the following error from log files in the server.
[ESSBASE0] [ERROR:32] [TCP-17] [] [ecid: 1361889277748,0] [tid: 1098848576] Network error: Timed out before receiving all data
and I got following error in the client side
Error Connecting to Essbase Studio Server
Reason :
Network Error
ps: I can ping to the server and also login to Essbase Administration Services

Hello John,
I can also connect ./start_BPMS_bpms1_CommandLineClient.sh from command line in Unix server. But i couldn't connect from my studio console install in windows.
I am getting the following error.
Network communication with the server failed. Check your network connection and try again.
Connection timed out: connect
Help!!!
Edited by: Khadka on Feb 28, 2013 9:34 PM

Specifying login configuration in Sun Java Studio

I'm trying to specify the location of the login configuration file in JSE8. In the Arguments field under the project's properties I have:
-D java.security.auth.login.config==c:/test_jaas.config
c:/test_jaas.config does exist, and contains
Sample {
com.sun.security.auth.module.Krb5LoginModule required useTicketCache="true";
Trying to instantiate a new LoginContext always throws a login exception with the message: "Unable to locate a login configuration".

Sorry, I don't know the answer:-(
You might have better luck in the Java Studio Enterprise forum.
Thanks,
-- Marco

How to Login to Web Dynpro developer studio in real time scenario.

Hi,
1. How to Login to Web Dynpro developer studio in real time scenario.
Do we have login pad and User id to enter developer studio.
Is the user id for login maintained in UME of J2EE engine.
2. How to stop and start j2ee engine in real time. Is it same SAP Management console is used like in Demo version.
3. If I use central server, Do I have to install GUI like SAP R/3 GUI to Develop, test and deploy my application.
Cheers,
Sam

Hi,
What do you mean with real time scenario? Do you talk about runtime?
NetWeaver Developer Studio (NWDS) is only for design time and you install it on the local PC/laptop of the developer. The 'connection' between NWDS and engine is specified in the preferences (Window->Preferences->SAP J2EE engine) of NWDS. The development track is in 'real life' (e.g. if the engine is a remote one) connected with support from SLD (System Landscape Directory) which is a tool for managing the NWDI (NetWeaver Development Infrastructure). In normal case, there are so-called 'development configurations' that can be imported into NWDS (Window->Preferences->Java Development Infrastructure).
For starting and stopping the engine, there are several possibilities: SAP MMC, view in NWDS or console.
If you've a central server, you connect your NWDS to this central server and then you can deploy to this central server.
Regards,
Jan

How to make a simple login page using java creator studio and mysql

Hi,
I hav got java creator studio n my sql.Can u give me the code for login page authentication and navigation

This is a forum about Java language questions, not about how to use a developers tool. I would say to go to the site where you got java creator studio from, and look for a forum there.

FR Studio Login Issue

Hi,
I'm trying to login in to FR studio and facing a issue " *You are not authorized to use this functionality. Contact you Administrator*".
All services are running in backend(R&A). I am using 11.1.2.1 version.
Any suggestions to troubleshoot this issue...
Thanks..!!
Edited by: 805248 on May 19, 2013 1:51 PM

Hello,
Where are you trying to login from?
Are the financial reporting studio and the Financial Reporting server on seperate servers?
There are a lot of support documents on Oracle support. Try searching with the Keyword You are not authorized to use this functionality.
FR studio pops up the same message for all the scenarios i.e. if you are not authorized user or FR studio is not able to resolve the host name or if the ports are not open.
You can also try checking this link, see if it helps - Unable to connect to FR server using FR studio on client machines 11.1.2.2
Thanks,
hyperionEPM
Please mark answers as helpful or correct for others to find them easliy.

Management Studio Login not possible

Hello,
I use BB 10.2.1 and after the latest Update the Management Studio is not accessable. I cannot give in Login Name and Password because thies fields are missing. I only the the drop down menu "Log in using" an this is empty.
Do you have any ideas?
Thanks and regards.
Doreen

are we talking about BES server?
how are you accessing BMS and what browser version?
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Sql management studio login error

***When i tried to login to the MS SQL management studio with <sid>adm user am geeting the error
The error text as below.
TITLE: Microsoft SQL Server Management Studio
Value cannot be null.
Parameter name: viewInfo (Microsoft.SqlServer.Management.SqlStudio.Explorer)
BUTTONS:
OK
Thanks

Hi,
Could you please check if there any directory named like 1,2,3 etc in
C:\Users\<username>\AppData\Local\Temp\
This error sometime occurs due to missing temporary file which is created every time at startup of ssms.exe file.
If you can find any log file which says missing file name then you just create the missing directory in given location. The file will be created automatically next time.
Thanks.

FR Studio login issues

I just installed FR Studio 11.1.2.1. I'm trying to connect to FR server 11.1.1.3. It throwed an error message saying "You're not authorized to use this functionality. Contact your administrator". Does this mean I can't connect to 11.1.1.3 using FR Studio 11.1.2.1?
Thanks.

Vivek is right. First I thought it was a security issue, but I got the same error message when I tried to login to FR Server 11.1.1.3 from FR Studio 11.1.2.1 and I have admin rights in both servers.
Here is the supported platform matrices for future reference: http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
Cheers,
Mehmet

FR Studio login error

When I try to log into Hyperion Financial Reporting Studio 11.1.2, I get the following message "You are not authorized to use this functionality".
I even tried logging in as "Admin" and it gives me the same message.
There is an error listed in the FRClientlogging.log:
[2011-02-10T10:26:43.618-05:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core.reporting.registry.FRSystem] [tid: main] [ecid: 0000IsGBbSdBT8OLuiP5iX1DL0En000000,0] [SRC_CLASS: com.hyperion.reporting.registry.FRSystem] [SRC_METHOD: getObjectFromURL] [[
java.lang.IllegalArgumentException: Invalid uri 'http(s)://<servername>:19000/hr/services/FRServiceReporting': incorrect scheme
at org.apache.commons.httpclient.HttpMethodBase.<init>(HttpMethodBase.java:222)
at org.apache.commons.httpclient.methods.ExpectContinueMethod.<init>(ExpectContinueMethod.java:93)
at org.apache.commons.httpclient.methods.EntityEnclosingMethod.<init>(EntityEnclosingMethod.java:119)
at org.apache.commons.httpclient.methods.PostMethod.<init>(PostMethod.java:106)
at com.hyperion.reporting.registry.FRSystem.getObjectFromURL(Unknown Source)
at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
at com.hyperion.reporting.javacom.HsServer.getServer(Unknown Source)
at com.hyperion.reporting.javacom.HsHelper.getServer(Unknown Source)
We are able to login to FR studio-development system just fine. This problem occurs in our new system.
We have already updated the Essbase server IP address in the client machine's hosts file.
Thanks,
Sujani

Hi Sujani,
Were you able to resolve this issue ?
I am having same issue & getting same errors in logs.
Thanks,
Santy

Login Studio 3.0?

Similar Messages

Maybe you are looking for