Logo & TOP_OF_PAGE in OO ALV

Hi everybody,
I have been struggling on putting Logo and write few things on TOP_OF_PAGE in ALV using OOPS.
I search through forum and found few materials, but still looking precise help. Any suggestions???
Regards,
Deva.

Deva,
This is what you will have to do.
Split the initial container into two. display the list in the bottom one.
Now in the top one create a object with reference to CL_DD_DOCUMENT. Use the method vertical_split of this class to split the top container again into two pieces. These split areas will refer to CL_DD_AREA.
Once that is done, use one of the areas to display your logo as shown below.
    call method document->vertical_split
                                  exporting split_area = document
                                            split_width = '70%'
                                  importing right_area = a_logo.
    call method a_logo->add_picture exporting picture_id = logo.
Regards,
Ravi
Note : Please reward the posts that help you.

Similar Messages

Display logo on screen in ALV Report.

Hello ,
I want to change the logo displayed in ALV report on screen.
I have imported logo from SE78 as BMP image.
The logo imported successfully.And it can be seen in SE78.
But when i replace the old logo name with new logo in function module
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = LIST_TOP
      I_LOGO                               = 'ENJOYSAP_LOGO'.
The logo is not getting displayed on screen.The dimensions and other parameters of old and new logo are same.
What needs to be done to resolve this problem?
Regards,
Deepak.

GOTO - OAOR (Business Document Navigator)
Give Class Name - PICTURES Class Type - OT..... then Execute
It will show you the list, then select ENJOYSAP_LOGO.
On that list, you will find one control with a "create" tab.
Click std. doc types.
Select SCREEN and double-click.
It will push FILE selection screen.
Select your company logo (.gif) and press OK.
It will ask for a description- for instance: "company logo".
It will let you know your doc has been stored successfully.
You can find your logo under ENJOYSAP_LOGO->Screen->company logo.
Use the TOP-OF-PAE event.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = gt_page
      i_logo             = 'ENJOYSAP_LOGO'.
ENDFORM.                    "top_of_page
Just run your ALV program, you should find your company logo in place of the EnjoySAP logo.
Cheers!

Calling logo in se38 using alv (reuse_alv_commentry_write)

hi
expets,
i want to display logo in se38 i am using fm REUSE_ALV_COMMENTARY_WRITE'
but when i execute the program logo is not display.
logo name = databas logo name.
thanks& regards
ajay.

Use FM - 'REUSE_ALV_COMMENTARY_WRITE'.
If you are using Function modules to display (You can also use Class), you will have to use GRID display for displaying the logo. Its not possible in List display.
Use the Function module REUSE_ALV_GRID_DISPLAY and pass the parameter "I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE' ".
This TOP_OF_PAGE is the subroutine (FORM - ENDFORM) in which the actual top of page code will be written (for showing the logo).
The picture must be uploaded into transaction OAOR with
classname 'PICTURES' AND
TYPE 'OT' to work with ALV GRID Functions.
FORM TOP_OF_PAGE.
DATA: WA_HEADER TYPE SLIS_LISTHEADER. REFRESH: GT_LIST_TOP_OF_PAGE.
H = HEADER LARGE FONT, S = STANDARD FONT, A = ITALICS
WA_HEADER-TYP = 'H'. WA_HEADER-INFO = 'TEST REPORT'. APPEND WA_HEADER TO GT_LIST_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE' EXPORTING I_LOGO = 'LOGO' IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM. " TOP_OF_PAGE

How to print the logo in top centre (alv report)

Hi friends,
     I need to print the company logo in the centre top of the alv report.Using the reuse_alv_commentry_write the logo is coming in the right side corner of report.
Thanks & Regards,
vijay.

Hi,
Try this out
Build report title
PERFORM build_report_title USING gd_report_title gd_logo.
DATA: gd_logo             TYPE sdydo_value,
*&      Form BUILD_REPORT_TITLE
      Build table for ALVtree header
<-> p1        Header details
<-> p2        Logo value
FORM build_report_title CHANGING
      pt_report_title TYPE slis_t_listheader
      pa_logo             TYPE sdydo_value.
DATA: ls_line TYPE slis_listheader,
        ld_date(10) TYPE c.
List Heading Line(TYPE H)
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-key     "Not Used For This Type(H)
ls_line-info = 'User Message Service'.
APPEND ls_line TO pt_report_title.
Users name (Status Line- TYPE S)
ls_line-typ = 'S'.
ls_line-key = 'Name '.
ls_line-info = gd_myname.
APPEND ls_line TO pt_report_title.
Status Line(TYPE S)
ld_date(2) = sy-datum+6(2).
ld_date+2(1) = '/'.
ld_date3(2) = sy-datum4(2).
ld_date+5(1) = '/'.
ld_date+6(4) = sy-datum(4).
ls_line-typ = 'S'.
ls_line-key = 'Date'.
ls_line-info = ld_date.
APPEND ls_line TO pt_report_title.
Action Line(TYPE A)
CLEAR ls_line.
ls_line-typ = 'A'.
CONCATENATE 'Report: ' sy-repid INTO ls_line-info SEPARATED BY space
APPEND ls_line TO pt_report_title.
ENDFORM.                    "build_report_title
CALL METHOD gd_userlist->set_table_for_first_display
     EXPORTING
               is_hierarchy_header = gd_hierarchy_header
               it_list_commentary   = gd_report_title
<b>              i_logo               = gd_logo</b>
              i_background_id      = 'ALV_BACKGROUND'
               i_save               = 'A'
               is_variant            = gd_variant
     CHANGING
               it_outtab            = it_emptytab      "Must be empty
               it_fieldcatalog      = gd_fieldcat.

To remove the block created by TOP_OF_PAGE event in ALV

hello All,
i have added some code to modify the subtotal in ALV and that code has been added in the TOP_OF_PAGE event of the ALv . and in that case , a blank block is added on the top of the ALV that is consuming almost one third space of the screen.
i dont have any information to pass to the Heading block.
i need to remove that block.
please suggest me how can i achieve that.
Regards
Geeta Gupta

Hi Geetha,
     If you don't have any information to pass the Heading Block, then why you are using this event ?
     please comment/ remove that TOP_OF_PAGE code. and use subtotal code in field catalog block.
      you can use below code for subtotal.
      FORM field_catalog .
                gs_fcat-do_sum = &2.
          fcat : 'WRBTR' '15' 'X' ' ' ' ' 'WRBTR' 'Amount',
       ENDFORM.
       Regards,
       Kunjan

Logo in Object Model ALV ?

Hi Experts
I have a small doubt in object model alv...
Is there any chance to create logo in alv using OBJECT MODEL (CL_SALV_TABLE)..
Regards,
Vamsi

Hey, check this example code:
METHOD alv_set_header.
     DATA: lv_grid   TYPE REF TO cl_salv_form_layout_grid, "Header Layout
           lv_label TYPE REF TO cl_salv_form_label,       "Label
           lv_logo   TYPE REF TO cl_salv_form_layout_logo, "Logo
           lv_text   TYPE REF TO cl_salv_form_text.        "Text
     CREATE OBJECT lv_grid.
     lv_label = lv_grid->create_label(
                  text   = 'Execution Date:'(008)
                  row    = 1
                  column = 1 ).
     lv_text = lv_grid->create_text(
                 text   = sy-datum
                 row    = 1
                 column = 2 ).
     lv_label = lv_grid->create_label(
                  text   = 'Execution Time:'(009)
                  row    = 2
                  column = 1 ).
     lv_text = lv_grid->create_text(
                 text   = sy-uzeit
                 row    = 2
                 column = 2 ).
     lv_label = lv_grid->create_label(
                  text   = 'Responsible:'(010)
                  row    = 3
                  column = 1 ).
     lv_text = lv_grid->create_text(
                 text   = sy-uname
                 row    = 3
                 column = 2 ).
     lv_grid->add_row( ).
     lv_grid->add_row( ).
     lv_grid->add_row( ).
     lv_label = lv_grid->create_label(
                  text   = 'Total Records:'(011)
                  row    = 5
                  column = 1 ).
     lv_text = lv_grid->create_text(
                 text   = me->mv_total
                 row    = 5
                 column = 2 ).
     lv_label->set_label_for( lv_text ).
     CREATE OBJECT lv_logo.
     lv_logo->set_left_content( lv_grid ).
     lv_logo->set_right_logo( 'CUSTOMER_LOGO' ) .
     me->mo_salv_table->set_top_of_list( lv_logo ).
ENDMETHOD.                    "alv_set_header

How to upload logo for alv grid when we are using classes

Hi am using cl_gui_alv_tree for displaying alv grid. i want to upload logo in the heade section. as we do in simple alvs using resuse_alv_commentary_write.
plz update me in this regard.
regards
venkat

Welcome to SDN.
Check the following threads -
How To use TOP OF PAGE event in OOPS ALV?
Logo & TOP_OF_PAGE in OO ALV
Regards,
Amit
Reward all helpful replies.

How to obtain printout of logo used in ALV output?

hello,
I am displaying logo in header of ALV display but when taking print of that display, everything other than logo is displayed.
Can anyone tell me how to get the displayed logo in print?
I am generous in giving points.
Please help.
Yours friendly,
tanaya
Edited by: Tanaya A on Jan 2, 2008 5:48 PM

Hi Tanaya
Pls try this code. it will surely help you.
reward pts if help.
REPORT YMS_EXCISE MESSAGE-ID E4 NO STANDARD PAGE HEADING LINE-SIZE 350. .
TABLES : J_1IEXCHDR, " header table
J_1IEXCDTL, " item table
J_1IPART2, " Excise Part II details
LFA1, " vendor master table
J_1IMOVEND, " vendor excise details table
MSEG, " Document Segment: Material
MKPF, " Header: Material Document
DD07T, " domain text table
T001W. " Plant and Branch Details
DATA : BEGIN OF IT_CHDR OCCURS 100,
DOCNO LIKE J_1IEXCHDR-DOCNO,
DOCYR LIKE J_1IEXCHDR-DOCYR,
EXNUM LIKE J_1IEXCHDR-EXNUM,
EXDAT LIKE J_1IEXCHDR-EXDAT,
WERKS LIKE J_1IEXCHDR-WERKS,
EXBED LIKE J_1IEXCHDR-EXBED,
EXCCD LIKE J_1IEXCHDR-EXCCD,
ECS LIKE J_1IEXCHDR-ECS,
END OF IT_CHDR.
DATA : BEGIN OF IT_CDTL OCCURS 100,
DOCYR LIKE J_1IEXCDTL-DOCYR,
DOCNO LIKE J_1IEXCDTL-DOCNO,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
LIFNR LIKE J_1IEXCDTL-LIFNR,
MATNR LIKE J_1IEXCDTL-MATNR,
MAKTX LIKE J_1IEXCDTL-MAKTX,
CHAPID LIKE J_1IEXCDTL-CHAPID,
EXBAS LIKE J_1IEXCDTL-EXBAS,
EXBED LIKE J_1IEXCDTL-EXBED,
ECS LIKE J_1IEXCDTL-ECS,
MENGE LIKE J_1IEXCDTL-MENGE,
MEINS LIKE J_1IEXCDTL-MEINS,
RDOC2 LIKE J_1IEXCDTL-RDOC2,
END OF IT_CDTL.
DATA TEXT(10).
DATA : BEGIN OF IT_OUT OCCURS 0,
SERIALNO LIKE J_1IPART2-SERIALNO,
TEXT1 LIKE TEXT,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
NAME LIKE LFA1-NAME1,
DDTEXT LIKE DD07T-DDTEXT,
EXCCD LIKE J_1IEXCHDR-EXCCD,
BUDAT LIKE MKPF-BUDAT,
EXBAS LIKE IT_CDTL-EXBAS,
EXBED LIKE IT_CDTL-EXBED,
ECS LIKE IT_CDTL-ECS,
MATNR LIKE IT_CDTL-MATNR,
MAKTX LIKE IT_CDTL-MAKTX,
CHAPID LIKE IT_CDTL-CHAPID,
MENGE LIKE IT_CDTL-MENGE,
MEINS LIKE IT_CDTL-MEINS,
DEL_IND(1),
END OF IT_OUT.
DATA IT_PART2 LIKE J_1IPART2 OCCURS 0 WITH HEADER LINE.
DATA S_NO(4) .
DATA DB_CNT LIKE SY-TABIX.
DATA EBELN_T LIKE MSEG-EBELN .
TYPE-POOLS : SLIS.
DATA : AFIELD TYPE SLIS_FIELDCAT_ALV.
DATA : LIST_HEADER TYPE SLIS_T_LISTHEADER,
FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
LS_FTCAT TYPE LVC_S_FCAT,
SORTCAT TYPE SLIS_T_SORTINFO_ALV,
SORTCAT_LN LIKE LINE OF SORTCAT,
G_REPID LIKE SY-REPID,
G_BACK_GROUND(70), "like bapibds01-objkey,
GS_VARIANT LIKE DISVARIANT,
G_SAVE ,
GT_EVENTS TYPE SLIS_T_EVENT,
ALV_EVENT TYPE SLIS_ALV_EVENT,
EVENTCAT TYPE SLIS_T_EVENT,
EVENTCAT_LN LIKE LINE OF EVENTCAT,
LAYOUT_IN TYPE SLIS_LAYOUT_ALV,
LAYOUT_IN1 TYPE SLIS_LAYOUT_ALV.
CONSTANTS : GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE
'TOP_OF_PAGE',
GC_FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE
'USER_COMMAND',
GC_FORMNAME_BEFORE_OUTPUT TYPE SLIS_FORMNAME VALUE
'BEFORE_OUTPUT'.
ALV_EVENT TYPE SLIS_ALV_EVENT,
DATA EX_NO LIKE IT_CHDR-EXNUM VALUE 0.
DATA REGTYP_1 LIKE J_1IPART2-REGTYP.
SELECTION-SCREEN BEGIN OF BLOCK B WITH FRAME.
PARAMETERS WERKS TYPE J_1IEXCHDR-WERKS.
SELECT-OPTIONS : BUDAT FOR J_1IEXCHDR-EXDAT.
PARAMETERS : R1 RADIOBUTTON GROUP GRP DEFAULT 'X',
R2 RADIOBUTTON GROUP GRP.
SELECTION-SCREEN END OF BLOCK B.
INITIALIZATION.
G_REPID = SY-REPID.
G_SAVE = 'A'.
PERFORM BUILD_EVENT USING GT_EVENTS[].
PERFORM ALV_EVENT_INIT.
AT SELECTION-SCREEN.
REFRESH LIST_HEADER.
PERFORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER.
START-OF-SELECTION.
PERFORM ALV_EVENT_INIT.
G_REPID = SY-REPID.
G_BACK_GROUND = ' ' .
IF R1 = 'X'.
CLEAR R2. CLEAR : REGTYP_1.
REGTYP_1 = 'A'.
set titlebar 'BALAJI' with DB_CNT.
ELSEIF R2 = 'X'.
CLEAR R1.CLEAR : REGTYP_1.
REGTYP_1 = 'C'.
set titlebar 'BALAJI1' with DB_CNT.
ENDIF.
SELECT * FROM J_1IPART2
INTO CORRESPONDING FIELDS OF TABLE IT_PART2
WHERE REGTYP = REGTYP_1 AND
TRNTYP = 'GRPO' AND
BUDAT IN BUDAT.
DOCYR = IT_CDTL-DOCYR AND
DOCNO = IT_CDTL-DOCNO.
LOOP AT IT_PART2.
SELECT SINGLE * FROM J_1IEXCHDR
INTO CORRESPONDING FIELDS OF IT_CHDR
WHERE TRNTYP = 'GRPO' AND
DOCYR = IT_PART2-DOCYR AND
DOCNO = IT_PART2-DOCNO AND
WERKS = WERKS AND
exdat IN BUDAT.
ORDER BY EXDAT.
IF SY-SUBRC = 0.
APPEND IT_CHDR.
ELSE.
CONTINUE.
ENDIF.
IF SY-SUBRC <> 0.
MESSAGE E084.
ENDIF.
ENDLOOP.
LOOP AT IT_CHDR.
SELECT * FROM J_1IEXCDTL
INTO CORRESPONDING FIELDS OF IT_CDTL
FOR ALL ENTRIES IN IT_CHDR
WHERE
TRNTYP = 'GRPO' AND
DOCNO = IT_CHDR-DOCNO AND
DOCYR = IT_CHDR-DOCYR AND
EXNUM = IT_CHDR-EXNUM AND
EXDAT = IT_CHDR-EXDAT AND
WERKS = IT_CHDR-WERKS.
IF SY-SUBRC = 0.
APPEND IT_CDTL.
ELSE.
CONTINUE.
ENDIF.
ENDSELECT.
ENDLOOP.
LOOP AT IT_CDTL.
CLEAR TEXT.
DB_CNT = DB_CNT + 1.
READ TABLE IT_CHDR WITH KEY EXNUM = IT_CDTL-EXNUM.
READ TABLE IT_PART2 WITH KEY DOCNO = IT_CDTL-DOCNO .
IT_OUT-SERIALNO = IT_PART2-SERIALNO.
SELECT SINGLE NAME1 FROM LFA1
INTO IT_OUT-NAME
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM LFA1
WHERE LIFNR = IT_CDTL-LIFNR.
IF LFA1-LAND1 EQ 'IN'.
TEXT = 'INVOICE'.
IT_OUT-TEXT1 = TEXT.
ELSE.
TEXT = 'BOE'.
IT_OUT-TEXT1 = TEXT.
ENDIF.
SELECT SINGLE * FROM J_1IMOVEND
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM DD07T
INTO IT_OUT-DDTEXT
WHERE DOMNAME = 'J_1IVTYP' AND
DDLANGUAGE = 'EN' AND
DOMVALUE_L = J_1IMOVEND-J_1IVTYP.
IF DD07T-DDTEXT = 'First Stage Dealer of indigenous excisable goods'
OR
DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisablegoods'.
DD07T-DDTEXT = 'Dealer'.
ENDIF.
IT_OUT-DDTEXT = DD07T-DDTEXT.
ELSEIF DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisable
*goods'.
DD07T-DDTEXT =
CLEAR EBELN_T.
SELECT SINGLE LFBNR FROM MSEG
INTO EBELN_T
WHERE MBLNR = IT_CDTL-RDOC2 .
SELECT SINGLE * FROM MSEG
WHERE BWART = '106' AND
LFBNR = EBELN_T ."and
ebeln = ebeln_t.
IF SY-SUBRC = 0.
IT_OUT-DEL_IND = 'X'.
ELSE.
IT_OUT-DEL_IND = ' '.
ENDIF.
SELECT SINGLE BUDAT FROM MKPF
INTO IT_OUT-BUDAT
WHERE MBLNR = EBELN_T ."MSEG-LFBNR.
IT_OUT-EXNUM = IT_CDTL-EXNUM.
IT_OUT-EXDAT = IT_CDTL-EXDAT.
IT_OUT-EXCCD = IT_CHDR-EXCCD.
IT_OUT-EXBAS = IT_CDTL-EXBAS.
IT_OUT-EXBED = IT_CDTL-EXBED.
IT_OUT-ECS = IT_CDTL-ECS.
IT_OUT-MATNR = IT_CDTL-MATNR.
IT_OUT-MAKTX = IT_CDTL-MAKTX.
IT_OUT-CHAPID = IT_CDTL-CHAPID.
IT_OUT-MENGE = IT_CDTL-MENGE.
IT_OUT-MEINS = IT_CDTL-MEINS.
APPEND IT_OUT.
EX_NO = IT_CDTL-EXNUM.
ENDLOOP.
Title Portion
IF REGTYP_1 = 'A'.
SET TITLEBAR 'BALAJI' WITH DB_CNT.
ELSEIF REGTYP_1 = 'C'.
SET TITLEBAR 'BALAJI1' WITH DB_CNT.
ENDIF.
AFIELD-COL_POS = 1.
AFIELD-FIELDNAME = 'SERIALNO'.
AFIELD-SELTEXT_L = 'INPUTS'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 2.
AFIELD-FIELDNAME = 'TEXT1'.
AFIELD-SELTEXT_L = 'TYPE OF DOC'.
AFIELD-JUST = 'L'.
AFIELD-DECIMALS_OUT = '0'.
AFIELD-NO_ZERO = 'X'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 3.
AFIELD-FIELDNAME = 'EXNUM'.
AFIELD-SELTEXT_L = 'DOC.NO'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 4.
AFIELD-FIELDNAME = 'EXDAT'.
AFIELD-SELTEXT_L = 'DOC.DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 5.
AFIELD-FIELDNAME = 'NAME'.
AFIELD-SELTEXT_L = 'NAME OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 6.
AFIELD-FIELDNAME = 'DDTEXT'.
AFIELD-SELTEXT_L = 'TYPE-OF-SUPPLIER'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 7.
AFIELD-FIELDNAME = 'EXCCD'.
AFIELD-SELTEXT_L = 'ECC OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 8.
AFIELD-FIELDNAME = 'BUDAT'.
AFIELD-SELTEXT_L = 'INPUT RECV DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 9.
AFIELD-FIELDNAME = 'EXBAS'.
AFIELD-SELTEXT_L = 'ASSESSABLE-VALUE'.
AFIELD-DO_SUM = 'X'.
AFIELD-JUST = 'R'.
AFIELD-DECIMALS_OUT = '2'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 10.
AFIELD-FIELDNAME = 'EXBED'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN CENVAT'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 11.
AFIELD-FIELDNAME = 'ECS'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN E-CESS'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 12.
AFIELD-FIELDNAME = 'MATNR'.
AFIELD-SELTEXT_L = 'MATERIAL-CODE'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 13.
AFIELD-FIELDNAME = 'MAKTX'.
AFIELD-SELTEXT_L = 'DESCRIPTION'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 14.
AFIELD-FIELDNAME = 'CHAPID'.
AFIELD-SELTEXT_L = 'TARIFF-ID'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 15.
AFIELD-FIELDNAME = 'MENGE'.
AFIELD-SELTEXT_L = 'QUANTITY'.
AFIELD-JUST = 'R'.
AFIELD-DO_SUM = ' '.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 16.
AFIELD-FIELDNAME = 'MEINS'.
AFIELD-SELTEXT_L = 'UOM'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 17.
AFIELD-FIELDNAME = 'DEL_IND'.
AFIELD-SELTEXT_L = 'Deleted'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
* LAYOUT FOR ZEBRA CATLOG
LAYOUT_IN-COLWIDTH_OPTIMIZE = 'X'.
LAYOUT_IN-ZEBRA = 'X'.
LAYOUT_IN-GET_SELINFOS = 'X'.
LAYOUT_IN-CONFIRMATION_PROMPT = 'X'.
LAYOUT_IN-DETAIL_POPUP = 'X' .
SORTCAT-decimals = '0'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_SAVE = G_SAVE
IS_VARIANT = GS_VARIANT
IT_FIELDCAT = FIELDCAT
IT_SORT = SORTCAT
IS_LAYOUT = LAYOUT_IN
IT_EVENTS = EVENTCAT
I_BACKGROUND_ID = g_back_ground
TABLES
T_OUTTAB = IT_OUT.
*& Form TOP_OF_PAGE_LIST_HEADER
text
-->LIST_HEADERtext
FORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER TYPE SLIS_T_LISTHEADER.
DATA : HLINE TYPE SLIS_LISTHEADER,
TEXT(60) TYPE C.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'ROOTS INDUSTRIES LTD' TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
SELECT SINGLE * FROM T001W WHERE WERKS = WERKS.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'PLANT :' TO TEXT.
WRITE WERKS TO TEXT+8.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-NAME1 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-STRAS TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-ORT01 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'DATE :' TO TEXT.
WRITE BUDAT-LOW TO TEXT+7.
IF BUDAT-HIGH NE ''.
WRITE 'TO' TO TEXT+18.
WRITE BUDAT-HIGH TO TEXT+22.
ENDIF.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
ENDFORM. "TOP_OF_PAGE_LIST_HEADER
*& Form ALV_EVENT_INIT
text
FORM ALV_EVENT_INIT .
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_PAGE.
ALV_EVENT-FORM = 'ALV_TOP_OF_PAGE'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_LIST.
ALV_EVENT-FORM = 'ALV_TOP_OF_LIST'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_LIST.
ALV_EVENT-FORM = 'ALV_END_OF_LIST'.
APPEND ALV_EVENT TO GT_EVENTS.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_PAGE.
ALV_EVENT-FORM = 'ALV_END_OF_PAGE'.
APPEND ALV_EVENT TO GT_EVENTS.
ENDFORM. "ALV_EVENT_INIT
*& Form ALV_TOP_OF_PAGE
text
FORM ALV_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = LIST_HEADER
I_LOGO = 'ENJOYSAP_LOGO'.
ENDFORM. "ALV_TOP_OF_PAGE
*& Form BUILD_EVENT
text
-->P_GT_EVENTS[] text
FORM BUILD_EVENT USING P_EVENTS TYPE SLIS_T_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = P_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_USER_COMMAND TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_BEFORE_LINE_OUTPUT INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_BEFORE_OUTPUT TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
ENDFORM. " BUILD_EVENT
Reward pts if help.

ALV REPORT BY USING TOP_OF_PAGE

HI,
firends i want the code for the top_of_page procedure in ALV REPORT,
SO i can display data on top of my report .
REGARDS
SHAFEEQ AHMED

hi,
check this...
REPORT ZTEST .
type-pools: slis.
data: x_fieldcat type slis_fieldcat_Alv,
      it_fieldcat type slis_t_fieldcat_alv,
      x_events type slis_alv_event,
      it_events type SLIS_T_EVENT.
data: begin of itab occurs 0,
       vbeln like vbak-vbeln,
       posnr like vbap-posnr,
      end of itab.
select vbeln
       posnr
       from vbap
       up to 100 rows
       into table itab.
x_events-name = 'TOP_OF_PAGE'.
x_events-form = 'TOP_OF_PAGE'.
append x_events to it_events.
clear x_events.
call function 'REUSE_ALV_EVENTS_GET'
EXPORTING
   I_LIST_TYPE           = 0
IMPORTING
   ET_EVENTS             = IT_EVENTS
EXCEPTIONS
   LIST_TYPE_WRONG       = 1
   OTHERS                = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
read table it_events into x_events with key name = 'TOP_OF_PAGE'.
     if sy-subrc = 0.
     x_events-form = 'TOP_OF_PAGE'.
     modify it_events from x_events index sy-tabix transporting form .
     endif.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
   I_PROGRAM_NAME               = sy-repid
   I_INTERNAL_TABNAME           = 'ITAB'
   I_INCLNAME                   = sy-repid
changing
    ct_fieldcat                  = IT_FIELDCAT
EXCEPTIONS
   INCONSISTENT_INTERFACE       = 1
   PROGRAM_ERROR                = 2
   OTHERS                       = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM                = sy-repid
    I_CALLBACK_PF_STATUS_SET          = 'STATUS'
    I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
    IT_FIELDCAT                       = IT_FIELDCAT
    IT_EVENTS                         = IT_EVENTS
    tables
     t_outtab                         = ITAB[]
EXCEPTIONS
    PROGRAM_ERROR                     = 1
    OTHERS                            = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
FORM TOP_OF_PAGE.
    DATA: LS_LINE TYPE SLIS_LISTHEADER,
          E04_LT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
Listenüberschrift: Typ H
    CLEAR LS_LINE.
    LS_LINE-TYP = 'H'.
LS_LINE-KEY: not used for this type
    LS_LINE-INFO = 'Summary'.
    APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
Kopfinfo: Typ S
    CLEAR LS_LINE.
    LS_LINE-TYP = 'S'.
    LS_LINE-KEY = 'Test'.
    LS_LINE-INFO = ''.
    APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
    LS_LINE-KEY = 'ASIA'.
    LS_LINE-INFO = 'test'.
    APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
Aktionsinfo: Typ A
    CLEAR LS_LINE.
    LS_LINE-TYP = 'A'.
LS_LINE-KEY: not used for this type
    LS_LINE-INFO = TEXT-105.
    APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
      EXPORTING
        IT_LIST_COMMENTARY = E04_LT_TOP_OF_PAGE
        I_LOGO             = 'ENJOYSAP_LOGO'.
ENDFORM.

How to Place a LOGO on Selection screen & Output list -OO ALV

Hi,
I was just wondering can we place a logo on standard Selection screen 1000?
And also on the Output list . I am using OO ABAP for my ALV.
regards
Praveen

Hi,
You cannot place a logo in your selection-screen.
But yes, you can place logos in your OO ALV.
data:       ws_c_logo      TYPE REF TO cl_dd_area.
                                                  "Instance for the logo
Split your document container for logo
   CALL METHOD wcl_docum->vertical_split
           EXPORTING split_area = wcl_docum
                     split_width = '70%'
           IMPORTING right_area = ws_c_logo.
then,
CALL METHOD ws_c_logo->add_picture
          EXPORTING picture_id = c_logo.
where:      c_logo TYPE sdydo_key VALUE 'CC0040' . "logo for co.code 0040
The image should be stored in your business document. You may use BDS_OBJECT_SAVE or BDS_BUSINESSDOCUMENT_CREATEF to store the image in the business document server and then retrieve in your ALV.
Regards
Subramanian

Resizing logo in ALV report

Hi,
Is there an option to change the resolution of a logo at runtime in ALV report (as can be done in scripts and forms) ?
The logo is being printed in the header of the ALV.
Please let me know.
Thanks,
Dawood.

Hi,
Is there an option to change the resolution of a logo at runtime in ALV report (as can be done in scripts and forms) ?
The logo is being printed in the header of the ALV.
Please let me know.
Thanks,
Dawood.

What is alv report?

hi guys, i would like to know the functionality of ALV reports.Please help me in this regard.
reward points if answered.
thanks in advance.

Hi,
ALV is ABAP LIST VIEWER.
To have more functionalities like totals, subtotals,logos,etc we choose ALVs compared to reports.
Check this:
Documentation on alv:
you can check out:
http://www.****************/Tutorials/ALV/ALVMainPage.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
ABAP List Viewer
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
This helps us to implement all the features mentioned very effectively.
Using ALV, We can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
There are some function modules which will enable to produce the above reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to
populate a fieldcatalog which is essential to display the data in ALV.
If the output data is from a single dictionary table and all the
columns are selected, then we need not exclusively create the field cat
alog. Its enough to mention the table name as a parameter
(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases
we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
some theory regarding alv:
This table tells ALV which events are processed by the caller by CALLBACK.
The table of possible events per list type can be initialized using the module REUSE_ALV_EVENTS_GET.
You can display the names of the constants in the type pools SLIS which represent the individual events using the individual test function in the function module
REUSE_ALV_EVENT_NAMES_GET. Only events with a form routine name are processed.
The table structure contains the fields:
IT_EVENTS-NAME
Name of the Callback event.
Possible Callback events:
Action
USER_COMMAND USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE SLIS_SELFIELD
Process actions on the list
As this is a frequently-used Callback event, the form routine can also be passed directly in the interface in the IMPORTING parameter I_CALLBACK_USER_COMMAND.
PF_STATUS_SET USING RT_EXTAB TYPE SLIS_T_EXTAB
If a user list status is to be set, it must be done in the form routine assigned to this event. The ALV function codes, which must not be active, are in the Parameter RT_EXTAB. This table must be passed with the SET PF-STATUS command (with inactive user function codes as well, if necessary).
The STANDARD status of the function group SALV should be used as a template for a user-specific status.
As this is a frequently-used Callback event, its form routine can also be passed directly in the interface in the IMPORTING parameter I_CALLBACK_PF_STATUS_SET.
ITEM_DATA_EXPAND USING RS_SELFIELD TYPE SLIS_SELFIELD RFLG_ALL TYPE C
Only relevant for hierarchical-sequential lists using the layout parameter IS_LAYOUT-EXPAND_FIELDNAME of the structure IS_LAYOUT.
Exit for passing item entries (ITEM table) for a header record which was expanded interactively by the user.
RS_SELFIELD-TABINDEX contains the header table index for which the item entries are to be put in the global item output table (T_OUTTAB_SLAVE). The Callback is only called if ALV has no items for a header which is to be expanded.
RFLG_ALL is passed with 'X' if the user shows all items. The application must ensure that entries are not repeated in the item table. RS_SELFIELD is initial in this case.
CALLER_EXIT USING RS_DATA Is called at the beginning of the function module to make special settings. It is not usually used.
List processing events
IMPORTANT: The application Callback routine must not manipulate the internal output table and/or its header record. This restriction applies to all Callbacks which are called in the list output and run under the 'List processing events'.
TOP_OF_LIST no USING parameter. Information output at the start of the list
END_OF_LIST no USING parameter. Information output at the end of the list
TOP_OF_PAGE no USING parameter
Equivalent to the list processing TOP-OF-PAGE event
END_OF_PAGE no USING parameter. Not available for hierarchical-sequential lists.
Information output at the end of a page. This is only called for printing.
TOP_OF_COVERPAGE no USING parameter
The selection information and list status are output together (if they exist) on a separate page by default. See also the documentation of the parameters:
IS_PRINT-NO_COVERPAGE
IS_PRINT-NO_PRINT_SELINFOS
IS_PRINT-NO_PRINT_LISTINFOS
IS_LAYOUT-GET_SELINFOS
The user can format the header area of the 'cover page' himself or herself by specifying a Callback routine for this event.
END_OF_COVERPAGE no USING parameter
Analogously to TOP_OF_COVERPAGE the user can add other information to the information output by ALV (selection information, list status) at this event.
FOREIGN_TOP_OF_PAGE no USING parameter
The Top-of-page event is always processed in ALV and is only passed to the caller via the Callback mechanism. This is still the case if the caller, e.g. by a user action, processes a branch list which was not formatted by ALV (e.g. a popup with additional information about the list record selected and displayed by ALV).
In this case, top-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event top-of-page still occurs in ALV. When ALV notices a top-of-page which was not caused by an ALV output, the form routine in FOREIGN_TOP_OF_PAGE is called.
FOREIGN_END_OF_PAGE no USING parameter
The event end-of-page is always processed in ALV and only passed to the caller via callback. This is still the case, e.g. when the caller processes a details list which was not formatted by ALV (e.g. a popup with further information about selected list records which were displayed by ALV).
In this case, end-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event end-of-page still occurs in ALV. When ALV notices an end-of-page that was not caused by an ALV output, the form routine in FOREIGN_END_OF_PAGE is called.
BEFORE_LINE_OUTPUT USING RS_LINEINFO TYPE SLIS_LINEINFO
Output information before each output line. Should only be used in justified cases because it costs a lot of performance.
AFTER_LINE_OUTPUT USING RS_LINEINFO TYPE SLIS_LINEINFO
Output information after each output line. Should only be used in justified cases because it costs a lot of performance.
Internal use only
LIST_MODIFY USING R_TABNAME TYPE SLIS_TABNAME
R_INDEX LIKE SY-TABIX
R_INDEX_ITEM LIKE SY-TABIX
R_INDEX_SUM LIKE SY-TABIX
IT_EVENTS-FORM
Name of the form routine which should be called in the calling program at the event.
Field_catalog:
Field catalog with field descriptions
2.7.1. Description
Field catalog containing descriptions of the list output fields (usually a subset of the internal output table fields). A field catalog is required for every ALV list output.
The field catalog for the output table is built-up in the caller's coding. The build-up can be completely or partially automated by calling the REUSE_ALV_FIELDCATALOG_MERGE module
See also the documentation of the function module REUSE_ALV_FIELDCATALOG_MERGE.
The minimal field catalog is documented under 'default'. The caller can use the other optional parameters to assign output attributes to a field which differ from the default.
A field catalog need not be built-up and passed explicitly only under the following conditions:
The internal table to be output has the same structure as a Data Dictionary structure which is referred to in the internal table declaration using LIKE or INCLUDE STRUCTURE.
all fields in this structure are to be output
the structure name is passed to ALV in the parameter I_STRUCTURE_NAME.
See also the documentation of the IMPORTING paramter I_STRUCTURE_NAME.
Positioning
row_pos (row position)
value set: 0, 1 - 3
Only relevant if the list output is to be multi-line (two or three lines) by default.
A multi-line list can also be defined by the user interactively if the default list is one-line.
The parameter specifies the relative output line of the column in a multi-line list.
col_pos (column position)
value set: 0, 1 - 60
only relevant when the default relative column positions differ from the field catalog field sequence. The parameter specifies the relative column position of the field in the list output. The column order can be changed interactively by the user. If this parameter is initial for all field catalog entries, columns appear in the field catalog field sequence.
Identification
fieldname (field name)
value set: internal output table field name (required parameter)
Name of the internal output table field which is described by this field catalog entry
tabname (internal output table)
value set: SPACE, internal output table name
This parameter is used in 'manual' field catalog build-up only for hierarchical-sequential lists.
Name of the internal output table which contains the field FIELDCAT-FIELDNAME.
Data Dictionary reference
ref_fieldname (reference field name)
value set: SPACE, Data Dictionary field name
Name of the Data Dictionary field referred to.
This parameter is only used when the internal output table field described by the current field catalog entry has a reference to the Data Dictionary (not a program field), and the field name in the internal output table is different from the name of the field in the Data Dictionary. If the field names are identical, naming the Data Dictionary structure or table in the FIELDCAT-REF_TABNAME parameter is sufficient.
ref_tabname (reference table/structure field name)
value set: SPACE, name of a Data Dictionary structure or table
Structure or table name of the referred Data Dictionary field.
This parameter is only used when the internal output table field described by the current field catalog entry has a Data Dictionary reference (not a program field).
Reference to fields with currency/measurement unit
Each internal output table sum or quantity field whose decimal places are to be formatted appropriately for the unit in the list must follow the convention:
the field is of data type QUAN or CURR (internal type P) (the field must really have this physical data type. Overwriting the physical data type with the parameter FIELDCAT-DATATYPE has no effect)
There is a field in the internal output table which contains the associated unit.
There is also an entry in the field catalog for the unit field.
(If the unit is not to appear as a column in the list, and cannot be interactively displayed as a column, e.g. because it is always unambiguous and is therefore explicitly output by the caller in the list header, the field catalog units field entry can take the parameter FIELDCAT-TECH = 'X'.
The association of a value field to a unit affects the output as follows:
appropriate decimal places display for the unit
an initialized field with a link to a non-initial unit is output as '0' for the unit (if FIELDCAT-NO_ZERO is initial). When this field is summed, this unit affects whether the units are homogeneous.
an initialized field with a link to an initial unit is output as SPACE. When this field is summed, the unit SPACE does not affect the homogeneity of the units.
When non-initial fields with an initial unit are summed, the unit SPACE is considered to be a unit.
Link to currency unit
cfieldname (currency unit field name)
value set: SPACE, output table field name
Only relevant for amount columns with associated unit.
Name of the internal output table field containing the currency unit associated with the amount field FIELDCAT-FIELDNAME. The field in FIELDCAT-CFIELDNAME must have its own field catalog entry.
ctabname (internal currency unit field output table)
value set: SPACE, output table field name
only relevant for hierarchical-sequential lists
Name of the internal output table containing the FIELDCAT-CFIELDNAME field.
Link to measurement unit
qfieldname (measurement unit field name)
value set: SPACE, output table field name
only relevant for quantity columns with unit link.
Name of the internal output table field containing the measurement unit associated with the quantity field FIELDCAT-FIELDNAME.
The field in FIELDCAT-QFIELDNAME must have its own field catalog entry.
qtabname (internal measurement unit field output table)
value set: SPACE, output table field name
only relevant for hierarchical-sequential lists
Name of the internal output table containing the FIELDCAT-QFIELDNAME field.
Column output options
outputlen (column width)
value set: 0 (initial), n
For fields with a Data Dictionary link this parameter can be left initial.
For fields without a Data Dictionary link (program field) the parameter must be given the value of the desired field list output length (column width).
initial = column width is the output length of the referred Data Dictionary field (domain).
n = column width is n characters
key (key column)
value set: SPACE, 'X' 'X' = kex field (key field output in color)
Key fields can not be interactively hidden. Parameter FIELDCAT-NO_OUT must be left initial.
For exceptions see the documentation of the FIELDCAT-KEY_SEL parameter.
key_sel (hideable key column)
value set: SPACE, 'X'
only relevant when FIELDCAT-KEY = 'X'
Key field which can be hidden interactively.
The key column sequence cannot be changed interactively by the user.
The output is controlled by the FIELDCAT-NO_OUT parameter analogously to non-key fields.
no_out (field in field list)
value set: SPACE, 'X' 'X' = field is not displayed in the current list.
The user can interactively choose the field for output from the field list.
The user can display the contents of these fields at line level using the 'Detail' function.
See also the 'Detail screen' documentation of the parameter IS_LAYOUT.
tech (technical field)
value set: SPACE, 'X' 'X' = technical field
Field cannot be output in the list and cannot be displayed interactively.
Field can only be used in the field catalog (not in IT_SORT, ...).
emphasize (highlight columns in color)
value set: SPACE, 'X' or 'Cxyz' (x:'1'-'9'; y,z: '0'=off '1'=on)
'X' = column is colored with the default column highlight color.
'Cxyz' = column is colored with a coded color:
C: Color (coding must begin with C)
x: color number
y: bold
z: inverse
hotspot (column as hotspot)
value set: SPACE, 'X'
'X' = column cells are output as hotspots
fix_column (fix column)
value set: SPACE, 'X'
Not relevant for block lists (output of several lists consecutively)
'X' = column fixed (does not scroll horizontally)
All columns to be fixed must have this flag, starting from the left. If a column without this flag is output, only the columns to the left of this column are fixed. The user can change the column fixing interactively. See also the documentation of the Layout parameter
IS_LAYOUT-NO_KEYFIX of the IMPORTING paramter IS_LAYOUT.
do_sum (sum over column)
value set: SPACE, 'X' 'X' = a sum is to be calculated over this internal output table field.
This function can also be called by the user interactively.
no_sum (sums forbidden)
value set: SPACE, 'X' 'X' = no sum can be calculated over this field, although the data type of the field would allow summing.
input (column ready for input)
Function not available
Format column contents
icon
value set: SPACE, 'X' 'X' = column contents to be output as an icon.
The caller must consider the printability of icons.
symbol
value set: SPACE, 'X' 'X' = column contents are to be output as a symbol.
The internal output table column must be a valid symbol character.
The caller must consider the printability of symbols.
Symbols can usually be printed, but may not always be output correctly, depending on the printer configuration.
just (justification)
value set: SPACE, 'R', 'L', 'C'
Only relevant for fields of data type CHAR or NUMC
' ' = default justification for this data type
'R' = right-justified output
'L' = left-justified output
'C' = centered output
The justification of the column header always follows the justification of the columns. Independent justification of the column neader is not possible.
lzero (leading zeros)
value set: SPACE, 'X'
Only relevant for fields of data type NUMC
ALV outputs NUMC fields right-justified without leading zeros by default.
'X' = output with leading zeros
Note: If a NUMC field is output left-justified or centered by FIELDCAT-JUST, leading zeros are output. If the output of leading zeros is suppressed by a Data Dictionary reference ALPHA conversion exit, the output is always left-justified.
no_sign (no +/- sign) Only relevant for value fields
value set: SPACE, 'X' 'X' = value output without +/ sign
no_zero (suppress zeros) Only relevant for value fields
value set: SPACE, 'X' 'X' = suppress zeros
edit_mask (field formatting)
value set: SPACE, template
template = see documentation of WRITE formatting option USING EDIT MASK template
The output conversion conv can be made by template = '== conv'.
Texts
The following text parameters should be specified for program fields without a Data Dictionary reference. The texts are taken from the Data Dictionary for fields with a Data Dictionary reference. If this is not desired, the text parameters can also be specified. The Data Dictionary texts are then ignored. If the user changes the column width interactively, the column header text with the appropriate length is always used. The interactive function 'Optimize column width' takes account of both the field contents and the column headers: if all field contents are shorter than the shortest column header, the column width depends on the column header.
The 'long field label' is also used in display variant definition, sort, etc. popups.
seltext_l (long field label)
seltext_m (medium field label)
seltext_s (short field label)
reptext_ddic (header)
analogous to the Data element maintenance 'Header'
The specified text is not necessarily output in the list, an optimum among all texts is sought.
ddictxt (specify text)
value set: SPACE, 'L', 'M', 'S'
You can specify with values 'L', 'M', and 'S', the keyword that should always be used as column header. If the column width changes, no attempt is made in this case to find an appropriate header for the new output width.
Parameters for program fields without Data Dictionary reference
see also 'Text' parameters
datatype (data type)
value set: SPACE, Data Dictionary data type (CHAR, NUMC,...)
Only relevant for fields without Data Dictionary reference
Program field data type
ddic_outputlen (external output length)
value set: 0 (initial), n
Only relevant for fields without Data Dictionary reference whose output is nevertheless to be modified by a conversion exit.
Prerequisites:
FIELDCAT-EDIT_MASK = '==conv'
see also the documentation of the parameter FIELDCAT-EDIT_MASK
FIELDCAT-INTLEN = n
see also the documentation of the parameter FIELDCAT-INTLEN
n = external format field output length
The column width FIELDCAT-OUTPUTLEN need not be the same as the external format output length (FIELDCAT-DDIC_OUTPUTLEN).
intlen (internal output length)
value set: 0 (initial), n
Only relevant for fields without Data Dictionary reference whose output is nevertheless to be modified by a conversion exit.
Prerequisites:
FIELDCAT-EDIT_MASK = '==conv'
see also the documentation of the parameter FIELDCAT-EDIT_MASK
FIELDCAT-DDIC_OUTPUTLEN = n
see also the documentation of the parameter FIELDCAT-DDIC_OUTPUTLEN
n = internal format field output length
rollname (data element)
value set: SPACE, Data Dictionary data element name
F1 help can be provided for a program field without a Data Dictionary reference, or F1 help which differs from the Data Dictionary help can be provided for a field with a Data Dictionary reference, using this parameter.
When F1 help is called for this field, the documentation of the specified data element is displayed.
If the FIELDCAT-ROLLNAME is initial for fields with a Data Dictionary reference, the documentation of the data element of the referred Data Dictionary field is output.
Others
sp_group (field group key)
value set: SPACE, CHAR(1)
Field group key.
Keys are assigned to group names in the IT_SPECIAL_GROUPS parameter (see also the documentation of the parameter IT_SPECIAL_GROUPS).
When such an assignment is made in the field catalog and in IT_SPECIAL_GROUPS, the fields are grouped correspondingly in the display variant popup.
reprep (Report/Report interface selection criterion)
value set: SPACE, 'X'
Prerequisites:
The system contains the Report/Report interface (function group RSTI, table TRSTI)
Parameter LAYOUT-REPREP = 'X'
(see also the documentation of the parameter LAYOUT-REPREP of the IMPORTING parameter IS_LAYOUT )
'X' = When the Report/Report interface is called, the value of this field is passed in the selected interface start record as a selection criterion.
2.7.2. Default
The following entries are usually sufficient for internal table fields with a reference to a field defined in the Data Dictionary :
fieldname
ref_tabname
Notes:
ALV gets the remaining information from the Data Dictionary.
If no relative column position (COL_POS) is specified, the fields are output in the list in the order in which they were added to the field catalog.
REF_FIELDNAME need only be specifid when the name of the internal table field differs from the name of the referred Data Dictionary field.
Information which is explicitly entered in the field catalog is not overwritten by information from the Data Dictionary.
Priority rule:
Entries in the field catalog have priority over differing entries in the Data Dictionary.
The following entries are usually sufficient for internal table fields without a reference to the Data Dictionary (program fields):
fieldname
outputlen
datatype
seltext_s
seltext_m
seltext_l
Notes:
F1 help can be provided for program fields by assigning a data element to the parameter ROLLNAME.
If the parameters SELTEXT_S, SELTEXT_M, SELTEXT_L, and REPTEXT_DDIC contain appropriate field labels, the program field column headers are also adjusted appropriately when the column width changes
sites :
http://www.sapdevelopment.co.uk/reporting/alv/alv_variousfcat.htm
Check out these links : top one is on slis specifcally,
How to know about these SLIS types?
Re: sap alv examples
ALV reporting - Step by step
http://help.sap.com/saphelp_nw04/helpdata/en/8d/e994374c9cd355e10000009b38f8cf/frameset.htm
Go through with these links :
ALV
http://www.geocities.com/mpioud/Abap_programs.html
ALV Group Heading
http://www.sap-img.com/fu037.htm
ALVGRID with refresh
http://www.geocities.com/mpioud/Z_DEMO_ALV_REFRESH_BUTTON.htm
Editable ALV
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20edit%20alv%20grid.doc
-->download the PDF from following link.
www.abap4.it/download/ALV.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf
OOPS ALV tutorial.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
Sample programs:
http://www.geocities.com/victorav15/sapr3/abap_ood.html#d_grid
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_color.htm
http://www.sapdevelopment.co.uk/reporting/alvhome.htm
You can get all demo programs for ALV:
Go to se38 and type BCALV* and press F4 for all demo porgrams.
Check out these links
http://www.sap-img.com/abap/what-is-alv-programming.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/alv&
http://www.sap-img.com/abap/an-interactive-alv-report.htm
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/cs/user/view/cs_msg/18628
Regards

OOP's ALV : Download to excel issue

Hi All,
I am using oops ALV in a report .
I need to implement it in such a way that when user export the list to excel
1. Downloaded excel should also contain the data printed in top- of-page followed by the grid data.
i.e some desired records followed by the main records.
I am able to display the output data as desired, But when I download data to excel, it gives only records
from grid and not the top-of-page data.
Please let me know how to solve this ?
Do I need to change approach?
Thanks in Advance.

Hi,
To display the top of page in ALV FM we use the TOP_OF_PAGE event to display the data. But in Oop's Concept if you populate the data in TOP_OF_PAGE event the data will not be displayed in ALV layout but when print preview or print then you can see the TOP_OF_PAGE data.
So to show the data on the ALV layout we use the split conatainer concept. Split the container in two and display ALV in below container and TOP_OF_PAGE in top container.
Apart from having above you still populate the TOP_OF_PAGE event of ALV. This will be come into picture in case of download,Print priview & Print.

Put logo in executable program

hi friends ,
i want to put logo in report( not alv report) and not in selection screen. i want put it on output.

hi,
IT IS POSSIBL USING OOPS CONCEPT GO FOR THIS CODE:--
REPORT y_pic_show .
DATA:
docking TYPE REF TO cl_gui_docking_container,
picture_control_1 TYPE REF TO cl_gui_picture,
url(256) TYPE c .
DATA : sum(4) , num1(4) , num2(4).
PARAMETERS: p_dummy(4) DEFAULT '4' .
PARAMETERS: p_dummy1(4) DEFAULT '5' .
AT SELECTION-SCREEN OUTPUT.
PERFORM show_pic.
START-OF-SELECTION.
num1 = p_dummy.
num2 = p_dummy1.
sum = num1 + num2.
WRITE : / sum.
*& Form show_pic
FORM show_pic.
DATA: repid LIKE sy-repid.
repid = sy-repid.
CREATE OBJECT picture_control_1 EXPORTING parent = docking.
CHECK sy-subrc = 0.
CALL METHOD picture_control_1->set_3d_border
EXPORTING
border = 5.
CALL METHOD picture_control_1->set_display_mode
EXPORTING
display_mode = cl_gui_picture=>display_mode_stretch.
CALL METHOD picture_control_1->set_position
EXPORTING
height = 150
left = 700
top = 10
width = 138.
CALL METHOD picture_control_1->load_picture_from_url
EXPORTING
url = 'PIX PATHNAME'.
IF sy-subrc NE 0.
Fehlerbehandlung
ENDIF.
ENDFORM. "show_pic
Hope this helps, Do reward.

Help needed regarding ALV

hi All,
I am very new to ABAP.
I got a requirement to modify already existing program like , I need to display 5 columns in the ALV Grid basing on a condition i.e., there will be a checkbox on the selection screen. When the cehckbox is checked, hten i should display the 5 columns o n the ALV Grid.
The existing program has a code which is calling the ALV_GRID_DISPLAY function module and the parameters passed are the program and then the structure in se11. The structure contains 30 fields and in the ALV grid , all the 30 fields are displayed.
Now, I need to write the code to add my 5 fields to the already existing ALV Grid display.
when i asked my frnds, they told me to add the 5 fields in the structure taht the program is already using. But , there is a problem. Even though the checkbox is not checked, the empty 5 columns are displayed on the grid as they are already added in the structure. But, we want the 5 columns only when the checkbox on the selction screen is checked.
Please help me out in provding me the code. The program is not using any fieldcatalog. Do i need to addit?
How can i proceedfurther? I am already stuck with it. Please help me out as it is a v urgent requirement.
Regards,
Mohan.
Edited by: Julius Bussche on Jul 19, 2008 8:43 PM

Hi,
Follow these steps:
1. Add ur 5 fields in the structure (in DDIC level)
2. Instead of passing the structure name directly to the FM REUSE_ALV_GRID_DISPLAY pass it to FM REUSE_ALV_FIELDCATALOG_MERGE
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
            I_STRUCTURE_NAME     = < ur structure name>
       CHANGING
            ct_fieldcat        = fieldcat[].
3. As in ur case if the check box is checked only then u need to display ur 5 fields..so to do that u need to modify the filed v=catalog table returned by the above FM like:
if check_box = 'X'.
loop at fieldcat into w_cat.
if w_cat-fieldname = 'MYFLD1' or
   w_cat-fieldname = 'MYFLD2' or
   w_cat-fieldname = 'MYFLD3' or
   w_cat-fieldname = 'MYFLD4' or
   w_cat-fieldname = 'MYFLD5'.
w_cat-no_out = 'X'.
modify fieldcat from w_cat transporting no_out index sy-tabix.
ENDIF.
endloop.
endif.
4. pass this field catalog table to Fm REUSE_ALV_GRID_DISPLAY instead of the structure name.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
I_STRUCTURE_NAME     = << Comment out this parameter
         I_CALLBACK_PROGRAM                = g_REPID
         iS_LAYOUT   = is_layout
         it_SORT     = It_SORT
         it_fieldcat = fieldcat[]
         I_SAVE                            = 'A' "
         IS_VARIANT                        = VARIANT
       I_CALLBACK_TOP_OF_PAGE            = 'TOP_OF_PAGE'
       I_GRID_TITLE                      = 'Special ALV'
       TABLES
            t_outtab    = t_daten.
Hope it will solve ur problem
Regards,
JOy.

Logo & TOP_OF_PAGE in OO ALV

Similar Messages

Maybe you are looking for