Long header in ALV list
Hi,
how to add a long header line ( more than 60 characters ) to an ALV list, please ?
I tried with filling a table with structure SLIS_T_LISTHEADER, but this only allows lines up to 60 characters...
thanks,
Rolf
Unless you can break it into 2 lines, you're pretty much stuck with the 60 char line.
I seem to remember we tried doing this using the HTML option for the header, but we found that it was inconsistent and
not to our liking. We reverted to 2 lines.
Similar Messages
-
Displaying a header on alv list
hi there,
i want to display a header on alv list.
i have already used
call method alvgrid->set_table_for_first_display
regradsHi,
use the TOP_OF_PAGE event and add the event to the IT_EVENTS internal table..
In the subroutine that is assigned to the event..
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = heading.
ENDFORM.
Thanks,
Naren -
Couldn't print header of ALV list
Hi All,
I couldn't print header for the alv list. Code is below.
REPORT ztest123456 .
TYPE-POOLS: slis.
DATA: wa_fieldcat TYPE slis_fieldcat_alv,
g_t_tfieldcat TYPE slis_t_fieldcat_alv,
itab1 TYPE STANDARD TABLE OF cdhdr,
g_t_event TYPE slis_t_event,
wa_event TYPE slis_alv_event,
g_pos TYPE i VALUE 1,
head TYPE slis_t_listheader,
wa_head TYPE slis_listheader.
START-OF-SELECTION.
SELECT * FROM cdhdr INTO TABLE itab1
WHERE objectclas = 'COND_A'
AND tcode = 'VK12'.
SORT itab1 BY objectclas.
wa_head-typ = 'H'.
wa_head-info = 'Records in cdhdr table'.
APPEND wa_head TO head.
PERFORM sub_fldctlg USING: 'OBJECTCLAS' 'ITAB1' 13 'Object class'.
FORM sub_fldctlg *
FORM sub_fldctlg USING u_fname TYPE slis_fieldcat_alv-fieldname
u_tname TYPE slis_fieldcat_alv-tabname
u_outlen TYPE slis_fieldcat_alv-outputlen
u_seltext TYPE slis_fieldcat_alv-seltext_l.
CLEAR wa_fieldcat.
wa_fieldcat-col_pos = g_pos. "Column Position
wa_fieldcat-fieldname = u_fname. "Field Name
wa_fieldcat-tabname = u_tname. "Table Name
wa_fieldcat-outputlen = u_outlen. "Output column Length
wa_fieldcat-seltext_l = u_seltext. "Column Header
g_pos = g_pos + 1. "Incrementing column position
APPEND wa_fieldcat TO g_t_tfieldcat. "Appending field Catalog
ENDFORM.
*& Form sub_top
FORM sub_top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = head.
ENDFORM. " sub_top
END-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
IMPORTING
et_events = g_t_event.
READ TABLE g_t_event INTO wa_event WITH KEY name = 'TOP_OF_PAGE'.
IF sy-subrc EQ 0.
wa_event-form = 'SUB_TOP'.
MODIFY g_t_event FROM wa_event INDEX sy-tabix.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = g_t_tfieldcat
it_events = g_t_event
TABLES
t_outtab = itab1.
Thanks in advance.Hi,
The issue is resolved. I just pass the program name (SY-REPID) through a variable to the function module that displays list/grid. I came to know that these system variable behavior is UN-predictable in SAP and hence passed program name through a global variable instead of using a system variable value.
Thanks.. -
How to Change Column header in ALV List
hello,
is there a way to change the column header/label of an ALV list other than inheriting it from the source table it is bound to?
thanks,
sidYes, you can. If you are using a field catalog, you can change the field labels in your program.
For example.
data: fc_tmp type slis_fieldcat_alv .
clear: fieldcat. refresh: fieldcat.
clear: fc_tmp.
<b> fc_tmp-reptext_ddic = 'Material Number'.</b>
fc_tmp-fieldname = 'MATNR'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '18'.
fc_tmp-col_pos = 2.
append fc_tmp to fieldcat.
If you are using the MERGE funciton module to get your field catalog, then you just need to loop thru it and change the field which is holding the description, then modify the line of the field catalog.
REgards,
Rich Heilman -
How To Create Header in ALV List Report
Hi All,
I want to create a Header for <b>MY ALV List Report</b>!
How can i achieve the same. It should come above <b>ALV</b>.
ALV report i had already written and it is coming correctly.
Heading should look like this:
<i>1st Line</i>
<b>PROGRAM NAME: XXXXXX CLIENT: XXXXXXXXXX PAGE:XX</b>
<i>2nd Line</i>
<b>RUN DATE/TIME: XXXXX - XXXX REPORT NAME/HEADER</b>
How can i acheive the same in <b>ALV List Report</b>!
I am amking use of <b>REUSE_ALV_LIST_DISPLAY</b> Function module.
Thanks in advance.
Thanks & Regards,
Prasad.Hi Prasad,
Use the sample code specified below as the guideline. For more info. refer to the documentation of the FM 'REUSE_ALV_COMMENTARY_WRITE'.
DATA: first(01) type c,
events type slis_t_event,
gt_list_top_of_page type slis_t_listheader,
ls_event type slis_alv_event.
initialization.
call function 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = events
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
read table events with key name = 'TOP_OF_PAGE'
into ls_event.
if sy-subrc = 0.
move: 'TOP_OF_PAGE' to ls_event-form.
append ls_event to events.
clear ls_event.
endif.
End of additions
Start-of-selection
START-OF-SELECTION.
Top-of-page
TOP-OF-PAGE.
PERFORM TOP_OF_PAGE.
FORM TOP_OF_PAGE .
data: ls_line type slis_listheader.
if first is initial.
ls_line-typ = 'S'.
ls_line-key = 'Run Date :'.
write: sy-datum to ls_line-key+10 mm/dd/yyyy.
ls_line-info = 'Billing Date:'.
write: s_fkdat-low to ls_line-info+15 mm/dd/yyyy.
ls_line-info+28 = 'To'.
write s_fkdat-high to ls_line-info+32 mm/dd/yyyy.
append ls_line to gt_list_top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = gt_list_top_of_page.
first = 'N'.
else.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = gt_list_top_of_page.
endif.
ENDFORM. " top_of_page
<b>Please mark helpful answer.</b>
Regards,
Amit Mishra -
Hello friends,
I want to display icon in ALV header list.
Caould you please tell me how can i achieve this.
Currently instead of icon it is showing as '@5B@'.
CREATE OBJECT document.
CALL METHOD document->add_icon
EXPORTING
sap_icon = 'ICON_LED_GREEN'.
ls_header-typ = 'S'.
write ICON_LED_GREEN AS ICON TO text_001.
CONCATENATE 'Aufnr:'
p_aufnr
text_001
INTO ls_header-info.
APPEND ls_header TO lt_header.
CLEAR: ls_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = lt_header
I_LOGO =
I_END_OF_LIST_GRID =
I_ALV_FORM =Hi,
Check this
w_events-name = 'TOP_OF_PAGE'.
w_events-form = 'TOP_OF_PAGE'.
APPEND w_events TO i_events.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = i_fieldcat
it_events = i_events
TABLES
t_outtab = it_data.
FORM top_of_page.
WRITE:/ '@08@'," Green light; positive
'@09@'," Yellow light; neutral
'@0A@'." Red light; negative
ENDFORM. "top_of_page -
hi abapers,
i got a requirement to disply material no.'s in descending order in lav grid/list both..
now, when i did sorting of the column, grid is displaying the output fine but in list HEADER IS GETTING PRINTED MULTIPLE TIMES, one for each new matnr [although it gets descendigly sorted],
below is my code of sorting, could you please expalin why is this happening,. ?? is this compatibiltiy issue ??
*& Form ZF_SORTING
text
-->P_I_SORTINFO text
FORM zf_sorting USING p_i_sortinfo TYPE slis_t_sortinfo_alv.
DATA l_sortinfo TYPE slis_sortinfo_alv.
REFRESH p_i_sortinfo.
CLEAR l_sortinfo.
*&-- passing attributes to sort the column
L_SORTINFO-SPOS = '1'. " 1 sorting position
l_sortinfo-fieldname = 'MATNR'. "fieldname
l_sortinfo-tabname = 'I_FINAL'. "final table
l_sortinfo-down = 'X'. "enable
l_sortinfo-group = ' * '. "DONT REPEAT COMMON ITEM
APPEND l_sortinfo TO p_i_sortinfo.
ENDFORM. " ZF_SORTING
*& Form zf_display_alv_list
text
--> p1 text
<-- p2 text
FORM zf_display_alv_list .
*&--calling FM to display LIST LAYOUT
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = v_progname
I_CALLBACK_PF_STATUS_SET = 'ZF_PF_STATUS_SET'
is_layout = wa_layout
it_fieldcat = i_fieldcat
I_DEFAULT = 'X'
it_events = i_eventcat
it_sort = i_sortinfo
I_SAVE = C_SAVE "all user/default
IS_VARIANT = IT_VARIANT1
TABLES
t_outtab = i_final
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " zf_display_alv_list
Please help,Hi,
Did you find a solution for this?, I am also having a similar requirement.
If you have any work around please share.
Thanks. -
Display Logo in ALV LIST header
Hi Experts!!
I need the logo to be displayed in the header of ALV LIST but not the grid display. I searched for this, and got the results for ALV grid display. Kindly let me know if there's any way of printing the logo in the ALV List display. I hope that's possible with oops.
Please help me out.
Thanks and Regards,
Seenuhello srinivas,
Check the Examples in LIBS trxn,
see the example One-Line List with Top of Page
regards,
Shweta -
Header in every page of ALV List
Hi All,
I am working in ALV list now the requirement is that i have to fetch the data based on inputs given when the report executed. and the values which i gave in the input is printed as header of ALV list.
I have done everything except that when i am printing the Header it is coming only on the first page but we want it in every page the list spreads. please help me ASAP.
Regards,
hrkHi,
As my knowledge, It can not do the thing you told (you can do this thing with Smartforms). but you can separate your report with a condition to break page. Here an example that you can break page with condition when company code changes or GL account changes.
firstly, build a sort table:
FORM sort_build CHANGING pt_sort TYPE slis_t_sortinfo_alv.
*-- company code
gs_sort-spos = 1.
gs_sort-fieldname = 'BUKRS'.
gs_sort-tabname = 'GT_FKONT'.
gs_sort-up = 'X'.
gs_sort-group = '*'.
gs_sort-subtot = 'X'.
APPEND gs_sort TO gt_sort.
*-- Account
gs_sort-spos = 2.
gs_sort-fieldname = 'SAKNR'.
gs_sort-tabname = 'GT_FKONT'.
gs_sort-up = 'X'.
gs_sort-group = '*'.
gs_sort-subtot = 'X'.
APPEND gs_sort TO gt_sort.
ENDFORM.
and attach the sorted table to FM:
FORM alv_list_display TABLES pt_itab
USING pv_pf_status_set
pv_user_command.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = gv_repid
i_callback_user_command = pv_user_command
i_callback_pf_status_set = pv_pf_status_set
is_layout = gs_layout
i_save = gv_save
it_excluding = gt_excluding[]
is_variant = gs_variant
it_events = gt_events[]
it_event_exit = gt_event_exit[]
it_fieldcat = gt_fieldcat[]
*it_sort = gt_sort[]* "sort table
IMPORTING
e_exit_caused_by_caller = gv_exit_caused_by_caller
es_exit_caused_by_user = gt_exit_caused_by_user
TABLES
t_outtab = pt_itab.
ENDFORM.
regards,
Thien
Edited by: Thien Pham on Dec 1, 2009 2:48 -
Can't remove Mail's long header information
My Mail always shows a long header information as listed below. Is there a simple way of removing everything in the header except To:, From:, Date:, and Subject: ?
From: [email protected]
Subject: test email
Date: 3 April 2006 10:10:36 PM
To: [email protected]
Return-Path: <[email protected]>
Received: by cpms02.int.iprimus.net.au (7.2.072.1) id 4429596C00AAC553 for [email protected]; Tue, 4 Apr 2006 00:10:46 +1000
Received: from smtpout.mac.com (17.250.248.89) by mx02.iprimus.com.au (7.2.072.1) id 4420431D015397C0 for [email protected]; Tue, 4 Apr 2006 00:10:46 +1000
Received: from mac.com (smtpin08-en2 [10.13.10.153]) by smtpout.mac.com (Xserve/8.12.11/smtpout02/MantshX 4.0) with ESMTP id k33EAjDx019385 for <[email protected]>; Mon, 3 Apr 2006 07:10:45 -0700 (PDT)
Received: from [203.166.239.208] (203-166-239-208.dyn.iinet.net.au [203.166.239.208]) (authenticated bits=0) by mac.com (Xserve/smtpin08/MantshX 4.0) with ESMTP id k33EAciu000802 for <[email protected]>; Mon, 3 Apr 2006 07:10:44 -0700 (PDT)
Mime-Version: 1.0 (Apple Message framework v746.3)
Content-Transfer-Encoding: 7bit
Message-Id: <[email protected]>
Content-Type: text/plain; charset=US-ASCII; format=flowed
X-Mailer: Apple Mail (2.746.3)
End of Header.
iMac G5 Mac OS X (10.4.5)In Mail from View menu >> Message >> short header.
-mj
[email protected] -
Changing the status of heading in ALV
HI Gurus,
I am creating a ALV report program. When I execute the statements (with select options and parameters only)
I get the output selection screen. But the header comes as the report program name like ZRR_ALV_LIST..
But I need to change this to some other text of my choice.
Please help me on this.
Thanks & Regards,
Gopinath GS.
Edited by: Gopigs on May 20, 2011 8:35 AM
Moderator Message: Basic Question.
Edited by: kishan P on May 20, 2011 12:31 PMThis is the simple code that I have done.
REPORT zrr_alv_list NO STANDARD PAGE HEADING.
TABLES:anla.
TYPE-POOLS: slis.
SELECTION-SCREEN BEGIN OF BLOCK b100 WITH FRAME TITLE text-bl0.
SELECT-OPTIONS: s_bukrs FOR anla-bukrs,
s_anln1 FOR anla-anln1,
s_anln2 for anla-anln2.
PARAMETERS: p_date LIKE anla-erdat.
SELECTION-SCREEN END OF BLOCK b100.
When I execute I get the selection screen. But the header of the selection screen gives the report program name 'zrr_alv_list'.
Instead i need to put up the header as 'ALV LIST DISPLAY'.
Also one more query I got just now.
How can I get the current fiscal year end date and default it to the Parameters field p_date??
Gs.
Edited by: Gopigs on May 20, 2011 9:00 AM -
Traffic lights in ALV list header
how do i display traffic lights as icons in ALV list header. for example, in the code below, i want to display a green icon at the end of closed items and a red icon at the end of the open items:
closed : 4 [green-icon]
open : 2 [red-icon]
CLEAR header_alv_wa-info.
header_alv_wa-key = 'closed:'.
header_alv_wa-info = gv_closed.
header_alv_wa-typ = 'S'.
APPEND header_alv_wa TO headeralv.
CLEAR header_alv_wa-info.
header_alv_wa-typ = 'S'.
header_alv_wa-key = 'open:'.
header_alv_wa-info = gv_open.
APPEND header_alv_wa TO headeralv.Hi,
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
the above links will give u the code for the same..
Regards,
Aparna -
How to include a Header in Hierarchy List (ALV)?
Hi Gurus,
If we need to include any header in ALV Grid, then we generate an event and pass that header to TOP_OF_PAGE event. We do have I_CALLBACK_TOP_OF_PAGE parameter for the REUSE_ALV_GRID_DISPLAY function module.
But how do I generate a Header for a Hierarchy List? I do not find any parameter for TOP_OF_PAGE event. Please help with inputs.
Regards,
KiranHi Kiran,
The following codes are very useful to you...
If any problem let me know...
REPORT zxxxxxxxxxxxxxx LINE-SIZE 220
LINE-COUNT 50(5).
*& DATA DECLARATION *
TABLES: MARA, "GENERAL MASTER DATA
MARC, "PLANT DATA FOR MATERIAL
MARD, "STORAGE LOCATION DATA FOR MATERIAL
MBEW, "MATERIAL VALUATION
MVKE, "SALES DATA FOR MATERIAL
MAKT, "MATERIAL DESCRIPTION
EKKO, "PURCHASING DOCUMENT HEADER
EKPO, "PURCHASING DOCUMENT ITEM
VBAK, "SALES DOCUMENT HEADER DATA
VBAP. "SALES DOCUMENT ITEM DATA
TYPE-POOLS : SLIS.
DATA: VT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV,
V_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
V_LAYOUT TYPE SLIS_LAYOUT_ALV,
BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
BEGIN OF I_MARA OCCURS 0,
MATNR LIKE MARA-MATNR, "MATERIAL NUMBER
MBRSH LIKE MARA-MBRSH, "INDUSTRY SECTOR
MEINS LIKE MARA-MEINS, "BASE UNIT OF MEASURE
MATKL LIKE MARA-MATKL, "MATERIAL GROUP
END OF I_MARA,
BEGIN OF I_MARC OCCURS 0,
MATNR LIKE MARC-MATNR, "MATERIAL NUMBER
WERKS LIKE MARC-WERKS, "PLANT
LVORM LIKE MARC-LVORM, "FLAG MATERIAL FOR DELETION AT PLANT
"LEVEL
DISPO LIKE MARC-DISPO, "MRP CONTROLLER
END OF I_MARC,
BEGIN OF I_MAKT OCCURS 0,
MATNR LIKE MAKT-MATNR, "MATERIAL NUMBER
MAKTX LIKE MAKT-MAKTX, "MATERIAL DESCRIPTION
SPRAS LIKE MAKT-SPRAS, "LANGUAGE KEY
END OF I_MAKT,
BEGIN OF I_MVKE OCCURS 0,
MATNR LIKE MVKE-MATNR, "MATERIAL NUMBER
VKORG LIKE MVKE-VKORG, "SALES ORGANIZATION
VTWEG LIKE MVKE-VTWEG, "DISTRIBUTION CHANNEL
END OF I_MVKE,
BEGIN OF I_MARD OCCURS 0,
MATNR LIKE MARD-MATNR, "MATERIAL NUMBER
LGORT LIKE MARD-LGORT, "STORAGE LOCATION
LABST LIKE MARD-LABST, "VALUATED STOCK WITH UNRESTRICTED USE
END OF I_MARD,
BEGIN OF I_EKPO OCCURS 0,
EBELN LIKE EKPO-EBELN, "PURCHASING DOCUMENT NUMBER
EBELP LIKE EKPO-EBELP, "ITEM NUMBER OF PURCHASING DOCUMENT
MATNR LIKE EKPO-MATNR, "MATERIAL NUMBER
END OF I_EKPO,
BEGIN OF I_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF I_VBAP,
BEGIN OF I_OUT OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS,
LVORM LIKE MARC-LVORM,
DISPO LIKE MARC-DISPO,
MBRSH LIKE MARA-MBRSH,
MEINS LIKE MARA-MEINS,
MATKL LIKE MARA-MATKL,
VKORG LIKE MVKE-VKORG,
VTWEG LIKE MVKE-VTWEG,
SPRAS LIKE MAKT-SPRAS,
MAKTX LIKE MAKT-MAKTX,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
VBELN LIKE VBAP-VBELN,
POSNR LIKE VBAP-POSNR,
END OF I_OUT,
BEGIN OF I_HEADING OCCURS 0,
TEXT1(20),
TEXT2(20),
TEXT3(20),
TEXT4(20),
TEXT5(20),
TEXT6(20),
TEXT7(20),
TEXT8(20),
TEXT9(20),
TEXT10(20),
TEXT11(40),
TEXT12(20),
TEXT13(20),
TEXT14(20),
TEXT15(20),
TEXT16(20),
TEXT17(20),
END OF I_HEADING.
*& S E L E C T I O N - S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-100.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR. "OBLIGATORY.
PARAMETERS: P_WERKS LIKE MARC-WERKS. "OBLIGATORY.
SELECT-OPTIONS: S_LGORT FOR MARD-LGORT,
S_DISPO FOR MARC-DISPO,
S_EBELN FOR EKPO-EBELN .
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-101.
PARAMETERS : RB1 RADIOBUTTON GROUP G1,
RB2 RADIOBUTTON GROUP G1,
RB3 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
*& S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
SELECT MATNR WERKS LVORM DISPO FROM MARC
INTO CORRESPONDING FIELDS OF TABLE I_MARC
WHERE MATNR IN S_MATNR
AND DISPO IN S_DISPO
AND WERKS = P_WERKS.
IF I_MARC[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARC'.
EXIT.
ENDIF.
PERFORM PURCHASEDATA_VALIDATION.
PERFORM SALESDATA_VALIDATION.
SELECT MATNR LGORT LABST FROM MARD INTO TABLE I_MARD
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR
AND WERKS EQ P_WERKS
AND LGORT IN S_LGORT.
IF I_MARD[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARD'.
EXIT.
ENDIF.
SELECT MATNR VKORG VTWEG FROM MVKE INTO TABLE I_MVKE
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR.
IF I_MVKE[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MVKE'.
EXIT.
ENDIF.
LOOP AT I_MARC.
MOVE-CORRESPONDING I_MARC TO I_OUT.
CLEAR MARC.
SELECT SINGLE MATNR MBRSH MEINS MATKL FROM MARA
INTO CORRESPONDING FIELDS OF MARA
WHERE MATNR = I_OUT-MATNR.
IF SY-SUBRC = 0.
MOVE: MARA-MBRSH TO I_OUT-MBRSH,
MARA-MEINS TO I_OUT-MEINS,
MARA-MATKL TO I_OUT-MATKL.
ELSE.
CONTINUE.
ENDIF.
SELECT SINGLE MATNR MAKTX SPRAS FROM MAKT
INTO CORRESPONDING FIELDS OF MAKT
WHERE MATNR = I_OUT-MATNR.
IF SY-SUBRC = 0.
MOVE: MAKT-MAKTX TO I_OUT-MAKTX,
MAKT-SPRAS TO I_OUT-SPRAS.
ELSE.
CONTINUE.
ENDIF.
LOOP AT I_EKPO WHERE MATNR = I_MARC-MATNR.
MOVE: I_EKPO-EBELN TO I_OUT-EBELN,
I_EKPO-EBELP TO I_OUT-EBELP.
ENDLOOP.
LOOP AT I_VBAP WHERE MATNR = I_MARC-MATNR.
MOVE: I_VBAP-VBELN TO I_OUT-VBELN,
I_VBAP-POSNR TO I_OUT-POSNR.
ENDLOOP.
LOOP AT I_MARD WHERE MATNR = I_MARC-MATNR.
MOVE: I_MARD-LABST TO I_OUT-LABST,
I_MARD-LGORT TO I_OUT-LGORT.
ENDLOOP.
LOOP AT I_MVKE WHERE MATNR = I_MARC-MATNR.
MOVE: I_MVKE-VKORG TO I_OUT-VKORG,
I_MVKE-VTWEG TO I_OUT-VTWEG.
APPEND I_OUT.
ENDLOOP.
CLEAR I_OUT.
ENDLOOP.
PERFORM OPTIONS.
FORM OPTIONS *
FORM OPTIONS.
IF RB2 = 'X'.
PERFORM FIELDCAT.
PERFORM OUTPUT.
ELSE.
IF RB1 = 'X'.
PERFORM HEADINGS.
PERFORM DLOAD.
ELSE.
IF RB3 = 'X'.
PERFORM HEADINGS.
PERFORM DLOAD.
PERFORM FIELDCAT.
PERFORM OUTPUT.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. "OPTIONS
FORM HEADINGS *
FORM HEADINGS.
I_HEADING-TEXT1 = 'MATNR'.
I_HEADING-TEXT2 = 'WERKS'.
I_HEADING-TEXT3 = 'LVORM'.
I_HEADING-TEXT4 = 'DISPO'.
I_HEADING-TEXT5 = 'MBRSH'.
I_HEADING-TEXT6 = 'MEINS'.
I_HEADING-TEXT7 = 'MATKL'.
I_HEADING-TEXT8 = 'VKORG'.
I_HEADING-TEXT9 = 'VTWEG'.
I_HEADING-TEXT10 = 'SPRAS'.
I_HEADING-TEXT11 = 'MAKTX'.
I_HEADING-TEXT12 = 'LGORT'.
I_HEADING-TEXT13 = 'LABST'.
I_HEADING-TEXT14 = 'EBELN'.
I_HEADING-TEXT15 = 'EBELP'.
I_HEADING-TEXT16 = 'VBELN'.
I_HEADING-TEXT17 = 'POSNR'.
APPEND I_HEADING.
ENDFORM. "HEADINGS
FORM DLOAD *
FORM DLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\MATSTK.XLS'
FILETYPE = 'DAT'
WRITE_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = I_HEADING
EXCEPTIONS
FILE_WRITE_ERROR = 1.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\MATSTK.XLS'
FILETYPE = 'DAT'
APPEND = 'X'
WRITE_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = I_OUT.
ENDFORM. "DLOAD
FORM FIELDCAT *
FORM FIELDCAT.
V_FIELDCAT-COL_POS = '1'.
V_FIELDCAT-FIELDNAME = 'MATNR'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-HOTSPOT = 'X'.
V_FIELDCAT-REF_FIELDNAME = 'MATNR'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '2'.
V_FIELDCAT-FIELDNAME = 'WERKS'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'WERKS'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '3'.
V_FIELDCAT-FIELDNAME = 'LVORM'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'LVORM'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '4'.
V_FIELDCAT-FIELDNAME = 'DISPO'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'DISPO'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '5'.
V_FIELDCAT-FIELDNAME = 'MBRSH'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MBRSH'.
V_FIELDCAT-REF_TABNAME = 'MARA'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '6'.
V_FIELDCAT-FIELDNAME = 'MEINS'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MEINS'.
V_FIELDCAT-REF_TABNAME = 'MARA'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '7'.
V_FIELDCAT-FIELDNAME = 'MATKL'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MATKL'.
V_FIELDCAT-REF_TABNAME = 'MARA'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '8'.
V_FIELDCAT-FIELDNAME = 'VKORG'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'VKORG'.
V_FIELDCAT-REF_TABNAME = 'MVKE'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '9'.
V_FIELDCAT-FIELDNAME = 'VTWEG'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'VTWEG'.
V_FIELDCAT-REF_TABNAME = 'MVKE'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '10'.
V_FIELDCAT-FIELDNAME = 'SPRAS'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'SPRAS'.
V_FIELDCAT-REF_TABNAME = 'MAKT'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '11'.
V_FIELDCAT-FIELDNAME = 'MAKTX'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MAKTX'.
V_FIELDCAT-REF_TABNAME = 'MAKT'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '12'.
V_FIELDCAT-FIELDNAME = 'LGORT'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'LGORT'.
V_FIELDCAT-REF_TABNAME = 'MARD'.
V_FIELDCAT-SELTEXT_L = 'STRG LOCT'.
V_FIELDCAT-OUTPUTLEN = 10.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '13'.
V_FIELDCAT-FIELDNAME = 'LABST'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-SELTEXT_M = 'STOCK'.
V_FIELDCAT-OUTPUTLEN = 15.
V_FIELDCAT-REF_FIELDNAME = 'LABST'.
V_FIELDCAT-REF_TABNAME = 'MARD'.
V_FIELDCAT-DO_SUM = 'X'.
V_LAYOUT-TOTALS_TEXT = 'TOTAL STOCK:'.
V_FIELDCAT-HOTSPOT = 'X'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '14'.
V_FIELDCAT-FIELDNAME = 'EBELN'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-HOTSPOT = 'X'.
V_FIELDCAT-REF_FIELDNAME = 'EBELN'.
V_FIELDCAT-REF_TABNAME = 'EKPO'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '15'.
V_FIELDCAT-FIELDNAME = 'EBELP'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'EBELP'.
V_FIELDCAT-REF_TABNAME = 'EKPO'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '16'.
V_FIELDCAT-FIELDNAME = 'VBELN'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-HOTSPOT = 'X'.
V_FIELDCAT-REF_FIELDNAME = 'VBELN'.
V_FIELDCAT-REF_TABNAME = 'VBAP'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '17'.
V_FIELDCAT-FIELDNAME = 'POSNR'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'POSNR'.
V_FIELDCAT-REF_TABNAME = 'VBAP'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
ENDFORM. "FIELDCAT
FORM OUTPUT *
FORM OUTPUT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
I_GRID_TITLE = 'CLICK ON MATERIAL/PURDOC/SALESDOC FOR DETAILS'
I_CALLBACK_USER_COMMAND = 'DISPLAYDETAILS'
IS_LAYOUT = V_LAYOUT
IT_FIELDCAT = VT_FIELDCAT1
TABLES
T_OUTTAB = I_OUT.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM. "OUTPUT
FORM TOP-OF-PAGE *
FORM TOP-OF-PAGE.
DATA: T_HEADER TYPE SLIS_T_LISTHEADER,
WA_HEADER TYPE SLIS_LISTHEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = 'REPORT FOR : '.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = 'MATERIAL DETAILS'.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = 'PURCHASE ORDER DETAILS'.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = 'SALES ORDER DETAILS'.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
I_LOGO = 'GEAR'
IT_LIST_COMMENTARY = T_HEADER.
ENDFORM. "TOP-OF-PAGE
*& FORM DISPLAYDETAILS *
FORM DISPLAYDETAILS USING UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
IF SELFIELD-FIELDNAME = 'EBELN'.
IF UCOMM = '&IC1'.
READ TABLE I_OUT INDEX SELFIELD-TABINDEX.
PERFORM PORECDNG.
CLEAR BDCDATA[].
ENDIF.
ELSE.
IF SELFIELD-FIELDNAME = 'MATNR'.
IF UCOMM = '&IC1'.
READ TABLE I_OUT INDEX SELFIELD-TABINDEX.
PERFORM MMRECDNG.
CLEAR BDCDATA[].
ENDIF.
ELSE.
IF SELFIELD-FIELDNAME = 'VBELN'.
IF UCOMM = '&IC1'.
READ TABLE I_OUT INDEX SELFIELD-TABINDEX.
PERFORM SALESRECDNG.
CLEAR BDCDATA[].
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. "DISPLAYDETAILS
FORM PORECDNG *
FORM PORECDNG.
perform bdc_dynpro using 'SAPMM06E' '0105'.
perform bdc_field using 'BDC_CURSOR'
'RM06E-BSTNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RM06E-BSTNR'
I_OUT-EBELN.
perform bdc_dynpro using 'SAPMM06E' '0120'.
perform bdc_field using 'BDC_CURSOR'
'RM06E-BSTPO(01)'.
perform bdc_field using 'BDC_OKCODE'
'=AH'.
perform bdc_field using 'RM06E-EBELP'
I_OUT-EBELP.
perform bdc_field using 'RM06E-TCSELFLAG(01)'
'X'.
perform bdc_transaction using 'ME23'.
ENDFORM. "PORECDNG
FORM MMRECDNG *
FORM MMRECDNG.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '0060'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RMMG1-MATNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RMMG1-MATNR'
I_OUT-MATNR.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '0070'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_FIELD USING 'MSICHTAUSW-KZSEL(01)'
'X'.
PERFORM BDC_TRANSACTION USING 'MM03'.
ENDFORM. "MMRECDNG
FORM SALESRECDNG *
FORM SALESRECDNG.
PERFORM BDC_DYNPRO USING 'SAPMV45A' '0102'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'VBAK-VBELN'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'VBAK-VBELN'
I_OUT-VBELN.
PERFORM BDC_TRANSACTION USING 'VA03'.
ENDFORM. "SALESRECDNG
FORM BDC_TRANSACTION *
FORM BDC_TRANSACTION USING TCODE.
CALL TRANSACTION TCODE USING BDCDATA MODE 'E'.
ENDFORM. "BDC_TRANSACTION
FORM BDC_DYNPRO *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. "BDC_DYNPRO
INSERT FIELD *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDFORM. "BDC_FIELD
*& FORM PURCHASEDATA_VALIDATION *
FORM PURCHASEDATA_VALIDATION.
SELECT EBELN EBELP MATNR
FROM EKPO
INTO TABLE I_EKPO
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR
AND EBELN IN S_EBELN
AND WERKS EQ P_WERKS.
IF I_EKPO[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA IS SELECTED FROM TABLE EKPO'.
EXIT.
ENDIF.
DATA: T_EKPO LIKE I_EKPO OCCURS 0 WITH HEADER LINE.
T_EKPO[] = I_EKPO[].
REFRESH I_EKPO.
FREE I_EKPO.
LOOP AT T_EKPO.
SELECT SINGLE EBELN FROM EKKO INTO EKPO-EBELN
WHERE EBELN = T_EKPO-EBELN.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING T_EKPO TO I_EKPO.
APPEND I_EKPO.
CLEAR I_EKPO.
ELSE.
CONTINUE.
ENDIF.
ENDLOOP.
SORT I_EKPO.
ENDFORM. "PURCHASEDATA_VALIDATION
*& FORM SALESDATA_VALIDATION *
FORM SALESDATA_VALIDATION.
SELECT VBELN POSNR MATNR
FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE
I_VBAP FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR.
DATA: T_VBAP LIKE I_VBAP OCCURS 0 WITH HEADER LINE.
T_VBAP[] = I_VBAP[].
REFRESH I_VBAP.
FREE I_VBAP.
LOOP AT T_VBAP.
SELECT SINGLE VBELN FROM VBAK INTO VBAK-VBELN
WHERE VBELN = T_VBAP-VBELN.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING T_VBAP TO I_VBAP.
APPEND I_VBAP.
CLEAR I_VBAP.
ELSE.
CONTINUE.
ENDIF.
ENDLOOP.
SORT I_VBAP.
ENDFORM. "SALESDATA_VALIDATION
..........................FOr Hierarchy List...................
REPORT Zxxxxxxxxxx NO STANDARD PAGE HEADING.
**********DECLARING TABLES********************************************
TYPE-POOLS: slis.
TABLES: EKKO, "PO HEADER
EKPO. "PO ITEM
**********DECLARING DATA**********************************************
DATA: ET_EKKO TYPE EKKO OCCURS 0 WITH HEADER LINE,
ET_EKPO TYPE EKPO OCCURS 0 WITH HEADER LINE,
ET_SORT TYPE SLIS_T_SORTINFO_ALV WITH HEADER LINE,
ET_LAYOUT TYPE SLIS_LAYOUT_ALV,
ET_KEYINFO TYPE SLIS_KEYINFO_ALV,
ET_REPID LIKE SY-REPID.
DATA: ET_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
DATA: ET_EVENTS TYPE SLIS_T_EVENT.
**********SELECTION CRITERIA****************************************
SELECTION-SCREEN BEGIN OF BLOCK RAD1 WITH FRAME TITLE TEXT-003.
SELECT-OPTIONS: S_EBELN FOR ET_EKPO-EBELN OBLIGATORY.
SELECTION-SCREEN END OF BLOCK RAD1.
INITIALIZATION.
ET_KEYINFO-HEADER01 = 'EBELN'.
ET_KEYINFO-ITEM01 = 'EBELN'.
ET_SORT-FIELDNAME = 'EBELN'.
ET_SORT-TABNAME = '2'.
ET_SORT-SPOS = 1.
ET_SORT-UP = 'X'.
ET_SORT-SUBTOT = 'X'.
APPEND ET_SORT.
ET_SORT-FIELDNAME = 'EBELP'.
ET_SORT-TABNAME = '2'.
ET_SORT-SPOS = 1.
APPEND ET_SORT.
ET_FIELDCAT-FIELDNAME = 'NETWR'.
ET_FIELDCAT-TABNAME = '2'.
ET_FIELDCAT-OUTPUTLEN = 8.
ET_FIELDCAT-DO_SUM = 'X'.
ET_FIELDCAT-HOTSPOT = 'X'.
APPEND ET_FIELDCAT.
START-OF-SELECTION.
SELECT EBELN BUKRS AEDAT ERNAM FROM EKKO INTO CORRESPONDING
FIELDS OF TABLE ET_EKKO
WHERE EBELN IN S_EBELN.
SELECT * FROM EKPO INTO CORRESPONDING FIELDS
OF TABLE ET_EKPO FOR ALL ENTRIES IN
ET_EKKO WHERE EBELN = ET_EKKO-EBELN.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
I_STRUCTURE_NAME_HEADER = 'EKKO'
I_STRUCTURE_NAME_ITEM = 'EKPO'
IS_KEYINFO = ET_KEYINFO " The structure contains the
" header and item table
" field names which links the
" the two tables(shared key)
IS_LAYOUT = ET_LAYOUT
IT_FIELDCAT = ET_FIELDCAT[]
I_TABNAME_HEADER = '1' " Name of the internal table in the
" program containing the output data
" of the highest hierarchy level
I_TABNAME_ITEM = '2' " Name of the internal table in the
" program containing the output data
" of the highest hierarchy level
IT_EVENTS = ET_EVENTS[]
IT_SORT = ET_SORT[]
TABLES
T_OUTTAB_HEADER = ET_EKKO " Header table with data to be
" output
T_OUTTAB_ITEM = ET_EKPO. " Name of the internal table in
" the program containing the
" output data of the lowest
"hierarchy level.
Regards,,
Satya Kumar.. -
Company Logo in ALV List Header
Hi,
I have created an ALV list and would like to put our company logo in the header. How can I do this?
Thanks,
Shah.Hi,
In the transaction OAOR, you should be able to insert your company Logo.
GOTO - OAOR (Business Document Navigator)
Give Class Name - PICTURES Class Type - OT..... then Execute
It will show you the list, then select ENJOYSAP_LOGO.
On that list, you will find one control with a "create" tab.
Click std. doc types.
Select SCREEN and double-click.
It will push FILE selection screen.
Select your company logo (.gif) and press OK.
It will ask for a description- for instance: "company logo".
It will let you know your doc has been stored successfully.
You can find your logo under ENJOYSAP_LOGO->Screen->company logo.
Just run your ALV program, you should find your company logo in place of the EnjoySAP logo.
Reward points if found helpfull..
Cheers,
Chandra Sekhar. -
Writing selections in alv list header
Hi,
in alv list header i have to show the values entered in selection screen.
ex.
Current year : 2008
current period : 03
report ID : R_123
company code : I BT AA to BB
I BT CC to DD
I EQ FF
in the above example first three are parameters and company code is select-option, for parameters i can display what i want, but for company code( which is select option) it is showing only first line and not showing other lines.
at the time of filling list header table for select-option, i am looping the select-option, first i am filling with typ, key and info and for other i am filling only info, if i fill typ, key also for other recoreds also it is showing the company code in all lines as below ....
company code : I BT AA to BB
company code : I BT CC to DD
company code : I EQ FF
can any one suggest to get the list header as shown at the begining....
thanks,
bhushanHi,
Check this sample code. Here plant and date are selection screen paramters.
Plant
lwa_header-typ = 'S'.
lwa_header-key = text-t47.
If the select option for plant is 'EQ'
LOOP AT s_werks. "#EC *
IF s_werks-option = 'EQ'.
lwa_plant-werks = s_werks-low.
APPEND lwa_plant TO lt_plant.
CLEAR lwa_plant.
If the select option for plant is 'BT'
ELSEIF s_werks-option = 'BT'.
CONCATENATE s_werks-low
text-t50
s_werks-high
INTO lf_plant.
lwa_header-info = lf_plant.
APPEND lwa_header TO gt_header.
CLEAR lwa_header.
ENDIF.
ENDLOOP.
IF s_werks-option = 'EQ'.
READ TABLE lt_plant INTO lwa_plant INDEX 1.
lwa_header-info = lwa_plant-werks.
APPEND lwa_header TO gt_header.
CLEAR lwa_header.
LOOP AT lt_plant INTO lwa_plant FROM 2.
lwa_header-typ = 'S'.
lwa_header-key = ''.
lwa_header-info = lwa_plant-werks.
APPEND lwa_header TO gt_header.
CLEAR: lwa_header.
ENDLOOP.
ENDIF.
Post date Range
lwa_header-typ = 'S'.
lwa_header-key = text-t33.
If the select option for post date is 'EQ'
LOOP AT s_budat. "#EC *
IF s_budat-option = 'EQ'.
CONCATENATE s_budat-low+6(2) '.'
s_budat-low+4(2) '.'
s_budat-low(4) INTO lf_range.
For multiple values
IF lf_date_tmp IS INITIAL.
lwa_date-date = lf_range.
APPEND lwa_date TO lt_date.
ELSE.
lwa_date-date = lf_range.
APPEND lwa_date TO lt_date.
ENDIF.
If the select option for post date is 'BT'
ELSEIF s_budat-option = 'BT'.
CONCATENATE s_budat-low+6(2) '.'
s_budat-low+4(2) '.'
s_budat-low(4) text-t49
s_budat-high+6(2) '.'
s_budat-high+4(2) '.'
s_budat-high(4) INTO lf_range .
lwa_header-info = lf_range.
CLEAR lf_range.
ENDIF.
ENDLOOP.
IF s_budat-option = 'EQ'.
READ TABLE lt_date INTO lwa_date INDEX 1.
lwa_header-info = lwa_date-date.
APPEND lwa_header TO gt_header.
CLEAR: lwa_header.
LOOP AT lt_date INTO lwa_date FROM 2.
lwa_header-typ = 'S'.
lwa_header-key = ''.
lwa_header-info = lwa_date-date.
APPEND lwa_header TO gt_header.
CLEAR: lwa_header.
ENDLOOP.
ENDIF.
Appending work area to the header table
APPEND lwa_header TO gt_header.
CLEAR lwa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = gt_header.
<REMOVED BY MODERATOR>
Regards,
Ramya
Edited by: Alvaro Tejada Galindo on Apr 8, 2008 4:30 PM
Maybe you are looking for
-
How do I get PDFs to appear in the site search results?
I have read that the BC site seach will show PDF files in its results - http://forums.adobe.com/message/5077569. I have added a PDF via the media dowloads and added the litterate to a test page via the module {module_literature,a,}. I then reindexed
-
MSI GT735 VGA drivers update (HD3850).
Hi, VGA drivers for the MSI GT735 Ati Mobility Radeon HD3850 are now out of date... The ones available on MSI download site are catalyst 8.5 : http://eu.msi.com/index.php?func=nbdriver&maincat_no=135&prod_no=1517&driver_os_no=2#os The ones provided
-
When I'm trying to jump from a source report to target query via RRI, i get a warning msg (thought the query runs). I want to supress the msg. I tried supressing the msg in source query, target query and both of them together. Still the msg is being
-
Has anyone solved this problem (more Apple than Adobe); how do you get a new magazine app in front of reviewers prior to publication? Some form of pre-paid voucher that enables them to download the app (not the Folio) in time for them to write a revi
-
Hi All, I am trying to create a category in CRM 5.0 . Can anyone provide me with the standard FM or BAPI for Category Creation?Please provide me with a sample report program where in you have use to call the FM to create a Category.(if any). Thanks i