Looking for a 4s Verizon compatible tough case

Unfortunately Verizon felt they had to do it differently so I've found I need to be careful when choosing a case for my new phone.   Does anyone have a sturdy case to recommend?

Thanks OSXFreak, that's also a great looking case.
The case I bought is the Otterbox Defender.  It was about a toss up between the Otterbox and the Case-Mate Tough Case that I saw using the link from OSXFreak and I can't say one is better than the other.  I bought the Otterbox mainly because I found it in a store locally and I'd read good reviews on it so I grabbed it.  I work on the water and on steel decks, another reason for buying the Otterbox however I think I'd like the Tough Case as well.
Thanks for the help guys.

Similar Messages

  • Looking for a Intel-Solaris8 compatible modem

    hi,
    I'm trying to obtain a compatible internal modem for my Intel Solaris 8 box, any good recommendation? I would prefer one which will be recognised by Solaris 8 during installation. Thanks in advance for your advice!!
    rgrds,
    cmk168

    Thanks OSXFreak, that's also a great looking case.
    The case I bought is the Otterbox Defender.  It was about a toss up between the Otterbox and the Case-Mate Tough Case that I saw using the link from OSXFreak and I can't say one is better than the other.  I bought the Otterbox mainly because I found it in a store locally and I'd read good reviews on it so I grabbed it.  I work on the water and on steel decks, another reason for buying the Otterbox however I think I'd like the Tough Case as well.
    Thanks for the help guys.

  • WebLogic looking for class file using the wrong case

    During my ant build, I precompile my JSPs using weblogic.jspc. All of the jars and wars are packaged into an ear and deployed to WebLogic 8.1 on Linux. When I access one of our normal screens, everything is good. Things go wrong when I try to access one of our help screens. We have a base help file that includes another file based on the screen code passed to it. The screen code is used in combination with a HashMap to look up the correct JSP to include. This part goes fine. But when the JSP is included, I get the following error. The best I can figure is that the class file is in mixed case (i.e., SampleHelp00.jsp and SampleHelp00.class), but Weblogic is looking for samplehelp00.class.
    I'm not even where I should begin looking to solve this. Anyone have any ideas?
    ----- BEGIN STACKTRACE -----
    javax.servlet.jsp.JspException:
    [HTTP:101249][ServletContext(id=70634941,name=grp,context-path=/grp)]:
    Servlet class jsp_servlet._help.__samplehelp00 for servlet
    /help/SampleHelp00.jsp could not be loaded because the requested class was not found in the classpath
    /usr/share/weblogic/weblogic81/config/wftesttest/webSysServer02/.wlnotdelete/extract/webSysServer02_wf-web-sys.wftesttest_grp/wf-web-sys.wftesttest.war:
    /weblogic81sp5/weblogic81sp5/config/wftesttest/webSysServer02/.wlnotdelete/extract/webSysServer02_wf-web-sys.wftesttest_grp/jarfiles/WEB-INF/lib/Struts_Validator-20010702.jar:
    /weblogic81sp5/weblogic81sp5/config/wftesttest/webSysServer02/.wlnotdelete/extract/webSysServer02_wf-web-sys.wftesttest_grp/jarfiles/WEB-INF/lib/struts.jar:
    /weblogic81sp5/weblogic81sp5/config/wftesttest/webSysServer02/.wlnotdelete/extract/webSysServer02_wf-web-sys.wftesttest_grp/jarfiles/WEB-INF/lib/taglibs-session.jar:
    /weblogic81sp5/weblogic81sp5/config/wftesttest/webSysServer02/.wlnotdelete/extract/webSysServer02_wf-web-sys.wftesttest_grp/jarfiles/WEB-INF/lib/wf.wftesttest.jar:
    /weblogic81sp5/weblogic81sp5/config/wftesttest/webSysServer02/.wlnotdelete/extract/webSysServer02_wf-web-sys.wftesttest_grp/jarfiles/_wl_cls_gen.jar:
    /weblogic81sp5/weblogic81sp5/config/wftesttest/webSysServer02/.wlnotdelete/extract/webSysServer02_wf-web-sys.wftesttest_grp.
    java.lang.ClassNotFoundException:
    jsp_servlet._help.__samplehelp00.
    at org.apache.struts.taglib.template.InsertTag.doEndTag()I(InsertTag.java:149)
    at jsp_servlet.__su_hl0._jspService(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse; )V(__su_hl0.java:289)
    at weblogic.servlet.jsp.JspBase.service(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse; )V(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava/lang/Object;(ServletStubImpl.java:1072)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Lweblogic/servlet/internal/FilterChainImpl; )V(ServletStubImpl.java:465)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse; )V(ServletStubImpl.java:348)
    at weblogic.servlet.internal.RequestDispatcherImpl.forward(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse; )V(RequestDispatcherImpl.java:328)
    at org.apache.struts.action.ActionServlet.processForward(Lorg/apache/struts/action/ActionMapping;Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse; )Z(ActionServlet.java:1847)
    at org.apache.struts.action.ActionServlet.process(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse; )V(ActionServlet.java:1568)
    at org.apache.struts.action.ActionServlet.doGet(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse; )V(ActionServlet.java:491)
    at javax.servlet.http.HttpServlet.service(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse; )V(HttpServlet.java:740)
    at com.clear2pay.ppp.util.ui.struts.ActionServlet.service(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse; )V(ActionServlet.java:138)
    at javax.servlet.http.HttpServlet.service(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse; )V(HttpServlet.java:853)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava/lang/Object;(ServletStubImpl.java:1072)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Lweblogic/servlet/internal/FilterChainImpl; )V(ServletStubImpl.java:465)
    at weblogic.servlet.internal.TailFilter.doFilter(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Ljavax/servlet/FilterChain; )V(TailFilter.java:28)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse; )V(FilterChainImpl.java:27)
    at com.clear2pay.ppp.util.ui.SetCharacterEncodingFilter.doFilter(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Ljavax/servlet/FilterChain; )V(SetCharacterEncodingFilter.java:150)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse; )V(FilterChainImpl.java:27)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run()Ljava/lang/Object;(WebAppServletContext.java:6987)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Lweblogic/security/subject/AbstractSubject;Ljava/security/PrivilegedAction; )Ljava/lang/Object;(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(Lweblogic/security/acl/internal/AuthenticatedSubject;Lweblogic/security/acl/internal/AuthenticatedSubject;Ljava/security/PrivilegedAction; )Ljava/lang/Object;(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(Lweblogic/servlet/internal/ServletRequestImpl;Lweblogic/servlet/internal/ServletResponseImpl; )V(WebAppServletContext.java:3892)
    at weblogic.servlet.internal.ServletRequestImpl.execute(Lweblogic/kernel/ExecuteThread; )V(ServletRequestImpl.java:2766)
    at weblogic.kernel.ExecuteThread.execute(Lweblogic/kernel/ExecuteRequest; )V(ExecuteThread.java:224)
    at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:183)
    at java.lang.Thread.startThreadFromVM(Ljava/lang/Thread; )V(Unknown Source)
    ----- END STACKTRACE -----
    Message was edited by:
    cabuki

    Ignore the part about precompiled JSPs being ignored on my development server. Turns out I had a stale cache. I cleared that out and now it recognizes the files.
    The problem with that, is now I'm getting an Error 500 when I try to access the page.
    ----- BEGIN STACKTRACE -----
    javax.servlet.jsp.JspException
         at org.apache.struts.taglib.template.InsertTag.doEndTag()I(InsertTag.java:149)
         at jsp_servlet.__su_h0._jspService(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse; )V(__su_h0.java:316)
         at weblogic.servlet.jsp.JspBase.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse; )V(JspBase.java:33)
         at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object; (ServletStubImpl.java:996)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl; )V(ServletStubImpl.java:419)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse; )V(ServletStubImpl.java:315)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse; )V(RequestDispatcherImpl.java:318 )
         at org.apache.struts.action.ActionServlet.processForward(Lorg.apache.struts.action.ActionMapping;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse; )Z(ActionServlet.java:1847)
         at org.apache.struts.action.ActionServlet.process(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse; )V(ActionServlet.java:1568 )
         at org.apache.struts.action.ActionServlet.doGet(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse; )V(ActionServlet.java:491)
         at javax.servlet.http.HttpServlet.service(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse; )V(HttpServlet.java:740)
         at com.clear2pay.ppp.util.ui.struts.ActionServlet.service(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse; )V(ActionServlet.java:138 )
         at javax.servlet.http.HttpServlet.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse; )V(HttpServlet.java:853)
         at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(ServletStubImpl.java:996)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl; )V(ServletStubImpl.java:419)
         at weblogic.servlet.internal.TailFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain; )V(TailFilter.java:28 )
         at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse; )V(FilterChainImpl.java:27)
         at com.clear2pay.ppp.util.ui.SetCharacterEncodingFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain; )V(SetCharacterEncodingFilter.java:150)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse; )V(FilterChainImpl.java:27)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run()Ljava.lang.Object;(WebAppServletContext.java:6458 )
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Lweblogic.security.subject.AbstractSubject;Ljava.security.PrivilegedAction; )Ljava.lang.Object;(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Lweblogic.security.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.AuthenticatedSubject;Ljava.security.PrivilegedAction; )Ljava.lang.Object;(SecurityManager.java:118 )
         at weblogic.servlet.internal.WebAppServletContext.invokeServlet(Lweblogic.servlet.internal.ServletRequestImpl;Lweblogic.servlet.internal.ServletResponseImpl; )V(WebAppServletContext.java:3661)
         at weblogic.servlet.internal.ServletRequestImpl.execute(Lweblogic.kernel.ExecuteThread; )V(ServletRequestImpl.java:2630)
         at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest; )V(ExecuteThread.java:219)
         at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:178 )
         at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread; )V(Unknown Source)
    ----- END STACKTRACE -----
    The page in question is just a simple JSP using Struts (v 1.0.2) to call in a template.
    ----- BEGIN JSP -----
    <%@ page language="java" contentType="text/html; charset=UTF-8" %>
    <%@ taglib uri="/WEB-INF/lib/struts.tld" prefix="struts" %>
    <%@ taglib uri="/WEB-INF/lib/struts-bean.tld" prefix="bean" %>
    <%@ taglib uri='/WEB-INF/lib/struts-template.tld' prefix='template' %>
    <template:insert template='/t/system.jsp'>
    <template:put name='title'><bean:message key="tit_su_h0"/></template:put>
    <template:put name='sidenav' content='/t/su_snv.jsp'/>
    <template:put name='content' content='/c/su_h0_c.jsp'/>
    <template:put name='footer' content='/t/su_ftr.jsp' />
    </template:insert>
    ----- END JSP -----
    I passed the -keepGenerated flag to the precompile task in my Ant build so I could look at the line it's choking on, but it's not very helpful. I'm stuck. I can set up the build so it doesn't precompile the JSPs, but then the QA team wouldn't like me very much.

  • Looking for MS Excel & Word compatible iPad Apps

    I'm looking for iPad apps for Excel and Word that I can transfer to my iMac and work on using MS Office.  Any recommendations?

    There are a number of apps that are compatible with Office documents. Apple makes iOS versions of their own iWork apps (Pages, Keynote, Numbers) that are available free if you purchase a new iOS device and that can be purchased separately for older devices. There are also 3rd party combined suites that cost less than the separate Apple apps. Ones often recommended include Documents 2 Go,  Quickoffice and Office2 HD.
    If you can accept needing a network connection whenever you want to use the apps and have an Office 365 subscription, Microsoft has just released their Office Mobile app, though it has significant limitations. Or a server-based solution such as CloudOn might be an option for you.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base before you post a question.
    Regards.

  • I Am looking for parameterisation documents and UAT test cases of all modules,

    Hello Team,
    Flexcube 12 version test cases, I do have them but looking for flexcube old version. If any body can share it will be  help full and there will be some meaning in become a member of this group. my id is
    [email protected]

    p.lagatta wrote:Jon, Thanks for the reply.  The Siderwinder Firewalls associate a Multicast MAC address with the vIP.  That's the reason for the static ARP entry in each router.  Since our Layer II switches located between the firewalls and routers do not register the MAC with a specific port, both firewalls receive the traffic.  Once the traffic reaches the firewalls, they pass information across a heartbeat interface and the selection process is based on odd / even ports.  Receive traffic is already working in this configuration.  Both our external routers are peered with two EBGP routers located in the same AS.  The GLBP implementation will allow us to load balance the traffic each firewall is sending to the GW address.
    Perhaps i'm misunderstaning.
    If there is one mac-address then GLBP will assign that mac-address to one of the routers and it will keep that router for forwarding the traffic with the same mac-address. So the traffic will always be forwarded by the same router. GLBP works by assigning different source mac-addresses to different routers within the same group but it sounds like the source mac-address is always the same from the firewalls.
    Jon

  • Looking for somewhere to sell Video Ipod cases for WOMEN

    HI ALL !
    DO YOU KNOW WHERE CAN I BUY IPOD CASE FOR WOMEN ..FOR ME .. BECAUSE ALL I SEE BLACK COLOR CASES FOR MAN .. THANK YOU

    I don't get the male/female distinction frankly. To me it's just a quetion of what your style is, what material you'd prefer and whether you are after a case or a skin and waht you're going to be doing with the iPod - working out, being outside in the rain and so on.
    I have just bought a Vaja (vajacases.com) - as a Christmas gift from my parents and I'm really happy to have done so. Don't have it yet, but I'm sure it wont disappoint and at 50 pounds UK for everything incl p & p I don't even think it is that xpensive. Check the site out and you'll see that you can choose from quite a large range of colours.
    They're not as cheap as some, but that's the way I went 'cos it fits my needs.
    A

  • Looking for Lion compatible All-in-One printer

    Looking for MacBook Pro Lion compatible All-in-One color printer for my Mom who is 77 and on a limited income when it comes to purchasing ink. Preferred options include wi-fi, auto duplex, memory card slots, easy to operate. I was leaning toward a Kodak printer but majority of reviews indicate when any one of the ink cartridges is empty no more print jobs will process until the empty cartridge is replaced. In addition, folks indicate even though ink is less expensive, replacemnet is more frequent indicating that perhaps the cartridge capacity is smaller in size. Both are deal breakers. Canon PIXMA MX892 Wireless and the HP Envy series both appear impressive but I am confused regarding compatibility with Lion. Appreciate experienced recommendations, Thanks

    ChrisPbass,
    I would suggest contacting HP Home & Home Office. They will be able to narrow down the field to what would be best for your particular use. There number is below.
    1 (888) 999-4747.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Looking for a Hard Case/Shell for my new Retina MacBook Pro 15"?

    I am looking to buy a shell/case for my rMBP (October 2013) it hasn't arrived yet, but obviously I want it to be protected asap.
    I don't know what the model number is, but it is the lower spec 15" Retina MacBook Pro that I have purchased. How can I make sure that a case I buy will fit?
    Will any 15" rMBP case fit, or has the size changed for this upgrade?
    I am looking for either a black/clear, shell/case that will attach to the back of the lid to protect it. I am looking on eBay at the moment, as I have a voucher to spend on there anyway. Can someone recommend a shop/seller or a particular product?
    I am in the UK, so I would obviously prefer to buy from a local seller.
    Thanks!

    I purchased the Hardshell Case for 13-inch MacBook. It offers a durable hardcase construction that securely covers your notebook. It provides a frosted hardshell exterior, soft-touch coating, raised rubber feet, thermal vents, and trouble-free access to all features.
    Features
    Excellent notebook protection
    Exterior rubberized soft-touch coating
    Precise cut-outs for access to magnetic power cable, headphone and microphone input jacks, CD-ROM drive, battery level check button, and all side ports
    Vents and rubber feet elevate notebook from surface, allowing notebook's internal fans to circulate air more freely
    Simple to use and easy to clean
    I really love it. My friend has dropped their macbook (the case was on) on the concrete and nothing happened to the computer.
    Hope this helps you.

  • Looking For Strong Mac Case

    Hi,
    I have a 13" MacBook Air, Mid 2013.
    I am really worried about dropping my MacBook and breaking it. I am looking for a reasonably priced have duty case, like the ones that snap on to it and I have full flexibility of the hinge and that.
    Could anyone recommend a good case for my Mac.
    Thanks.

    Having tried every brand out there, I can honestly say that Booq is one of the best!
    http://www.booq.com
    I highly recommend their Vyper M3 sleeve too!
    Good luck!

  • Multiple ipad Carrying case? Looking for some form of a case where elementary students can transport 20 ipads safely up or down staircases

    I am a teacher and my building just purchased a set of 25 ipad 2s.  I am looking for some form of a carrying case where a teacher or students can take 20-25 ipads from the iPad storage cart and carry it to the classroom.  Some classrooms are on the second floor so something that would hold them safely would be great. Thanks for the help!!

    Check out the carts on this page.  Great ways to spend taxpayer dollars!
    http://www.apple.com/education/labs/
    An Apple iPad Learning Lab streamlines the management of classroom sets of iPad devices. Each lab includes 10 iPad devices and a sturdy and secure mobile cart. The cart can store, charge, and sync up to 30 iPad devices and has room for a MacBook computer. The cart rolls easily around campus, so multiple classes can benefit, and it can be locked to secure the devices when they’re not in use. For even more iPad portability, the Bretford PowerSync Tray can charge, sync, store and secure up to 10 iPad devices at once and is available only through Apple. Purchase a predesigned Apple iPad Learning Lab or let us help you build your own iPad mobile lab.

  • What to look for in a video camera

    i have an apple ibook 700 mhz with imovie....but ill be buying a mac mini within the next few months so i will then have idvd..what are some things that i need to make sure i look for in a video camera. like i dont want to buy something that isnt going to be compatible with my ibook/macmini. im assuming i want a mini dv recorder. any help is greatly appreciated thanks

    ... ah,we had that a while ago... no bookmark... hm?? :
    * miniDV, no miniDVD/flashmem/whatever..
    * firewire connected (all miniDV do so, some call it iLink or IE1394) ask dealer for a cable! (some manufacturers "forget" to include...)
    * stay with the big brands, no exotic cheapos...
    * I highly recommend Sony, pic & audio quality perfect! very good energy management ("stamina")
    * in case you need: look for ext. mic plug-in
    * in case you need conversion from analogue (beta, VHS, PSP..), look for analogue-IN
    * spending BigBucks: HD is a nice-have, but besides playback to tape no other media in sight ("HDDVD")
    * 3ccd has "better" pic quality, better lowlight/lowkey quality
    * you shouldn't pay for any in-camera-fx (sepia, posterize, ...), you'll do that in iMovie...
    * get hands-on experience in shop! some cameras are too small...
    * set camera to 16bit audio (my Sony "prefers" 12bit - NoGo with iApps)
    * get a tripod

  • System is looking for a Western Digital drive

    I've had a Spotlight indexing problem that seems to be partially fixed but I see something in console under the system log that may be preventing Spotlight from finishing it's indexing.
    Here's the reference:
    Sep 17 11:28:57 Macintosh-2 WDDriveManagerStatusMenu[167]: *** attempt to pop an unknown autorelease pool (0x843400)
    This is a reference to a Western Digital Drive...the drive was put in a new case.
    I keep getting this error message in Console in the system log...Spotlight gets to within 30 secs of indexing, then keeps delaying it's completion.  Could this error message be preventing the completion?

    People used to get that Console message before WDDriveManager was updated for Snow Leopard. Back in 2009-2010, it was not compatible with Snow Leopard.
    Do you have the latest updates installed for WDDriveManager?
    Secondly, my understanding is that the main purpose of WDDriveManager is to enable functionality of lights and buttons on the WD hard drive case. However if you moved the drive to a new case, perhaps such functionality is no longer relevant or perhaps there is a conflict there (software looking for a certain type of HD case but can't find it?). In that case, you might consider removing or uninstalling WDDriveManager as it might no longer work with this new case you have.
    Are you using Snow Leopard? (I assume so because that's this forum, but your post indicates 10.4). Do you have the latest version of WD software? What are you using the WD software for? Is your HD case compatible with WD's software?

  • Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

    Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

    I love the Smart Cover. It fits the way I work and I love the instant on/off and the always available screen protection. I wouldn't use my iPad without it.
    I got a Cover Buddy for the back, because I wanted the back to be less slippery when I'm using the iPad in the classroom, teaching. I picked this back cover because it's VERY lightweight, easy to get on or off and, protects the corners, has accurate cutouts for the ports, and (in the colors) has a rubberized surface:
    http://www.switcheasy.com/products/CoverBuddy/
    I have a Built NY "hoody" slip on case with a hard internal shell that I use when I'm in the field and I can put the iPad with the Smart Cover and the Cover Buddy inside this . But for everyday use, the Smart Cover with the Cover Buddy is a terrific combination.

  • I'm looking for a digital picture frame that is compatible with the iPhone 5 and 4S.  I was looking at the Panasonic MW-20 but from what I can see I don't think it is.  Any information would be great!  Looking to buy a replacement frame for Christmas.

    I'm looking for a digital picture frame that is compatible with the iPhone 5 and 4S.  I was looking at the Panasonic MW-20 but from what I can see I don't think it is.  Any information would be great.  Looking to buy a replacement for Christmas.  Thanks!

    Hi - the new lightning connector on the iPhone 5 has an authentication chip so very few 3rd party manufacturers have come out with compatible devices - so I doubt that you will find a frame that works for both phones - however Apple has come out with 2 apapters - one is a cable and one is a direct 30 pin to lightning device - you would have to check out each frame to see if one of these might work - I looked at the Panasonic and it looks promising but I would check the return policy of anything that you buy in a case it doesn't work.

  • Looking for a retail available camera that is compatible with FMLE

    I am looking for a retail available camera that is compatible with FMLE.  I do not have a computer with HDMI input, and in the past, I have typically ran with a USB connection.  Does anyone know of a camera that is available at a local retail store that would work with FMLE through a USB connection?

    Webcams will work, although they may not give you the flexibility that you're looking for with a more traditional "camera".
    You may be more interested in looking at a converter/digitizer -- something that can take a variety of inputs and pull those into your computer as a a video source that your computer, and FMLE, sees as a "camera". 
    Look at this page:  http://www.adobe.com/products/flashmediaserver/flashmediaencoder/devicematrix.html
    You'll see a variety of webcams, capture cards, cameras, and other devices that are known to work with FMLE.  Most of those solutions, however, require the installation of a card or require that you have Thunderbolt connections or FireWire connections.  Not on that list is the Dazzle line of digitizers.  I know several people who use Dazzles with FMLE -- and while each one seems to have issues that you have to be aware of, they do work (some better than others).  As long as you're aware of the issues, it's not a problem working with these devices -- and they're pretty inexpensive.  The Dazzle Video Creator Platinum seems to have the least amount of problems (the only real problem that I'm aware of is that you have to be sure to disable your preview windows in FMLE if you want to make changes to the source settings -- or it will crash FMLE.  But, once you get your settings in place you can enable the preview windows again and don't have to worry about it).  The great thing about a digitizer is that you can now use any camera that can output to standard composite cables (the yellow, red, and white 'RCA' cables -- or SVideo cable).  So your camera selection possabilities increase greatly.
    If you're looking for a standalone camera that can deliver a live video feed through USB -- good luck.  I'm sure they're out there, but your choices are going to be very limited.
    Personally, I use the Canopus ADVC110 -- which allows me to hook up any camera (or even a playback deck/DVR/DVD player, etc.) that can output composite (RCA) or FireWire or S-Video.  The ADVC110 will not work for you, as you need FireWire to hook up to your computer, but just in case you do have FireWire I can tell you that it is a stellar box with no issues at all.

Maybe you are looking for