Looking for an ABAP-code for the customer-Exit Variable

Hello,
I have defined a Variable (Interval) which should be processed through Customer-Exit on characteristic Supplier-Date (date format). This Customer-Exit Variable is called ZDATE.
We have another time characteristic Fiscal year / period (0FISCPER) which has single mandatory input variable for ex. 003.2011. This input variable is called ZFISCPER.
Now I have to write an ABAP-Code where the customer exit variable ZDATE is derived (fiscal last year to last period) from input variable ZFISCPER in INCLUDE ZXRSRU01.
Means when the input variable (ZFISCPER) is 003.2011 then the customer exit variable ZDATE should be calculated in INCLUDE ZXRSRU01 as 01.01.2010 u2013 28.02.2011 (fiscal last year to last period).
Since I am quite new in ABAP, I will be grateful if you could write me sample ABAP for this.
Many thanks.

Hi,
should be something like:
DATA: l_s_range TYPE rsr_s_rangesid,
input LIKE sy-datum.
When 'ZDATE'
CONCATENATE '0101' 0FISCPER+3(4)-1 into l_s_range-low. "You get 01012010
CONCATENATE '01' Fiscper+1(6) into input. "You get 01032011
l_s_range-high = input-1. "You get 28022011
APPEND l_s_range TO e_t_range.
Greetings
Roman

Similar Messages

How to insert a code for a function module into a Customer Exit Variable?

I have two Key Figures viz., Net Prchs Rtl, and Net Prchs Unt. Both these Key figures have This Week (TW) and Last Week (LW). There is a variable for This week but there is no variable defined for Last week.
I need to get data in the column LW (Last Week) for both the key figures.
In function module EXIT_SAPLRRS0_001 one of the functions I have is:
Get the previous Fiscal Week
          CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
I need to create a new variable to get values in the Last week column for different key figures and use function 'DATE_TO_PERIOD_CONVERT' in that variable.
Can anyone please explain me the steps as to how to use a function module in a variable so that when the variable is used in a key figure it shows the output.
In other words what I want to know is after creating a Customer exit variable of type Characteristic value how do I refer the above mentioned function moduel and insert the code for the function module into the Customer exit variable that I created.
Thank you.
TR.

Hi Wond,
Thanks a lot for your reply. I understand what you mean but I have never done this before so can you please explain it in a detailed manner. I have the following code:
Get the previous Fiscal Week
          CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
            EXPORTING
              i_date         = ld_date
              i_periv        = lc_periv
            IMPORTING
              e_buper        = ln_poper
              e_gjahr        = ln_bdatj
            EXCEPTIONS
              input_false    = 1
              t009_notfound = 2
              t009b_notfound = 3
              OTHERS         = 4.
          IF sy-subrc <> 0.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ELSE.
            lc_poper = ln_poper.
            CONCATENATE ln_bdatj lc_poper+1(2) INTO wa_e_t_range-low.
            wa_e_t_range-sign = 'I'.
            wa_e_t_range-opt = 'EQ'.
            APPEND wa_e_t_range TO e_t_range.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDIF.
I believe I should now use the above code in my customer exit variable. If that's right can you please explain me the steps as to how should I do this so that the variable gets populated.
Thank you.
Regards,
TR.

Problem in transporting the Customer exit variable

Hi all,
i have careated a variable to capture the current date in my report, with the processing type, Customer Exit. and, its getting populated fine in my DEV environment. basically, i have to compute the number of days, in which net due date is being compared to the current date. when i transport this to the QA environment, the values for number of days is gettting some junk value, wherein in DEV its showing the exact values. It seems i have to take cetain measures in transportation of the Customer Exit.
please advice.
Thanks in advance
Sneel

Hello ,
In the Quality after you run the report check in the layout option>display text elements> variables and check what value is displayed for the use exit variable , if it is correct then problem may be in the selection you gave when you run the report if the user exit variable value is wrong , then set a break point in the code and run the report from rsrt and check where the error is.
hope it is clear
assign points if useful

Logic of the Customer Exit Variable

Hi Experts,
Could you please explain me the logic (Functionality) of the below Customer Exit Variable .....
WHEN 'AKFR05'. "M-5 monthly forecast version
        CALL FUNCTION 'END_TIME_DETERMINE'
          EXPORTING
            duration         = -5
            unit             = 'MON'
            factory_calendar = l_LACID
          IMPORTING
            end_date         = l_fn_dte
          CHANGING
            start_date       = sy-datum
            start_time       = sy-uzeit.
        CHECK sy-subrc = 0.
        CLEAR l_s_range.
        l_s_range-low(4) = 'LGMN'.
        l_s_range-low+4(6) = l_fn_dte(6).
        l_s_range-sign = k_sign_inclusive.
        l_s_range-opt = k_option_equals.
        APPEND l_s_range TO e_t_range.
Thanks in Advance

Thanks for the update...
The First Part
        CALL FUNCTION 'END_TIME_DETERMINE'
          EXPORTING
            duration         = -5
            unit             = 'MON'
            factory_calendar = l_fcalid
          IMPORTING
            end_date         = l_fn_date
          CHANGING
            start_date       = sy-datum
            start_time       = sy-uzeit.
For Example:
    Current Date : 27.04.2009
By using the FM END_TIME_DETERMINE the END_DATE (27.11.2008) is exported to l_fn_date
Could you please explain me the logic after exporting the end date
l_s_range-low(4) = 'LGMN'.
        l_s_range-low+4(6) = l_fn_date(6).
        l_s_range-sign = k_sign_inclusive.
        l_s_range-opt = k_option_equals.
        APPEND l_s_range TO e_t_range.
Thanks in Advance

Code (ABAP) for the Customer Exit Variable (CMOD)

Scenario
An employee can purchase any no of policies in a day or month.each policy will have start date and expiry date.
My requirment
Count all the policies(valid) by employee on a ranges basis exception reporting
(0-10;10-20;20-30;30-40) and then able to drill down by policy start date and expiry date.
As per the requirment is to show policies that employee had with in the give date intreval which are not yet expired (active) i need to write a condition that will count only policies whose Expiry date is > Current calender day
As Policy Expiry Date is a char i am converting it to KF using fourmala variable so that i can write a condition on it using current cal day formula variable sap exit
Requirment:
Need a code for SAP exit variable which will meet the following requirment
There are the following 2 variables in the query
1) A variable (User Input)(Date Range) on Policy Start Date and
2) Authorisation Variable which is based on Authorisation Object(Analysis Authorisations)
I need a SAP Exit variable (CMOD) that will
BAsed on the user entered Policy Start date it has to pick all the policy exiry date of the policies and display all the policies whose expiry date is greate than Sy Date (Current Date) and also if Policy Expiry Date is blank or # it has to display
Arun supplied me with the below code...but i think it doesn't include blank expiry date or #...as i am new to ABAP please update me with releavent code
Policy Start Date : ZPST_DTE
Policy Expiry Date: ZPSP_DTE
Variable (Type:Customer Exit) on Expiry Date: ZEEXP_DTE
Arun's Code:
IF I_STEP = 1.
CASE V_NAME
WHEN 'X' " X is the variable u created for the exit
l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.
END CASE.
Please modify above code to include Blank or # values of Expiry Date
Thanks Arun
Please ask if you need further info as this is urgent
Thanks

Hi Arun,
Thanks for the help...will definetly assign points
(Closed the previous thread)
Please spare bit of ur time as this is my first ABAP Code
Can i include 2 restrictions..# and Variable (Customer Exit)...But how can i include Records with Blank Values
As the data from Source system the expiry date is filled up with either Date or # or Blank...my requiorment is to include all 3 and
Question:
As there are 2 other variables defined ..one on Policy Start Date (User input date intreval) and Location (Authorization Variable..Analysis Authorisations)...Do i need to change I_STEP in the code
(Req: Reports shows all the(still valid) policies emp has purchased between 2 give date (Variable on Policy Start date)
IF I_STEP = 1.
CASE V_NAME
WHEN 'X' " X is the variable u created for the exit
l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.
END CASE.

How to use Multiple Single Option for selection in the Customer Exit

Hi,
How can we handle the multiple single values in the customer exit variable.
I have a requirement which is as follows -
Table A fiields -> Field Coach, Partner 2, Relation between PArtner 1 & Partner 2, Valid from, valid to date.
Table B -> Service Month, Start Date, End Date.
Table C -> Billing Date, Execution Partner,cal month /year.
For the Field coach in TABLE A, multiple Partner 2 are present.
Report has to be built on Table C.
User inputs the Service month and Field Coach . User can enter multiple field coach values.
For the All the Field Coach values entered, corresponding Partner2's have to be found from Table A and to be passed to the Execution Partner in Table C.
Now if we want to use customer exit variable on the field Execution Partner, how can we handle the Multiple Single selections in the customer exit.
Thanks,
Shubham

Hi,
While creating the variable you must have to specify multiple value.
In customer exit
write code multiple times and append the values.
For example:
when 'variable'.
l_s_range - sign = 'I'.
l_s_range - OPT = 'EQ.
l_s_range - LOW = EXECUTION PARTNER 1.
APPEND L_S_RANGE TO E_T_RANGE.
l_s_range - sign = 'I'.
l_s_range - OPT = 'EQ.
l_s_range - LOW = EXECUTION PARTNER 2.
APPEND L_S_RANGE TO E_T_RANGE.
l_s_range - sign = 'I'.
l_s_range - OPT = 'EQ.
l_s_range - LOW = EXECUTION PARTNER 3.
APPEND L_S_RANGE TO E_T_RANGE.
Regards,
Ranganath.

Customer exit Variable for Previous 12months Rolling based on 0calday

Hi Experts,
I am creating a Customer exit variable to derive Rolling 12 months based on calday,
Could you please any body correct the below code,
Or if you any body have pseudo code based on calday, could you please pass to me
WHEN 'zcalday'.
* Rolling 12 months to period
    IF i_step = 2.
      CLEAR: l_s_range, loc_var_range,
      LOOP AT i_t_var_range INTO loc_var_range
        WHERE vnam = 'RYEAR'.
   MOVE sy-datum TO: lv_date_from,
                                    lv_date_to.
           zmonth = lv_date_from+4(2)
       l_s_range-high = zmonth = loc_var_range-low.
        v_fiscper = v_fiscper - 12.
        l_s_range-low = v_fiscper.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'BT'.
        APPEND l_s_range TO e_t_range.
      ENDLOOP.
    ENDIF.
Thanks and regards
Sree

Hi Yasemin,
Thanks for your help,
I have small clarification, I have following data in base cube,After restricting the customer exit variable
on revenue I suppose I will get one Amount, i.e 7800, But If I want month wise, Do I need to create offset? or without creation of offset is there any way that will split based customer exit variable.....
Thanks a lot
regards
Sree
Execution date
24/06/2014
Comp Code
Date
Revenue
C100
01/07/2013
100
C100
01/08/2013
200
C100
01/09/2013
300
C100
01/10/2013
400
C100
01/11/2013
500
C100
01/12/2013
600
C100
01/01/2014
700
C100
01/02/2014
800
C100
01/03/2014
900
C100
01/04/2014
1000
C100
01/05/2014
1100
C100
01/06/2014
1200
Total
7800

Customer Exit Variable to fetch the data from the cube..

Hello Gurus,
I am having a requirement to select the latest changed record from the cube while executing the query. where we are having the Calday as the date with a variable .
I suggested my client we can filter it at the DSO leve or Data loading level but my client dont want to distrurb the existing design so he want to perfrom the changes at the Query level only.
For Example we are having below records in the cube.
PO             Material     Calday       Qty         Price
101            ABC          1/12           100         10
101            ABC          2/12            100         10
101            ABC          3/12            100         11
I am having Calday in the selection screen as the variable.
Now from the above example i need to show the record which has been changed on 3/12.
For this i am planning to write the customer exit variable on the calday , when the user enter the range of Calday then i will fetch the whole records which fall in between the range and i will sort each PO with respect to the date and i will pick those which are the latest records.
My Concerns:
!. Kindly let me know if it is possible and what are the other things that i need to consider.
2. Did it will impact the performance.
Waiting for your quick replies
Thanks & Regards
KK

Hi Mate,
Sorry for late reply.
By d way in your word.
initially when the user enter the date range as the vairable input. suppose 1/12 to 31/12 then i will pick all those records which fall in this range.
suppose the records are
PO Date
P1 01/12
P1 02/12
P2 02/12
P2 03/12
P3 03/12
P3 04/12
In the customer exit variable Now for each PO i will sort the date in ascending order and i will pick the last record to display it in the Report.
The ouput will be
PO Date
P1 02/12
P2 03/12
P3 04/12
Now hope you are aware about exit variable concept.
so what value will pass in the calday filter.
here after sorting on each PO , you will get 3 different dates, 02/12 for P1
03/12 for P2
and 04/12 for P3
Now if you are aware about exit variable concept, then you will pass this three date to CALDAY(I_t_VAR_Range-low = ...)
but how query will understand that for P1 calday filter value is 02/12, for P2 calday filter value is 03/12.... and so on...
actually i have also experienced this kind of issue 1-2 years before, i have tried same thing at that time without thinking and stuck with this problem..
By d way you can also learn from your mistake.. so just try ur logic and then you will understand what is the problem?
By d way this will not work, parallel you can work on other solution.

Customer exit variables

Hello,
I have created two customer exit variables, although I'm not an ABAP expert. Both are calculated based on two optional variables selected by the user.
When running my query I get the message "Warning Value '' is too long for variable ZPERSTRT". I suppose that really means the value is empty while a value was expected. The type of this variable is 0DATE.
I try checking the code to examine how the value can be empty, and that results in a few questions some of you probably can answer.
Unfortunately, for complex reasons I have to program the customer exit variables in the development system, while testing them in the test system where I don't have access to the ABAP editor.
QUESTION 1
When finding the values of the other variables, I must be prepared to find them without a value. How can I know if they have a value or not? I've tried with the following code, which I suspect is not working quite as expected:
      LOOP AT i_t_var_range INTO loc_var_range
        WHERE vnam = 'ZCALWINT'.
        IF loc_var_range-low <> ''.
          l_week0 = loc_var_range-low.
          l_flag = 1.
        ENDIF.
      ENDLOOP.
I later use l_flag to check if a value was found or not.
QUESTION 2
How is type conversion done in a statement like
date = string + 1
If string has the value "20071031", will 1 be added as a string (resulting in "200710311" which is then somehow converted to a date), like a number (resulting in "20071032" which is then somehow converted to a date) or like a date (resulting in "20071101")?
QUESTION 3
More type conversion. Would it be ok to concatenate year, month and day into a date variable, or should I always concatenate into a string which can then be converted to a date afterwards?
QUESTION 4
If the variable I want to read has an interval and not only a single value, is the only way to see this by checking the -high value? If this one has a value it is an interval, if not it is a single value? Or can I be sure the -opt value will be 'BT' if it's an interval?
Thanks and regards,
Christoffer

Anyone?
I'll award 10 points to the best overall answer and 6 points to answers which are first or best on one of the four questions.
Regards,
Christoffer

Display Error Message in BW Report based on Customer Exit Variable

Hi
I need to display an error message in the BW report based on the value of a customer exit variable - i was able to do this successfully in BW3.5 using the below code.
WHEN 'ZUPN'. "Here ZUPN is the customer exit variable
    IF i_step = 1.
      <check for condition -- if successful, variable flag = 1, else variable flag = 0>
      IF flag = 0.
        MESSAGE e157(00). "Error Message
      ENDIF.
    ENDIF.
I have upgraded my system to BI 7.0 now. Whenever the variable check is not successful, it displays a blank screen instead of the error message in the report. Please advice if we need to change the code and how ??

Bhanu,
Thanks for u r reply.This warning message appears every time i execute the report through portal.
Any idea ?
Regards
Mano

Customer Exit Variable in SAP BI

Hi to all,
Please can any body tell me , What is Customer Exit Variable in SAP BI , how to use it , why we use it.
please also sned any website link , or any PDF or DOC file that have example to explain Customer Exit Variable in SAP BI.
I shall be thankfull to you for this.
Regards
PAVNEET RANA

Hi,
Customer Exit Variable in SAP BI : is used to calculata MTD,YTD, and some other calculations.
You can define variables with Customer Exits and then write code in CMOD. See the Article/Blogs in the same
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
CHeck the Following Articles.
Customer Exit Variables in BW/BI Reports
Using Customer Exit Variables in BW or BI Reports Part - 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/using%20customer%20exit%20variables%20in%20bw%20or%20bi%20reports%20part%20-%201.pdf
How to use Customer Exit Variables in BW Reports: Part - 2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20use%20customer%20exit%20variables%20in%20bw%20reports%3a%20part%202.pdf
Using Customer Exit Variables in BW/BI Reports Part - 3
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10fc4382-afa6-2c10-1380-fa224fe4324f&overridelayout=true
Using Customer Exit Variables in BW/BI Reports: Part - 4
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0fefc77-40e3-2c10-8da3-d4bfcb013387?quicklink=index&overridelayout=true
Calculating the Ageing of the Materials
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/calculating%20the%20ageing%20of%20the%20materials.pdf
Thanks
Reddy

Customer exit variable - missing values

Hello experts,
Has anyone ever encountered this problem?
We have a customer exit variable, based on 0VENDOR. In the customer exit we simply fill in a variable with the values in this master data table. By debugging we can see how the e_t_range structure gets filled in correctly with all the values in the master data, for example 2,300 values, the same values we expect to see in the report but we don't know why at some point after our code in the customer exit and in the standard code, our variable contains less values and only an incorrect number of values gets displayed in the final report.
Any ideas on this would be very much appreciated.
Many thanks in advance,
Inma

Hi,
Are you sure you're losing some values?
Remember that if no values exist for a master data value on the InfoCube, no line will be shown, so you could see less than 2300 lines.
You could probably try to show filter values on the query and check if they match with your e_t_range.
Regards,
David.

Behavior of customer exit variables (used as prompt) in a workbook

Hi All,
We are on NW2004s. I am using a customer exit variable in the prompt for my query then saved the query as a workbook.
1. When I run the query the customer exit routine/program is called and the selection screen variable is populated with the correct value.
Ex. Calendar year variable is a prompt variable defined as customer exit variable that gets the current year.
when you run the query the prompt for calendar year shows "2007" as default value. this is correct.
2. when I run the workbook using this same query, it looks like it is not executing the customer exit program. The value in the calendar year prompt is whatever the last value used when the workbook was last ran.
I also placed a breakpoint in the customer exit program (EXIT_SAPLRRS0_001) to check if it is being called and it looks like it isn't.
Is there a configuration/property that I should enable/check to make sure that customer exit variables used as prompts works in workbooks? Is this a bug? Anybody else have issues with using customer exit variables as prompts in their workbooks?
Thanks in advance,
Malou

Hello Marilou,
See the abswer I got from the 1st response on my question
Save and reuse variable option in 7.0
It may be a good help.
Variables seem to be an understated item in the documents.
Kind regards
Message was edited by:
BI developer

Problem with Bex Customer Exit Variable

Hi Friends,
I have a customer exit variable which is getting filled based on the User Input. I have written the code inside the If condition checking i_step = 2. The code is working as required.
But the problem is when I try refreshing the query or change the user variable selection, the Customer exit variable is not changing. I tried to debug the code and realized that the values for the exit variable based on the previous selection is not cleared and the i_step = 2 is not being executed for the variable.
While I close and reopen the query, the code is working fine.
Does anyone know why this is happening? Please suggest..
Thanks in advance..
Regards,
Priya

Hi Binu,
Here is the code sample. I am trying to populate the month based on the input Week number '0I_WEKIN'
. For eg. If I give 37.2011, the month value should be 08.2011. If I give 39.2011, month should be 09.2011.
WHEN 'ZC_MONTH'.
    IF i_step = 2.     "after the popup
        READ TABLE i_t_var_range INTO lw_var_range WITH KEY vnam =
    '0I_WEKIN'.
       IF lw_var_range-high IS NOT INITIAL.
          l_week = lw_var_range-high.
          l_week = l_week - 3.
          CALL FUNCTION 'WEEK_GET_FIRST_DAY'
            EXPORTING
              week = l_week
            IMPORTING
              date = l_date.
          lw_range-low = l_date+0(6).
        ENDIF.
        lw_range-sign = 'I'.
        lw_range-opt = 'BT'.
        APPEND lw_range TO e_t_range.
    ENDIF.
Regards,
Priya

Executing customer exit variable in dropdown box. in WAD

hi Experts,
i have implemented two customer exit variables for current month and next síx months in a query and it is working well, and the code for customer exit variable is correct.
we have a requirement to use the customer exit variables in dropdown box in web application designer. in the dropdown box in web application designer i used command SET_SELECTION_STATE_SIMPLE in that 'command specific Parameters' i had given the exit variables current month and next six months.but after executing the web application designer and if i drill down the report with current month and next six months it's giving error message .
can anyone please tell me how to implement customer exit variables in web application designer through drop down box. i am using this in bi7 reports.
Regards
Sruthi Reddy

Hi,
Customer Exit Variable in SAP BI : is used to calculata MTD,YTD, and some other calculations.
You can define variables with Customer Exits and then write code in CMOD. See the Article/Blogs in the same
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
CHeck the Following Articles.
Customer Exit Variables in BW/BI Reports
Using Customer Exit Variables in BW or BI Reports Part - 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/using%20customer%20exit%20variables%20in%20bw%20or%20bi%20reports%20part%20-%201.pdf
How to use Customer Exit Variables in BW Reports: Part - 2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20use%20customer%20exit%20variables%20in%20bw%20reports%3a%20part%202.pdf
Using Customer Exit Variables in BW/BI Reports Part - 3
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10fc4382-afa6-2c10-1380-fa224fe4324f&overridelayout=true
Using Customer Exit Variables in BW/BI Reports: Part - 4
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0fefc77-40e3-2c10-8da3-d4bfcb013387?quicklink=index&overridelayout=true
Calculating the Ageing of the Materials
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/calculating%20the%20ageing%20of%20the%20materials.pdf
Thanks
Reddy

Looking for an ABAP-code for the customer-Exit Variable

Similar Messages

Maybe you are looking for