Looking for working example using javafx.builders.HttpRequestBuilder

Hi,
Is there any working example using javafx.builders.HttpRequestBuilder and javafx.io.http.HttpRequest to communicate with application server?
Thanks in advance.
LD

Similar Messages

Javacc and jjtree - looking for working example

Hi all,
I am doing a project that requires me to have an input of some java code. It is then run through a parser to tokenize it and it is then outputted into a grammar/syntax tree. My mentor has told me that I do not need to write this part (I will be doing work on tree once it is generated), and by the looks of it the parser can be 2-5k lines of code?
Anyway, I have been looking at the examples that come with javacc and jjtree, and have those working etc. My problem is that i need to combine the two examples and i cant see anyway of doing that as the examples are vastly different. (one is a java parser the other is a 'stupid program language' tree generator, so they are using different grammars?)
So my question is: is it possible to get a already made program that takes in java code and spits out a tree on the other end? If not what steps do i need to take to make this program :S
Thanks!
Scott.

Here is a visual example
http://www.bray.com/rollover.jpg
The big picture would represent area "A"
The smaller white outline box area "B"
And area "C" would be down below
Notice the thin white lines going from top to bottom and side
to side represtent the crosshairs and will move around within the
big picture as the mouse moves. Area "B" would remain centered on
these crosshairs and would show a fullsize image of the area
immediately around where the crosshairs are located. On a mouse
click would change area "C" to pull up some detail text, photos,
etc.
The large picture will actually be a map as opposed to a pure
photo as shown here, it was just easiest to grab a photo real quick
for this visual example. I borrowed this photo from
http://www.pezcyclingnews.com/
I hope they don't mind to much.

Looking for an example from app gallery that uses WAAD for identity

I'm looking for an example from the app gallery (http://azure.microsoft.com/en-us/gallery/active-directory/) that uses WAAD for identity. I need one the show our business what the process would look like for an organization signing up for a SaaS offering
via the App Gallery. I know all the Microsoft applications use WAAD but I was hoping to find a third-party example. What I mean is an app where all tenant and user identity is done using WAAD as opposed to federated identity.

I doubt that what you are looking for exists yet.
Cheers,
Markus
Markus Vilcinskas, Knowledge Engineer, Microsoft Corporation

Looking for an example for using CreateViewObject()

ADF 11g
Hello
In order to have a temporary vo for some internal processing
I'm looking for an example for using CreateViewObject()
If I understand things correctly it is used as follows :
ViewObject vo = am.createViewObject("MyVO", "package1.DeptView");
vo.executeQuery()
// do my processing here
vo.remove()Is this correct ?
Regards
Paul

Hi Paul,
Yes it is correct, you can find the sample code in [this post|http://radio.weblogs.com/0118231/stories/2003/01/17/usingViewObjectsInEntityObjectsForAnEfficientExistenceCheck.html] by steve muench(Search with createViewObject for quick referencing)
Sireesha

Looking for sample code using "first_tab" and "next_tab"

Looking for sample code using "first_tab" and "next_tab". How is it used with ItemID within a dialog box? I've read the reference books - don't understand it.

Hi Ray,
There are several ways to do this, and in the example I created, I actually did not end up using shift registers. I've attached some example code that basically multiplies the period by the duty cycle percentage to achieve the number of milliseconds to be high and low.
You would just need to insert your DIO code in each frame of the sequence structure.
Hope that helps. Kind regards,
-Sam F, DAQ Marketing Manager
Learn about measuring temperature
Learn how to take voltage measurements
Learn how to measure current
Attachments:
70_PWM_Example.vi ‏23 KB

Looking for pages designd using iWeb

hi and greetings from germany,
i'm looking for pages designd using iWeb to get an impression how it is working. I would like to build pages with text and i would like to know if it is possible to change or delete the placeholders for photos in the templates.
sorry - i can only use that english i learnd at school long ago ... ;-))

http://www.happyadam.com
The URL above points to my iWeb - spent a couple of hours with this over the weekend. It's quite flexible - takes a little getting used to (if you've used Pages then it's similar). There's not many templates but it's a good starting point.
The worst thing is the .Mac servers - they're very slow for hosting these iWebs as many others have found.
12 Powerbook G4 1.33GHz Mac OS X (10.4.4)

I'm looking for an example of Session Time Warning dialog

I'm looking for an example of a Session Timeout warning dialog to warn a user that their session is about to expire. I'd really like it to have the option to extend the session or logout.
I have a user submitted Webapp with several fields and an image upload. The image upload is for a copy of a professional state license. When the user gets to this field in the form, they realize that they have to scan their form first. They leave the Webapp Input form open, get their image uploaded finally, submit the form, then they get a message that they are no longer logged in. Any help would be greatly appreciated :)

If your doing work on the front end like this and you feel the form is to long or things like file upload takes too long then build a multi-step form process and have the image as one of the latter steps so you can start saving the data.

I am looking for labview examples related to ECG

Hi, everyone!
I need your help.
I am looking for labviews examples, which are related
to ECG for my thesis .
I wait for your answer.
thanks in advance

Burcu;
I am not sure what type of examples are you looking, so this is a start:
Searching at the LabVIEW Discussion forum I found:
Example
calculate heart rate from ECG
how to design a suitable vi to acquire ECG waveform?
Doing a search with Google:
LabView Exercise to model and analysis ECG/EKG data
EE 206 MINI-PROJECT I CARDIAC MONITOR VI
Searching an NI.com:
PC-Based ECG Monitoring and Analysis Using BioBench (LabVIEW VIs at bottom - not sure if link is dead)
Regards;
Enrique Vargas
www.visecurity.com
www.vartortech.com

Looking for an example VI that shows how to trigger an event in a VI from a subvi based on a value.

I am looking for an example VI that uses a typical event structure for the GUI, but also has an event that will trigger based on a boolean value changing in a subVI to that VI.
Thank you.

You need to Create User Event. Any Event structure which is registered with the event, whether it be in a subVI or otherwise can trigger the user event by using Generate User Event.
Right-click an event structure and select Show Dynamic Event Terminal. This is what you use to register your user (dynamic) events.
Search for "events" in NI examples within LabVIEW.

LabVIEW CLAD Certified looking for work in Southern California

Hey guys,
I'm a recent graduate from UCLA with a BS in Material Science and Engineering. I have been using LabVIEW for about a year now and got CLAD certified in June. I really enjoy working with the software and I have experience with some hardware (myDAQ). Looking for a position near Los Angeles but I'm pretty flexible.

Hello, I saw that you were looking for work in southern california. Here is a job posting for my company and I would be interested in meeting with you this week if you are still looking.
Thank you, Daniel Rust
Executive Establishment Officer
626-616-7717
[email protected]
Anaheim CA 92801
[email protected]
Job Title: Project Manager
Job Type: Permanent
Job Location: Anaheim CA
Main hardware expertise required: Compact DAQ/RIO (cDAQ,cRIO), Enclosures, Cabling, Other (please comment)
Main software expertise required: LabVIEW, LabVIEW Real-time (RT)
Job Description: LabVIEW programmer needed to program and update a series of technologies while using NI CompactRIO and Single Board RIO applications. Some basic networking and basic electronics experience required.
40 hrs/wk at our Orange County facility.
What qualifications and T&M certifications do you require? Technical, LabVIEW Certified Developer Prefered
Salary Offered: $60K-80K based on experience and qualifications
The attachment is a picture of the prototype ETU unit. The DBA of the company is "GreenLink Systems," our website is www.greenlinksystem.com

This is the thread for folks looking for work.

And unfortunately, as of next Friday, I will be in urgent need of work. I found out this week that my contract has been cut. :-( I have experience in help desk, technical training, IT management, systems administration, project management, and PBX administration.

This is the thread for folks to post in when they're looking for work. Let's use our professional networking contacts to help each other find jobs. Feel free to list open positions separately as well.
This topic first appeared in the Spiceworks Community

Looking for a examples of a podcast from a law enforcement agency

Hi, I am looking for podcast examples from a law enforcement agency. Any suggestions?

I doubt you'll find any through iTunes U which is pretty much all educational institutions, though someone might have posted something from a sociology and criminology program. You might try browsing the iTunes Store podcasts section:
Browse -> Podcasts -> Government & Organizations
I didn't go through the entire list, but I did see a podcast from the Center on Law and Security and one from Cop Talk Radio, so there might be podcasts of interest.
Regards.

Looking for a cheap used Mac

Greetings,
I'm looking for a cheap, used Mac to play around with iPhone app developement. How far back can I go hardware wise and still be able to install
Snow Leopard?
Thanks,
Patrick

You can install Snow Leopard on any Intel model as long as it has at least 1 GB of installed RAM.
Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.

Steps For Goods Receipt For Work Order Using Handling Units

Hello MM gurus,
I'm new to HU Management. Can you please share with me the steps for executing a "Goods Receipt For Work Order" using Handling Units?
I created a HU (1000000026), and then using transaction COWBHUWE I tried using that HU to create a goods receipt, but I keep getting the message below:
Handling unit 1000000026 is not provided for goods receipt
Message no. VHURM046
Do you have to assign/plan HUs to Process Orders first? I think the problem is that I'm not understanding the process or the requirements for a goods receipt for work order using HU.

Hello Manish Kumar,
I've been doing Handling Units testing in our sandbox environment and I've been trying to Pack a Finished Product for a Process Order using
1-Transaction code HU02 to create the Handling Unit
2-Transaction COWBHUE after creating the HU to enter the production order number and the HU number and propose it, but the it doesn't work. When I propose it, nothing happens.
3.-I also tried COWBPACK, but for some reason, when I go into COWBPACK, key in the Process Order, and then press enter, I get the following message:
You do not have authorization to create handling units for plant BP08
Message no. VHUPD500
Do you know how to solve this issue?

I am looking for an example ...

I am looking for an example that would show me a jsp page that retrieves/displays say 20 records at a time from a query which produced say 1000 records as a result. I mean being able to go to next page as well as previous page and display 20 records at a time.
Thanks for any help.

It's a little bit long, be patient...
<%@ page language="Java" import = "java.sql.*" %>
<jsp:useBean id="myBean" scope ="session" class="bean.DataConnectionBean" />
<html>
<body bgcolor="#CCFFFF">
<%
String sql; //SQL string
int rowPerPage=10; //Record size of one page
int rowTotal; //Total records
int pageTotal; //Total pages
int pageIndex; //Pages waiting for display, from 1
pageIndex = Integer.parseInt( request.getParameter("page") );
rowTotal=Integer.parseInt( request.getParameter("rowTotal") );
String sql_2=request.getParameter("sql_2");
String sql_1= "select " +
"vin, " +
"ga_no, " +
"ga_build_date, " +
"deliver_date, " +
"model, " +
"year_code, " +
"engine_no, " +
"initial_mileage " +
"from vehiclemaster " +
"where ";
sql=sql_1+sql_2;
myBean.connect();
ResultSet rs=myBean.executeQuery(sql);
pageTotal = (rowTotal+rowPerPage-1) / rowPerPage; // Get total pages
if(pageIndex>pageTotal) pageIndex = pageTotal;
%>
<table border="0" cellpadding="2" cellspacing="0">
<tr>
<td align="left">
<div align="left">Total <%=rowTotal%> Records</div>
</td>
</tr>
</table>
<table border="0" width="844">
<tr bgcolor="#669966">
<th>VIN</th>
<th>GA#</th>
<th>build date</th>
<th>deliver date</th>
<th>model</th>
<th>model year code</th>
<th>engine#</th>
<th>initial mileage</th>
</tr>
<%
int absolute=(pageIndex-1) * rowPerPage;
for(int k=0; k<absolute; k++) rs.next();
int i = 0;
String LineColor;
while( rs.next() && i<rowPerPage && (absolute+i)<rowTotal ){
String col1=( ( ( col1=rs.getString(1) ) == null || rs.wasNull() ) ? "" : col1 );
String col2=( ( ( col2=rs.getString(2) ) == null || rs.wasNull() ) ? "" : col2 );
String col3=( ( ( col3=rs.getString(3) ) == null || rs.wasNull() ) ? "" : col3 );
String col4=( ( ( col4=rs.getString(4) ) == null || rs.wasNull() ) ? "" : col4 );
String col5=( ( ( col5=rs.getString(5) ) == null || rs.wasNull() ) ? "" : col5 );
String col6=( ( ( col6=rs.getString(6) ) == null || rs.wasNull() ) ? "" : col6 );
String col7=( ( ( col7=rs.getString(7) ) == null || rs.wasNull() ) ? "" : col7 );
String col8=( ( ( col8=rs.getString(8) ) == null || rs.wasNull() ) ? "" : col8 );
if (i % 2 == 0) LineColor="#DBECFD";
else LineColor="#C6E1FD";
%>
<TR bgcolor="<%= LineColor %>">
<TD><%=col1%></TD>
<TD><%=col2%></TD>
<TD><%=col3%></TD>
<TD><%=col4%></TD>
<TD><%=col5%></TD>
<TD><%=col6%></TD>
<TD><%=col7%></TD>
<TD><%=col8%></TD>
</TR>
<%i++;
}%>
</table>
<div align="center">
<table border="0" align="left">
<tr>
<td align="left">
<div align="left">Page <%=pageIndex%> / <%=pageTotal%>
<%if(pageIndex<pageTotal){%>
<a href="QueryVehicleResult.jsp?sql_2=<%=sql_2%>&rowTotal=<%=rowTotal%>&page=<%=pageIndex+1%>"><img src="images/next.gif" border="0">
</a>
<%}%>
<%if(pageIndex>1){%>
<a href="QueryVehicleResult.jsp?sql_2=<%=sql_2%>&rowTotal=<%=rowTotal%>&page=<%=pageIndex-1%>"><img src="images/prev.gif" border="0">
</a>
<%}%>
</div>
</td>
</tr>
</table>
</div>
<meta http-equiv="Content-Type" content="text/html; charset=gb2312">
</body>
</html>
<%
rs.close();
myBean.close();
%>

Looking for working example using javafx.builders.HttpRequestBuilder

Similar Messages

Maybe you are looking for