Loop Gateway and Branch

Hi,
In a process, I designed a loop. In this loop, there is a gateway with two branches.
I would like to know if each branch share the same instance of process variables.
I m' not sure to be clear.
Thanks

Ok but if a branch A use a form variable for example and is not yet completed but the branch B is completed in the first turn of the loop.
The second begin and the branch A will take the same form variable that previously so there is an issue no ?
Thanks for your help

Similar Messages

Index in LOOP and BRANCH in Business Connector

Hello,
i use the SAP Business Conector 4.7 and want to map a structure from incoming XML-File to BAPI_PO_CREATE1. I loop over /ORDER[0]/ORDER/ORDER_ITEM_LIST/ORDER_ITEM/ACCOUNTING_INFO/COST_CATEGORY_ID
and BRANCH over
/ORDER[0]/ORDER/ORDER_ITEM_LIST/ORDER_ITEM/ACCOUNTING_INFO/COST_CATEGORY_ID/*body
But ORDER_ITEM has an index 0,1,2,3 on so on. So it works only, if i BRANCH over
/ORDER[0]/ORDER/ORDER_ITEM_LIST/ORDER_ITEM[0]/ACCOUNTING_INFO/COST_CATEGORY_ID/*body
for every index. But the index could change with every file.
How can i BRANCH over an index?
Thanks,
Daniel

LOOP AT itab.
AT NEW stud.
perform xxxx.
ENDAT.
ENDLOOP.
Refer SF
Refer this link for Smartforms
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d937ec90-0201-0010-0ca8-b6cb3b6dd1ef
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b590fd97-0301-0010-db90-d09ff93cee5a
Subroutine in smartform
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
Style and mailing the Smartform output
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
Table,Template,Loop and Command in Smartform
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985

Federation gateway and ISP Change

Hello...we have a federation gateway connection..through it we look up free / busy information between our two branch offices...exchange 2010 on both sides...one branch will be changing ISPs which means new external IP addresses...what affect
will this have on our connection to our branch office through the gateway and what steps may need to be taken to make sure our Free Busy information with exchange will continue to function.
Thanking you in advance for your help,

Hi,
Creating a text (TXT) record is to provide proof of ownership of the registered Internet domain. Will they change the domain name?
Thanks,
Simon Wu
TechNet Community Support

CVP: using the Gatekeeper and the SIP Proxy, why? VXML gateway and the ingress gateway communication?

Hi All;
I am actually keep asking with my self, why to use gatekeeper or SIP proxy when deploying the CVP solution, why not to use the Call Manager? Is it because that the concept built on SIP and H323 so call manager can not handle these kind of operations as call manager is supporting MGCP?
From the other side, what kind of trunk or protocol of communication method is used between the ingress gateway and the VXML browser?
Any advise?
Regards
Bilal

The main reason is not all who deployed ISN/CVP in the past use Call Manager as the PBX.
CVP is a powerful solution that covers many deployment scenarios. Its ability to integrate with legacy switches has been very important in the past, and although as we move forward, these types of deployments will probably become fewer, the independence of CVP on Call Manager remains a cornerstone of the design.
I'm glad it was built that way. Look at some of the other deployment models (like Call Director) in the CVP Guide.
It's not because Call Manager supports MGCP - you don't need to have any MGCP gateways in your Call Manager deployment. You could have all H.323 gateways and manage the dial plan on the gateways with a gatekeeper. Or use SIP.
The ingress gateway does not talk to the VXML server - the VXML gateway does.
In a branch office design, these are one and the same; but that's not the fundamental architecture. The IOS on the VXML gateway runs a voice browser (I guess you could call this a VXML browser). It uses HTTP to send and receive information (VXML documents) from the VXML server - whether this be the CVP Call Server or an external VXML server (like what was brought in-house with the Audium acqusition - the Cisco CVP VXML Server).
Regards,
Geoff

Analog interface between voice gateway and pbx system, please suggest too

Hi
Im a fresh in telephony and voip technology. I didnt find information about design analog interface between voice gateway and pbx system such as fxo-to-fxo, fxo-to-fxs, fxs-to-fxs, fxo-to-e&m, fxs-to-e&m, or e&m-to-e&m. Could you please suggest any resource for me?
Ps. my networks have 1 HQ and 2 branch offices connect to the HQ.
Thanks,
Nitass

Hello,
you can find lots of info about analog voice interfaces here:
http://www.cisco.com/en/US/tech/tk652/tk653/tk754/tech_protocol_home.html
I've found this particular document very useful when trying to understand how telephone signaling works. This applies to any telephone system where interfacing to analog phones or the PSTN is involved.
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800a6210.shtml
Regards.

3rd Party AIFF loops tempo changes from loop library and Logic session

Hi there,
Hope somebody out there can help me out!
I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
Has anyone else had this problem, or have any idea as to what the issue may be??
Any help would be greatly appreciated!!
- Aaron

Hi there,
Hope somebody out there can help me out!
I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
Has anyone else had this problem, or have any idea as to what the issue may be??
Any help would be greatly appreciated!!
- Aaron

Editing Loop Start and End times via automation / MIDI controllers?

I'm trying to play a sample in EXS24 and have the Sample Start, Loop Start and End times manipulated over the course of the song. I've tried to open up the EXS sample editor, click on the numerical value of the Loop Start, and then attempt to Learn Automation. All it does is assign the knob for the instrument Volume Level. Is there any way to do this? It's basically how an Akai S612 works: http://www.vintagesynth.com/akai/s612.shtml
I switched gears and tried it also with Battery, and there's a way to map the Start and End times in there, but it's not seeming to work as I've intended. I can't seem to make the loops move as they should and there's ways to use up to 4 loops, but not a way to target each loop's start and end points via separate controllers.
I could use my S-612 [and probably will], but in moments where I don't have one available, I'd love to find a solution to this.
Thanks,
+odd

Anyone with any thoughts? would be great to solve this.

HT1339 I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?

I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?

Try doing a level reformat of the iPod's flash storage instead to see if that kills the restore loop using the instructions in the article below.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock

Is there a way on logic studio to laterally link songs for live settings. I never switched to ableton as my tracks are not as loop based and am trying to figure out a way to create a stream of linked songs without blowing out my cpu- maybe logic studio?

i think my question is in the header but i have this dream of taking a string of tracks(songs) and having them synched in a way that I can bring in a kick of one while my synth line from the last is still running- like spinning records but this sounds like a dream because that means two songs would have to be up at once and not only that but timed to be playing at once (all tracks connected to external controllers too) and the CPU would be crazy. This idea would be for the developers to figure out a way to create a system that allows the host song to fade out as the new one comes in in terms of power and their would have to be a new interface that would link the two. i am an electronic dance music producer and some songs are 8 minutes long with some of the tracks as composition piano styles that is hard to loop up and put inside a system like ableton to trigger and the accompanying string lines that are timed against the pianos so was just looking for a way to embed from track to track... any thoughts out there- i am now switching over to studio from pro for 4 years so maybe it's already done but for some reason - i think not. Hope my question is not too silly for the serious pro's out there.
Also, maybe logic should have an appendage platform to each individual track that has a pop and play interface to it that allows people to easily trigger and play each song live. Each song has a live version that has a brighter easier platform to see at night shows and it is still embedded within the original track-- then these appendage live songs can then be linked together. This appendage could be called LOGIC LIVE tracks.

I almost forgot that using folders can allow each folder to contain a song. I also recall touch tracks or one key play...

What's going on with Project "Gateway" and Sybase?

I've just returned from Teched in Berlin where I followed mostly the mobile track of sessions.
I've come away alternately energised and confused. Each topic in its own right is clear, but piecing allthe components together is a different matter.
Has anyone got opinions on the future role of project Gateway? I saw many sessions by Sybase on the SUP and only one which mentioned Gateway. Gateway didn't feature in the mobile strategy slides. However, I have seen material mentioning the future tie-up of the two. If this should happen, then how might they interact? And what future for the co-innovation platform? Can we draw any conclusions on this yet?
The instant value mobile apps session CD161 seems to build on top of the SAP Data Protocol (SDP), but thinking back, they didn't mention Gateway in there at all. And the co-innovation platform session was silent on both Gateway and SDP
So does "Instant Value" equal "Project Gateway"? It can't be since the Sybase guys talk a lot about Instant Value. Are there two interpretations of this term within the organisation?
Just hoping to kick off a general discussion on this subject. All opinions and replies welcome. Especially from insiders...
Alex.

Hi Steffan - good point. I kind of assumed that LMS is another term for Project Gateway... They seem to be addressing the same problem, and the architecture diagrams look qualitatively similar. The CD121 Sybase slides also talk about the "SAP Mobile Connector", which might be yet another name for the same thing. I think you would know better than me since you've already built that thing you showed at the Demo Jam - what data consumption technology was your demo-ed app using?
I get the impression that there have been a number of independent development streams within SAP which are only now being brought together. This manifests itself to us as mixed or incomplete messages. It's easy to see how at a teched, each group might be responsible for getting its own message out and not necessarily integrating into the overall message of the mobile strategy.
So essentially there are two categories of mobile app inthe SAP vision:
1. Instant Value and
2. Mission Critical.
Then there are various methods of consuming SAP backend data from our mobile apps:-
1. Netweaver mobile DOE (via co-innovation platform?)
2. LMS
3. Project Gateway
4. Web services
5. BAPIs (via JCA)
(This is five methods, not four, which is another reason why I thought LMS and Gateway were the same thing).
Then on top (or underneath?) of all this, you have to make a call on whether to make use of the SUP middleware and/or a security product like Afaria.
So perhaps the most likely combinations look like:-
Mission Critical apps with SUP ( + Afaria ) + DOE/Gateway
or
Instant Value apps with (LMS/Gateway or simply Web services/JCA)
But if you have a LOT of Instant-value apps to build I guess your landscape could become complicated enough to justify the middleware too.
Now please someone point out the flaws in this summary!
Alex.
Edited by: ajfear on Oct 20, 2010 6:44 PM

Publish RD Gateway and Web Access with One-Time Password (OTP) / Two-factor Authentication WITHOUT ISA/TMG server

Hi everybody,
I've been struggeling with this problem for a few weeks now and can't find a way to solve it.
We have an RD farm (Server 2012) which consists of two Remote Desktop Servers with Connection Broker and Web Access.
I've recently published a new server, containing RD Gateway and Web Access in our perimeter network.
Now we've got restrictions that OTP/2FA must be used for the external deployment and we've decided to go for a solution from Gemalto.
The "program" is called IDConfim and the server is called SA Server (Strong Authentication).
Also it's important that NO ISA/TMG server is supposed to be used, the OTP/2FA is supposed to work seamless with the Web Access/Gateway.
After hours discuss we came to a point were their NPS agent setup would be the only way to accomplish our goals.
The setup is supposed to be like this:
LAN:
1 DC (2008 R2)
RD Farm (2012)
1 SA Server (2012)
DMZ:
RD Gateway/Web Access (2012)
Were Gateway and Web Access should forward the authentications with NPS to the NPS agent on the SA server.
When you print your AD account to authenticate you add the 6 digits of OTP which you recieve from you mobile app.
Initially this seems to work, the Gateway forwards the request to the remote NPS server, BUT only if you write the correct AD password
(without the OTP extension).
If you write the correct AD password the authentication is forwarded to out SA Servern and it's beeing rejeced because the password doesn't
contain the correct OTP extension.
The problem comes here.
When you write you AD password along with the OTP extension you get a Windows Security error in the eventlog (On thw Gateway server) like this:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: user
Account Domain: domain
Failure Information:
Failure Reason: Unknown username or password.
Status: 0xc000006d
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: server
Source Network Address: 192.168.x.x
Source Port: 63003
Detailed Authentication Information:
Logon Process: NtLmSsp
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
What i can see it's a NTLM error, but hey?! aren't we supposed to forward all authentication handeling to the remote NPS server?
The problem is that no matter what i try the above problem stays there.
Is it not possible to just forward ALL authentication handeling to a remote server?
The only solution I've found to get it working someday in the future is this:
"Remote Desktop Pluggable Authentication and Authorization", which is supposed to be introduced in 2012 R2.
Also this link describes it:
http://archive.msdn.microsoft.com/Release/ProjectReleases.aspx?ProjectName=rdsdev&ReleaseId=3745
Please, bring me some answers before my head explodes! :)
PS, long question = maybe some errors, ask me if something is unclear.

Hi,
Based on our experience, if the NTLM error occurs, please check the password.
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I have been sampling new imported drum loops. And if I adjust region to song or time strecth it updates the audio file in the library. How to stop this? I lost the original setting to one loop. automatically doing it ??

I have been sampling new imported drum loops. And if I adjust region to song or time strecth it updates the audio file in the library. How to stop this? I lost the original setting to one loop. automatically doing it ??

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Remote Desktop Gateway and WebAccess Deployment - Multiple Logon Prompts

I'm having a few issues with some multiple logon prompts using "Connect to a remote PC" via RD Web Access.
I am able to log onto the RDWeb without a problem.
Essentially once I make a connection to my end-device I first receive a logon prompt, I'm authenticated, then I'm asked again for another logon prompt. Any ideas how to resolve this?
My layout is simple:
1 VM in the DMZ that has the Remote Desktop Gateway and Remote Desktop Web Access roles installed. No connection broker, or session host.
With my deployment I have a wildcard certificate bound to the Remote Desktop Gateway and it is bound properly in IIS. Remote Desktop functionality through the RDGateway works just fine. However, the only nuisance is that I get prompted multiple times for
credentials when accessing the end-device regardless if my connection is from a domain-joined machine or a non-domain joined machine.
I've tried using Web Single Sign On via http://anandthearchitect.com/2014/01/20/rds-2012-r2single-sign-on-using-windows-authentication-for-rdweb-page/ and it still does not work.
Any ideas?
Thanks,
Dan

Hi Dan,
How many prompts are you seeing? Expected behavior for Connect to a remote PC would be this:
1. Log on to RDWeb
2. Select Connect to a remote PC tab
3. Enter server name in Connect to box, click Connect
4. Unknown publisher warning, click Connect
5. Credentials prompt, it should say These credentials will be used to connect to the following computers: 1. rdgw.domain.com (RD Gateway server) 2. remote.domain.com (remote computer)
6. After entering credentials and clicking OK it should log you in to the remote computer. This assumes that the destination is authenticated properly (usually via certificate) and the credentials are valid for both the RDG and the remote
computer. Normally in a domain environment the same credentials (domain\username) would be valid for the RDG and the remote server.
-TP

Setting up gateway and firewall in OS X Server 10.3?

Hi all,
I have a G4 tower with two working ethernet cards in it that I would like to configure as a gateway and firewall. It has OS X Server 10.3 on it. I have easily found the firewall configuration in the Server Admin intrerface, but I can find nothing about configuring the server to act as a gateway. The only information I have found that is pertinent is related to the Gateway Setup Assistant that comes with OS X Server 10.4, which doesn't exaclty help me. Does anyone have any documentation on configuring OS X Server 10.3 to be a gateway? Thanks.

Actually, I may have marked this as answered too quickly...
So I followed the guide at the back of the getting started manual, and set everything up as follows:
- PCI ethernet card is set up as the connection to the outside world. It is plugged into a switch which connects to a wall jack. In Network under System Preferences, it is set up as the first internet conection to try. It has a static IP address, and is set up to use the organization's DNS servers. It is NOT plugged into the upstream port, but is instead in port #9. The light on the router is on.
- Built-in wireless is set up to be the internal connection. It is plugged into the upstream slot on anouther switch. It has a static IP address, and is set up to use the organization's DNS servers. The light on the router is on, so it appears there is a connection.
- A different computer is plugged into the second switch, which a static IP address and to use the organization's DNS servers.
So basically, unlike in the scenario in the manual, I am not using the OS X Server for DNS, DHCP or NAT services. That should, if anything, simplify it.
The firewall service is started, and is set to allow all traffic in and out, no problems. Nice and simple to start.
The server has an okay connection to the outside world via the PCI ethernet card. I can ping other machines and load web pages. I cannot, however, access the machine connected to the router which is connected to the built-in ethernet. Likewise, that machine has no access to either the OS X Server or the outsideworld.
How does OS X Server decide which ethernet card is to be connected to the outside world, and which is for the internal firewall? Is the confusion possible because I'm connected to two routers?

IPhone: Using embedded QT movies that either Loop or Loop Back and Forth

Hi to everyone,
I'm working on a very simple iPhone app:
it has several buttons that launch different QuickTime movies embedded in the application, that will either Loop or Loop Back and Forth.
The desired looping behaviour is already set within QuickTime itself (those settings are available in QuickTime's View menu).
So far it doesn't seem to work, as the iPhone's SDK doesn't seem to recognize these QuickTime settings of Loop or Loop Back and Forth.
I've been trying to find advanced documentation on the matter, with no luck.
Does anyone knows if it's possible to create an iPhone application that has embedded QuickTime movies that either Loop or Loop Back and Forth?
If it is possible to do so, can you please post some code (or links) explaining how to proceed?
If the feature is not currently supported, does anyone knows if it will eventually be supported by Apple (maybe in a future SDK revision)?
While I don't know the entire context the SDK engineering team has to contend with, it seems to me it should be rather simple for Apple's iPhone SDK to simply accept the settings already put in place inside a QuickTime movie.
Many thanks in advance for any feedback on this!

Well, my programmers have come back to me and the news is not good.
The QTMovieLoopsAttribute is not supported in the SDK's QT Kit.
I'll now call it SDK's *QuickTime Kit Lite*, if you don't mind.
*QuickTime Kit Lite*, the key audio/video toolbox available for development of applications on the iPhone through the SDK, provides a single option:
a Play / Stop button.
The only other thing available (I think) is the option to hide the play/stop controller. That's it.
Apparently, there are several unofficial, private frameworks that give access to lower-level QuickTime functions and that may provide a way to actually loop videos, but chances are that an app using these unofficial frameworks would get rejected by Apple upon submission for the store.
I'm still waiting for more info and the final word from my programmers, but from the looks of it, this is going to be a show-stopper shortcoming of QT Kit Lite, as far as my project is concerned.
I'm probably going to have to fold my project and wait (hope) for an eventual upgrade to the SDK's QT Kit.
By the way, does anyone knows if there is a way to communicate with Apple and request new features for inclusion in future revisions of the SDK?
Upgrading the QuickTime Kit librairies to include the video Loop and Loop Back and Forth Attributes would be my first (and only) request.
many thanks to all!

Loop Gateway and Branch

Similar Messages

Maybe you are looking for