Loop through table in XI

Hi Guys,
I have scenario where i call a BAPI and get return parameter as a table. I want to loop through this table in XI/BPM. Can i get some help on how to loop thorugh table in XI?

Hi yashpal,
Bloack Step in a BPM is used to process a sequence of steps repeatedly for different information.
The block step can be processed using FOR EACH and PAR FOR EACH. For each will process the info one after the other and PAR FOR EACH will do it in parallel.
For more info on the Block Step Type in particular and the BPM in XI , check these links,
http://help.sap.com/saphelp_nw04/helpdata/en/f6/e1283f2bbad036e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
Hope this helps,
Regards,
Bhavesh

Similar Messages

How do I loop through tables, not columns in a table?

Sorry if this is a long one. My problem is actually quite simple. I am trying to write either an ad hoc PL/SQL block or a stored procedure to loop 18 times (thru 18 tables) and perform a SQL query on those tables, returning 18 resultsets. I would like the results to show up on the screen (or in a spool file, whatever).
So far I have tried 3 different approaches, none of which have worked.
1. I tried to assign the select query to a variable (qry) and use EXECUTE IMMEDIATE qry. This forced me thru a variety of errors to declare variables and assign the result to them--EXECUTE IMMEDIATE qry into nm0, nm1, nm2...
The problem with that was the resultset returned more than the variable was built for as there might be no rows returned, or it might be a thousand rows of data. So I tried changing the variables to VARRAYS, but it gave me a type mismatch as the underlying columns were NUMBER and VARCHAR2.
DECLARE
     ctr number;
     TYPE NUMLIST IS VARRAY (1000) OF NUMBER;
     TYPE VARLIST IS VARRAY (1000) OF VARCHAR2(15);
     nm0 NUMLIST NOT NULL DEFAULT 1;
     nm1 VARLIST;
     nm2 NUMLIST NOT NULL DEFAULT 1;
     nm3 VARLIST;
     nm17 NUMLIST NOT NULL DEFAULT 1;
     qry VARCHAR2(2000) := 'klx_uln_p000_cells';
BEGIN
FOR ctr IN 1..17 LOOP
     IF ctr < 10 THEN
          qry := 'SELECT
          A.DIM_0_INDEX,
          S0.SYM_NAME,
          A.DIM_1_INDEX,
          S1.SYM_NAME,
          A.DIM_2_INDEX,
          S2.SYM_NAME,
          A.DIM_3_INDEX,
          S3.SYM_NAME,
          A.NUMERIC_VALUE,
          B.NUMERIC_VALUE
          FROM
          KHALIX.klx_uln_p00'||ctr||'_cells A,
          KHALIX.klx_ucn_p00'||ctr||'_cells B,
          KHALIX.KLX_MASTER_SYMBOL S0,
          KHALIX.KLX_MASTER_SYMBOL S1,
          KHALIX.KLX_MASTER_SYMBOL S7
          WHERE
          A.DIM_0_INDEX=B.DIM_0_INDEX AND
          A.DIM_1_INDEX=B.DIM_1_INDEX AND...
          A.DIM_7_INDEX=S7.SYM_INDEX';
     ELSE
          qry := 'SELECT
          A.DIM_0_INDEX...
          A.DIM_7_INDEX=S7.SYM_INDEX';
     END IF;
     BEGIN
     dbms_output.put_line('SELECT FOR KLX_ULN_P00'||ctr||'_CELLS');
     dbms_output.put_line(nm16);
     dbms_output.put_line(nm17);
     EXECUTE IMMEDIATE qry into nm0,nm1,nm2,nm3,nm4,nm5,nm6,nm7,nm8,nm9,nm10,nm11,nm12,nm13,nm14,nm15,nm16,nm17;
--     dbms_output.put_line(qry);
     dbms_output.put_line(nm16);
     dbms_output.put_line(nm17);
     EXCEPTION
          WHEN NO_DATA_FOUND THEN
               dbms_output.put_line('No data found for Query '||ctr);
     END;
END LOOP;
EXCEPTION
     WHEN NO_DATA_FOUND THEN
          dbms_output.put_line('No data found for Query '||ctr);
END;
2. So then I used REF CURSOR to create a stored procedure and return the values. That allowed me to run my query AND tokenize the tablenames with a counter so that it would loop through the different tables! However, I still could not get it to display the results without going to SQL Plus and typing 'print c;'.
3. So, finally I tried to create a looping wrapper around the ref cursor to have some variable (ctr) increment so my query would get performed on table0_cells through table17_cells. This, too, did not work.
If I manually go to SQL Plus and type:
variable ctr number
begin
:ctr := 1;
end;
exec dupe_find(1,:c);
it will execute for the first table (klx_uln_p001_cells) and I can then type 'print c' to see what was returned. But when I try putting this within a wrapper PL/SQL block with a Loop to make ctr go from 0 - 17 (to loop through table_names klx_uln_p000_cells to klx_uln_p017_cells), it does not work.
Help! It should be very simple to loop through tables, shouldn't it? I just want a script that will loop through tables, perform a query on each table and display the results. For some reason, I can only find documentation examples on looping through columns that are all in the same table.
Dave

Here's a working example using your first strategy ...
create table t1 (id number);
create table t2 (id number);
insert into t1 values (100);
insert into t1 values (101);
insert into t2 values (200);
insert into t2 values (201);
declare
v_table_name user_tables.table_name%type;
type ttab_id is table of t1.id%type index by binary_integer;
tab_id ttab_id;
begin
for i in 1 .. 2 loop
v_table_name := 't' || i;
execute immediate 'select id from ' || v_table_name
bulk collect into tab_id;
dbms_output.put_line('query from ' || v_table_name);
for j in 1 .. tab_id.count loop
dbms_output.put_line(tab_id(j));
end loop;
end loop;
end;
There are many other ways to do this (especially if you need to do more than just print out the data).
Richard

Loop through tables based on data dict values

Hi,
I working on an old v7.3.4 database that I'm not familiar with and I want to loop through the tables and count the occurrence of a field value based on table names i've retrieved from the data dictionary. None of the tables have relational keys defined.
In a cursor I can loop thru all_tab_columns and load variables with the table, column names, and the datatype, but then I want to use these values in a second nested cursor to loop through each table found by the first cursor.
When I do :
Select var_colname from var_tabname
i get
The following error has occurred:
ORA-06550: line 23, column 10:
PLS-00356: 'V_TABNAME' must name a table to which the user has access
ORA-06550: line 22, column 5:
PL/SQL: SQL Statement ignored
ORA-06550: line 22, column 12:
PLS-00320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 27, column 7:
PL/SQL: SQL Statement ignored
so it would seem I can't use a variable to substitute the table name in the 'from' clause. Does anyone know of a way round this ?
Thanks in advance

Hi,
You will have to use dynamic sql to create your second cursor.
DECLARE
     v_sql_query VARCHAR2(400);
     TYPE cur_typ IS REF CURSOR;
     c1 cur_typ;
     mYRec MyTable%rowtype;
BEGIN
     v_sql_query := 'select * from MyTable';
     OPEN c1 FOR v_sql_query;
          LOOP
          FETCH c1 INTO mYRec;
               EXIT WHEN c1%NOTFOUND;
               EXIT WHEN c1%NOTFOUND IS NULL;
/*processing here*/
          END LOOP;
     CLOSE c1;
END;
Regards

Loop through table's rows

Hi folks,
I have a table with multiple rows which each one of them contains one dropdown list.
In my code I want to loop through this table rows and check each dropdown list's selected-item.
How can I do this in code(JavaScript).
Thank you,
Yair

Check this thread,
it has solutions for JavaScript ind FormCalc.
http://forums.adobe.com/message/3345384#3345384

Loop through table(table is created dynamically)

Hi all,
I have a table that is created dynamically.It has got 3 columns and 8 rows.In first row - first column,I have a value that is set dynamically.Now, How can I loop through this table and get this value?
The table context node and value attributes are also created dynamically.
Table node is "TimesheetData" and value attribute is col1.Value,col1.Value and col3.Value
TimesheetData
col1.Value
col2.Value
col3.Value
Again.... this node and attributes are not there in my view context by default, its getting created and binded dynamically here.
Thanks Kukku

Hi,
Following is the code to iterate through the elements
//Table node is "TimesheetData" and value attribute is col1.Value,col1.Value and col3.Value
for(int x=0;x<wdContext.getChildNode("TimesheetData",0).size(); x++)
            IWDNodeElement nodeElement = wdContext.nodeTimesheetData().getElementAt(x);
            String value1 = (String) nodeElement.getAttributeValue("col1");
            String value2 = (String) nodeElement.getAttributeValue("col2");
            String value3 = (String) nodeElement.getAttributeValue("col3");
Regards
Ayyapparaj

Loop through table

is it possible to loop through the xml table in the report?
i use xml as datasource. can i create my own function to find the specified value i need.
how to create sql expression in cr4e?
thanks,

Note that SQL and XML are incompatible considerations.
You sound as if you're looking for data pre-/post- processing, which CR4E is not designed to do. It'll filter data, link disparate recordsets, but looping across XML isn't something it's specifically designed to do.
If you can give some indication of what your ultimate task is, then there may be more options.
Sincerely,
Ted Ueda

Question about Looping through tables in Adobe Form

Hello,
We have an adobe form which is to be filled offline. It consists of a table. Table can have repeating rows and user can add\remove rows as they wish. The cardinality of the context node where we need to bind this table data is set to 1n
We want to know the process to get all the values in the table back into our context node once the form is uploaded. I assume we need to loop through the table, and add elements to the context node. Can someone please let us know if were on the right track, and provide some sample code if possible?
<b>We cant figure out a way to loop through a table inside an Adobe form.</b>
We are using Web Dynpro Java with Adobe Livecycle Designer 7.1
Your help is much appreciated.
Thanks,
Rob.

Try using...
for (z = 0; z < 16; z++) {
this["cb"+z].setStyle("styleName", "cssCBstyle");
That is the way to target them. I haven't dealt with setting styles, so I can't answer for that aspect working or not.

Looping through table in ADOBE TABLE...HOW?

Hi,
I'm having a problem with writing scripts on looping through a dynamic table in adobe and disabling certain cell in the table.
can some one write me the script to help me out...please.... here is my email add. [email protected]
Regards,
Vinod

Hi Denise
You can use tableView for this which is available in htmlb.
There is a attribute in tableView called visibleRowCount.
The integer value that u give for this attribute , only that number of rows will be visible on your BSP page.
This is the sample code :
      <htmlb:tableView id              = "tb1"
                       headerText      = "Communication"
                       headerVisible   = "true"
                       design          = "alternating"
                       visibleRowCount = "4"
                       fillUpEmptyRows = "true"
                       table           = "<%= itab %>" >
                <htmlb:tableViewColumn
                 columnName     = "CURRENT_STATE"
                 title          = "CURRENT STATE"
                 edit           = "TRUE" />
.                     </htmlb:tableView>
Here tableview id and table is mandotory field.
Give as many tableViewColumn as u have column in your internal table ( Here CURRENT_STATE is the name of the Column that I have in my internal table).
Here visibleRowCount is 5, so only 5 rows will be visible at a time .For other entries u have to click on
my click handler which is like a footer in a tableView, and next 5 entries will become visible and like that.
Before implementing this, fill your internal table
in OnCreate in Flow logic ( in do_init in case of MVC).

Loop through table (beginner question)

Hello,
I been reading and reading but can´t seem to do what I want to do.
I do a lot of forms in Livecycle but can´t seem to understand even the most easy loop.
Lets say I have a table with two columns and ten rows. Textfields in column A is called Cell1 and in column B Cell2.
I want to look through all the rows for this:
If(Cell1.rawValue !== null)
Cell2.fontColor = "255,0,0";
else
Cell2.fontColor = "0,0,0";
If anyone can help me with this I would be very happy. Mayvbe I can start to understand this since it seems like I´m missing out on some very handy functions,.
/ Anders
Sweden

Thank you so much
And if I would like to limit the loop I write as follows?
for (var a=0;a<10;a++){
if (Row.item(a).Cell1.rawValue!==null)
    Row.item(a).Cell2.fontColor = "255,0,0";
else
Row.item(a).Cell2.fontColor = "0,0,0"; }
Thanks again.
/ Anders
Sweden

BRF : Looping through a table (e.g. Do Until or While, etc..)

Hello Colleagues,
In BRFPLus I understand we can create Loop Expressions that allow you to loop through a table and perform different Actions based on the retrieved contents of the table.
We are not using BRFPLus (but the old BRF instead). Does anyone know how to build Loop Expressions in BRF without the use of ABAP Function Modules?
Your feedback would be really appreciated.
Thanks in advance.
Regards,
Ivor M.

Hello Colleagues,
In BRFPLus I understand we can create Loop Expressions that allow you to loop through a table and perform different Actions based on the retrieved contents of the table.
We are not using BRFPLus (but the old BRF instead). Does anyone know how to build Loop Expressions in BRF without the use of ABAP Function Modules?
Your feedback would be really appreciated.
Thanks in advance.
Regards,
Ivor M.

Looping through a table

how do I loop through the following table and get it to insert records into another depending on the number that it finds in the value column. eg if there is 8 in the value column, 8 records should be inserted into another table with the same ID
i forgot to paste an example table
ID
Name
Value
1
john
12
2
sarah
20
3
Tom
5
I want it to look at the value column and if it is 12 it should add 12 rows with the same ID into another table. eg in the new table there will be 12 rows for John with an ID of 1. For Sarah there will be 20 rows with an ID of 2.
sukai

Sure!
DECLARE @sourceTable TABLE (ID INT, Name VARCHAR(20), Value INT)
INSERT INTO @sourceTable (ID, Name, Value) VALUES (1, 'john', 12),(2, 'sarah', 20),(3, 'Tom', 5)
This mocks up your source table (where your data is coming from). We're simply creating a table variable, and populating it with your example data.
DECLARE @numbers TABLE (value INT)
WHILE (SELECT COUNT(*) FROM @numbers) < (SELECT MAX(Value) FROM @sourceTable)
BEGIN
INSERT INTO @numbers (value) VALUES ((SELECT COUNT(*) FROM @numbers)+1)
END
This creates an example numbers table. The while causes the code to loop until there are as many rows as the maximum value for the Value column in your example data. Each time the loop iterates it inserts a row, causing the COUNT(*) to be one more each time,
we add one to that, and insert it into the numbers table.
INSERT INTO destinationTable
SELECT s.ID, s.Name, s.Value
FROM @sourceTable s
INNER JOIN @numbers n
ON s.Value >= n.value
ORDER BY s.ID
This performs an insert select to a made up table. We join the rows from @sourceTable (your example data) to the @numbers table where the Value column from @sourceTable is less than or equal to the value column in the numbers table. If s.Value is 1
we'll perform this join once. If it's 2, twice and so on. This works because of the way we set up the numbers table. If we had insert multiple 1's it would cause additional joins.
A numbers table is a handy tool to have for things like this were you need iterations. Create a database (or schema) on your database and call it something like 'Toolbox'. In that database/schema you can put things like this that have little to do with your
actual data, but come in handy. You can make your numbers table as long as you need. It totally wouldn't hurt at all to have a numbers table with hundreds of thousands of rows. They're just int's, they don't eat much :).
Let me know if you'd like anything clarified more.

How to loop through XML data in a table of XMLType?

Hi,
I am failry new to xml document processing in Oracle using PL/SQL.
My DB version: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
I have successfully loaded an xml document into a table using the following two statements:
1) CREATE TABLE mytable2 OF XMLType;
2) INSERT INTO mytable2 VALUES (XMLType(bfilename('IMAGE_FILE_LOC', 'IFTDISB20100330172157C002.xml'), nls_charset_id('AL32UTF8')));
Now I need to traverse through the various nodes within the xml document and extract values of elements of each node. The question I have is:
How do I loop through a node? A VALID record is enclosed within the <checkItem> </checkItem> tags.
Here is a snippet of the data in that xml document:
++++++++++++++++++++++++++++++++++++++++++++++++
<?xml version="1.0" encoding="UTF-8"?>
<bdiData>
<documentControlInfo>
<documentInfo>
<docDescription>Check images and data for Test Company, account number 1234567890</docDescription>
<docID>
<ID>20100330172157</ID>
</docID>
<docModifier>Test Company</docModifier>
<docCreateDate>2010-03-30</docCreateDate>
<docCreateTime>17:21:57-0700</docCreateTime>
<standardVersion>1.0</standardVersion>
<testIndicator>0</testIndicator>
<resendIndicator>0</resendIndicator>
</documentInfo>
<sourceInfo>
<sourceName>The Bank IFT</sourceName>
<sourceID>
<idOther>TheBankIFT</idOther>
</sourceID>
</sourceInfo>
<destinationInfo>
<destinationName>Test Company</destinationName>
<destinationID>
<idOther>FEI3592</idOther>
</destinationID>
</destinationInfo>
</documentControlInfo>
<checkItemCollection>
<collectionInfo>
<description>Items</description>
<ID>1269994919135</ID>
<Classification>
<classification>Items</classification>
</Classification>
</collectionInfo>
<checkItemBatch>
<checkItemBatchInfo>
<description>Paid Checks</description>
<ID>1269994919135</ID>
<Classification>
<classification>Paid Checks</classification>
</Classification>
</checkItemBatchInfo>
<checkItem>
<checkItemType>check</checkItemType>
<checkAmount>86468</checkAmount>
<postingInfo>
<date>2010-03-29</date>
<RT>10700543</RT>
<accountNumber>1234567890</accountNumber>
<seqNum>009906631032</seqNum>
<trancode>001051</trancode>
<amount>86468</amount>
<serialNumber>300040647</serialNumber>
</postingInfo>
<totalImageViewsDelivered>2</totalImageViewsDelivered>
<imageView>
<imageIndicator>Actual Item Image Present</imageIndicator>
<imageViewInfo>
<Format>
<Baseline>TIF</Baseline>
</Format>
<Compression>
<Baseline>CCITT</Baseline>
</Compression>
<ViewSide>Front</ViewSide>
<imageViewLocator>
<imageRefKey>201003260000738400851844567205_Front.TIF</imageRefKey>
<imageFileLocator>IFTDISB20100330172157M002.zip</imageFileLocator>
</imageViewLocator>
</imageViewInfo>
<imageViewInfo>
<Format>
<Baseline>TIF</Baseline>
</Format>
<Compression>
<Baseline>CCITT</Baseline>
</Compression>
<ViewSide>Rear</ViewSide>
<imageViewLocator>
<imageRefKey>201003260000738400851844567205_Rear.TIF</imageRefKey>
<imageFileLocator>IFTDISB20100330172157M002.zip</imageFileLocator>
</imageViewLocator>
</imageViewInfo>
</imageView>
</checkItem>
<checkItem>
<checkItemType>check</checkItemType>
<checkAmount>045</checkAmount>
<postingInfo>
<date>2010-03-29</date>
<RT>10700543</RT>
<accountNumber>1234567890</accountNumber>
<seqNum>008518967429</seqNum>
<trancode>001051</trancode>
<amount>045</amount>
<serialNumber>200244935</serialNumber>
</postingInfo>
<totalImageViewsDelivered>2</totalImageViewsDelivered>
<imageView>
<imageIndicator>Actual Item Image Present</imageIndicator>
<imageViewInfo>
<Format>
<Baseline>TIF</Baseline>
</Format>
<Compression>
<Baseline>CCITT</Baseline>
</Compression>
<ViewSide>Front</ViewSide>
<imageViewLocator>
<imageRefKey>201003290000713900851896742901_Front.TIF</imageRefKey>
<imageFileLocator>IFTDISB20100330172157M002.zip</imageFileLocator>
</imageViewLocator>
</imageViewInfo>
<imageViewInfo>
<Format>
<Baseline>TIF</Baseline>
</Format>
<Compression>
<Baseline>CCITT</Baseline>
</Compression>
<ViewSide>Rear</ViewSide>
<imageViewLocator>
<imageRefKey>201003290000713900851896742901_Rear.TIF</imageRefKey>
<imageFileLocator>IFTDISB20100330172157M002.zip</imageFileLocator>
</imageViewLocator>
</imageViewInfo>
</imageView>
</checkItem>
<checkItemBatchSummary>
<totalItemCount>1028</totalItemCount>
<totalBatchAmount>61370501</totalBatchAmount>
<totalBatchImageViewsDelivered>2056</totalBatchImageViewsDelivered>
</checkItemBatchSummary>
</checkItemBatch>
<collectionSummary>
<totalBatchCount>1</totalBatchCount>
<totalItemCount>1028</totalItemCount>
<totalCollectionAmount>61370501</totalCollectionAmount>
<totalCollectionImageViewsDelivered>2056</totalCollectionImageViewsDelivered>
</collectionSummary>
</checkItemCollection>
<documentSummaryInfo>
<totalCollectionCount>1</totalCollectionCount>
<totalBatchCount>1</totalBatchCount>
<totalItemCount>1028</totalItemCount>
<totalDocumentAmount>61370501</totalDocumentAmount>
<totalDocumentImageViewsDelivered>2056</totalDocumentImageViewsDelivered>
</documentSummaryInfo>
</bdiData>
++++++++++++++++++++++++++++++++++++++++++++++++
Any ideas and or suggestions will be greatly appreciated.
Cheers!
Edited by: user12021655 on Aug 3, 2010 1:25 PM

I really need to update my blog to get the example you are looking for posted. I did a quick search on the forums for XMLTable and found a good example at {message:id=4325701}. You will want to use OBJECT_VALUE in the PASSING clause where you need to reference the column in your table.
Note: See the FAQ in the upper right for how to use the tag to wrap objects to retain formatting. Also your XML is missing closing nodes.

Loop Through Excel Files and Load into SQL Server Table

I'm following the example here.
https://www.youtube.com/watch?v=_B83CPqX-N4
I'm pretty sure I did all the steps, but for some reason my project is not running. I'm thinking there is a 32-bit or 64-bit issue lurking in here somewhere.
Here's my error message.
SSIS package "C:\Users\Ryan\Documents\Visual Studio 2010\Projects\Loop through Multiple Excel sheets and load them into a SQL Table\Integration Services Project1\Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Error: 0xC0209303 at Package, Connection manager "Excel Connection Manager": The requested OLE DB provider Microsoft.ACE.OLEDB.12.0 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode. Error code: 0x00000000.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
Error: 0xC001002B at Package, Connection manager "Excel Connection Manager": The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine.
For more information, see http://go.microsoft.com/fwlink/?LinkId=219816
Error: 0xC020801C at Data Flow Task, Excel Source [2]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0209303.
There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data Flow Task, SSIS.Pipeline: Excel Source failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Data Flow Task, SSIS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
SSIS package "C:\Users\Ryan\Documents\Visual Studio 2010\Projects\Loop through Multiple Excel sheets and load them into a SQL Table\Integration Services Project1\Package.dtsx" finished: Failure.
The program '[5392] DtsDebugHost.exe: DTS' has exited with code 0 (0x0).
I have 32-bit Excel and 64-bit SQL Server. Is that the issue? Can someone tell me what's wrong here?
Thanks!!
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Sa-weeettttttt!! Thanks. I figured that's what it was. For the benefit of others, this link shows you exactly how to make the modification recommended above.
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20run%20SSIS%20Packages%20using%2032bit%20drivers%20on%2064bit%20machine.htm
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

How to loop through Multiple Excel sheets and load them into a SQL Table?

Hi ,
I am having 1 excel sheet with 3 worksheet.
I have configured using For each loop container and ADO.net rowset enumerator.
Every thing is fine, but after running my package I am getting below error
[Excel Source [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may
be error messages posted before this with more information on why the AcquireConnection method call failed.
Warning: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified
in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
[Connection manager "Excel Connection Manager"] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "The Microsoft Access database engine cannot open or write to the file ''. It is already opened exclusively by
another user, or you need permission to view and write its data.".
Pleas suggest me the correct way of solving above issues.
Thanks in advance :)
regards,
Vipin jha
Thankx & regards, Vipin jha MCP

Hi ,
Please refer the below link for Looping multiple worksheet in a single SQL Table.
http://www.singhvikash.in/2012/11/ssis-how-to-loop-through-multiple-excel.html
Note:-If you using excel 2010 then you have to use EXCEL 12.0 .
Above link explaining step by step of Looping multiple worksheet in a single SQL Table.
regards,
Vipin jha
Thankx & regards, Vipin jha MCP

Error "Screen output are too small" when looping through internal table!

Hello All:
I have a huge internal table with some 79000 records and while looping through them and doing some other processing inside the loop, I am getting an error "Screen output are too small"! Could someone please help mw how to fix this issue? I can send the all the code if anyone wants to look at the code. Thanks in advance and rewards are assured.
Mithun

Hi,
Check this
new-page print off.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
destination = v_dest
IMPORTING
out_parameters = params
valid = valid.
* params-linct = '58'.
* params-linsz = '170'.
* params-paart = 'X_58_170'.
* params-prtxt = v_spool_text.
* params-primm = 'X'.
* params-prrel = 'X'.
NEW-PAGE PRINT ON PARAMETERS params NO DIALOG.
After the call fm GET_PRINT_PARAMETERS params internal table contains all the values for generating spool.
aRs

Loop through table in XI

Similar Messages

Maybe you are looking for