Lov - List of values

people,
am using jdveeloper11g 11.1.1.4.0
first of fall i want do in input text with List of Values
if i select city means
corresponding state and country must be displayed.
can one guideme or else
paste the link regarding this.

hi..
You can archive that with your VO.
In model project double click on sampleVO --> Attributes --> select relevan field --> press green + button for list of value --> select or Add list data source by pressing green + and Add relevant view accessors to shown state and country,finally edit UI hints as you want with adding state and country.
hope this will helpful..

Similar Messages

  • What is Delegated LOV (List of Value) ?

    Hi,
    What is Delegated LOV (List of Value) ?
    Thanks

    The delegate search option on the list of values properties presents the user with an empty list of values at query run time. The user enters search criteria to limit the number of values returned in the list of values.
    To activate the delegated search option for a list of values, in the designer, edit the list of values properties on the object properties page of the object to which the list of values applies.
    The delegated search is not supported for cascading lists of values.
    Regards

  • Problem in using LOV (List of values)

    We created a folder 'Testing FCG' in the Business View Manager.
    1) In this we created a new connection of TCD371 Database ( conn) ,
    2) We created a new Data Foundation(DF)  using the existing connection and we added table 'cdhpmember' in the DF
    3) We created a new business element(BE) using DF and we added the column like Firstname,Groupkey and Gendercode
    4) We created a Business View (BV) using DE and we added DE to the BV
    5) We created a LOV(Memkey) using BV and we selected memberkey field
    6) We tried to implement the memberkey field into crystal report as a dynamic parameter
    7) When we try to run the report we got the error like this
    Promting failed with the following error message: 'Liat of Values failure: failed to get values. [Cause of error:CSELOVDataSource::setReportInstanceCUID The List of Values did not schedule sucessfully and must be re-scheduled.]'.
    Error source : prompt.dll Error code: 0x8004380D
    Could any of you give your input on this error?

    It's happening in Crysatl Report designer tool. Not able to run the report. There's not point deploying it in info view.

  • Use of LOV (list of values) in UCM

    Hi.
    Does anybody know if this can be achieved in UCM?
    Sooner we'll have to deal with huge lists (thousands of values) that could affect performance. Using LOV instead of selected list would suppose a great enhacement and a clear way for a user to search, avoiding him the difficulties that suppose handling with that kind of lists.
    Thanks in advance.

    Hi.
    Does anybody know if this can be achieved in UCM?
    Sooner we'll have to deal with huge lists (thousands of values) that could affect performance. Using LOV instead of selected list would suppose a great enhacement and a clear way for a user to search, avoiding him the difficulties that suppose handling with that kind of lists.
    Thanks in advance.

  • DYNAMIC LOV (list of value)

    Hi all,
    I have created a dynamic LOV using the sql statement:
    Select product_name A, product_code B from product.
    Can I make this LOV more dynamic by putting where conditions?
    For example:
    Select product_name A, product_code B from product where status = &STATUS
    &STATUS is a value from a given field as entered in a current form page.
    Is this possible? or are there other ways to to this?
    Thanks

    wow thats great sunil : )
    Can I also reference the value of P7_ITEM_NAME in anotheR item name like P7_COMMISSION?
    For example: I have two (2) item names: P7_SALARY and P7_COMMISSION
    P7_COMMISSION is computed as :P7_SALARY * 0.10
    So I do not have to enter value in the item name P7_COMMISSION as it is derived from P7_SALARY.
    Is this possible? if not why does LOV able to access it ; )
    Thanks a lot

  • How to get data from list of values (LOV) to be displayed in a text field ?

    Hi guys,
    I am very new to Oracle APEX so please spare me if it is a silly question. How can I get the selected values from a set of list of values (LOV) displayed in a text field (or text area or so) ? Fox example, in my form I create 4 items: STATE, COUNTY, STREET, ZIPCODE and all of them are LOV (list of values). I also create 2 buttons (ADD & REMOVE). Then I create a test field (or text area name SELECTED RECORD). Now here is what I want to do with my form:
    When I set the values for all 4 fields, I will click on the ADD button then I want those values be displayed in the text field.
    For example, if the selected values are:
    STATE = Alabama
    COUNTY = Abbeville
    STREET= 1 Street
    ZIPCODE = 36310
    And the ADD button is pressed. Then in the text field I want it displays like this:
    Alabama,Abbeville,1 Street,36310
    If I choose other values and click ADD again, a new line will be added into the text fields (text area). If I click the REMOVE button, then it will clear those two line in the text field.
    Would it be possible to do it? Any help will be greatly appreciated. Thanks in advance.

    If you can live with the page being submitted and refreshed, make your ADD button do a submit with a request value of ADD and make your REMOVE button do a submit with a request value of REMOVE.
    Then create two computations (one firing with a condition of Request = ADD and the other firing with a condition of Request = REMOVE).
    In the ADD one, concatenate the values together into the text area (most likely a PL/SQL computation wiill be what you want). In the REMOVE one, set it to null with a PL/SQL computation.
    If you want it done without submitting the page, make the buttons each do a redirect to a URL but instead you will have to write two short javascript functions in the page HTML header to manipulate the field values. Each button would call each javascript function in an onclick event.

  • How to make text field in tabular form as List of value (LOV)

    So the problem is next:
    I should to make field in tabular form as LOV(list of value (combobox)) to load there data form db. Could smb take me an advise how to make it.
    Thanks.

    So thanks, I did it, it works. How now to make next: I selected Id from list and in the next column appears name with ID from DB. so how to make ondemand process i know (thanks to you), but how to get value from LOV that I selected to give it to Dynamic Action.
    Thanks

  • JSP, BC4J : Allowing users to choose from List of values when in Insert mode

    Hi,
    I have a requirement in which the user would be able to select a value from a combobox for populating a field when inserting a new record. The list of values in the combo box is derived from a look up table in the database. How can do this?
    Thanks.

    Use the version provided in Jdev 3.2. It has two methods:
    * Enables a LOV (list of values) for the specified attribute in
    * the UI. In the typical case, when an attribute is selected in an
    * HTML form, a LOV will be displayed.
    * <p>
    * This method enables a LOV for one or more of the RowSet's attributes.
    * To return all of the RowSet's attributes,
    * use the {@link #useLOV(String, String) useLOV} method.
    * <p>
    * @param sAtttibute name of the attribute for which an LOV
    * should be enabled.
    * @param voName name of the View Object to which the attribute belongs.
    * @param sDisplayAttributes a comma-separated list of the RowSet's attributes
    * that will be displayed when the attribute is selected.
    * @param sDataAttribute the location from which the attributes' values are
    * obtained.
    * @see #useLOV(String, String)
    public void useListOfValues(String sAttribute , String voName, String sDisplayAttributes, String sDataAttribute)
    JSlibNeeded |= WebBean.JSModalPageConstructorLib;
    LOVField lovField = new LOVField();
    ViewObject vo = qView.getApplicationModule().findViewObject(voName);
    ViewObject dupvo = qView.getApplicationModule().findViewObject(voName + "_query");
    if(dupvo == null)
    dupvo = qView.getApplicationModule().createViewObject(vo.getName() + "_query", vo.getDefFullName());
    lovField.setViewObject(getApplicationName() + "." + dupvo.getName());
    AttributeDef attr = qView.getViewObject().findAttributeDef(sAttribute);
    lovField.setPromptText(getAttributeLabel(qView, attr));
    lovField.setDisplayAttributes(sDisplayAttributes);
    lovField.setDataAttributes(sDataAttribute);
    setFieldRenderer(sAttribute , lovField);
    * Enables a LOV (list of values) for the specified attribute in the UI.
    * In the typical case, when the specified attribute is selected in an
    * HTML form, a LOV will be displayed.
    * <p>
    * This method enables a LOV for all of the RowSet's attributes.
    * To enable a LOV for a subset of the attributes,
    * use the {@link #useListOfValues(String, String, String, String)
    * useListOfValues} method.
    * <p>
    * @param sAtttibute name of the attribute for which an LOV
    * should be enabled.
    * @param voName name of the View Object to which the attribute belongs.
    * @see #useListOfValues(String, String, String, String)
    public void useLOV(String sAttribute, String voName)
    useListOfValues(sAttribute, voName, null, sAttribute);
    null

  • No data in Report parameter inspite of Scheduling of List of Values

    Hi,
    In the Business View Manager, I have created a Business View and LOV(List of Values) based on that view.
    The LOV consists of a cascaded prompt group that is used in certain Crystal Reports as under:
    > Loan Name
    >> Loan Subtype
    >>>  Channel Name
    All the three fields are coming from separate tables. Except table pertaining to Loan Subtype, all other tables and their fields have data. I am of the opinion that if I 'Schedule LOV' it should not prevent populating data into whatever fields from respective tables that contain data.
    I performed 'Schedule LOV' to get data up to Channel Name, and this did not help in bringing data in Loan Name within the parameter screen of Crystal Reports.
    Thereafter I performed 'Schedule LOV' to get data up to Loan Name, and even this did not help in bringing data in Loan Name within the parameter screen of Crystal Reports.
    Is it mandatory to have data in all fields used in LOV, for the data to appear in the highest level of parameter in cascaded prompt group. Your views are welcome.
    Regards,
    Neonevin

    Hi,
    I have created a new LOV upon the same Business View using the same fields in the format of highest level to lowest level as given below:
    > Loan Name
    >> Loan Subtype
    >>> Channel Name
    Then I perform the 'Schedule LOV' again but it does not help as the Report parameters still do not show any values for selection of values in prompt.
    I am getting the following error:
    Item SI_METADATA_ALL_DESCENDANTS was not found in the collection. (CrystalEnterprise115.FW_Properties.1)
    Is this an indication of some inconsistency. What exactly it could be ? How do I derive values in Report prompt through particular LOV ?
    Regards,
    Neonevin

  • URGENT : List Of Values Validation problem

    Hello
    I want to restrict my object(textfield) to not validate my LOV(List of Values) on certain values such as if the textfield contains the value 'ALL' the LOV should not be validated and if the textfield contains value other than 'ALL' then the LOV should vaildate...
    Kindly guide me through this if any one knows what textfield trigger should i use or any other way is required for this purpose.
    Thanx.
    Qaiser Qayyum.
    [email protected]

    The 'right way' to emulate LOV validation is to do the following:
    Set autoskip on in your item, since you want focus to move to the next item.
    Set LOV validation to NO for the item.
    Write a When-validate-item trigger to do this:
    If the value = 'ALL' or value is null then exit.
    For the record group attached to the LOV:
    If the record group is not populated, then populate it.
    Loop through the record group to find a value matching the value entered. If one is found then exit.
    If a value is not found, use show_lov to display the LOV.
    If the user selected a value, then exit.
    If user did not select a value, issue an error message, raise form_trigger_failure.

  • Restrict the list of values retrieved by a model driven LOV

    hi all
    i'm try to restrict the list of values retrieved by a model driven LOV just like the article in this link
    http://www.oracle.com/technology/products/jdev/tips/fnimphius/restrictlovlist/restrictlov.html
    and i'm using the jdev11.2 but i always get this error
    java.sql.SQLException: parameter IN or OUT is missing at index 1
    my code is :
    public void SetSchoolLovVar(LaunchPopupEvent launchPopupEvent)
    String var_val=getOt7().getValue().toString();
    System.out.println("++++++++++++++++++++++++++++++++"+var_val);
    BindingContext bctx = BindingContext.getCurrent();
    BindingContainer bindings = bctx.getCurrentBindingsEntry();
    FacesCtrlLOVBinding lov = (FacesCtrlLOVBinding)bindings.get("DeptCode");
    System.out.print("LOVE "+lov);
    System.out.println("+_+_+_+_+__+_+_+__+_+_+_+_+_+_+_+_+_+_________+++++_+_+_"+lov.getName());
    lov.getListIterBinding().getViewObject().setNamedWhereClauseParam("Rejon_For_Prj_Dept",var_val);
    Rejon_For_Prj_Dept is the bind variable of the Lov Query.
    any good idea

    Hi,
    The error might be due to making the bind variable as required but not using it in the vo query. Edit the bind variable and make it as optional by unchecking the required checkbox.
    Sireesha

  • How to get actual value from LOV list

    Like Subject says: How to get actual value from LOV list. Any help will be appreciated.
    Thanks.

    Thanks Shay, I did it with bind variable because I'm not using JSF. Is there any chance to post solution using standard JSTL or HTML expression. I have something like this: LOV displays some Companies names:
    <html:select property="UserJobCompanyId"
                             disabled="${!bindings[\'UserJobCompanyId\'].updateable}"
                             onchange="submitform();">
                  <html:optionsCollection label="prompt" value="index" property="UserJobCompanyId.displayData"/>                                                     
                </html:select>and I want to get CompanyID of selected Company.
    Thanks, again.

  • Display specific value from List of Values(LOV)

    Hi All,
    Is this possible in BOXI R2 that i created a List of Values like below:
    1. P1AF
    2. P1XA
    3. P2AF
    4. P2XA
    5. P2XD
    6. P3AF
    7. P3XA
    8. P3XD
    and i would like to show only 1 & 2 values for specific users. Or switch on /off some values without accessing the database.

    Can you confirm that this question is posted to the correct forum, or if it should go into another? 
    If this is Universe Designer related, you can review your LOV's by:
    1. right-click on the object in the universe designer, and select Properties dialog
    2. Select Properties tab,
    3. Select 'Display'
    4. then shift or control select the LOV's that you want to be viewable,
    5. enable the checkmark next to 'Show Selected Only'
    6. Click OK, and then save and re-export the universe.

  • BEx query based on virtual cube donu00B4t display a valid List of Value (LOV)

    Hello
    I have a problem with an invalid LOV. The scenario is the following; There´s a BEx query based on a virtual cube. The query has an exit variable on caracteristic that is based on 0CALMONTH.
    At Universe Designer I simply create a connection, a universe based on this query and export.
    At Web Intelligence (also at Live Office), when I try to execute de query, the prompt to fill my exit variable display a list of value that doesn´t match with the values of the caracteristic at the cube.
    Actually, the list at the prompt starts with 01.0000 and finishes with 05.0968.
    In Universe Designer, the option to edit the list of values is not available. But I think that editing the LOV is not the correct way.
    I´ve tried creating a new query based on the DSO that is the source of the virtual cube. In this case, I had a valid list. Unfortunately, I can´t use this DSO.
    Did anyone already have this problem?

    Hi James,
    can you explain what you mean with "input length for that filed" ?
    The field in the table is varchar2(120). I coudn't found options for the List of value.
    Thanks for your response
    Carsten
    null

  • How to change background color in List of Values (LOV) ?

    Hiya
    In Forms 10g, the background color in list of values (LOV) is White whereas it was grey in Form 6i. Also, the position of 3 buttons i.e. Find, OK and Cancel on LOV is different than what it used to be in Forms 6i.
    Is it possible to change the background color and the position of buttons of LOV in Forms 10g ?
    Cheers
    Mayur

    I would like to share the outcome of this issue.
    I had posted this same issue on Metalink yesterday. They (Metalink guys) have confirmed that its an bug in Oracle 10g DS R2 and it would be fixed in subsequent releases.
    Following is an official response from Metalink:
    This issue has been addressed to Oracle Development to be investigated/fixed in the published Bug:
    Bug 1559776 <BACKGROUND COLOR SETTING FOR LOV OBJECT DOES NOT WORK ON WEB>
    Cheers
    Mayur

Maybe you are looking for

  • Dead screen/second monitor

    I have a PB running Leopard and the screen died. (Actually it was killed by a drop) Anyway I want to be able to access it via a second monitor but it is currently set for "Mirroring Off". Is there any way to turn on "Mirroring" by key combinations? (

  • How can I view and print my texts on my computer?

    I need to be able to view my history of texts on my iPhone on my computer.  What is the process?

  • Malformed HTTP request in access.log

    Hi, we're running a quite standard web application on a weblogic server 9.1, clients are using Internet Explorer 6, and lately, I checked the access.log, and sometimes, logged HTTP requests look malformed, for example: access.log00575:xxx.xxx.xxx.xxx

  • Job Control Cancelled

    My Job Control Runs are Cancelled. Error Message below:- Job started                                                        00           516          S Step 001 started (program RMBWV302, variant , user ID )      00           550          S Queue pro

  • How to  write the bytes out

    I have the working code to write the byte[] to the OutputStream, and it works        ServletOutputStream out = null;        BufferedInputStream in = null;         try {             byte[] bytes = new byte[1024];             raf = new RandomAccessFile