LSMW : INFOTYPE 0066 and 0067

Hi All,
I am working on LSMW for following Infotype
0066 - Garnishments/Cession Order and
0067 - Garnishment Debt.
In PA30 when i update the infotype 0066 it automatically goes to Infotype 0067 (i.e to next screen) , but while recording in LSMW after updating infotype 0066 it dosent go to infotype 0067. As per PA30 process it should go to next screen i.e infotype 0067. but in case of recording it directly comes out of recording of infotype 0066 and save it and doesn't go to infotype 0067.
can anyone answer this?
Regards,
Archana.

Hi Archana,
Some times it occurs thorugh LSMW.
I think it not a issue. First you can upload the data 0066.
Then again second recording you can upload the data 0067.
Thanks and Regards,
Revathi.

Similar Messages

LSMW Infotype 0 and 1

Dear all,
I am new in SAP HR. I apologize if the question is oversimplified.
I am trying to upload master data for infotype 0 and 1 using LSMW. I have successful foreground and background uploads, however the uploaded information could not be shown in PA30 when I crosschecked my uploads.
At first I thought there was problem with my recording. But I could not find any errors on that. Could anyone kindly help me with this matter?
Many thanks in advance.
Foong Ming

I used external number range for the ease of upload.
I tried both foreground and background upload with 3 employees. Both uploaded successfully, but I cant find the number range in PA30.
Then I checked saving records, and redo for 3 times new recording with upload trials. All successfully uploaded, but no record found in PA30. Upload log recorded successful upload.
I wonder if there is other method to check the log report besides SM35, and why the uploads are successful yet no records in the system.
Thanks
Foong Ming
Edited by: Foongming on Mar 16, 2010 2:33 AM

HR ABAP Query - Simulated infotypes 2501 and 2502

Dear all,
I am developing a report based on Simulated infotypes 2502 (Quota Statuses) and 2501 (Employee Time and Labor).
Since my report provides an overview of all the reporting quota types and reporting time type to the end-user, I need to extract data from both the infotypes ( 2501 & 2502 ) simultaneously.
I created a report with (Logical Data Base) LDB PNP and the HR report category is also set as required. In other words the attributes is set as same as in standard report (RPTBAL00).
In the declaration part of the program I mentioned the source code as.
INFOTYPES:
*-----Infotypen
INFOTYPES:
0001,     "Org. Zuordnung
2001,     "Absence type.
2002,     "Attendance
2500,     "Personal Work Schedule (Simulated Infotype 2500)
2501,     "Employee Time and Labor (Simulated Infotype 2501)
2502.     "Quota Statuses (Simulated Infotype 2502)
In the START-OF-SELECTION.
                      GET PERNR                                      *
GET pernr. (break point set at statement)
Here my problem is when I execute the report for multiple employees data from simulated Infotype 2501 is deriving wrongly. The data for the first employee will always correct. From the second employee onwards date fields BEGDA and ENDDA will be 00000000. After a detailed debugging (setting break point at GET PERNR statement) I found that the problem is occurring only with Infotype 2501 values and not with Infotype data 2502.
I also note that this will happen only when I use both 2501 and 2502 at same time in the declaration part
INFOTYPES:
2501,     "Employee Time and Labor (Simulated Infotype 2501),
2502.     "Quota Statuses (Simulated Infotype 2502)
Question is How to correct this date field values obtained through GET PERNR for Infotype 2501 when using both infotypes 2501 and 2502 simultaneously.
Per requests for testing this is:
I.     Your system should be configured for reporting time types.
II.     Time evaluation should be run for at least one time to transfer data to simulated infotypes.
III.     Persons with less understanding of SAP HCM may have to take help of a functional consultant.
Please help me in with your valuable suggestions:

Thanks a lot for all your suggestions,
I have tested with this still the same problem persists.
From the second employee onwards the value of P2501-begda and P2501-endda is 00000000.
Step 1: create a new program zhr_test.
Step 2: Assign PNP as the logical data base in the report attributes.
Step 3: Use XXXX2001 as report category.
Code for TEST 1: normal test case
REPORT zhr_test.
TABLES :pernr.
INFOTYPES:
    2501, "Employee Time and Labor (Simulated Infotype 2501),
    2502. "Quota Statuses (Simulated Infotype 2502)
START-OF-SELECTION.
GET pernr.
BREAK-POINT.
Code for TEST 2: suggeated by Venkat.O
REPORT zhr_test.
TABLES :pernr.
INFOTYPES:
    2501 MODE n, "Employee Time and Labor (Simulated Infotype 2501),
    2502 MODE n. "Quota Statuses (Simulated Infotype 2502)
START-OF-SELECTION.
GET pernr.
rp_read_all_time_ity pn-begda pn-endda.
BREAK-POINT.
In Both the cases, infotype 2501 records begda and endda values will be 00000000 from second employee.
You can test only if you have simulated infotypes configured in your system, atleast one time the time evaluation would have been run.
Thanks
Cibin

ABAP-HR Name of the BADI which updates merit salary in infotype 759 and 15.

Hi Friends,
    I want the name of BADI which updates merit lump sum in infotype 15 .
Example 1.
   Employees base pay = 34,000
   Merit increase amount = 1,500
   Employees Salary Range = 25,000 35,000.(This is taken from T710)
IT0759 STXX Pick-up subtypes related to the following plans (MSST, ,MSWH, MSPA, MSAN) = 1,000
IT0015 ST E408 Merit Lump Sum = 500.
In the above example out of 15000(Merit increase amount). 1000 will get updated
in infotype 759. and 500 wll be updated in Infotype 0015.
Question. Which enhancement does this operation. there is BADI called HRPAD00INFTY but this can update only one infotype at one point of time
because new_innnn-infty is a structure which holds only one Infotype at run time.
I would be greateful for this information.

Hi,
        Try HRECM00_GDEGP
other way
Implement this BAdI HRECM00_CONSISTENCY in SE19 & put your validations in the method CHECK_CONSISTENCY .. You will have to use the function module HR_ECM_ADD_MESSAGE to fill your messages & show it on the front end
<b>Reward points</b>
Regards

Infotype 0017 and 0027

Dear All,
is there any possibility to charge the travel expenses of the employee to a cost center that doesnu2019t belong to the company code where the employee is engaged? This is the case of an employee that is engaged in one country (e.g. Italy) and work for another company (cross border, e.g Germany).
Using the infotypes 0017 and 0027 Iu2019m able to assign a CC related to a different company code (and controlling area), but as expecting Iu2019m facing issue when I run the FI accounting programu2026
Could you provide more details about those infotypes

Using the infotype 0017 Iu2019m facing a blocking error related to Tax code.
Seems that this error is generated due to a check that the system is performing between company code identified to be posted the expenses (coming from infotype 17, in the example Italy) and the company code where the employee is engaged. In fact the tax code is created only for Italy while the company code to be posted is Germany.
So if there is a way to allow to the system to propose to Italian employee the Germany trip variant, I will skip the error since the Germany expenses will have the correct Tax code.

Cost Distribution - Infotype 0027 and 1018 cost distri in OM

Hi All,
Whats the difference in functionality between assigning cost center in
"Cost Distribution - Infotype 0027 and 1018 cost distri in OM"
One in employee leven and 2nd in position level, but the concept is same i think,
Also if we assign cost center in department wise, can we identify the cost in individual employee level?
help
Rx

Hi Rx,
There is no difference.
The system reads cost data by following path:
1. read IT 0027
2. if not found in IT 0027, read IT 1018
3. if not fount in IT 1018, read IT 0001
So, yes it is possible to overwrite IT 1018 via IT 0027.
Cheers!

Infotype 105 and 0006 not transferred through ALE

Hi all,
I am sending organisation data (infotype 1000, 1001, 1002, 1003, 1008) & personal data (infotype 0000, 0001, 0002, 0006, 0105) from one SAP system ( ECC 5 ) to another ( ECC 6 ). using ALE and i used message type HRMD_A and idoc type is HRMD_A06 , in that process all my infotype data in moving properly except infotype 0006 and 0105. i am getting IDOC status 52 ( Application document not fully posted) in receiving system. both the infotype (0006,0105) has subtype & i have included respective subtype in distributed model.
can any one tell what could be reason. pleasae help
Thanks,
Madhu

solved by own.

Infotypes 0016 and 0019 stand for?

Hello HCMers,
What are infotypes 0016 and 0019 stand for?
Also What is significance of fields P0016-ENDDA and P0019-TERMN,P0019-TMART in Views P0016 & P0019 respectively?
Could some body please elobarate where its used

IT 0016 is for contract types. It defines what kind of contract the employee has with the company for ex Regular, Contractor etc
IT 0019 is Monitoring of tasks. Suppose you want to define the probation period. You create a subtype here for Probation and also specify when the probation ends P0019-TERMN.
hope this helps
Ajay

Bapi - upload data for infotypes 0016 and 0019

hello,
Please let me know bapi to upload data for infotypes 0016 and 0019 as i am unable to find any bapi for this infotypes.
Please use a more meaningful subject in future - I've edited it for you this time.
Edited by: Matt on Nov 6, 2008 12:08 PM

Hi Sunny,
My suggestion is go txcode BAPI.
After this in the left side of the window complete information on BAPIs will be available search out in Human resource you may get the BAPI, in the mean while some one may help you.
Cheers!!
VEnk@

What is infotype 0105 and subtype 9050 updation?

I got a spec, need to notify supervisor thru mail, whether pernr attached to a position, with failure or success message.
But I need to update Infotype 0105 and subtype 9050.
Where can I see whether these 2 updated or not.
Thanks

Hi,
Go to table PA0105.
All the infotypes table start with PA<infotype number>
Regards,
Atish

Personal area and EE subgroup of Infotype 01 and 77 are not the same. Help!

Hi All,
Good day.
I read your thread here and I guess we have a common problem. Can I ask for your help?
I run the program RPURACU0 to update the new race and ethnicity data in infotype 77. But why it changed the Personnel Area and Employee Subgroup. Only the race and ethnicity codes should have been changed and not the Personnel Area and Employee Subgroup.
Please help me what causes these discrepancies in data.
Example:
In PA20, enter personnel number 7600634. Personal area = US81 and EE Subgroup = U0. But when displaying infotype 77 the Personal area = US02 and EE Subgroup = U1.
The personal area and EE subgroup of infotype 01 and 77 should be the same. In this example, they are not the same. Please help me to find out what causes this problem.
Please reply asap because this problem should be solved immediately.
Thanks in advance.
Carina

Hi GRM,
Thanks for your reply.
I checked the date from the table and I found out that:
P0001-ENDDA not equal P0077-ENDDA
P0001-BEGDA not equal P0077-BEGDA
Please reply asap.
Thanks,
Carina

How to retrieve time data from infotypes 2001 and 2002 when we use PNPCE

Hello Everyone,
   I am new in using PNPCE ldb.In the requirement i have to retrieve time data from infotypes 2001 and 2002 between the begda and endda.I tried using the macro RP-READ-ALL-TIME-ITY to retrieve data.But its not supporting.Can some body help me in doing this.
THanks in Advance..
Regards,
Chinni.

Hi
   Try the following code:
REPORT ZHRTM41.
nodes peras.
Tables: PERNR.
Infotypes: 2001.
start-of-selection.
get peras.
rp_read_all_time_ity pn-begda pn-endda.
end-of-selection.
loop at p2001.
write:/ p2001-abwtg,p2001-stdaz.
endloop.
    It worked for me when using PNPCE. let me know if you have any problem
Thanks,
V.Nagaraju

Unable to Update infotype 586 and 585 through BDC or LSMW

Dear Sir/ Madam,
I am in process of updating actual investment by employee in info type 0586 and 585.
I have already inputed the projected investments in 586 & 585 and as per tax tax is computed.
Also I have written a LSMW to update in the actual Tick.
But the problem is now I want to update actual investemnet using BDC, But my ABAper is unbale to do so as the records has been sorted on the projected investmnet ( ascending order),.
As this is to be updated for nearly 2500 records which vary ..
IKinldy suggest any standard program availble or in BDC can I use the investvent codes in Table T7INI3
Regards
Deepak Gadekar

Hi,
Recording of psv2 and psv1 are complex.
I have done it using BDC since i need to do certain validations.
Go with BDC rather than LSMW.
Kindly mention the fields u need to update.Based on it u can decide on BDC or LSMW?
Edited by: Thyagu on Jun 15, 2009 11:51 AM

Problem with LSMW infotype 1950 recording

Hi !
When I use The LSMW recording facility to play in a PO10 Properties (HR infotype 1950) I get error in the process step when the pgm action to the =UPD command is to clear all the screens fields (pgm MP195000 screen 2000).
I see that when LSMW process step is running sets sy-datar to "X" when MP195000 screen 2000 is executing and then a clear step executes
....but it do not be the same with manually infotyp input by the same screens.
Can some one help me with this problem?

Can I import it from the QA Client....there are lot of recording in this project , in which I just want to export/import only one project , how can I do that .

Standard report for LSO containing infotypes 1021 and 1036

Hello,
Is there a standard report which contains infotypes 1021 (Prices) and 1036 (Costs)?
We have used 1036 to record group proces and; e.g. LSO_RHXKBRO2 doesn't contain 1036.
ERP2005, standard version.
Help is highly appreciated.
BR,
Pia

Hi,
As far as I know, there is no standard report in SAP for master data load using excel sheet. You have write a custom z-program with the help of BDC for basic actions or for individual infotypes upload you can use 'Fast Entry' for quickly uploading data for any perticular infoype using Tcode PA30.
Hope this helps.
Thanks,
Sarika.

LSMW : INFOTYPE 0066 and 0067

Similar Messages

Maybe you are looking for