Lync 2010 - Can't join to a meeting with Web App, client ok

1. User creates an Online Meeting
2. Everyone can join to it with Lync client installed
3. When trying to join without Lync client (or forcing it with "?sl=") an error is received:
The meeting link you are using to join is not valid. Please check the link and try again.
I've tried it with the lates Chrome and IE versions.
Any ideas?
EDIT: Seems to work with older IE browsers...

Hi,
From your description above, it is the issue of the wrong suffix "?sl=". The correct suffix is "?sl=1". Please test if with the correct suffix and check if the issue happen again or not.
More details:
http://blogs.technet.com/b/toml/archive/2011/02/04/how-to-force-the-use-of-the-lync-reach-client-just-append-this-to-the-url-sl-1.aspx
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

Similar Messages

I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydas

Ok... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

I can not join my Apple extreme with the Apple express. I shows a conflict in the network! I've tried everything. How can they join on the same network?

I can not join my Apple extreme with the Apple express. I shows a conflict in the network! I've tried everything. How can they join on the same network?

It says that my DHCP has to be changed! How? to what?
It is 802.11g.express. but is set to default by the computer (Macbook Air).
The other is 802.11n. (express)
Extreme is 802.11.g. Is the Main Airport.
It is on ethernet & wep 128 security.

Can i create an apple account with an app store card, or do i Need an itunes card?

Can i create an apple account with an app store card, or do i Need an itunes card?

You need an iTunes card.
You can setup an account without a credit card if that helps.
http://support.apple.com/kb/ht2534
I found this in the iTunes help menu.
Redeem an iTunes allowance, gift certificate, or Gift Card
If you received an iTunes Store allowance, gift certificate, iTunes Gift Card, or promotional code, you can use it to buy songs, videos, or audiobooks from the iTunes Store.
You need to set up an Apple ID for use with the iTunes Store before you can redeem anything in the iTunes Store. You don’t need to enter credit card information to redeem only the amount of a gift certificate or card.
Before redeeming anything, make sure you are signed into the iTunes Store (choose Store > Sign In, or select Sign In from the navigation bar at the top of the iTunes Store window):
I don't see any mention of App Store cards.

Can i share the itunes amount with mac app store

Can i share the itunes amount with mac app store? I redeemed a giftcard in itunes and is appearing innthe itunes, but i want to use this in mac app store for buying OS X mountain lion?

Log into mac app store stated the amount left on my account. So, confirming itunes gift card can be used to purchase apps from itunes and mac app store.

WBS28 joining a meeting with temporary app on Windows Seven 32bits IE8

Hy!
user is not administrator of windows seven desktop
when joining a metting with temporary app
the temporary application downloads and user is prompted for execution
but nothing happens...
any idea ?
and by the way how does the temporary app work ?
where is the temporary app stored ?
i don't find any docs tha describes the fonctionality...
thanks for your help.

I have really tried many things to identify any possible reason of the issue above. Even rewrote all my javascript navigation code and checked server-side code.
But the only place where I got the solution is at site: http://www.enhanceie.com/ie/bugs.asp which states that there is a bug in IE8 which reads like:
IE0012: IE Travellog broken when navigating back/away from a page with
a large POST form If there is a form input field with a value longer
than 523,659 characters, when you navigate away from the page, IE may
clear the current session's travellog (similar to history), disabling
the back and forward buttons. Repros in IE6 & IE7.
There are following solutions that you can go for:
- Check for the input field that has lots of characters as mentioned above and solve your problem.
- If you have control over the system where IE8 will be used, you can add the following registry key on that machine. There is no existing key, so, you need to add a new one:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\TravelLog] "MaxSize"=dword:ffffffff
I am really relaxed to find this information as I spent really long time to solve this issue. Hope this will help someone.

Can't Edit Data in Access 2013 Web App

I have an Office 365 P1 account that I have been using to create apps in Access 2010. I tried Access 2013. But when I launch an app, it loads in my Office 365, but editing data is not enabled (the Add and Edit buttons are displayed, but not enabled).
I have tried creating a new custom web app with one simple table and a view, as well as creating one using a Microsoft pre-built template, and simply creating the app and launching it. In both cases, the app displays, but I cannot add or edit data.
Is there something with my Office 365 account that is limiting my ability to work with Access 2013 web apps?
Thank you!

Hi KrisMarshall7,
In regarding of the issue, please provide us more information to assist you better.
What the file format is your Access 2007 file? MDB or ACCDB?
Where do you want to add the columns? Table, form or query?
As far as I know,
the limitation of columns in a table is 250. Thus, I suppose that the database had some hidden columns. Please try to check it. Steps:
Right-click any field title, then select Unhide Fields. A dialog box will appear. Click the check boxes of any fields you would like to be visible again, then click Close.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Is any one tired of buying apple products to have them die or become obsolete in 1 to 3 years? I have 2 Ipod touch 5 nanos 1 pad out of all 3 are useable. Batteries die or you can't upgrade to use them with new apps. BIG WASTE OF MONEY.

I have gone through so many apple products to have the battery go out in 1 year or become obsolete in 3 years. I don't believe new apps can't be made to work with older devices and batteries should last more than a year. At this point I feel it's like so much in our world to force us to buy new or use our 3 year old ipod touch as a glorified MP3 player. Some of us can't afford to replace our devices if your like me you expect to use Apple products for a long time that's why you purchase Apple. I bought a ipad so i wouldn't have to carry a laptop but if I want to download music or a book to my nano or ipod touch I can't and who want to take a walk carrying a ipad? Would it be so hard to make a cord to attach a nano to a pad so you can download stuff? What happened to making the consumer happy? Then you call to get answers and you get, sorry that's the way it is we can't help you. I have a box full of apple devices that aren't working or can't be upgraded, I just purchased a nano7 to replace my nano 4 ( the battery dead) this will be my last Apple product until they start standing behind there products like they use to. Far beyond not happy

I have two old ipod classics ( 6 and 7 years old), an ipod nano, the original iphone, iphone 3gs, iphone 4, iphone 4s and an iphone 5. All still work just fine.
You may be the exception.
Apple Tops Customer Satisfaction Again, Samsung Gains (AAPL)
Apple tops in customer satisfaction for 8th year | The Digital Home ...
Apple Tops Customer Satisfaction Again, Samsung Gains ...
Apple No. 1 in customer satisfaction for 8th year: report - MSNBC.com
Apple Still Reigns Supreme In Customer Satisfaction - TechnoBuffalo
Apple keeps top spot in customer satisfaction - Computerworld

How can I set up company ipads with preloaded apps and files?

I want to set up multiple ipads with preloaded apps and files before handing them out to employees. We intendend the employee to be able to install their own content on the device using their own itunes account. When I attempted to connected to a pc using a personal account my the content obtained by the company account was prompted to be removed. Was this done incorrectly? Is there a way I can set up company ipads with preloaded apps and files so that they don't get removed when the user connects them to another computer with another itunes account?
Right now we are looking to have the employee use their own itunes account and reimburse the expense for the needed apps, but this could be an issue if they leave the company and the device is reassigned.

Yes this is possible. I've been using Apple Configurator to do this (you could also use iTunes to restore backups). The trick is, you need to tell the end user not to sync apps within his/her iTunes on his/her computer. You will need to instruct the end user to download apps OTA using the App Store on the iPad rather than with iTunes on his/her computer. If the user tries to sync apps on his/her computer, it will wipe out apps that you installed. However if the user downloads apps OTA, your apps and the user downloaded apps will both stay on the iPad.
When you hand the iPad to the user, be sure to log out of your company Apple ID on the iPad at Settings -> Store and have them sign in with their personal Apple ID. That way it is all set for them to download apps under their own Apple ID.
~Joe

Can not add a New appointment to a shared calendar in Outlook 2010, can only add a New Meeting.

Hi
I can not add a new appointment to a shared calendar in Outlook 2010. I can see the calendar and appointments in it (all appointments are marked as busy, the detail can not be seen. I want it to do this) and I can and a New meeting to the shared calendar
but I can not add just an appointment.
I do not want e-mail being sent to the owner of the shared calendar everytime I add something.
When I view the appointment that im creating in the shared calendar the New appointment button is greyed out but the New meeting button is available.
The permision on the shared calendar for the user is:
Custom
Read = none
Write = create items, create subfolders, edit own
delete = Own
Other = folder visable
Thanks
contributor permission in outlook 2010 calendar does not work, I have given this as permision but issue is the same. We currently connect to an exchange server 2003;

Hi Cmrl,
Does it happen when you create an appointment via OWA?
Does it happen when you create an appointment via Outlook 2003?
Do you have any mobile device?
How many users encountered the issue, all users or some user?
At first, I suggest you recreate outlook profile.
At second,
use PFDAVAdmin
to correct any problems found.

How can I use AirPlay from a wireless device while in 'Join a network' mode with an Ethernet client?

I just got the brand new Airport Express (simultaneous dual-band 802.11n) and I'm trying to set it up to join an existing working wireless network that I have in my house, and to drive my home stereo amplifier and have my desktop hooked up via the wired Ethernet port on the Airport Express. Here's how I set it up:
-Wireless mode is 'Join a wireless network'
-Wireless Network Name: <my home network>
--Allow Ethernet clients is checked
-Internet is configured via DHCP (it gets a valid DHCP lease and IP address on my subnet)
-AirPlay is enabled
-The audio out from the Airport Express is connected to my amplifier via an optical digital cable.
If I leave it set up just as described above, I can select the Airport device from iTunes on my MacBook Pro and play music directly to the speakers. Perfect.
The problem comes when I go to plug in my desktop to the wired Ethernet port on the Airport Express. As soon as I plug in the Ethernet, AirPlay stops working on the laptop. Even if iTunes is in the middle of playing a track, the track will stop when the Ethernet cable is plugged in (with a device on the other end). Doesn't matter which of the two Ethernet ports I use. My desktop is able to use the internet while plugged in to the Airport Express, but iTunes on the laptop is no longer able to connect to the Airport Express to use AirPlay.
I've found that if instead of plugging my desktop into the Airport Express's wired ethernet, I plug in the laptop, then iTunes on the laptop is able to use AirPlay -- but then no other devices on the network are able to use AirPlay.
It appears that as soon as I plug in a wired Ethernet device to the Airport Express it only "listens" to AirPlay connections from devices connected to that wired interface. But this is the opposite of what I want. I want it to listen to AirPlay connections from wireless devices connected to the same network as the Airport Express. Is this possible? Is there some hidden setting I have to enable?
Thanks!

Hi Hreb,
I can find nothing wrong with your configuration, but I was curious if there were something illegal about having an Express "join" a wireless network, and still have AirPlay enabled for wireless clients while simultaneously serving as a bridge to a wired one.
To address that uncertainty I implemented your proposed application with the preceding model AirPort Express, and determined it works as you would expect it to: I connected a wired-only PC to the Express, verified that it can connect to the Internet, and streamed Airtunes from a Mac to speakers connected to the Express. I think this is what you want, and it works with no surprises. I was also able to stream Airtunes from the PC connected to the Express as you did, but as you know only one device can stream to the Express at any one time.
I do not have a new simultaneous dual band Express to test though, so all I can conclude is that there may be a bug with the new one that is preventing you from accomplishing this.
Since it is new, I recommend you call Applecare on Monday and explain what you are trying to do. Explain it works with the older Express and you think this ability should remain unchanged with the new dual band model. It is likely they won't be able to help, and at best will offer to exchange it for another one, but if it is a bug as I suspect any replacement dual-band Express will behave the same way.
The important thing is to inform Apple and obtain a case number so that this problem will eventually get the attention of Engineering who might be able to address this with a future update.
Let me know what you find out. Thanks.

How can I record an Adobe meeting with audio from BT MeetMe?

I am trying to record an Adobe Connect meeting however would like to record the audio from a BT MeetMe conference. Is there a way to tie the two together?

You may be able to use the Universal Voice tool. When logged into Connect Central, go to My Profile > My Audio Providers > New Provider. Put in the relevant information for calling into your BT confrence bridge.
Full instructions on filling in the fields can be found here (you don't need to do this in the Admin section though): http://www.connectusers.com/tutorials/2009/11/uv_admin_setup/
Then when that process is done, go to My Audio Prioviders, in My Profile and select New Profile. Select the profile you just created and click Save. Then, at the bottom of the Edit page for your meeting room, you should have the option to integrate your BT phone bridge into the connect room.
You can connect the phone bridge via the Audio menu in the meeting room, and if everyone is going to be on the phone, I would disable the audio broadcast for the bridge, so attendees don't hear the audio through their phone and computer. The audio will still be recorded with the presentation.

Can we join external Excel file with data to an existing report in BIP

Hi,
I have created a report in BIP and the output being previewed is in Excel.
ex : i'm trying to get emp_id , emp_name, emp_Address from a datasource called "EMPLOYEE_DEV".
Now i have an external excel file (which has data) containg emp_job_title, emp_id, emp_salary...............this data comes from a different datasource called DETAIL_DATABASE.......
My question - is it possible to join an external excel file (from different datasource - DETAIL_DATABASE) to an existing report in BIP(another datsource - EMPLOYEE_DEV ).
Coz at the end i have to show emp_id, emp_name, emp_Address, emp_job_title, emp_salary........by using emp_id as a join between these two.
Please help me with this.
Thanks.

Can you load the data from the excel file into a table that you can query against? If so, you can have two data models: one for the employee_dev and one for detail_database source and then use Concatenated SQL Data Source or you can have a single query with the data you need from both tables.
BI publisher allows you to use a file as a datasource, however I believe it has to be an XML file. You should be able to save the Excel file as XML; however if you want to concatenate the data with another data model with a sql query, the data generated has extra tags and I am not sure if you will be able to use it to create a template.
Hopefully others can chime in and provide any suggestions or experiences they have had in dealing with such situations.

Exchange 2010 can't send or receive email with attachments.

Hello,
We have an Exchange 2010 server, running under Windows 2008R2. Both the server and Exchange are current for Windows and Exchange updates. Exchange is on SP3 installed about a month ago with no errors reported in the event logs.
The problem is that attachments over about 1 MB do not send or receive and no error message is returned. If I send an email message with a 3 MB attachment to myself, it reports as sent in Outlook. On the Exchange server the message queue shows nothing in
the queue. I try to use Exchange mail flow tracking tool and it hangs when selecting “messages received from” option. I gave up waiting after 5 minutes for the display to populate.
As the server is set attachments should be able to send and receive up to 20 MB.
I checked and verified all settings I could find related to this. I checked with the Exchange Management Console per the following article:
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/managing-limits-exchange-server-2010-part1.html
I also checked using the Exchange Power Shell using the following article:
http://eightwone.com/2010/09/29/exchange-message-size-limits/
Both show that all settings are suitable. Details are below
I would appreciate feedback on this problem.
Thank you!
Details from the articles noted above:
First test was to attach a 3 mb text file in Outlook sent from my in house account to my in house account. After 5 minutes the test message was not received nor was there an error message returned.
Checked The Exchange server mail queue and there was nothing in the queue. Checked the Exchange mail flow tracking tool and it hung when selecting “messages received from” option.
Reviewed and verified settings per the following 2 articles:
Article #1
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/managing-limits-exchange-server-2010-part1.html
Organization Configuration>Hub Transport>General Settings>Global Settings>Transport Settings set to max receive size (KB) = 20480
Settings set to max send size (KB) = 20480
Organization Configuration> Hub Transport> Send Connectors tab.
Maximum message size (KB) set to 20480
Exchange Management Console> Server Configuration> Hub Transport> and then on the right side, select the desired server.
A list of all Receive Connectors will be shown below
There are 3 receive Connectors
#1) named Client XXXXXXXXXX
Maximum message size (KB) set to 20480
#2) named Default XXXXXXXXXX
Maximum message size (KB) set to 20480
#3) named relay
Maximum message size (KB) set to 20480
Use Exchange Management Shell to check settings
#1) Get-ADSite
Returns:
Name                           HubSiteEnabled
Default-First-Site-Name        False
#2) Get-ADSiteLink
Name                      ADCost     ExchangeCost    Sites
DEFAULTIPSITELINK         100                        {xxxx.local/Configuration/Si...
#3) Get-ADSiteLink | select Max*
MaxMessageSize
unlimited
Exchange Management Console>Expand Organization Configuration>Click on Hub Transport item>Click on Transport Rules tab
No rules
Article #2
http://eightwone.com/2010/09/29/exchange-message-size-limits/
COMMAND: Get –TransportConfig
results:
ClearCategories                     : True
ConvertDisclaimerWrapperToEml       : False
DSNConversionMode                   : UseExchangeDSNs
ExternalDelayDsnEnabled             : True
ExternalDsnDefaultLanguage          :
ExternalDsnLanguageDetectionEnabled : True
ExternalDsnMaxMessageAttachSize     : 10 MB (10,485,760 bytes)
ExternalDsnReportingAuthority       :
ExternalDsnSendHtml                 : True
ExternalPostmasterAddress           :
GenerateCopyOfDSNFor                : {}
HygieneSuite                        : Standard
InternalDelayDsnEnabled             : True
InternalDsnDefaultLanguage          :
InternalDsnLanguageDetectionEnabled : True
InternalDsnMaxMessageAttachSize     : 10 MB (10,485,760 bytes)
InternalDsnReportingAuthority       :
InternalDsnSendHtml                 : True
InternalSMTPServers                 : {}
JournalingReportNdrTo               : <>
LegacyJournalingMigrationEnabled    : False
MaxDumpsterSizePerDatabase          : 18 MB (18,874,368 bytes)
MaxDumpsterTime                     : 7.00:00:00
MaxReceiveSize                      : 20 MB (20,971,520 bytes)
MaxRecipientEnvelopeLimit           : 500
MaxSendSize                         : 20 MB (20,971,520 bytes)
MigrationEnabled                    : False
OpenDomainRoutingEnabled            : False
Rfc2231EncodingEnabled              : False
ShadowHeartbeatRetryCount           : 12
ShadowHeartbeatTimeoutInterval      : 00:15:00
ShadowMessageAutoDiscardInterval    : 2.00:00:00
ShadowRedundancyEnabled             : True
SupervisionTags                     : {Reject, Allow}
TLSReceiveDomainSecureList          : {}
TLSSendDomainSecureList             : {}
VerifySecureSubmitEnabled           : False
VoicemailJournalingEnabled          : True
HeaderPromotionModeSetting          : NoCreate
Xexch50Enabled                      : True
COMMAND:
Set-TransportConfig –MaxReceiveSize 20MB –MaxSendSize 20MB
C:\Windows\system32>Set-TransportConfig -MaxReceiveSize 20MB -MaxSendSize 20MB
WARNING: The command completed successfully but no settings of 'Transport Settings' have been modified.
COMMAND:
Get-SendConnector
Identity                                AddressSpaces
Enabled
Internet                                {SMTP:*;1}
True
COMMAND:
Set-SendConnector -Identity Internet -MaxMessageSize 20MB
WARNING: The command completed successfully but no settings of 'Internet' have been modified.
COMMAND:
Get-ReceiveConnector
Identity                                Bindings                                Enabled
XXXXXXXXXX\Default XXXXXXXXXX           {0.0.0.0:25}
True
XXXXXXXXXX \Client XXXXXXXXXX     {:::587, 0.0.0.0:587}                   True
XXXXXXXXXX \relay                        {0.0.0.0:25}
True
COMMAND:
Get-ReceiveConnector | fl Identity,MaxMessageSize
Identity       : XXXXXXXXXX \Default XXXXXXXXXX
MaxMessageSize : 20 MB (20,971,520 bytes)
Identity       : XXXXXXXXXX \Client XXXXXXXXXX
MaxMessageSize : 20 MB (20,971,520 bytes)
Identity       : XXXXXXXXXX \relay
MaxMessageSize : 20 MB (20,971,520 bytes)
COMMAND:
Get-AdSiteLink | fl Name,*max*
Name           : DEFAULTIPSITELINK
MaxMessageSize : unlimited
COMMAND:
Get-RoutingGroupConnector <ConnectorID> | FL Name, *Max*
No routing group connectors are installed
Individual
Recipient Configuration > Mailbox>Properties of the User> Activate tab Mail Flow Settings> Properties>Message Size Restrictions settings:
Set to 20480 for send and receive for all.
Re-tested and had the same problem.
Post on Technet.

ExchangeITPro,
Thank you for your reply.
>what SP are you at?
As noted in the first paragraph: "We have an Exchange 2010 server, running under Windows 2008R2. Both
the server and Exchange are current for Windows and Exchange updates. Exchange is on SP3 installed about a month ago with no errors reported in the event logs."
>try restarting the transport services.
Done previously as well as the entire server. No change.

How can I join a Vista workgroup with Leopard?

Hi there - I need help to join my leopard (bought today) to a Vista home workgroup.
Thanks

rosse wrote:
Hi there - I need help to join my leopard (bought today) to a Vista home workgroup.
Thanks
In Vista be sure you have sharing turned on. You will see a common folder "Public" in the desktop explorer. For starters, drop a text file into it.
Not to get too much into Winders, but you rightclick the Public folder to get to the enable sharing dialogue.
On the Mac, you should simply see the Vista computer in the Finder, under its name, "WORKGROUP" or whatever.
Double click it and then in the Finder to the right you see a little area that says, "Connect as"
(I missed that one the first time)
Click the button and you get a popup login window.
Use your Vista logon name and password and there you go.
Message was edited by: nerowolfe

Lync 2010 - Can't join to a meeting with Web App, client ok

Similar Messages

Maybe you are looking for