Mac Book wont pick up the Airport signal unless near the iMac
Hey
Since the latest update (?) my MacBook has been blanking on my airport on start up. It's been using the same network for years. It only picks up with a cold reboot if sitting in front of the iMac. Then it's happy as Larry - full bars, anywhere I take it around the apartment.
Have cleared the Keychain and reloaded network from Preferences. Tried scanning but that stops prematurely after picking up a network signal 15 stories up - 25% strength on AirRadar - my own airport is 50-60% on AirRadar. Airport is on Ch 13, neighbours are on 1 and 6.
It's just blanking it like an ex after a bad break-up.
Urgh.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Similar Messages
-
My mac book wont recognize my ipod. My Ipod will make the initial connected sound saying its charging but otherwise theres no way of finding the Ipod anywhere on the computer or Itunes. Please help with anyway I can get the Ipod recognized so I can download music from Itunes to my Ipod. Thanks in advance.
Hello xerxes.nashion,
It sounds like your iPod is not recognized by iTunes or your MacBook Pro. I recommend following the steps in the article below for an issue like this:
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/TS1410
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I installed an airport express, on my mac book i can use the airplay using iTunes, but on my iPhone en ipad the icon for airplay not appears on the screan when i start the music player.
Chances are, you have already tried this and already know the answer.
But, if not....sorry, but no......since your printer is not AirPrint compatible, you must use the extra software workaround in the Mac.
A newer AirPrint printer would allow you to do what you want. -
I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?
Mixing files with data is not always great idea.
See info here.
Q3 http://pondini.org/TM/Time_Capsule.html
Why not just connect the PC directly to the TC by ethernet and copy the files over?
It is hugely faster and much less mucking around.
In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
There is more info here.
http://support.apple.com/kb/HT1331 -
Why my mac book pro went to the US?
Hi~
Ordered a 13 mac book pro on apple in Canada. And now my mac book pro is in US...
3/28/2015 - Saturday
4:30 pm
Departed FedEx location
MEMPHIS, TN
2:32 am
In transit
MEMPHIS, TN
1:23 am
Arrived at FedEx location
MEMPHIS, TN
3/27/2015 - Friday
4:16 pm
Left FedEx origin facility
RIALTO, CA
2:58 pm
Shipment information sent to FedEx
1:45 pm
Picked up
ONTARIO, CA
I have no idea when I will receive my mac book...and the Fedex stops updating...
Is this normal?
Thank you.Rachel2014ON wrote:
Oh! I see, Thank you.
I made a mistake... I took Ontario, California as Ontario Canada....
As per the reply from lllaass That may indeed be the case. My recently purchased, refurbished Mac followed a similar shipping route. And, I have found Apple shipping times quite accurate. -
Mac book wont charge or start up
mac book wont charge or start up
hi
i'm french
i need your help please
my mac book air 2009 wont start
when i push the start knob the apple appears, the circle turn and a few second after it shut down
when i start with T it wont to be used in harddrive mode
whan i start with hold on cmd"s" a big text appears and say
Intel PATA has safe-sleep
i dont know what to do
please help
all the best
peace
jm
MacBook Air, Mac OS X (10.7.4), 2009 model -
My mac book wont play music outloud?
My mac book wont play music outloud and is lighting up red what should i do?!
rapidly insert and remove the headphones in and out of the jack. Their is an internal toggle switch and your mac still thinks the headphones are plugged in.
-
I am using FCP 7.0.3 on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?
.. and by the way, the jump from FCP 6.0.3 to FCP 7.0 (or higher) isn't an "update" It's a full version "upgrade" that has to be done using the install discs (or disc images).
-DH -
I have a mac book pro. Yesterday the mail app failed to open. I have tried to open it from the dock and the application folder but nothing happens. Does anyone have any suggestions to get it to work?
You don't need iDVD unless you are going to make DVDs. If you are just trying to share files, iDVD won't help you at all.
What you want to do is in iMovie, choose File/Share/File, and export that way. It creates an .mp4 file that should be readable on Macs or Windows.
You could also File/Share/YouTube if you don't mind posting them to YouTube, because of course YouTube videos are watchable by any Mac or Windows computer made in the last 10 years. -
Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?
Go to System Preferences>Displays and set the resolution to "Best for this computer" (or something to that effect).
Clinton -
How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps! -
I have transferred my itunes from pc to new mac book pro. In the syncing of ipod have lost playlists. Is there a way of getting them of old pc library into itunes on mac. Seems to only allow me to do it song by song?
I have transferred my itunes from pc to new mac book pro. In the syncing of ipod have lost playlists. Is there a way of getting them of old pc library into itunes on mac. Seems to only allow me to do it song by song?
-
How can I add a Epson Stylus SX445w to my Mac Book Pro
This is the second one I've tried and failing miserably...it should be so simple...I've installed poken to the help line at Epson and they say it's down to Apple !! Somebody please help meYes I did everything that I was instructed to do!
Cheers
Joyce -
Hey, migration from an old mac late 2008 aluminium to a brand new mac book air. Only the new one has firewire. Transmissiom via wifi estimates ~50h. Is there a faster Way to sync? Tanks in advance
I'll venture that your problem here is that you're using two very different versions of Mac OS X. The USB adapter has been useful to me when making big downloads or while using other networks, but it might not be your case.
Here's what I would advise, though it may be less than stellar: Copy the files you need into folders and move them through a USB flash drive or using that external hard drive of yours. (Could the format be the reason your MBA can't see it?). Some stuff like calendars and contacts can be exported too. At least in Lion, I haven't used Tiger in a while.
Good luck. -
my mac book was refused by the apple service center as the mother board was crashed , pls help me what to do
If you live in a big city, then I would recommend an independent computer store that fixes Macs. There are many mom and pop computer stores that fix your computer. Just Google it.
Maybe you are looking for
-
Not opening in photoshop elements 12
I have an Aperture Library 3.5.1 and am trying to open an image to edit in Photoshop Elements [Editor] 12 -- when I click on the picture using Control and select that choice, it says it's preparing it to go to PSE and be editted = but nothing opens i
-
Problem in executeQuery(SQL query sentence with a ' );
for example: String strName=""; //here strName is searching key value. String strQueryString="SELECT * FROM Authors WHERE name='" strName "'"; ResultSet rs=st.executeQuery(strQueryString); if strName value is "yijun_lee",that will return all informat
-
DDR500 and the Mysterious Vanishing PAT
So. I don't really post here, but I lurk almost daily. Thus I'm pretty much at the end of my tether with these two (apparently unrelated) issues. First, although I have RAM specifically rated at 500 MHZ, whenever I try to change the DDR Frequency fro
-
Reload a jsp without using javascript
I need to reload a jsp based on some jsp condition. I know that I can't do something like below: <% if (reloadCondition == true) { %> <script language="JavaScript"> document.location.reload() </script> <% } %> Any suggestions?
-
Customize Inspection type 09 Recurring Inspection
Hello, Our customer needs to analyze how to customize Recurring Inspection. My question is the way of warking of this. I have seen on saphelp some questions, but it is not enough for us. It is possible to create automatically and inspection lot when