Mac FTP problem with DW MX 2004
Hi, I've checked the boards on this one and nothing is
working. Checked Passive and Secure FTP and that didn't work
either. This is a problem I only get when uploading somewhat large
(23mb) mp3's. The other smaller files go up easily. Also, when I
upload the mp3's, DW doesn't actually place the mp3 on the server
until I disconnect the connection. Otherwise it will re-upload what
has already uploaded, over and over again, something like a broken
record with a "waiting for the server" for about 30 secs in
between.
Can anyone please help. It is very annoying and not very
efficient use of time. I end up uploading all the files in my
folders by hand, so you can imagine how long it takes.
Thanks In Advance,
Jason
Are the changes made in the local sites after you cange the
Library items?
Look at the page locally and see. If the local files are
changed and if you
have uploaded them, then you will see the changes on the
remote site
PROVIDED your have refreshed your browser cache.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ab9hz" <[email protected]> wrote in message
news:fevh6b$ksj$[email protected]..
> I've recently changed from MX to MX 2004 and it's
causing me a few probs.
>
> When i update a library item it seems to have updated on
all the relevant
> pages, however, when I upload the pages to the server
the change to the
> Library
> item doesn't come through.
>
> anyone any ideas why?
>
Similar Messages
-
I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...???? In the box with the disk came the product key, have put it in and it doesnt work. Please help..x
unfortunately - you can not. you can't even buy outlook by itself at microsoft's own website.
does it have to be outlook? maybe you can get away with using something else that's outlook compatible.
how about trying Thunderbird for Mac OS?
or maybe you can call apple and let them know you purchase the wrong version - they might give you a break and just pay the difference for the home and business version.
good luck -
Lightroom 5, Mac. Problem with the Radial Tool. Marquee Lines disappear.
Lightroom 5 Mac. Problem with the Radial Tool. I use this tool a lot. I must have hit a hot key by accident because between photos the marquee lines have disappeared and i don't know how to get them back. Without the marquee lines there I cannot rotate or expand the radial tool.
I have attempted to uninstall, empty trash and a fresh download from Adobe. The problem is still there...
-
Snow Leopard Problems with Microsoft Office 2004
I installed Snow Leopard about two months ago. Ever since I have nad problems opening Microsoft Worrd 2004. Every time I try to open Word it hangs up at "Optimizing font menu performance..." Before I installed Snow Leopard I had no problems with any Office 2004 applications. I also have a lot of problems with fonts when I open Safari.
This message occurs whenever your installed fonts change. I work for a publisher so was getting it all the time as I turned fonts on and off for different projects.
In Office 2004, do this:
1. Go to */Applications/Microsoft Office 2004/Office/Support Files/*
2. Rename or move FontCacheTool. (Requires administrator access)
In Office 2011, do this:
1. Go to *~/Library/Preferences/Microsoft/Office 2011/*
2. Delete *Office Font Cache*
3. From Terminal, type touch" then drag in the Office 2011 folder
4. Back in the Finder, do Get Info on the new, empty *Office Font Cache* file. Make it read only and lock it.
Notes:
1. WYSIWYG menus will now just show the font name in standard font.
2. You may be able to disable the 'optimising' message more easily by going to Word's preferences and turning off the 'WYSIWYG font and style menus' tick box in the General section. This takes affect in all Office applications but doesn't seem as reliable at preventing the caching problem.
4. Newly added fonts should still appear when you next start an Office application.
3. However you have Office set up, it can't see certain fonts. They are the ones logged to Console, e.g.:
12/04/2011 09:58:14 /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/fontd[21782] ATS Font family could not be created for Abaton ITC Std - Legacy Applications may not see this font -
FTP problem with LR3.2, OS X
I used to be able to upload Web galleries using the Lightroom 2 FTP client (Mac OS X Leopard 10.5.8). I tried using LR3.2 today and I get "An error occurred sending the file : invalid login". Which is nonsense, as I am using the exact same settings in Coda and it logs in just fine.
I have turned off the OS X firewall and have set Little Snitch to allow all.
From what I can find online, this seems to have been a long term problem with LR. Any solutions?
DNI have tried this and it is working for me...
If you're having problems with the App Store you might try this:
1 - enable the Debug menu in App Store:
open the Terminal application.
copy the command below and paste into the Terminal window:
defaults write com.apple.appstore ShowDebugMenu -bool true followed by Enter.
launch App Store, login.
2 - select the Debug ➙ Reset Application option:
3 - try again.
Also some users have found this method successfull in getting iPhoto to download: -
Problem with install TestDrive 2004 on Suse 9.1
I have problems with try install SAP NetWeaver 04 TESTDRIVE 2004 on Suse 9.1
The sapdb-db-files-7.5-2.i386.rpm say this.
error: unpacking of archive failed on file /sapdb/NW4/sapdata/DISKD0001;45e6dbc9: cpio: symlink failed - Imput/output error
The partition have 25GB free
I hope help
Best Regards
Alejandro.Natalia
the dbmcli -d NW4 -u control,<password> param_getvolsall not work, is possible ?
Suse-SAP1:/ # sdbregview -l
DB Analyzer /sapdb/programs 7.5.00.10 32 bit valid
Base /sapdb/programs 7.5.00.10 32 bit valid
Loader /sapdb/programs 7.5.00.10 32 bit valid
PCR 7403 /sapdb/programs 7.4.03.31 32 bit valid
PCR 7500 /sapdb/programs 7.5.00.10 32 bit valid
Server Utilities /sapdb/programs 7.5.00.10 32 bit valid
JDBC /sapdb/programs 7.5.01.00 valid
Database Kernel /sapdb/NW4/db 7.5.00.10 32 bit valid
PCR 7300 /sapdb/programs 7.3.00.46 valid
PCR 7301 /sapdb/programs 7.3.01.15 valid
ODBC /sapdb/programs 7.5.00.10 32 bit valid
Suse-SAP1:/ #
Suse-SAP1:/ #
Suse-SAP1:/ # dbmcli -s inst_enum
OK
7.5.0.10 /sapdb/NW4/db
Suse-SAP1:/ #
Suse-SAP1:/ # dbmcli -s db_enum
OK
NW4 /sapdb/NW4/db 7.5.0.10 fast running
NW4 /sapdb/NW4/db 7.5.0.10 quick offline
NW4 /sapdb/NW4/db 7.5.0.10 slow offline
Suse-SAP1:/ # dbmcli -d NW4 -u control, aksec param_getvolsall
Error! Connection failed to node (local) for database NW4: ERR_USRFAIL: user authorization failed
Suse-SAP1:/ #
Suse-SAP1:/ # dbmcli -d NW4 -u control,param_getvolsall
Error! Connection failed to node (local) for database NW4: ERR_USRFAIL: user authorization failed
Suse-SAP1:/ # dbmcli -d NW4 -u control, sapstar param_getvolsall
Error! Connection failed to node (local) for database NW4: ERR_USRFAIL: user authorization failed
Suse-SAP1:/ #
Suse-SAP1:/ # xinstinfo NW4
IndepData : /sapdb/data
IndepPrograms : /sapdb/programs
InstallationPath : /sapdb/NW4/db
Kernelversion : KERNEL 7.5.0 BUILD 010-121-066-665
Rundirectory : /sapdb/data/wrk/NW4
Suse-SAP1:/ #
Best Regards and thanks for helpppp
Very sorry, but my english is not good.
Alejandro. -
What is the EFI boot option for mac, and why is my Mac having problems with it?
I just updated my 2012 Macbook Pro to 10.9, and I am having some problems with it. I have a bootcamp partition on it and regularly awitch between mac and windows, and 2when I went to switch nack to my Mac side, It said EFI boot nstead of the regular Macintosh HD. When I choose that option, the aple logo comes up and progress bar appears. Once the progress bar finishes, the computer shuts off and doesnt do anything. When I turn it on again, it just starts the efi boot again and shuts off when it finishes. Why is this happening and what can I do to fix this. All help is extremely appreciated.
That usually happen because the OS X partition got corrupted. Abiotu the only fix for that is to reinstall OS X and to do that you might have to completely erase the drive or repartition it as one partition. Which will wipe out the Windows side. So backup everthing you can before you start.
nisuteng wrote:
Hi, did you fix the problem?
I have the same problem... and my warranty has expired...
please help~~
thanks!! -
Hi
I've got a mac pro late 2006, and i am having problem with it for quite a while now. the problem i am facing is the start up process, and the red light on the logic board. Earlier I've got the two led on the diagnostic leds 5 and 6 turned on without the diagnostic button being pressed, and i think those are related to the processors overtemp. I've managed to solve that by, removing the processors and re applying the thermal compound on the heatsink. what i have left now with is the red light on the logic board at the time i plugged in the power. At the same time when this light come on, the power indicator at the front panel come on as well. i am not sure what is this light relates to. We've replace the power supply too, and gone through the SMC reset but seems no help.
Any idea on the problem? I am desperate about it, and i will be greatful if anyone can help..
thanks and hope for your best solutions
KariI can't help directly with your problem but you might check here http://tim.id.au/laptops/apple/macpro/ for a service manual which could answer your question.
-
my mac pro got problems with the screen it loocs like too many square and vertical lines also it dosen't start recently i just change the hard drive an when I tried to instal the sistem operative it just started those problems can someone help me what can i do?
Which Mac? what year, what model, what speed, what size screen e.g., 2006 MacBook Pro 5,1 2.95GHz 13" screen
What graphics card, if you know it.
What version of Mac OS X, e.g., 10.5.5? -
AP 2700 - 2 MAC addresses - problem with joining to the WLC
Hi,
I had a problem with joining my new AP 2700 to the controller. I've found workaround but I would like to ask you if you know if this behavior is a some kind of bug or maybe feature :)
I have DHCP server which assigns IP address base on the binding MAC address with the IP address. Without binding, IP won't be assigned so I added MAC address from the AP sticker (MAC and SN number is on the sticker at the back of each AP) to the DHCP, connected AP to the switch port which was configured exactly the same way like other ports on this switch where older AP are working fine and.... nothing. IP address was not assigned. There was no DHCP request in the DHCP server logs.
During the investigation I've found that AP present 2 MAC addresses on the switch interface:
switch#sh mac address-table interface fa1/1
Mac Address Table
Vlan Mac Address Type Ports
11 58f3.54c1.2cb3 DYNAMIC Fa1/1
11 58f3.54c1.2cb4 DYNAMIC Fa1/1
The first one (58f3.54c1.2cb3) is a "sticker" MAC address but the second one (58f3.54c1.2cb4) is something new. Looking in to the DHCP logs I've found log that this second MAC address (58f3.54c1.2cb4) tried to get IP address but it was not possible because this MAC was not binding with any IP address so DHCP server refuse. I added this second MAC (58f3.54c1.2cb4) to the DHCP server, AP get IP address, join to the WLC, download software, reboot and ... this MAC address disappear.
switch#sh mac address-table interface fa1/1
Mac Address Table
Vlan Mac Address Type Ports
11 58f3.54c1.2cb3 DYNAMIC Fa1/1
Software I had on the AP before joining to the WLC was:
Version :
Cisco IOS Software, C2700 Software (AP3G2-RCVK9W8-M), Version 15.2(4)JB5, RELEASE SOFTWARE (fc1)
now I have (after downloaded from the WLC)
Version :
Cisco IOS Software, C2700 Software (AP3G2-K9W8-M), Version 15.2(4)JB6, RELEASE SOFTWARE (fc1)
Do anyone know what happen?(WLC1) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.6.130.0
Bootloader Version............................... 1.0.20
Field Recovery Image Version..................... 7.6.95.16
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
Build Type....................................... DATA + WPS
System Name...................................... WLC1
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
Redundancy Mode.................................. Disabled
IP Address....................................... 10.10.10.10
Last Reset....................................... Software reset
System Up Time................................... 25 days 2 hrs 53 mins 5 secs
System Timezone Location.........................
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... US - United States
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +44 C
External Temperature............................. +22 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 6
Number of Active Clients......................... 25
Burned-in MAC Address............................ XX:XX:XX:XX:XX:XX
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 25
(WLC1) >show time
Time............................................. Thu Apr 9 13:51:00 2015
Timezone delta................................... 0:0
Timezone location................................
NTP Servers
NTP Polling Interval......................... 3600
Index NTP Key Index NTP Server NTP Msg Auth Status
1 0 10.10.10.11 AUTH DISABLED
It's look like AP doesn't allow for console login or commands it just only show activity. After rebooting the WLC I get information:
Cisco IOS Software, C2700 Software (AP3G2-RCVK9W8-M), Version 15.2(4)JB5, RELEASE SOFTWARE (fc1) -
FTP Problems with Dreamweaver 8
The webmaster for the library I work for recently had
difficulty with her computer. She did a system restore from her
discs, and, after that, reinstalled Dreamweaver 8. She sent me an
email to let me know she needed my assistance setting her DW FTP
back up.
While her computer was down I decided to reorganize the
website files. There were dozens of old files and most of the
images and html were scattered throught the main part of the file
tree. She really liked the changes, but, after connecting her to
the site and downloading all the files, a problem arose.
Once she got her laptop back home every time she'd connect to
the FTP she got a group of folders named "Windows, Linux,
Speedtest" and a few others. I contacted our webhost and they told
me this meant she was logging in anonymously. We have our login
name and password in correctly, though, so this shouldn't happen.
No one at our ISP could help me do to them not being familiar with
Dreamweaver.
After playing around with the machine a bit I found that if I
deleted the site from the FTP and re-did it using the same folders
then the first connection was succesful. But, after disconnecting,
the same problem happens again.
I found this article and wondered if it could be causing our
problem.
http://kb.adobe.com/selfservice/viewContent.do?externalId=3491671c
The only thing that makes me think it might not be is the
fact that our login and password stays in the box, but, for some
reason, the FTP is connecting anonymously. Could her doing a
recovery have led to this? Maybe there's an update she needs to
apply that she didn't get after doing the recovery?It's hard to know what kind of things happened with your
moving stuff around
outside of DW.
Suffice it to say that most FTP problems are router/firewall
related. Does
this help at all?
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14834&sliceId=2
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"WesleyThomas" <[email protected]> wrote in
message
news:[email protected]...
> The webmaster for the library I work for recently had
difficulty with her
> computer. She did a system restore from her discs, and,
after that,
> reinstalled
> Dreamweaver 8. She sent me an email to let me know she
needed my
> assistance
> setting her DW FTP back up.
>
> While her computer was down I decided to reorganize the
website files.
> There
> were dozens of old files and most of the images and html
were scattered
> throught the main part of the file tree. She really
liked the changes,
> but,
> after connecting her to the site and downloading all the
files, a problem
> arose.
>
> Once she got her laptop back home every time she'd
connect to the FTP she
> got
> a group of folders named "Windows, Linux, Speedtest" and
a few others. I
> contacted our webhost and they told me this meant she
was logging in
> anonymously. We have our login name and password in
correctly, though, so
> this
> shouldn't happen. No one at our ISP could help me do to
them not being
> familiar
> with Dreamweaver.
>
> After playing around with the machine a bit I found that
if I deleted the
> site
> from the FTP and re-did it using the same folders then
the first
> connection was
> succesful. But, after disconnecting, the same problem
happens again.
>
> I found this article and wondered if it could be causing
our problem.
>
http://kb.adobe.com/selfservice/viewContent.do?externalId=3491671c
>
> The only thing that makes me think it might not be is
the fact that our
> login
> and password stays in the box, but, for some reason, the
FTP is connecting
> anonymously. Could her doing a recovery have led to
this? Maybe there's an
> update she needs to apply that she didn't get after
doing the recovery?
> -
FTP problems with CS5 - Help please
I volunteer helping charity and education organisations with their websites. One of my clients has just bought CS5 - I personally am still working on CS3 - so when I went to help them download their site first of all the set-up was quite different (why do companies fix things that aren't broken), but I got over that issue and managed to connect to the site, download and make a couple of changes. All was well!
Two days later I went back, because they were having problems and I couldn't connect to the server.... Well, when I was on the main Dreamweaver screen the computer said it was connecting and made all the right moves uploading files etc, but nothing on the website changed, so goodness knows where the files were going. When I went onto the screen showing local and remote files, on the server side there was just a message saying you can't upload unless you set up a control version and the little blue plug was just greyed out.
I don't want or need to set up a control version as it is just one person dealing with this site from one computer.
As this is the first time I have come across 'subversion' or SVN I am a little confused. I have sent an email to the hosting company to make sure it is not a problem with their server, but won't get a reply until Monday so I thought that over the week-end I would just ask all you out there....
Help!!DW is more than capable of managing your FTP tasks on its own. Please tell us - when you connect to the remote site and then LOOK at the Remote side of the Files panel, what FOLDER names do you see? As an ancillary question, what do you have in the Root Directory field of the Remote site definition?
-
Mac G4 Problems with "Application Launch Failure"
I'm not sure if this is the right forum for my questions, so if not, please LMK where I should be asking for help.
I have a G4 running Mac OS X 10.3.9. In the last two weeks, I have had a number of errors involving an Application Launch Failure. This started immediately after I had the foolish idea of shutting down my computer for the night to save power. I selected Shut Down from the drop down menu, the computer shut down and everything seemed ok till the next morning when I started up. Since that time, I have had the application launch failure problem with Word, Excel, PowerPoint, Graphic Converter, Yahoo Messenger, and assorted other programs.
The error message I get is for instance: Application Launch Failure The application "Word" could not be launched because of a shared library error:1<MicrosoftWord> <CarbonLib> <CFMPriv_CarbonCore> " or a variation depending on the program.
I have "restored" the computer, I have reinstalled Mac OS X 10.3.9, reinstalled the relevant Microsoft Office suite, and I still get the error message.
Does anyone have any suggestions (other than getting a new system)?
TIA for any help.
Ronnie WexlerBoot from the Install CD, but do not Install. Choose Disk Utility off the Installer Menu as your first action. Select your Hard Drive and choose ( Repair ). Repeat until it comes clean (or gets stuck). Then (Repair Permissons ) once.
-
OT: FTP problems with DW? Mention the Dreamweaver version
Hi all,
I request all of you to post the version of Dreamweaver when you post queries on FTP related issues. There were a number of bug fixes made in the 12.0.3 and 12.2 update, and it would be of value for the product team to know whether these fixes have helped resolve the problem, and any pending issues.
For users that have made it to these updates, use this post as a sounding board for problems you are still facing with FTP. Having these posts in one place will ensure that we have one link to capture this information.
Moderators and experts: Please request users for the version of DW when they post a query on FTP related issues.
Thanks,
PreranWhat firewall do you use? I would sooner think a setting on a
firewall got
changed somehow. I have had this happen to me from time to
time even though
I haven't changed anything myself.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner''s
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"pandrews76" <[email protected]> wrote in
message
news:et6lut$i61$[email protected]..
> Hi, I've been using Dreamweaver to edit and upload pages
via FTP for
> awhile
> now, but last night it quit connecting to my server and
I can't get it to
> connect or upload anymore.. when i try to upload a page
to my server, the
> "background file activity" window comes up and says its
connecting, then
> it
> says its "connected" but immediately another window
comes up saying the
> connection has been lost..
>
> I believe the problem is with DreamWeaver, and not my
server, because I am
> still able to connect and upload to the server with
FileZilla, with all
> the
> same FTP settings that are in my DreamWeaver..
> -
Dreamweaver 8 on INtel Mac ftp problems????
The basic setup: I have an emac, installed Dreamweaver 8 (actually the entire studio package), it works fine. I want to move our webpage to a new imac (intel). I've copied the files, installed Dreamweaver 8, done the set up for the site.
The problem is: I can't get the FTP connection to work. Whether I'm in the SIte Management section,the TEST part, or trying to connect (with the little electric plug icon), I get this message...a file activity window opens, "An FTP error occured -- Cannot make connection to host. Dreaweaver could not connect because the serve is down or not accepting connections."
Things I've tried: I've explored diligently the Adobe/Dreamweaver website.
I've deleted the Files for Dreamweaver, the web site files from the local host, I've tested the connection using other FTP methods (safari -- a test suggested by Adobe or FEtch); I read some of the posts here after searching for Dreamweaver/Intel items. The server is not down since I've been able to connect an upload from another computer; the computer does perform FTP using other methods...which I suppose I can do...but it makes an extra step.
I"ve tried using Passive FTP or not; I've tried everything I can think of...or suggested by outside sources (adobe, an instructor who teaches Dreamweaver, the Apple forums here); I modified the Hard drive name to eliminate spaces;
I've come to the conclusion it is more an "Apple" issue rather than a Dreamweaver issue.
I'm using the Dreamweaver on an emac and it works flawlessly!! But I need to use the emac for other purposes and set up the website on the Intel imac...
The Question: Any ideas or solutions or something to try????
Thanks for any help, suggestions, ideas. Cathy (working in an elementary school computer lab...)Yes--I've tried the "test" ftp address suggested by Dreamweaver; I've used fetch to connect as well as upload something.
I've connected to the server from another computer....
Thanks for trying but...the server seems to be functioning okay.
Maybe you are looking for
-
I can't download Adobe Reader or Flash on my HP TouchSmart 520 PC
Help! I have ask an IT support through Geek Squad and they couldn't figure it why i can download Adobe Reader and Flash
-
In which case we use FBRA (Reset Cleared Item)
Hi, Hello experts i am very confused about this transaction can any budy please make me cleare that In which case we use FBRA (Reset Cleared Item). Quick reply will be really very helpfull . Thanks In advance.
-
Microsoft NX-6000 Webcam and Arch Linux
I picked up one of these off ebay cause they looked pretty nice. I love the webcam, it has a great design. But it's turning out to be kind of a PITA to get working right. ATM, the only piece of software I can use this camera with is luvcview (yes,
-
Refernce field in sales n delivery
Hi All, Is there any relation between Sales document type VBAK-AUART field in the wb2_likp_lips2 (delivery) view, a similar reference field? Thanks.
-
Partial data fetched in report when scheduled in background
Experts, When I scheduled my report in foreground it displays all the data properly. But when I run the same in background, in the spool list it displays 260 pages whereas actually displays only 9 pages. The rest of the pages are not displayed in the