Mac mini 55" hdtv

Has anyone hooked the mac mini to a 55" HDTV?  If so how is the quality?

Current TVs max out at 1920x1080 pixels as that is the highest standard for TV and film (including Blu-Ray). Therefore a 50" TV at 1920x1080 will have pixels much bigger than a 32" TV also at 1920x1080.
Originally super large TVs of 50" or more did not exist for the masses and this was therefore not an issue. As TV sizes continue to grow this will become more of a problem. As a result manufacturers have started talking about and making a few samples of what they are referring to as 4K TVs. These have in theory a native resolution of 3840x2160 pixels i.e. double 1920x1080. As no broadcasts, discs (Blu-Ray) or even video games consoles support this high a resolution the only benefit is from pixel doubling and smothing aka. upscaling a 1920x1080 image just like previously standard resolution images have been upscaled to 1920x1080.

Similar Messages

  • Mac-mini with hdtv

    I have a new mac-mini and I have it hooked to my pioneer viera th-42px600u tv. The native resolution on the tv is 1024x768. I would love to use the mac to replace my dvd player and also use it to play videos. I have ripped some dvd's to vob and then used autoGK to convert to avi (using the xvid encoding). Couple things... First, I would love to just put the videos on my mac and use front row to watch them. But, I get no sound. When I open quicktime and play the file, I still get no sound, but I get a message saying I am missing a quicktime component and I can click on the link that takes me to a sight with the component I am missing. But, there are like 8 different components listed on that site, with no idea which one I need to get the sound. How can I figure out what I need.
    Second, the video quality is, well, not good. I have played around with the different resolutions and haven't been able to get anything that looks good. I can play the file on my pc using my flat screen monitor and I know that that isn't exactly an apples to apples comparison, I would expect that the quality of the video would be better than it is. I am using a DVI to HDMI cable to use the HDMI input on the tv. And, has anyone had any luck with video that has HD content? Also, even if I stick the DVD into the DVD drive on the MAC, the DVD player software won't even give me a full screen. That picture is ok, but it looks like I can only get a picture that uses about 70% of the screen area on the TV (where if I just use my DVD player I get a full screen picture).
    Any help with any of this would be greatly appreciated. I have found lots of old forums where people talked about having to download utilities to give the mini different resolutions, but that problem appears to have been solved out of the box (I even see a color profile named 'Panasonic TV' if I try to mess with the display stuff).
    Thanks in advance...
    Chris

    I did some research (yes, I decided to read the manual). My mistake was that I was trying to choose a resolution from the mini that closely matched the native resolution of the TV. The manual for the TV stated that if I was using the HDMI input, it only works for input resolutions of 480, 720 or 1080. So, I switched the resolution of the mini to 720 (instead of the 780 or whatever I had settled on) and it made a big improvement in the quality of the picture.
    Go figure. Who'd a thunk that the manual would have useful information...
    Hamish, I hope that helps.
    On an unrelated topic, I'm now in the process of trying to convert movies that I own and have presently ripped to VOB's into some other format suitable for playing in QT on the mini (I would love to just have .avi files or whatever sitting in the Movies directory and fire up Front Row and watch movies that way, instead of having to mess with the DVD drive). Any ideas? I have tried playing with autoGK, but it uses an encoding that doesn't match a codec in QT so I don't get any sound. I have played around with trying to install the DIVX codec, but that doesn't do me any good. Have you ever tried this?
    Chris

  • Mac Mini on HDTV.. Not Good

    I think i must be doing something wrong, because I've read other reviews and people were happy. I'm running a 1st gen mac mini.. and I have it hooked into my LG 32" plasma TV DVI-HDMI cable... at full resolution, everything is way to small to read.. then I bump down to 800x600 everything fits on the screen, but it looks really bad... hard to read, just gross... am i doing something wrong?? did I miss something that I should do??? please help, because the main reason I got this tv is so i could hook the mini into it...

    What is the native resolution of your TV, and from how far away are you trying to read it?
    (You might also want to pick the right Font Smoothing Style in Apple Menu > System Preferences > Appearance. This may be especially important if you are using a non-native resolution.)
    Many Mac programs allow magnification of their screen content, for example the Opera web browser and the beta of Firefox 3.0 -- if you need to browse from a distance.

  • Mac mini minidvi to hdmi does not display correctly new Panasonic TC-L37D2

    Hi,
    I have the 2009 mac mini (2.2GHz cor 2 duo nvidia 9400 256mb) and I recently purchased the Panasonic TC-L37D2 LED LCD tv. I use the mini dvi to dvi adapter with a belkin dvi to hdmi cable I purchased at the apple store to connect the mac mini to the tv. I cant seem to get the display to correctly fill the screen. When I select 1080P the top menu bar is out of view. Basically the desktop is larger than what is displayed on the screen making navigation difficult. I tried overscan but my screen then has black bars framing the entire desktop. Are there any updated display drivers I can try to fix this. I tried the third party software switchresx but I was only able to correct the vertical issue and not the horizontal issue (so the apple pulldown in the upper left corner is off of the screen). Why is it such a hassle to get this working? My buddy has a 42 inch Panasonic plasma and does not have any problems. Anyone know the correct switch resX settings at least? I see that Apple has added an hdmi port to the new mac minis but that just means I should have waited to buy mine. :/

    Read my post in Mac Mini to HDTV. A 3rd party utility called DisplayConfigX will allow you to create a custom resolution that will resize the Mac DVI/HDMI output to fit.
    It is annoying when that top menu bar is off the screen huh?

  • Mac Mini v iMac as Media Centre

    Quick question (sorry - being a pest today)
    I already have a powerbook G4 (which I'll upgrade in a year or so) but I was all set to buy a mac mini for use as a media centre with Front Row to play my DVDs, movie files, iTunes stuff etc.
    However, I'm just seeing that the iMacs are not that much more expensive plus they are higher spec.
    Is there any particular reason why I should pick the mac mini over the imac as a media centre (other than that it is cheaper)?
    I'm just thinking that it would be handy having the imac display on for running the main stuff in front row etc, then when I want to watch a video, I just play it on the second display attached to the iMac (ie my 32" LCD TV). I would leave th iMac running 24/7, never sleeping, with just the display sleeping, and set up EyeTV on the iMac etc.....
    Any comments?
    David

    Hello again! I have an Intel iMac set-up as my "media center" now. One thing to keep in mind about the iMac is the fact that it has a built-in screen. Front Row will only display on the "main" display (the display that contains the Dock and menu bar) if you have two screens. If you want your Front Row to display on the TV, it will have be the "main" display or it will have to "mirror" the main display. For me, with the HDTV and the computer only five feet apart, it's a little annoying to see the same thing displayed on both screens at the same time (with mirroring turned on) and the audio coming out from behind the TV (where the stereo is centered). I don't really want the Dock and menubar to appear on the TV and not the iMac's screen when I'm actually using the iMac as a computer and switching the two around got a bit frustrating for me.
    Both the DVD Player application and the EyeTV software can display the video on a separate screen, but Front Row has no preferences to change, so you can't tell it to display on the other screen. So, depending on your physical arrangement of the two screens, this may or may not be an issue for you.
    The Mac mini would only be able to have the TV as the display. As long as you're not looking to browse the Web and do e-mail on the Mac mini, an HDTV should make a very good display for your media. Mac OS X 10.4 allows you to turn on VNC sharing so you could download some free software to remote control your Mac mini from the PowerBook when you needed to do something that the Apple remote can't control. But, you will need a keyboard and mouse to set it up the very first time.
    So, if you're only looking for a media center and not a complete desktop computer, the Mac mini is a good option. The iMac should be able to handle the job well, but depending on your physical situation, you may or may not encounter some slightly annoying configurations. Since Front Row will be included for all compatible Macs when Mac OS X 10.5 ships, we might hope there'll be an update for Front Row that will allow you to select which screen Front Row displays on. But, that remains to be seen.
    -Doug

  • Isight camera for mac mini

    Looking to purchase a camera for my mac mini something along the lines of isight
    My current setup is mac mini to hdtv
    Camera is going to be mainly for FaceTime & Skype
    Looking for a camera that is compatible with mac mini and the OS X 10.8

    Hello, you'll need a Mic also, so I suggest these...
    http://eshop.macsales.com/item/Macally/ICECAM2/
    http://eshop.macsales.com/item/MacAlly/MEGACAM/

  • Mac Mini A1176 Audio

    Hello Everyone,
    I'm faily new to Mac world and I have a question about Mac Mini A1176 Audio to HDTV. I'm trying to make a HTPC and followed couple of guides online but I didn't get clear understanding of Digital Audio from Mac Mini to HDTV. I can configure the structure with stereo headphone to RCA but would like to know if there is a possibility to get digital audio. I have DVI to HDMI cable running from Mac Mini to HDTV but it doesn't give audio (as also stated by mac documentation). I would appreciate any response that could direct me to correct configuration of my HTPC with digital audio.
    Thanks,
    Pyraxic

    Only the newer Mac Mini's with a true HDMI output connection supports digital audio down the display cable.
    If your HDTV or Stereo Receiver supports Optical (Toslink) Audio input, then you could use a Toslink cable with a 3.5mm adapter on one end connected to the Mini's headphone jack. see > NewerTech CBLAOPTMT Toslink to Mini Toslink Optical... in stock at OWC
    If not, then you are limited to the current 3.5mm to RCA cable connection that you are now using.

  • Mac Mini DVi on HDTV - PROBLEM

    hey all,
    i am using a mac mini (1.42 G4 80gb 512 combo) on a sharp HDTV using a DVI to HDMI cable.
    everything works but i have a problem that it is slightly blurred, this makes text (especially small fonts) very difficult to read.
    is there any way to alter this or at least improve the visual quality?
    thanks anyone who can suggest.
    Dan Harris
    Nerox9

    i am using 1280 x 720 resolution, the other resolutions have the same blurred problem but it makes all the icons and stuff bigger.
    The tv / monitor is 26 inches.
    thanks

  • G4 Mac Mini with Toshiba CRT HDTV

    Hello all. I'm trying to hook up my Mac Mini (original G4 model) to my Toshiba HDTV (30HF85) using a Dvi to HDMI cable (DVI-D; a basic cable purchased from amazon). Unfortunately, I'm not getting any picture at all - just a black screen. I'm sure that neither the cable nor the hdmi port are faulty; I ran another mac (2005-6 G4 Powerbook) through the cable to the TV, and got a very clear picture. Likewise, the mac mini is still in working order, and connects with no problem to an any VGA monitor via the included DVI-VGA adapter. I have a suspicion that it has to do with the cable I purchased - it's Dual link. I've read in some places that this shouldn't matter, but in others, that this is a problem for older mac minis. Any ideas about what's going on here?

    Since you have two Macs, I recommend you try the following:
    • Hook up the G4 PowerBook to the TV and open Displays preferences on the PB and make note of the resolution in use that is giving a very clear picture.
    • Enable screen sharing on the mini (using a computer monitor if you have to)
    • With the mini connected to the TV, share its screen to the PB and from the PB you should be able to set the mini to the exact same setting that is working so well from the PB.
    About your dual-link question, I doubt that's the problem. HDMI to dual-link doesn't even make sense because and HDMI connector doesn't have enough pins to hook up to a dual-link DVI connector.

  • Mac Mini and Samsung 43" DLP HDTV  gets Black Screen Only

    Just bought a new Mac Mini with great anticipation for some large screen viewing.
    After numerous attempts the Mini has yet to produce anything but a black image with the occasional red or white horizontal line on my 43" Samsung DLP TV. Not even a brief grey start up screen. Just permanently black.
    Here's the kicker: I do get a great computer screen image on this 43" DLP TV in Mac OS 8.6 off my ten year old Macintosh PowerPC. (The trouble is it's a noisy older computer and has no bluetooth for wireless mouse & keyboard: and no Front Row with remote control)
    I have the VGA cable connected to the "computer in" port on the back of the Samsung DLP TV .
    This is with the exact same cable and connection that refuses to work with the Mini.
    Earlier attempts at using the DVI port were unsuccessful so for now I am staying with what works on the older Mac.
    Some other things I've tried:
    -with my Mini hooked up to a 17" CRT Samsung monitor I have tried all available resolution settings at 60 Hz, reconnecting to my large screen Samsung each time, producing nothing but the black screen.
    I've tried turning the TV on before the Mini and vice versa
    I always check to make sure the PC connection is selected on the TV
    As well, I have re-installed the OS onto the Mini to eliminate any possibility of a sofware conflict from data transferred from my Emac
    After consulting an Apple technical page (article 303406) regarding Black Screen issues and Mac Mini on large screen HDTVs, I went into single user mode and changed some text as specified. That did't help either
    So far I have never seen a grey startup screen at all, only a totally black screen.
    Someone in a recent post here or on MacMini.com touched on impedence issues with signals into VGA or DVI ports. The Mac Mini operates on low voltage. Could there be some connection to how strong a signal it produces compared to my old PowerPC with its ATI graphics card?? And just why would that make a difference
    I haven't seem my particular issue addressed in this forum or on MacMini.com
    Thanks for any help
    Mac Mini 1.83 Intel Core Duo 512 Mb Ram   Mac OS X (10.4.7)   Emac; 604e PPC with G3 Upgrade & ATI Video Card

    Just finished testing the Mini remotely with the use of the Redstone software recommended by BSteely in a previous post. Fun Stuff.
    I saw the Mini "desktop" on my Emac screen and could control it remotely, even though the mini was connected to the large screen Samsung.
    But the "fix" did not progress from there. When I called Apple for further help they were not able to help me tweak my Mini. Apparently there was nothing to tweak.
    A second level Apple technician finally told me (after a few calls to both Apple support and Samsung) that this Mac Mini is likely not capable of producing a screen image on my large screen Samsung.
    He said the Mini supports "Coherent Displays up to 154 Megahertz and Non Coherent displays up to 135 Megahertz". On his recommendation I checked with Samsung (second tier) and they are not sure exactly what that means. Same here.
    Samsung did reply that the "pixel clock (of this HDTV) is 74.2 Megahertz". Again, too technical for me.
    The latest second tier Apple guy just told me said that my Samsung 43" DLP is probably not compatible with the output capability of my Mac Mini.
    Bottom line
    It's all about the output capabilities of the Mini's "Intel Extreme Graphics GMA
    The Mini's video output is not upgradeable like the other mac which works with this HDTV.

  • Mac Mini behaves poorly through DVI at 1920x1080 on HDTV displays

    I recently purchased a Samsung LN-S4695D - a 46" LCD TV capable of 1080p with HDMI and VGA inputs. I've had been using my 23" Cinema Display + a Mac Mini G4 + Rotel Amp as the centerpieces of my Home Theater, and decided to change out the display to accommodate a gaming system and perhaps some other digital or component inputs (and, of course, nab a larger viewing surface). It seems like a fairly standard use of the Mini, but unfortunately many of us are running into disappointing results using our Minis as connected to an HDTV display. I'm writing here to see if we can clear up the issue with the mini and to attempt to identify reasonable workarounds or solutions until Apple gets the Mini right for HD home theater.
    The current problem with the Mini and the Samsung TV/Display is that when the Mini is connected via DVI-HDMI (with a Monster 400 2m cable) to the display and asked to run at 1920x1080 (60hz NTSC) it does a reasonable job until it is required to refresh a lot of pixels (scrolling through album art in iTunes, playing DVD or other video, etc.). At that point, the screen fills with bands of static, and (if the rate of change is sustained) eventually looses the signal all together. With heavy scrolling operations, the signal returns as soon as scrolling stops, but with full-screen video it usually stays out until the mac resets its video resolution. Another article shows examples of this "DVI static" here:
    http://www.freewebs.com/themagius/minidvipics.htm
    So it is clear that the Mini and HDTVs don't play well at 1080 resolutions, as many of you have attested to. The samsung seems to do a better job than most with the Mini in that it it actually renders the 1080 as well as other resolutions, but flakes out on fast updates. While some other resolutions are also problematic, it is important to note that 1280x720 runs flawlessly on the Samsung, and is currently how I have mine set up (VGA input was too disappointing compared to DVI, though it scanned great and fit the image w/o over/underscanning.). Also, my Powerbook G4 1.25ghz (older than the mini) powers the Samsung perfectly at 1920x1080 as a secondary display, running DVD video or anything else that I throw at it, which leads me to believe that the mini is the problem. Here is another story very similar to mine that reports almost the same results with a Sharp LCD panel:
    http://www.avsforum.com/avs-vb/showthread.php?p=5940932
    So I've three sets of questions for Apple and the rest of you on this forum:
    1) Why does the Mac Mini underpeform with the LCD display? The Powerbook works great, and the mini works great with my Cinema display (also 1920x1080) - where is the disconnect between the Mini and the Samsung? I understand very little about the actual details of DVI signals being carried across the wire, and don't understand what would cause the Powerbook to succeed, but the Mini to falter.
    2) Assuming the Mini video hardware is at fault, has Apple improved this with the new Core 2 Duo line? Has anyone had success where previous Minis or other Apple hardware failed at 1080? If not, is there any announced intention to make the hardware that is positioned as being most ideal for the living room (ie, Mac Mini) actually DVI/HDMI-compatible with the finest HD living room devices?
    3) An unfortunate sideffect of the DVI connection to the TV is that it requires the image from the Apple device to be oversanned (about a menu-bar's worth of pixels disappear on each edge) or underscanned (2" of black space around the image). Is there a common industry standard to correct this? Who is managing the overscan - the TV or the Mini? Also, can any utility, such as ScreenResX correct this until Apple manages to build in correction options into the OS for their living-room devices?
    Thanks for all the help! Hopefully we can outline clear answers here in this thread for everyone else having similar problems.
    Mac Mini G4 Mac OS X (10.4.8) Samsung LN-S4695D, Monster 400 DVI-HDMI 2m cable

    David,
    Great post. There's a lot to digest here. Let's get started!
    The first question relating to noise, or static, over a TMDS (DVI) connection has to do with with the interoperability of various TMDS transmitters and receivers and how they are implemented. At this point in the market place there are thousands of combinations of transmitter/reciever pairings and obviously some are working better than others.
    If you were to observe a TMDS signal with a scope there is something called the "eye" which is framed by the swing voltage and the bit time. When the eye collapses and is encroached upon, digital noise is the result. The noise margin is degraded by higher bit rates. That is why the mini and your TV are working at 720p but failing at 1080p...because the dot clock is that much higher for 1080p. The solution for cases such as this is to build a custom 1920x1080 timing that has reduced blanking, which allows for the lowering of the dot clock. Generally you can lower the dot clock sufficiently to get the noise to stop. LCD displays are relatively immune to reductions in blanking time so you can squeeze a lot out of a timing that was designed more with a CRT in mind.
    To answer your second question, you can't fairly say the problem is with the mini. When you consider TMDS compatibility between two devices you have to take a whole system view. This includes not only the transmitter (mini) but the transmission line (PCB traces from the TMDS transmitter inside the mini to the mini's DVI connector -> the cable -> PCB traces from the DVI connector on the TV to the TMDS receiver in the TV), and the receiver. All three have to work together to make things come out right. You could probably just as easily find a display that works well with the mini that doesn't work with your PowerBook. It can be really had to pin the blame down to one device except in the most obvious cases where a certain device seems to be incompatible with just about everything. But I don't think the mini can be labeled that way. Compatibility is definitely an issue the industry still struggles with, especially at the higher clock rates approaching the 165MHz TMDS speed limit.
    As for question 3, overscan is being forced by the TV, not by the mini. And, no, utilities like SwitchRes X and DisplayConfigX cannot be counted on to reliably deal with this except in the case of pure analog displays with magnetic deflection systems (e.g. old TVs and monitors). Once you have a digital processor involved and a matrix addressed display, tweaks to porch timings and blanking and such do not have predictable results. It seems to work in some cases but it is basically voodoo when it does. Purely luck.
    If you want, I can help you to build a reduced blanking, 1080p timing that will most likely eliminate the DVI static. But you'll still be stuck with overscan. I should point out that a lot of manufacturers are starting to "get it" with respect to the public's desire to attach computers to their hi-def LCD televisions. I see a real shift in 2006 models. I believe the current crop of FHD (Full HD; native 1080) LCDs from the three "S" companies (Samsung, Sharp and Sony) all can display 1080p bit-for-bit now, meaning no overscan. So at least that is changing for the better. Write back if you want help with the timing.
    Cheers. And thanks for starting this great thread.

  • Mac Mini HDTV

    Have 2005 Mac Mini with DVI-I connector. Have a 2009 Toshiba HDTV 15" with component, composite and S Video connections. Have found DVI-I to component adapter thru amazon.com. Will the Mac Mini video card support that configuration? What's my best bet? Component adapter or buy Apple's DVI to Composite/S video and add cable?

    Toshiba 15LV506-T
    User Manual http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=SB&os=&c ategory=&moid=2805126&rpn=undefined&modelFilter=15LV506-T&selCategory=2797337&se lFamily=2797340
    There is a picture size menu - Theatre Wide 1 seems to be the best setting for the computer, but of course its contrived and stretches the sides, looking unnatural. Also, when you switch between video (the S video from Mac Mini) and television, it doesn't save the settings.
    I clicked on the green resize function in Safari and its all screwed up. The images of the web pages are displayed way off to the right. You can drag your way to the images but can do little else. This is my father's set up and trying to add "resize" to bookmarks bar but can't remove any to make room. "open book" doesn't appear on bookmark bar.
    Firefox acts fine.
    Thanks for your help.

  • Mac Mini Doesn't Display through Philips Tube HDTV

    I have a Philips tube HDTV with a VGA connector in the back, and used the DVI-VGA connector that came with my new Mac Mini to connect. I don't have a computer monitor at home. The TV doesn't display anything.
    So then I took the Mac Mini over to a friend's. He has a VGA monitor, and so he ran the Mac Mini through setup and set it to the lowest possible display settings. I came back here, rebooted and plugged it back in; still no display.
    Then I tried this:
    "First thing to try is to boot the mini into safe mode by holding down the shift key as it boots up. This should allow it to boot, and then give you access to the display preference pane to adjust the settings back to those that worked.
    If that doesn't work, try disconnecting the TV, and rebooting the Mac with no display attached. Once it has fully booted and enough time has passed to allow the desktop to be displayed, reconnected the TV. This should force the mini to boot into a low-res mode that works with just about anything, then when you reconnect the display, either cause it to auto-sense the correct resolutions, or give you access to display preferences."
    This didn't work either. Any suggestions?

    Hi Alan,
    Check your TV manual to see what resolutions your VGA/RGB connector on your TV will accept. Being a HDTV it is likely to be from 480p to at least 1080i.
    You then set the resolution in your Display preference pane to 640x480 and you should get a picture on your TV. The trick is to set it when you can't see anything! Attaching to another device may not help because the Mac detects that device when you set the Display and will know its not that when attached again to your TV. When attached to your TV it is setting another resolution it thinks will work. It is clearly guessing the wrong screen resolution when you do connect it.
    I overcame this situation myself using a VNC client. That requires you to have another computer you can use to control your Mac Mini via VNC. You can then access the Display pane via VNC and set the 640x480 resolution which will work.
    For setting 1080i (and the VNC process) please see:
    http://www.macosxhints.com/article.php?story=20060319073027371&query=1080i%2BMac %2BMini
    I am guessing you can also use an S Video adapter - available from Apple - to connect to an S Video port your TV may also have. That won't help with the VGA connection though.
    Hope this helps.

  • How can I move my itunes movies from my iMac to my mac mini which is serving as a media server attached to HDTV?

    I want to move my itunes movies from my iMac to my Mac Mini, which is hooked up to my HDTV, so that I can save space on the iMac and use the direct source Mac Mini to view the iTunes movies that I purchase and download.  Can anyone give me ideas on how to do that?

    iTunes does not have provision for automatically storing one kind of media on a separate drive, so you have some basic decisions to make first.  Do you want these movies to still appear in your iTunes library, or are you content with browsing filenames on a drive in Finder when you want to look for one?  The second's the easiest thing because then you don't have to have an external drive permanently turned on and attached to your computer (wired or wireless).  To do that you literelly only need to drag your movies folder to an archive drive and delete movies from iTunes.  To watch them again you can add it back to iTunes while holding down the option key so the movie is used from its location on the external drive.
    There's ways to move the movies to an external drive while keeping them in iTunes but the external drive iwll always have to be turned on and connected to the computer or you will see a bunch of broken link exclamation marks.
    Realize what you are talking about is not "backup".  Backup (which you should do) is putting a second or more copy of items on external drives for the day when your internal drive fails and everything on it is lost, inclduing all your home photos and perhaps things that have been pulled from the iTunes Store and can no longer be re-downloaded.

  • Having trouble using a Samsung LCD HDTV with my new mac mini...help?!

    I have a brand new mac mini running snow leopard. I am trying to use a samsung HDTV (1080i). I've got the display connected and it is working but the font on the windows is not very crisp at all...it is actually hard to read. I've adjusted the resolution in my settings to all the different options. When I use the 720p option the font gets a little better but the windows are HUGE, when I use 1080i the windows shrink to the correct size but the font gets worse. Anyone have any ideas?

    Be sure to designate the HDMI input on the Samsung TV as a 'computer' source. This seems to help how it presents the image on the TV. The other thing to adjust is the font smoothing settings, via System Preferences > Appearance.

Maybe you are looking for