Mac Mini won't remember display profil after sleep

Hello! I'm posting this for a friend who experiences issues with its new Mac Mini.
The system won't keep its display profile setting when waking up from sleep. My friend have to go to System Preferences to select the right display profile manually, each time.
The display is some 17 inches CRT most probably connected by a VGA plug.
Any idea?

Clif
It could be the FW disk is not mounting early enough. Did you try holding down "Option" at startup, the using the Startup Manager to select the disk?
See Startup Manager: How to Select a Startup Volume. You may need to wait until the scan finds your FW disk.

Similar Messages

  • Mac Mini won't recognize CD's after installing Leopard

    I keep having to do a restart to get my mac mini to recognize CD's for importing into iTunes. I insert a CD it spins - it temporarily see it in iTunes (less than 1 sec - more of a 'flash') then thats it. I have to restart in order for mac or iTunes to see CD. Other than that, Leopard install seems to work fine.

    Same problem here, on certain CD's only. Most CD's work fine.
    Upon inserting the CD, iTunes will open, the CD will show up as an icon in iTunes for a split second, and then disappear. The CD does not appear on the desktop. CD can be ejected with the eject button on the Apple keyboard though.
    When I change system preferences to ignore CD insertion, the CD mounts fine and shows up in iTunes.
    This has been happening since installing 10.5 and several different versions of iTunes.
    The same CD that won;t work on 10.5 works fine with my G5 PowerMac running 10.4.8 and iTunes 7.0.2.
    This appears to be an OS 10.5 issue, then.

  • Mac Mini won't start with scheduler after power loss

    Hello,
    I have a Mac Mini here. It is configured to start at a certain time (say 1:00 AM). In the evening I shut down the Mac Mini and power off the socket where it is connected. In the morning I switch on the power socket and the Mac Mini is not starting.
    When I do the same thing with an iMac everything works. The iMac will start because he missed the 1:00 AM.
    I checked this with the current Mac Mini MC815D/A: here it works again!
    So, what is wrong with my Mac Mini? I have this model:
    APPLE #MAC MINI 2.4GHz (MC270LL/A)
    Model No: A1347 (EMC 2364)
    Model ID: Macmini 4,1
    Can this be verified my some other user?
    I use the latest firmware, and this behaviour shows up on several OSes (Snow Leopard, Lion and Mountain Lion)
    Best regards
    Matthias

    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions,  then move these files to the Desktop.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
    /Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
    (Then Trash the original of these last two, as "moving" them only copies them.)
    Then reboot once more.

  • Mac Mini 2014 Oct cannot wake up after sleep

    Mac Mini 2014 Oct Version, cannot wake up after sleep by typing on keyboard or moving mouse (both hardwired USB) if external HDMI screen goes to sleep mode too (usually after 1 min if no signal coming from the MAC). To wake up, I ust turn off and turn on the screen and keep typing on the keyboard. I already checked "prevent computer from sleeping if display goes to sleep". But does not help. This is very annoying. I now try to set the sleep timer to more than 1 hour. Wasting my energy and not helping. I tried connecting my HDMI screen to a HDMI to mini-Display port adaptor cable, then plug into the thunderbolt port of the MAC. Same issue, no improvement.

    I may know whats going on with the wake from sleep issue. I have a Mac Mini 2012 but this  fix (see below) should work on any product running 10.8.2 Mine is at 10.10.1 and it worked.   First off you can tell if your Mac Mini is in sleep mode by looking at the small light on the front of the Mini. If its pulsing... going from bright to dim its in sleep mode. If you put your Mac in sleep mode, or it goes into sleep mode it will wake from sleep BUT ONLY for the first 4 hours. After 4 hours it will go into what is known as "safe sleep".  The light on the front will be off and you won't be able to wake your Mac. The only way to wake the Mac when in safe sleep is to hit the power button and then wait a minute or longer as your system will need to pull the data from the disk and load to ram. This is causing the issue where its not waking from sleep. You can move your mouse or hit the keys all you want but it won't wake from sleep. This is a real pain as you have to press the power button on the back of the Mac mini and wait for the system to come out of its slumber.   Here's what Apple says:
    With the release of the OS X Mountain Lion v10.8.2 supplemental update 2.0, a new feature was introduced to enter safe sleep after four hours of the computer being connected to AC power. This is an effort to comply with the European Energy Standards (ErP Lot6). This will only occur if there is no wireless or Ethernet activity and no activity from external devices such as USB storage devices. This is normal behavior for the following models:
    MacBook Pro (Mid 2012 and later)
    MacBook Pro (Retina, Mid 2012 and later)
    MacBook Air (Mid 2012 and later)
    iMac (Late 2012 and later)
    Mac mini (Late 2012 and later)
    I have found a fix that puts an end to this nonsense..... Go to the Mac terminal (Google if you don't know how or youtube) and run the following commands (Very easy to do and if a novice like my self can do you can for sure)
    1. When in the terminal mode type:
    pmset -g          This will show your current configuration of your sleep, hibernate, etc You may want to print so you can restore these values if needed.
    2. Change your standbydelay to  86400    86400 is number of seconds which is 24 hours. Here’s the command:
    sudo pmset -a standbydelay 86400
    3. Change autopoweroffdelay to 86400  Here’s the command:
    sudo pmset -a autopoweroffdelay 86400
    4. At last but not least change autopoweroff to 0   Here’s the command:
    sudo pmset -a autopoweroff  0
    Run pmset -g to verify your setting have changed.  I rebooted my system and checked again to make sure.  Since I made the changes no more going into Safe sleep!!! You can change the values to what you like. I used 86400 secs. (24 hours)  I hope this helps!

  • Mac Mini won't boot - displays white screen

    I just bought a new mini, core duo, and set it up today. Everything was working fine, and I followed the instructions to update 9 applications from Apple.
    I also installed a wireless keyboard/mouse MS Desktop 1000.
    Everything worked great until the reboot. Now the fan turns on, the power light turns on, the startup chime sounds, but the display is only white. It doesn't appear to be doing anything.
    I've tried restarting several times, I've disconnected everything (well, not much to disconnect, display, usb, power)
    Any ideas?

    Try starting you mini in Safe Mode…
    http://docs.info.apple.com/article.html?artnum=107393
    … to see if you can get it to start. I think it might have been a bad software installation that's done it. More than likely it was the keyboard and mouse.
    If you can get it to start the first thing I would do is to try and repair you disk permissions (Disk Utility in your Applications > Utilities folder).

  • Mac Mini won't start after installing OS X 10.6.3

    My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

    If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
    I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
    Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
    So, following the above guidelines, reinstall 10.6.3.

  • Mac Mini won't boot after failed XP installation

    Recently upgrade HD to 320GB 7200 rpm and 3GB ram. Running 10.5.8 fine.
    I tried to install Windows XP through Boot Camp, but wasn't successful, I terminated the installation. Then Mac Mini won't boot up. When powered on, you heard the chime, then grey screen showed and stayed. Tried starting with "C" (boot from CD), "OPT" (boot option), "T" (target), and reset PRAM. None of them worked.
    What should I try next?
    Thanks
    Message was edited by: Yijian Cao

    If you install XP on Bootcamp, your startup disc will be changed to XP Windows partitioned you did. To restore your startup disc back to Mac OS, make sure your Mac is turned off. 1. Plug the power back and press the power button ON. When you hear the power On sound, press and hold the ALT key on your keyboard until you see the hardrives. 2. Select the HD that says MAc OS, then your mac will boot back to Mac OS.
    Let me know if you have more problems, maybe I can help.
    Abel

  • My Mac Mini won't get past the initial startup screen with the Apple logo. What can I do?

    After a long distance move, my Mac Mini won't startup past the logo screen. What can I do?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
         a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, boot from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.   
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Mac mini won't boot anymore

    My Mac mini won't boot anymore. It's been running fine for months.
    It's running Leopard Server 10.5.2 Build 9C31
    It starts to boot, I get the first spinning gear with the gray screen, then the blue desktop blinks, then a second spinning gear on a gray screen and it appears to hang (the gear stops spinning).
    I booted off the install DVD, ran disk utility, repaired the HD, repaired the permissions: the behavior is the same.
    Safe mode doesn't work (same hang as above).
    Single user mode does work.
    I can connect to it via Server Admin while it appears hung.
    The last few lines of the system log are:
    May 15 18:38:58 server emond[67]: SetUpLogs: uid = 0 gid = 0
    May 15 18:38:58 server emond[67]: SetUpLogs: opening /Library/Logs/EventMonitor/EventMonitor.error.log
    May 15 18:38:59 server kextd[23]: writing kernel link data to /var/run/mach.sym
    May 15 18:39:09 server KernelEventAgent[59]: tid 00000000 received unknown event (12)
    May 15 18:39:20 server kernel[0]: display: Not usable
    May 15 18:39:20 server com.apple.KerberosAutoConfig[126]: Kerberos configuration is up to date
    May 15 18:39:20 server com.apple.ATSServer[125]: FODBCheck: New annex file created
    May 15 18:39:21 server ARDAgent [130]: ******ARDAgent Launched******
    May 15 18:39:21 server com.apple.KerberosAutoConfig[132]: Kerberos configuration is up to date
    May 15 18:39:22 server ARDAgent [130]: call logout from LoginLogoutProxyCallBackFunction
    May 15 18:39:22 server com.apple.launchd[1] (com.apple.RemoteDesktop.agent): Throttling respawn: Will start in 9 seconds
    May 15 18:39:24 server loginwindow[58]: Login Window Started Security Agent
    May 15 18:39:29 server servermgrd[53]: servermgr_calendar: created default calendar virtual host
    May 15 18:39:31 server ARDAgent [146]: ******ARDAgent Launched******
    May 15 18:39:32 server ARDAgent [146]: ******ARDAgent Ready******
    May 15 18:39:33 server mdworker[109]: (Error) SyncInfo: Boot-cache avoidance timed out!
    May 15 18:39:54 server Python[47]: CGImageSourceCreateWithData data parameter is nil
    May 15 18:39:54 server com.apple.wikid[47]: Thu May 15 18:39:54 server.jeff.carpenter.name Python[47] <Error>: CGImageSourceCreateWithData data parameter is nil\n
    May 15 18:39:56 server kernel[0]: AppleYukon2 - bad packet received. length: 1440, packet status bits: MII error
    May 15 18:39:56 server kernel[0]: AppleYukon2: 00000000,00000001 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
    May 15 18:49:54 server kernel[0]: serialnumberd 194 FSWRITEDATA SBF /dev/dtracehelper 13 (seatbelt)
    May 15 18:49:54 server kernel[0]: serialnumberd 194 FSREADDATA SBF /dev/autofs_nowait 13 (seatbelt)
    May 15 18:49:54 server kernel[0]: serialnumberd 194 FSREADDATA SBF /usr/sbin 13 (seatbelt)
    May 15 18:55:12 server kernel[0]: AppleYukon2 - bad packet received. length: 23, packet status bits: MII error
    Any ideas?

    Yes, it's been running Server since I purchased it.
    I doubt the serial number is in use elsewhere: I purchased the 10-user version at a retail store in a sealed package and I've only installed it once.

  • Mac Mini and the Dell Display

    Has anyone ever used the Mac Mini with a Dell Display? Specifically, the Dell SP2309W. If so, how well the two work together? Thanks in advance!
    http://accessories.us.dell.com/sna/products/Displays/productdetail.aspx?c=us&l=e n&s=dhs&cs=19&sku=320-7641

    I bought one of these when they first came out. It's a nice monitor but the camera has been a bust. It just won't work reliably. Maybe the firmware has been improved since when I bought mine. But if you care about the camera and mic working, you should investigate further to make sure it's working better than it is on mine.

  • Mac Mini won't start and constantly makes disc ejecting noise

    My Mac Mini won't start. It was working fine, then just locked up and won't start again. When I push the start button it just makes this repeated disc ejecting noise from the DVD drive. It doesn't make the chime noise or display anything on the monitor. I've disconnected the optical drive, but it didn't help. Then it just doesn't start at all. I thought that if I would disconnect the optical drive, that it would ignore it and just boot off the hard drive, but nothing happened. The power light comes on. Then, if I hold down the power button for 10 seconds it shuts down. The fan operates. It just never attempts to boot up. I can't put in a system DVD because the optical drive is just in eternal eject mode.
    If you have any suggestions let me know. Thanks.

    I have the same situation.
    I think the drive thinks it has a disc to eject or part of the mechanism is stuck and can't return to it's resting position. I was going to disconnect as you tried but now I think I'll try to disassemble the drive to see if there might be some debris jamming things up.
    Please let me know if you solve the problem.

  • 2010 Mac Mini won't sleep

    Hello, everything was working fine until I accessed my mac mini from my old iMac G4 to share some files. Now my new Mac Mini won't sleep. Here is what I have done. Ejected the Mac Mini on the iMac. Turned off the iMac, stopped sharing everything on the Mac Mini including files, my printer and iTunes media and reset the PRAM. Still the Mac Mini won't sleep. It's set to it's defaults of 10 minutes to sleep the monitor and itself but only the monitor goes to sleep after the 10 minutes. Very frustrated...

    Hello Euchre and thank you for replying. I have unchecked all the boxes within the "Sharing" options that I checked some time ago. When I did that, sharing was automatically turned off. Still I am having the issue. I'll try putting the monitor at 9 minutes and the computer at 10 to see if that works. I'll be back. Thanks again, Ed

  • Mac mini won't connect to my wireless router!

    I just bought my mac mini server then connected it to wifi, then after 2 weeks I had to go abroad for a week so I just turned off the switch connecting to my mac, without switching off my mac mini server. then when I get back home my mac mini won't connect to my wifi. I tried everything from manually setting up IP and DHCP nothing works. What happened?
    thanks for help,
    Jakarta

    I didn't reset the machine/router itself because 2 of my computer is still connected to wifi-and working perfectly, but the mac mini server cannot connect to wifi.
    what I did was to set up the "networking utilities"-having said that, what I did was to connect all over again to wifi, this did not work. I did tried to change from DHCP to manually set up IP, neither of these didn't work.
    I'm now stucked!
    Message was edited by: asea

  • Mac Mini Won't Power On -- power light on, nothing else

    I will ask this again, since noone bothered to respond to my question before.
    I applied the SMC reset many times. This time it happened I did not put the Mac to sleep -- I shut it down last night. This morning the problem is back and the reset no longer works.
    This is a brand new Intel Mac Mini, which marks the third Mac that I bought that doesn't work properly straight out of the box that I bought. I must be an idiot for expecting quality out of Apple. Genius bars at local stores have their reservations booked up and won't accept any new ones.
    What I'd like to do is -- either someone point me to a permanent solution that I can apply myself or I'd like to walk into an Apple Store and swap the Mac for a brand new one that works.
    Any thoughts ?

    This is (almost) strictly a user-to-user support site, and though very rarely an Apple staffer may post helpful information, it is not as a formal contribution from Apple, but merely as another user trying to offer some assistance.
    Unfortunately in your case, while there have been some reports of similar behavior in other Mac minis, there has not been any clear solution found - which is why I suspect you haven't had any helpful responses. The SMC reset procedure has been suggested for this in the past, and has occasionally worked, as it appeared to do for you that one time, but generally it appears not to have helped. Indeed, the fact it didn't resolve the problem in your case after that first time suggests that it may only have been coincidental that it seemed to have worked.
    There are really only a couple of possible causes as I see it. Faulty memory can cause the sort of failure to boot you describe here, and could also be complicit in wake from sleep issues too, and it's possible an external device could be causing problems too. You might try and boot with nothing connected to see if that helps, but in the broadest sense this sounds to me like a hardware failure. Macs (not just Mac mini models) do occasionally suffer wake from sleep issues, often the result of peripheral devices, but this would not be expected to also affect system boot up. Indeed, should never do so.
    Typically, if done correctly, an SMC reset either works first time or not. Doing it multiple times means it isn't the solution - as you have found. It may be that your system is suffering a dead internal battery (some Mac models simply fail to boot with symptoms similar to yours) with then internal battery fails, but all in all I think Apple need to look at this problem and try and resolve it, because even if there appears to be a solution in some user-initiated procedure such as an SMC reset, unless the actual fault is known, there can't be much confidence the problem will not return at some point.
    Please let us know what Apple say - I suspect they'll have you run through the usual array of troubleshooting tests, and then want to start replacing components such as the logic board, but it will be interesting to know what they decide.

  • My mac mini won't back up to my Seagate external drive but can read the information on it. Can i back up to it at all?

    My mac mini won't back up to my Seagate external drive but can read the information on it.
    Can i back up to it at all? and how do i do it?
    Simon

    I suspect the Seagate is not formatted to be used with the Mac. The correct format would be Mac OS Extended (Journaled), if you just bought the EHD then almost certainly it's formatted to be used with MS Windows machines. This is easy to fix, here are instructions on how to format it:
    http://pondini.org/OSX/DU1.html
    After formatting Time Machine http://support.apple.com/kb/ht1427 will launch and will begin backing up. The first backup will take some time however after the first backup it will go pretty quickly.
    NOTE!!!!!!!!!!!!!!! After formatting all data will be erased, so please if you have data on that move it to the internal HD first and then format. Then once you have backed up you will have a backup copy of the data. Also NEVER EVER use a backup disk to be used to store data. The reason being is if that drive crashes you have not only lost the data you have lost it's backup!!!!!!!!!!!!!!!

Maybe you are looking for