Mac user problems with LR5

I cannot find my 'Noise' slider on my Mac in LR5. Please help!!

Right click one of the panel headers such as basic and check Detail back on.

Similar Messages

  • I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...????

    I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...???? In the box with the disk came the product key, have put it in and it doesnt work. Please help..x

    unfortunately - you can not.  you can't even buy outlook by itself at microsoft's own website.
    does it have to be outlook?  maybe you can get away with using something else that's outlook compatible.
    how about trying Thunderbird for Mac OS?
    or maybe you can call apple and let them know you purchase the wrong version - they might give you a break and just pay the difference for the home and business version.
    good luck

  • Problems with LR5.7

    At the moment I’m having problems with LR5. Hopefully someone could help me…   
    When I’m in the ‘develop’ module I can’t see the changes I’ll make in the screen.
    For example; when I would like to crop an image the complete image appears in grey and I can’t see the image anymore.
    For example; when I would like to change the lightening from the picture, I can’t see the change I would like to make. Not on the screen and not in the navigator.
    I’ve already reinstalled LR and installed it again, but the problem still isn’t solved.   
    Could somebody please help me?! Many thanks in advanced!!! 

    The video card in your computer has a driver (which is software that allows it to operate). Depending on your computer and what video card it is, you would have to download the most current video driver and install it so that the problem can possibly be fixed.
    You have to look at your computer's specifications and determine what video card is used. That will determine how to find the most current driver.

  • Lightroom 5, Mac. Problem with the Radial Tool. Marquee Lines disappear.

    Lightroom 5 Mac. Problem with the Radial Tool. I use this tool a lot. I must have hit a hot key by accident because between photos the marquee lines have disappeared and i don't know how to get them back. Without the marquee lines there I cannot rotate or expand the radial tool.

    I have attempted to uninstall, empty trash and a fresh download from Adobe. The problem is still there...

  • NEW Macbook user - problems with Flashdrive USB file transfer

    Hi, I hope someone can help me. I am a new Mac user, I have just started with a macbook and the latest Leopard software. I have a problem in that I save my Word docs (created or worked on with Office for Mac) on a flashdrive/USB pen and then take the pen to college where I work on the word docs on a Windows XP system. When I open the USB drive I have 'ghost' files on there which don't appear on the USB when inserted in the Mac. They are either temporary files of the ones I worked on or are named ._.TemporaryItems and .-.Trashes. So far I have just deleted these. I'm worried that they are required for something on the Mac and although the files aren't large, around 4KB, I don't really want them on the USB incase they damage the other files. I'm working on a huge thesis right now and can't risk any files being damaged. I rang customer support and was told to format the USB, update the Pages software (even though I said I was using Office for Mac) and that there might be a virus on the USB. After all that i still get these same temp files appearing. Can anyone help? I am pretty illiterate with computers so not confident running codes/formatting.
    As an aside - does anyone's Macbook cover attract dust over night? Mine attracts a nice grey layer as if by static - weird!

    Those additional files are perfectly normal. They are OS X system files... They are typically hidden when you use OS X... but since you are using a format that both Macs and PCs can read, Windows will usually see these files. You can leave them there or delete them... no harm either way.
    So far as your dust issue. If you are getting a layer of dust that covers your MacBook overnight... it sounds like you may not be in the best environment. Are you saying you get a layer of dust on your MacBook... but nothing else?

  • Outlook users' problems with Apple mail attachments

    Folks on Windows XP using Outlook 2003 are having problems with email from Apple mail. Apple mail is using Windows Friendly Attachments and Rich Text as the settings. Sometimes attachments (Word, Excel, PDF) come in fine with an additional .htm attachment, but the body text of the message is missing. If the Outlook user opens the .htm file, there is the body of the Apple mail. Testing with Plain Text results in the body text appearing fine in Outlook, but the attachment is seen as a *.dat file and of course can't be opened. The Macs are all on OS X Tiger with all OS updates applied. Users of Outlook in other offices don't have this problem, and users of Thunderbird on Windows don't have this problem. Any ideas on what is causing this and how to resolve it? Is there a setting on Outlook that needs to be tweaked? Is there a setting on Apple mail that needs to be tweaked? Apple mail attachments to this Windows office worked fine until a few weeks ago. I do not know what changed between then and now as I am not in charge of the computers at the Windows office. Could a Mac OS update have caused a problem? Something on Windows or Outlook specifically? Thanks for any help you can provide. I've scoured the web and have tried everything to no avail. Zipping attachments, while a workaround, is not a long-term solution. Thanks!

    Is this in an environment where an MS Exchange Server is being used? Seeing a file change to .dat would often point to that.
    Plain Text should be the plan of action for users of Apple Mail, but something (probably the Exchange Server) is messing that up. See:
    http://support.microsoft.com/kb/138053
    and also related:
    http://www.pchell.com/support/winmaildat.shtml
    Moving to Leopard would probably not solve this -- the administrator of the exchange server must act.
    Also the problem with winmail.dat files is known to impact other email clients used even on Windows computers.
    Ernie
    Message was edited by: Ernie Stamper

  • What is the EFI boot option for mac, and why is my Mac having problems with it?

    I just updated my 2012 Macbook Pro to 10.9, and I am having some problems with it. I have a bootcamp partition on it and regularly awitch between mac and windows, and 2when I went to switch nack to my Mac side, It said EFI boot nstead of the regular Macintosh HD. When I choose that option, the aple logo comes up and progress bar appears. Once the progress bar finishes, the computer shuts off and doesnt do anything. When I turn it on again, it just starts the efi boot again and shuts off when it finishes. Why is this happening and what can I do to fix this. All help is extremely appreciated.

    That usually happen because the OS X partition got corrupted. Abiotu the only fix for that is to reinstall OS X and to do that you might have to completely erase the drive or repartition it as one partition. Which will wipe out the Windows side. So backup everthing you can before you start.
    nisuteng wrote:
    Hi, did you fix the problem?
    I have the same problem... and my warranty has expired...
    please help~~
    thanks!!

  • I've got a mac pro problem with the starting up, but also a red light on the logic board solidly on. Its not among the diagnostic led. It's located near the BT adapter and the front fans. Also the fans run loud also. any solutions?

    Hi
    I've got a mac pro late 2006, and i am having problem with it for quite a while now. the problem i am facing is the start up process, and the red light on the logic board. Earlier I've got the two led on the diagnostic leds 5 and 6 turned on without the diagnostic button being pressed, and i think those are related to the processors overtemp. I've managed to solve that by, removing the processors and re applying the thermal compound on the heatsink. what i have left now with is the red light on  the logic board at the time i plugged in the power. At the same time when this light come on, the power indicator at the front panel come on as well. i am not sure what is this light relates to. We've replace the power supply too, and gone through the SMC reset but seems no help.
    Any idea on the problem? I am desperate about it, and i will be greatful if anyone can help..
    thanks and hope for your best solutions
    Kari

    I can't help directly with your problem but you might check here http://tim.id.au/laptops/apple/macpro/ for a service manual which could answer your question.

  • Mac pro problems with screen

    my mac pro got problems with the screen it loocs like too many square and vertical lines also it dosen't start recently i just change the hard drive an when I tried to instal the sistem operative  it just started those problems can someone help me what can i do?

    Which Mac? what year, what model, what speed, what size screen  e.g., 2006 MacBook Pro 5,1  2.95GHz 13" screen
    What graphics card, if you know it.
    What version of Mac OS X, e.g., 10.5.5?

  • AP 2700 - 2 MAC addresses - problem with joining to the WLC

    Hi,
    I had a problem with joining my new AP 2700 to the controller. I've found workaround but I would like to ask you if you know if this behavior is a some kind of bug or maybe feature :)
    I have DHCP server which assigns IP address base on the binding MAC address with the IP address. Without binding, IP won't be assigned so I added MAC address from the AP sticker (MAC and SN number is on the sticker at the back of each AP) to the DHCP, connected AP to the switch port which was configured exactly the same way like other ports on this switch where older AP are working fine and.... nothing. IP address was not assigned. There was no DHCP request in the DHCP server logs.
    During the investigation I've found that AP present 2 MAC addresses on the switch interface:
    switch#sh mac address-table interface fa1/1
    Mac Address Table
    Vlan Mac Address Type Ports
    11 58f3.54c1.2cb3 DYNAMIC Fa1/1
    11 58f3.54c1.2cb4 DYNAMIC Fa1/1
    The first one (58f3.54c1.2cb3) is a "sticker" MAC address but the second one (58f3.54c1.2cb4) is something new. Looking in to the DHCP logs I've found log that this second MAC address (58f3.54c1.2cb4) tried to get IP address but it was not possible because this MAC was not binding with any IP address so DHCP server refuse. I added this second MAC (58f3.54c1.2cb4) to the DHCP server, AP get IP address, join to the WLC, download software, reboot and ... this MAC address disappear.
    switch#sh mac address-table interface fa1/1
    Mac Address Table
    Vlan Mac Address Type Ports
    11 58f3.54c1.2cb3 DYNAMIC Fa1/1
    Software I had on the AP before joining to the WLC was:
    Version :
    Cisco IOS Software, C2700 Software (AP3G2-RCVK9W8-M), Version 15.2(4)JB5, RELEASE SOFTWARE (fc1)
    now I have (after downloaded from the WLC)
    Version :
    Cisco IOS Software, C2700 Software (AP3G2-K9W8-M), Version 15.2(4)JB6, RELEASE SOFTWARE (fc1)
    Do anyone know what happen?

    (WLC1) >show sysinfo
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.6.130.0
    Bootloader Version............................... 1.0.20
    Field Recovery Image Version..................... 7.6.95.16
    Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
    Build Type....................................... DATA + WPS
    System Name...................................... WLC1
    System Location..................................
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
    Redundancy Mode.................................. Disabled
    IP Address....................................... 10.10.10.10
    Last Reset....................................... Software reset
    System Up Time................................... 25 days 2 hrs 53 mins 5 secs
    System Timezone Location.........................
    System Stats Realtime Interval................... 5
    System Stats Normal Interval..................... 180
    Configured Country............................... US - United States
    Operating Environment............................ Commercial (0 to 40 C)
    Internal Temp Alarm Limits....................... 0 to 65 C
    Internal Temperature............................. +44 C
    External Temperature............................. +22 C
    Fan Status....................................... OK
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Disabled
    Number of WLANs.................................. 6
    Number of Active Clients......................... 25
    Burned-in MAC Address............................ XX:XX:XX:XX:XX:XX
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Present, OK
    Maximum number of APs supported.................. 25
    (WLC1) >show time
    Time............................................. Thu Apr 9 13:51:00 2015
    Timezone delta................................... 0:0
    Timezone location................................
    NTP Servers
    NTP Polling Interval......................... 3600
    Index NTP Key Index NTP Server NTP Msg Auth Status
    1 0 10.10.10.11 AUTH DISABLED
    It's look like AP doesn't allow for console login or commands it just only show activity. After rebooting the WLC I get information:
    Cisco IOS Software, C2700 Software (AP3G2-RCVK9W8-M), Version 15.2(4)JB5, RELEASE SOFTWARE (fc1)

  • Quicken for Mac 2007 problem with 10.6.2

    So I went to open Quicken for the first time since installing the 10.6.2 update and I thought I'd share my experience.
    After repeatedly crashing upon launch, I contacted Quicken support.
    After a 3-hour chat (my favorite part was when the rep asked me what a G4 was)
    I was given the R3 update, which still won't open my main file.
    As it turns out, I have a drive that I can boot into 10.4.11, where everything seems to be working now. I was able to open a smaller (664 kb), simpler more recent file, but my main file (6.4 mb) with all my important stuff can be opened only under 10.4.11.
    I learned along the way that Quicken never updated the code for Intel processors, and that Quicken is proud to announce Quicken for Mac 2010. Here's a quote: "Our Quicken Mac 2007 and earlier users should note that this is a brand new product, so some of the features you've grown used to may not be included"
    Quicken 2010 for Mac - Now with fewer features!
    Anyway, I hope this helps someone out there....

    I am a new convert to IBANK (www.iggsoftware.com). I have been running Quicken 2008 in Windows on my Mac. I have been waiting for Quickens new program as Quicken 2007 for the MAC is only half the program that it's Windows counterpart is. Intuit has chosen to string us along for over a year waiting for their new Quicken Financial Life program only to dumb it down (http://quicken.intuit.com/personal-finance-software/mac-personal-financial-softw are.jsp) to Quicken Essentials for the MAC.
    It is time to send them a message that they are going to lose money for their lack of comitment to us MAC users.

  • Mac G4 Problems with "Application Launch Failure"

    I'm not sure if this is the right forum for my questions, so if not, please LMK where I should be asking for help.
    I have a G4 running Mac OS X 10.3.9. In the last two weeks, I have had a number of errors involving an Application Launch Failure. This started immediately after I had the foolish idea of shutting down my computer for the night to save power. I selected Shut Down from the drop down menu, the computer shut down and everything seemed ok till the next morning when I started up. Since that time, I have had the application launch failure problem with Word, Excel, PowerPoint, Graphic Converter, Yahoo Messenger, and assorted other programs.
    The error message I get is for instance: Application Launch Failure The application "Word" could not be launched because of a shared library error:1<MicrosoftWord> <CarbonLib> <CFMPriv_CarbonCore> " or a variation depending on the program.
    I have "restored" the computer, I have reinstalled Mac OS X 10.3.9, reinstalled the relevant Microsoft Office suite, and I still get the error message.
    Does anyone have any suggestions (other than getting a new system)?
    TIA for any help.
    Ronnie Wexler

    Boot from the Install CD, but do not Install. Choose Disk Utility off the Installer Menu as your first action. Select your Hard Drive and choose ( Repair ). Repeat until it comes clean (or gets stuck). Then (Repair Permissons ) once.

  • Migrate users problem with security answers

    Hi,
    we are trying to mograte users from an old IDM system to a new one,
    we want to export/import the user list, but we have a problem with the security answers since they are encrypted and we don't know the best way to move them.
    could you please help? the old IDM is v 6 and new one is 8.1 (already running with customizations and different user set)
    Thanks

    the easiest way:
    1. export/import the encryption keys in the new installation.
    2. export/import the q/a policies, orgs, and make sure your maintain their exact same object IDs.
    3. export/import users , and make sure their answers' IDs match whatever exist in the new installation.

  • Library Shared Between Two Users- Problems with Artwork

    My iTunes library is located in the Shared folder so that I can reach it from two different log-ins, and both have (or should have) the same access privileges, but for some reason I can only change the artwork when I'm logged into one of the accounts. When I log into the other account, the artwork options are grayed out. Any advice on how to fix this problem?

    The problem with that method is you are sharing the same set of media files, but you each have your own iTunes databases, so you get that issue where songs added in one account do not show up automatically in the other. Likewise, one account can delete stuff and the other account won't know.
    If you don't have a need to have both accounts accessing the iTunes library at the same time (meaning if you use fast switching, then each user would have to remember to close iTunes first), you can relocated the ENTIRE iTunes folder to the shared folder (not just the iTunes Music folder). Then use these instructions to open the library from that location...
    How to open an alternate iTunes Library file or create a new one
    http://docs.info.apple.com/article.html?artnum=304447
    If both accounts use the above to point to the same library, you will both be using the exact same database files so what is done in one account is automatically there for the other account to see. However the downside is since both account use the same database files, you can not have both accounts running iTunes at the same time since both will be trying to access and write to the same file at the same time (bad thing). In addition, this also doesn't allow you to have different sets of playlists, playcounts, ratings, etc. Same database, so you would both have to see the same set of info including those.
    If you rather stick to the old method of the same media files but separate database files, then you will have to continue to manually add stuff to the other account after importing from the first account to the media folder.
    Patrick

  • A lot of us CC users are having a problem with LR5--photos won't open in PS from LR.  Is there a fix?

    I have called the guys in Mumbai about this 5 times and they don't have a clue.  The "Edit>Edit in>Photoshop" function works fine on my desktop, but won't work on my laptop (Mac's).  I know I am not the only one, and I have had the Genius Bar guys look at the Mac end of the problem.  The issue is with Adobe, and there is a long string of forum complaints about this you can access on google.  There is an awkward work-around, but that ain't what I am paying for.  Does anybody have a solution?

    Read this link as see if if helps any.
    http://www.adobeforums.com/webx/.59b516f6/5

Maybe you are looking for