Macbook pro with Retina black display

Hi All,
I was working in my laptop (MacBook Pro late 2013 with retina) normally for maybe 30 min and suddenly the display become black and the laptop doesn't work. I used turn off bottom to shutdown it.
This happened twice. Please, help me with this problem.

In the Print dialog, select the Color Matching tab and then select Vendor Matching.

Similar Messages

  • New Macbook Pro (with Retina) black screen after waking up

    Hello,
    I bought a new 2015 Macbook pro (13" with Retina) a couple of weeks ago and noticed one thing that concerns me.
    When the Macbook either boots up or wakes up from sleep mode it stays on a completely black screen for about 30-45 seconds.
    I find myself sweating it out to see if the screen will actually come on. So far the screen always (eventually) comes on and the Macbook works as expected.
    Do you think this is a problem with the Macbook? If so, I'd like to return it for anew before the month is up.
    If this is a software issue, how can I fix it?
    Thanks in advance for your help.

    Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
    1. Set the default startup disk.
    2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
    3. Reset the System Management Controller.
    4. Reset the PRAM.
    5. Reset the printing system.

  • So, my Macbook Pro with retina display only prints in black and white. My printer, officejet 4620 series [555DE4], is not the problem. I want to know how to be able to print in color as well??

    So, my Macbook Pro with retina display only prints in black and white. My printer, Officejet 4620 series [555DE4], is not the problem. I want to know how to be able to print in color as well??

    In the Print dialog, select the Color Matching tab and then select Vendor Matching.

  • Installing windows 7 on a macbook pro with retina display

    Hi All -
    I just purchased a new macbook pro with retina display and I want to install a copy of windows 7 on this machine. I've gone through numersous postings online about the proper way to do this - and I had a few questions as it is a little confusing.
    What I have:
    15" macbookpro with retina display
    External superdrive
    Physical copy of windows 7 64 bit
    a burned image of the windows 7 disk (as a .CDR file)
    Several postings have indicated that I need a flash drive; is this the case if I have the actual disk and the superdrive I can use for reading it?
    If not and I do in fact need a flash drive - I have an 8gb with encryption software on it - if I need to make an autoboot for the windows .cdr is there a special way to do this or will the .cdr image work as it is?
    I appreciate any help provided.
    Thank you
    Lenny

    Hi - I connected my superdrive but it does not seem to be working - now all I get is a black screen with the prompt - no bootable device; insert boot disk and press any key.
    Any thoughts on this? I put an ISO image on my desktop and also created an image on a USB drive - however it has encryption software on it which did not get overwritten so Im not sure if this is why that won't boot.
    Does anyone know if the Superdrive can't be used?
    My macbook is 3 weeks old - it is all the latest and greatest stuff...

  • My MacBook Pro with Retina display displays power point and not other windows when connected to a projector

    My MacBook Pro with Retina display displays power point and not other windows when connected to a projector. Can anyone help out please?

    You should also ask this in the MacBook Pro forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/notebooks/macbook_pro

  • Macbook pro with retina display power adapter popped / exploded!

    I was just charging my macbook pro with retina display when a loud "pop" noise came from the power adapter and the red light on the magsafe2 connector went out. I unplugged it all immediately, but there was a burnt kind of smell and bit of black 'sooty' type material around one of the edges of the adapter!
    Thankfully the rMBP appears fine.
    I actually just got a replacement rMBP as the other one had a small scratch on the body. So both the charger and the rMBP that was atached at the time of the pop, will be returned in a few days anyway. Still I am a little alarmed by it all. The charger was plugged into a 6-way extension adapter with surge protection, so I don't think it was a power surge. And anyway my tv (also plugged into the socket adapter) was on at the time and there was no problem there. Can I assume it was just a fault in the adapter? I will tell them about it of course when I call up tomorrow to arrange the return. I just hope the same isn't going to happen with the new rMBP and charger!
    Has anyone else suffered a similar "pop" and broken adapter?

    Apple's warranty IS international. You have a one-year warranty when you buy the machine and you can extend that - and your phone support - to three years by purchasing the AppleCare Protection Plan, which is international as well.
    Good luck with your new computer!
    Clinton

  • How do I get the most out of my Macbook pro with retina display?

    Hi,
    I am new to apple had an Iphone and loved it and was drawn in by the advertisment for the new macbook pro with retina display and decided to get myself one. I have pretty much taught myself everything so far and I think I have a basic enough knowledge now of working my way round my mac and was wondering if anyone has any suggestions on how I can look to develop as I feel I have got all the gear but no idea!\
    Any suggestions are greatly appreciated,
    Cheers

    http://www.apple.com/support/mac101/

  • How do I connect an external microphone to a Macbook Pro with Retina display ?

    How do I connect an external microphone to a Macbook Pro with Retina display ?
    Alternatively how do I connect an audio input at a level that would normally have gone into a 'line input' socket ?

    Plug it into the linein/headphone jack if there's just one.  It'll switch between the two modes automatically depending on what you plug into it.

  • The quality of built-in camera on macbook pro with retina display is far worse than any other mac. Why?

    I just got the new macbook pro with retina display like a week ago and I've been noticing that the quality of the built-in camera on it is so bad.
    It's even worse than my 2009 iMac or my sister's 2012 13" macbook pro. I don't get why this is a facetime HD built-in camera when i can obviously see that is not even near HD. Or is it just my computer. Do i have to bring it to the apple store??

    it's advertised 720p so yes it is the same as all the other MBP.  it may just be the resolution of your monitor is stretching the pixels.  Don't worry about bringing it to the apple store. 

  • Is there a way to digitize audio using the headphone input on the 15-inch (late 2013) Macbook Pro with Retina display?

    I'd like to digitize audio from a minidisc player into my 15-inch (late 2013) Macbook Pro with retina display, but can't see a way to change the internal mic input.  I understand that previous MacBooks allowed the headphone jack to double as a mic input, but mine doesn't seem capable of switching.  I've tried using a mini to mini cable, with no luck, and also tried using a headset splitter adapter (3.5 mm 4-pin to 2x3-pin 3.5 mm headset splitter adapter from Amazon) because I read that that would allow me to plug in headphones and input audio.  But in both cases, the only "input" available in my sound preferences is the built-in internal microphone.  Am I missing something?  Is there a way to digitize audio through the headphone jack? 

    Not likely. headphone jacks are usually output only devices unless specifically stated to support input, and even then, it may not be audio input that they support, but merely control input for volume and such.
    You can get a USB audio input instead. i.e:
    http://www.amazon.com/Griffin-Technology-iMic-Audio-Device/dp/B000BVV2IC

  • What cable do I need in order to migrate from Macbook Pro (December 2008) to the new Macbook Pro with Retina display?

    It's driving me crazy; I have a firewire, but it isn't compatible with the ports on the new macbook pro with retina display.
    Thanks for your help!

    hanskra wrote:
    I wish to know from Apple,
    These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily.  No one here works for Apple nor does Apple get involved in responding. 
    You can either contact Apple Care since you are still under warranty or click on the "Contact Us" link at the bottom of this website. 

  • Macbook Pro with Retina wont detect monitor on mini display port to dual-link dvi adapter

    So after reading Jeff Atwood's post, I decided to jump and give it a shot. So this week I got my monitor in from Korea, and I already had my Apple mini display port to dual-link dvi adapter, hooked everything up - and nothing. Monitor doesnt show a signal, and no display shows up in user preferences.
    To verify the monitor actually works, i plugged it into my windows box - and boom, right away there it is in all its glory. So I called apple support, after spending about an hour going through the "are you sure its plugged in stuff", the tech finally admitted to being stumped and blamed the adapter. Not to be deterred, I then went to my local apple store and talked them into trying their adapter to rule out the adapter - regardless of the adapter, the mbp wont detect the monitor.
    Just for fun, i tried my old single mini displayport to single dvi, the monitor is recognized, but that obviously cant drive the right resolution, so i just get a backlight. Same deal when i try the hdmi port with a hdmi to dual-link dvi adapter on the end of it. Also tried display port to the same hdmi with adapter on it (the joys of working in a dev shop - cables to test everywhere)
    I have read / tried a ton of things:
    re-installed / uninstalled air display, just to be sure it was gone. went through all my apps just to see if there is anything like this i could think would be effecting it
    install gfxCardStatus to ensure i am on the nvidia (discrete) and not the internal card
    Played with different settings on SwitchResX to try to force the res over hdmi - no love - os rejected each one
    I bought the monoprice adapter wondering if it was just the apple adapter since the apple adapter has been panned, no love from it either
    Reset the PRAM countless times
    I have two other adapters coming in to test with in a day or two - maybe one of those will be magic, but at this point i kinda think its software on the mac. My Spec:
    I am running Mountain Lion with all the latest updates
    New MBP with Retina (2.6g processor, 16gig ram, nvidia video card)
    Here is the ebay link to the monitor
    Now the other weird thing is pretty much universally these auctions say the monitors cant be run on a laptop - which makes no sense to me, because its just a connection, if the video card is strong enough (which my machine better be) it shouldnt matter the source. The listing mentions its a "by-pass" monitor, which is something I and google have never heard of.
    So any sage words to make my day?

    Magic was, I have to have the adpter plugged into the mac, let it recognize all with the monitor powered off.
    then power on the monitor, and boom gloriousness
    For future generations, setup that works:
    1) MacBook Pro with Retina
    2) Monitor From Korea (example auction)
    3) Accell Mini DisplayPort to Dual-Link DVI Active adapter (amazon)
    4) Boot mac, plug in adapter, let it recognize the monitor, power on monitor

  • I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display.

    I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display. i have never seen this message before and i have 2 other macbooks and have had many other also. i am assuming this is a problem with the new macbook retina. does anyone know the exact fix to this issue? i have seen many sugestions to try to fix this issue but none have solved the issue for anyone that i can find in the Apple Support Community. thank for looking into this in advance.
    ******A true apple fan********

    Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
    Bebers5

  • How can i copy files from one external hard disk to another using macbook pro with retina display

    How can i copy files from one external hard drive to another using macbook pro with retina display?

    That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
    Clinton

  • I have only loaded phone contacts in my new iPhone 5 and my email contacts only on my Macbook Pro with retina display contacts how can I keep them from changing my iPhone to email contacts only when I connect to iTunes please

    Since purchasing a new iPhone 5 and macbook pro with retina display I have decided to keep the iPhone 5 for phone contacts only, and the macbook for email contacts only .. Is there a way for me to keep these as they are recorded on each apple product when I sync with iTunes as it has changed my iPhone and put in email contacts and thus deleted iPhone phone contacts once when I syncd thanks appreciate any help

    To prevent your iPhone from automatically syncing when you plug it in, click on iTunes in the menu bar, then preferences, then "devices", then tick "prevent iPhones, iPad's and iPod's from syncing automatically".
    Plug it in, then on the iPhone sync summary screen, click "info" along the top.
    Make sure the "sync contacts" option is not ticked. as long as it's not ticked, then it won't sync with your mac's contacts but will still include them in backups.
    Also, if you use iCloud, make sure that the iPhone/mac are either not signed into the same account, or that "contacts" is not turned on for both of them

Maybe you are looking for

  • Crashing everywhere (Quicktime x, 7, itunes) since update.

    Folks, since I updated to 10.6.5 Quicktime 7, X, and iTunes will not launch. I keep getting this error in the console with Quicktime 7 that started my search: BUG IN CLIENT OF LIBDISPATCH I've done all of these to no avail: - zapped pram - repair per

  • Final cut to DV MIXER

    Hi I´ve a problem with a Videonics MXProDV. I want to connect to my mac to capture my 4 camera show, but dont reconize that device... What can i do? thanx

  • Get change document data

    How do we get the change document data to be used in a workflow, I have made entry in swec , there i associated the change object and my zbo delegeted from standard bo and specified the event as "on change". now i want to send a mail using this chang

  • Page cannot be found

    Hi, I have problem in my Portal Page, i want to create a form for an application i've created, when i click on 'form' the server cannot find the page for creating the form. How can i find the missing page?

  • Mail port setting for .Mac?

    I use Mail for my .Mac account and usually have no problem sending e-mails. However, whenever I am on campus at school I am unable to send out any mail (and thus my messages are always moved to the Outbox but never sent out). Once I reconnect off cam