Macro in Module pool
Hi all,,,
i want to have payroll data in module pool program,,,i included the standard include i.e. but it is not accepting the standard macro 'rp-imp-c2-cu'. pls tell me how to import the payroll data using moduke pool...
its urgent.
Thanks......
Where did you put the standard include? Sometimes Macros do not get found unless the Define is in the code before the macro is called - so you may need to put the include statement for the standard HR include at the beginning of your top include for the dialog program?
Andrew
Similar Messages
-
hi guys,
please advise how can i download/export ABAP(report,module pool...etc) source code to client PC?
thanks.hi
this report is to export to another server...
PROGRAM ZDOWNLOAD_SAP
LINE-SIZE 132
LINE-COUNT 62
NO STANDARD PAGE HEADING.
This program up / downloads from / to a local dataset
all the components of an ABAP - i.e TEXTS, the entire CUA
including statuses and menus, DYNPROS and source code.
Program documentation and variants are not handled.
INCLUDED programs are automatically handled both on upload
or download. INCLUDE selection can be excluded or generic
e.g only handle INCLUDES starting with ZIN*
INCLUDES within INCLUDES alos handled.
The only restriction is on UPLOAD the INCLUDED programs must come
from the same directory as the main program.
On Download of course the ABAP must exist in the library.
Note for LINUX and BATCH users
This program was originally designed as a one off tool for
getting ABAPS etc from a SAP R2 (IBM MVS mainframe system) into
an R3 test system minimising the need for a large amount of
mainframe sysprogs (anybody remember what they were !!) time
and support to say nothing of access problems from TSO /JES2 /
SAP R2. At that time network connections were patchy and the
transport systems largely incompatable and not very reliable.
This program was originally designed as a one off tool for
Must run on Windows front end ---- If you are running SAP with
LINUX on your work station you will have to change the WS_UPLOAD
and WS_DOWNLOAD functions to reflect the Linux file system. The
contents of the data sets themseleves do not need to be changed
Program can easily be modified to run in batch and store
the data on a UNIX host. Change the WS_UPLOAD and WS_DOWNLOAD
to read from and write to UNIX data sets (OPEN FILE etc).
You will also need to modify the parts of the program that get
the DOS directory and display the Windows file paths.
The actual abap data sets do not need to be changed.
Rel 4.0 names can now be up to 40 bytes long
Dynpros and CUA have changed from rel 3.1
Tabstrips now loaded and unloaded in dynpros
Please note restriction on 4.6 systems for users who
have ABAP names which include '/'s in their names.
Rel 4.6b, 4.6c Abap names can include the '/' in their names
e.g /CUST1/CUST2/ORDER
This causes problems when storing to a local file.
a solution is to change the name to %CUST1%CUST2%ORDER i.e / will
be changed to %. On upload the % should be changed back to /
again. This change still needs to be implemented.
If you don't use the / in the abap name then this is not a problem.
If file to be uploaded is in rel 3 format then names are only 8
bytes long.
program uses 3 datasets per abap
1) abapname.eee source, dynpr logic, texts, CUA stuff
2) abapname.hhh dynpr header
3) abapname.fff dynpro fields.
because of varying lengths and contents 3 data sets are used. The
complexity of combining all these to 1 data set would make the
program far too complex.
NOTE: This version of the program can only be used on
release 4.0 or higher. Once an ABAP has been converted
to rel 4.0 it cannot be converted back to rel 3.0
on a release 3/3.1 system. Release 4 CUA tables
are different. Use release 3 version of this program
for releases 3.0 and 3.1. Available on SAPFANS website.
Note that data to be uploaded must have been previously downloaded
by this program (any version since rel 2.0) - except for Initial
Load -- see end of these comments.
Dynpros and CUA statuses have changed since rel 3.1
This program will handle rel 3.1 format on upload but will
download in rel 4.0 format. To upload 3.1 format specify an 'X'
in the rel3 parameter.
If you have downloaded components in rel 4.0 format and you
want to re-load to a 3.1 system you will have to load
the source via standard upload and re-create dynpros and the CUA
manually.
As names can now be longer than 8 characters you can only
use this program if the SAP front end (SAPGUI) supports
long file names (WIN 95/98 or WIN NT). Windows 3.x will not
work as the underlying DOS system cannot handle long file names.
UPLOAD function and DOS directory.
When an ABAP is selected for UPLOAD then the DOS
directory is read into a table. A file called ABAP.BAT is created,
and down loaded to the 'C' drive and executed.
This file executes a DOS DIR command and pipes the output
into a dataset which is then uploaded into an internal
table on SAP.
Note on running DOS commands from ABAP
The first time this procedure is executed you will see a DOS window
which you will have to close manually. To get round this
use windows explorer to select the file ABAP.BAT and then
right mouse click on the file name. Select the
properties window. From this click the CLOSE on EXIT box. This
will then automatically close the DOS function after it has
executed. (Windows restriction).
The DOS function has not been tested using Windows 2000 so
it might not work. OK on W95,W98,WME and Windows NT (No Thanks)
If INCLUDE programs are wanted on UPLOAD only the specified
directory is searched.
Instead of entering path name manually you can click on
the path parameter. Because of Windows restriction you will
have to select ANY file in the relevant directory.
The path will then be copied on to the selection screen.
To do still : Merge 3 files to one and compress output to .ZIP file
fix 4.5 4.6 problem of abaps containing '/' in the name
possibility to automatically up / download referenced
function modules with selection criteria like INCLUDES
To load the ist time into a system.
Create program with ABAP editor and Upload the .EEE file.
Delete ist line (????SRCE) in the ABAP EDITOR --NOT THE DISK FILE
Delete all the source from the line that starts ????TEXT (towards
the end file) till the end so the last line in your source is ENDFORM.
DO NOT ALTER THE DISK FILE. DO THESE CHANGES IN THE ABAP EDITOR.
Save file and execute
Use following parameters (Note the ist time you won't get proper
text on the selection screen).
Function U
Path full dos path containing source e.g c:\abaps\
NOTE YOU MUST ENTER THE FINAL \ as above.
REPID the program name. e.g ZZJIMHXX
note that on the DISK you will see 3 files
ZZJIMHXX.EEE, ZZJIMHXX.FFF, ZZJIMHXX.HHH
just use the name before the dos qualifier - the
program will do the rest
ignore other parameters
The program will then load itself with all the texts etc.
It should now be ready for use.
Macros
DEFINE DEFINE_TABLE.
DATA: &1 LIKE &2 OCCURS &3 WITH HEADER LINE.
END-OF-DEFINITION.
DEFINE CLS.
REFRESH &1.
CLEAR &1.
END-OF-DEFINITION.
DEFINE INIT.
IF &1 NE SPACE.
SEARCH &1 FOR '. .'.
IF SY-SUBRC = 0.
WRITE '*' TO &1+SY-FDPOS(1).
ENDIF.
TRANSLATE &1 USING '*%'.
ELSE.
MOVE '%' TO &1.
ENDIF.
END-OF-DEFINITION.
end of macros
/ SAP standard tables */
TABLES: D020S, "Dynpro header
D020T, "Dynpro title
D021T, "Screen field keyword texts
TRDIR, "Attribute table
TADIR, "Dev. class etc.
EUDB, "CUA data
TSTC, "transaction data
TITLE, "CUA titles
RSMPTEXTS. "Function texts (rel 4.0)
/ Work tables to hold ABAP source etc, and dynpro */
/ contents. */
DATA: BEGIN OF H. "Header
INCLUDE STRUCTURE D020S.
DATA: END OF H.
DATA: BEGIN OF H1 OCCURS 10, "Header
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N.
INCLUDE STRUCTURE D020S.
DATA: END OF H1.
DATA: BEGIN OF H2 OCCURS 0, "Rel 3 dynp. header
CNAME(8) TYPE C,
CNUM(4) TYPE C,
NNAME(8) TYPE C,
NNUM(4) TYPE C,
FILL(51) TYPE C,
CDAT(6) TYPE C,
CTIM(6) TYPE C,
END OF H2.
DATA: BEGIN OF F OCCURS 250. "Dynpro Fields
INCLUDE STRUCTURE D021S.
DATA: END OF F.
DATA: BEGIN OF F1 OCCURS 500, "Dynpro Fields
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N.
INCLUDE STRUCTURE D021S.
DATA: END OF F1.
DATA: BEGIN OF OLD_F1 OCCURS 0, "Dynpro Fields (rel 3)
NAME(8) TYPE C,
NUMBER(4) TYPE C.
INCLUDE STRUCTURE D021SE_OLD.
DATA: END OF OLD_F1.
DATA: BEGIN OF F2 OCCURS 0, "Dynpro Fields (rel 3)
TFIL(284) TYPE C,
END OF F2.
DATA: BEGIN OF M OCCURS 3. "Match codes (if any)
INCLUDE STRUCTURE D023S.
DATA: END OF M.
DATA: BEGIN OF E OCCURS 0. "Dynpro Logic
INCLUDE STRUCTURE D022S.
DATA: END OF E.
DATA: BEGIN OF E1 OCCURS 0, "Dynpro Logic
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N.
INCLUDE STRUCTURE D022S.
DATA: END OF E1.
DATA: BEGIN OF T OCCURS 0, "prog name and dynpro nrs
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N,
END OF T.
DATA: BEGIN OF R OCCURS 56, "prog name and language
NAME(40) TYPE C, "rel 4
LANGUAGE(1) TYPE C,
END OF R.
DATA: BEGIN OF S OCCURS 3000,
TXT(180) TYPE C, "rel 4 was 132
END OF S.
DATA: BEGIN OF R1 OCCURS 50, "for include programs
NAME(40) TYPE C, "rel 4
INSTANCE(3) TYPE P,
END OF R1.
DATA: BEGIN OF S1 OCCURS 3000,
TXT(180) TYPE C, " rel 4 was 132
END OF S1.
DATA: BEGIN OF U OCCURS 100, "Text elements
TXT(180) TYPE C, " rel 4 was 132
END OF U.
DATA: BEGIN OF DIR. "ABAP Attributes
INCLUDE STRUCTURE TRDIR.
DATA: END OF DIR.
DATA: BEGIN OF DTXT. "Dynpro field keyword texts
INCLUDE STRUCTURE D021T.
DATA: END OF DTXT.
/ This data contains all the components of the */
/ CUA such as menus, statuses, Pfkeys */
/ As from rel 4.5 Tabstrips are automatically copied as well */
/ The rel3 parameter must be set however to load the */
/ correct version of the CUA tables if uploading rel 3 */
/ data to a rel 4 system. */
/ Rel 4.0B can convert 3.1 and earlier CUA's */
/ This could change later however. */
CUA Tables.
Key of CUA tables in EUDB data set. Name is len 40 in rel 4.0
DATA BEGIN OF EU_KEY.
INCLUDE STRUCTURE RSEU1_KEY.
DATA END OF EU_KEY.
Status
DATA BEGIN OF STA OCCURS 0.
INCLUDE STRUCTURE RSMPE_STAT. " rel 4
DATA END OF STA.
Functions
DATA BEGIN OF FUN OCCURS 0.
INCLUDE STRUCTURE RSMPE_FUNT. "rel 4
DATA END OF FUN.
Menus
DATA BEGIN OF MEN OCCURS 0.
INCLUDE STRUCTURE RSMPE_MEN. "rel 4.0
DATA END OF MEN.
Menus (texts)
DATA BEGIN OF MTX OCCURS 0.
INCLUDE STRUCTURE RSMPE_MNLT. "rel 4.0
DATA END OF MTX.
Action Bar
DATA BEGIN OF ACT OCCURS 0.
INCLUDE STRUCTURE RSMPE_ACT. "rel 4.0
DATA END OF ACT.
Push Buttons
DATA BEGIN OF BUT OCCURS 0.
INCLUDE STRUCTURE RSMPE_BUT. "rel 4.0
DATA END OF BUT.
PF-Keys
DATA BEGIN OF PFK OCCURS 0.
INCLUDE STRUCTURE RSMPE_PFK. "rel 4.0
DATA END OF PFK.
Function sets
DATA BEGIN OF SET OCCURS 0.
INCLUDE STRUCTURE RSMPE_STAF. "rel 4.0
DATA END OF SET.
Documentation
DATA BEGIN OF DOC OCCURS 0.
INCLUDE STRUCTURE RSMPE_ATRT. "rel 4.0
DATA END OF DOC.
Title codes with text
DATA: BEGIN OF TIT OCCURS 0.
INCLUDE STRUCTURE RSMPE_TITT. "rel 4.0
DATA: END OF TIT.
DATA BEGIN OF FTX OCCURS 0. "rel 4.0
INCLUDE STRUCTURE RSMPTEXTS.
DATA END OF FTX.
rel 3.1 CUA components.
Status
DATA BEGIN OF OLD_STA OCCURS 0.
INCLUDE STRUCTURE RSEU1_GEN. " rel 3.1
DATA END OF OLD_STA.
Functions
DATA BEGIN OF OLD_FUN OCCURS 0.
INCLUDE STRUCTURE RSEU1_FUN. "rel 3.1
DATA END OF OLD_FUN.
Menus
DATA BEGIN OF OLD_MEN OCCURS 0.
INCLUDE STRUCTURE RSEU1_MEN. "rel 3.1
DATA END OF OLD_MEN.
Menus (texts)
DATA BEGIN OF OLD_MTX OCCURS 0.
INCLUDE STRUCTURE RSEU1_TXM. "rel 3.1
DATA END OF OLD_MTX.
Action Bar
DATA BEGIN OF OLD_ACT OCCURS 0.
INCLUDE STRUCTURE RSEU1_ACT. "rel 3.1
DATA END OF OLD_ACT.
Push Buttons
DATA BEGIN OF OLD_BUT OCCURS 0.
INCLUDE STRUCTURE RSEU1_BUT. "rel 3.1
DATA END OF OLD_BUT.
PF-Keys
DATA BEGIN OF OLD_PFK OCCURS 0.
INCLUDE STRUCTURE RSEU1_PFK. "rel 3.1
DATA END OF OLD_PFK.
Function sets
DATA BEGIN OF OLD_SET OCCURS 0.
INCLUDE STRUCTURE RSEU1_SET. "rel 3.1
DATA END OF OLD_SET.
Documentation
DATA BEGIN OF OLD_DOC OCCURS 0.
INCLUDE STRUCTURE RSEU1_ETM. "rel 3.1
DATA END OF OLD_DOC.
Title codes with text
DATA: BEGIN OF OLD_TIT OCCURS 0.
INCLUDE STRUCTURE TITLE. "rel 3.1
DATA: END OF OLD_TIT.
dynamic function text
DATA BEGIN OF FDN OCCURS 1.
INCLUDE STRUCTURE RSEU1_FDYN. "not req for rel 4.
DATA END OF FDN.
Icons
DATA BEGIN OF FIN OCCURS 1.
INCLUDE STRUCTURE RSEU1_ICON. "not req for rel 4
DATA END OF FIN.
dynamic menu texts
DATA BEGIN OF MDN OCCURS 1.
INCLUDE STRUCTURE RSEU1_MDYN. "not req for rel 4.
DATA END OF MDN.
Symbol list
DATA BEGIN OF SYM OCCURS 0.
INCLUDE STRUCTURE RSEU1_SYMB.
DATA END OF SYM.
Status Short text
DATA BEGIN OF STX OCCURS 0.
INCLUDE STRUCTURE RSEU1_CTX.
DATA END OF STX.
Attributes for function key settings (menu bars) Rel 3.0
DATA BEGIN OF ATT OCCURS 0.
INCLUDE STRUCTURE RSEU1_HAT.
DATA END OF ATT.
Include-Menus
DATA BEGIN OF INC OCCURS 3.
INCLUDE STRUCTURE RSEU1_INC.
DATA END OF INC.
Last used numbers
DATA BEGIN OF LAST.
INCLUDE STRUCTURE RSEU1_LST.
DATA END OF LAST.
data for call transaction (SE41 to re-generate the CUA)
DATA: BEGIN OF T_BDC_TAB OCCURS 0.
INCLUDE STRUCTURE BDCDATA. "BDC data
DATA: END OF T_BDC_TAB.
DATA: BEGIN OF T_MESSTAB OCCURS 0.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF T_MESSTAB.
/ Program data */
DATA: NUMBER(4) TYPE N,
OLDNUM(4) TYPE N,
FILESIZE TYPE I,
NR_OF_BYTES TYPE I,
I(3) TYPE P,
IX(3) TYPE P,
J(3) TYPE P,
L(3) TYPE P,
CUA-FLAG(1) TYPE C,
CUA_RETURN(10) TYPE C,
DYNPRO_MESSAGE(160) TYPE C,
DYNPRO_LINE TYPE P,
DYNPRO_WORD(30) TYPE C,
NUM(3) TYPE N,
DYNNAME(44) TYPE C,
FN1(128) TYPE C,
FN2(128) TYPE C,
FN3(128) TYPE C,
W_ITERATE(1) TYPE C,
MAIN(1) TYPE C,
FUNC(1) TYPE C,
OLDNAME(40) TYPE C,
OLD-FUNC(8) TYPE C,
NEW-FUNC(8) TYPE C,
FOUND(1) TYPE C,
LANGUAGE LIKE SY-LANGU,
FIRST-TIME(1) TYPE C VALUE 'Y',
OK-CODE(5) TYPE C,
NAME(40) TYPE C, "rel 4
TXLINE(70) TYPE C,
LINE(132) TYPE C.
DATA:
UL_FILE(128) TYPE C,
DL_FILE(128) TYPE C,
DOSLINE(72) TYPE C.
DATA: BEGIN OF DOSDIR OCCURS 0,
TEXT(72),
END OF DOSDIR.
DATA: BEGIN OF I_PROG OCCURS 0,
NAME(40),
END OF I_PROG.
DATA: BEGIN OF I_PROGT OCCURS 0,
NAME(40),
END OF I_PROGT.
DATA: BEGIN OF I_INCLUDE OCCURS 0,
NAME(40),
HANDLED(1) TYPE C,
END OF I_INCLUDE.
DATA: BEGIN OF I_INCL OCCURS 0,
NAME(40),
END OF I_INCL.
DATA: BUFFER(1024).
DATA: WINSYS(3).
DATA: GLOBAL_FILEMASK_MASK(20), GLOBAL_FILEMASK_TEXT(20).
DATA: GLOBAL_FILEMASK_ALL(80).
DATA: T_FILENAME(128),
TMP_FILENAME(128),
T_MODE(1),
FIELDLN TYPE I.
DEFINE_TABLE I_DYNPFIELDS DYNPREAD 0. "dynpro fields to be updated
DATA: I_FLDS LIKE HELP_VALUE OCCURS 0 WITH HEADER LINE.
FIELD-SYMBOLS: <F>.
/ Parameters */
SELECTION-SCREEN BEGIN OF BLOCK A1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS REPID FOR TRDIR-NAME OBLIGATORY .
PARAMETERS:
FUNCTION(1) TYPE C OBLIGATORY, "Function
DSNAME(40) TYPE C, "Data set name
INCLUDES(1) TYPE C DEFAULT 'N', "Resolve Includes
IMASK(40) TYPE C, "Include Mask
CLASS LIKE TRDIR-CLAS,
AUTHOR LIKE TRDIR-CNAM, "Author
APPL LIKE TRDIR-APPL,
PATH(88) TYPE C DEFAULT 'A:\',
REL3(1) TYPE C.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-004.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-005.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-002.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-003.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK A1.
/ Check users workstation is running WINDOWS, */
/ WINDOWS 95, or WINDOWS NT. OS/2 no good for */
/ this application. */
CALL FUNCTION 'WS_QUERY'
EXPORTING
QUERY = 'WS'
IMPORTING
RETURN = WINSYS.
IF WINSYS(2) NE 'WN'. "Win 3.X no good either
WRITE: / 'Windows NT or Windows 95/98 is required'.
EXIT.
ENDIF.
/ Get names of programs to be handled. */
/ Name can be a single value, many values or ranges */
/ as per standard SELECT-OPTIONS on selection screen */
/ On Download read TRDIR and store program names in a table */
/ as per selection options. */
/ On upload read the specified directory for all files of */
/ type .EEE from specified directory */
/ compare file names with selection criteria */
MOVE FUNCTION TO FUNC.
MOVE 'Y' TO MAIN.
CASE FUNC.
WHEN 'U'. "Upload required
PERFORM READ_DOS_DIRECTORY.
PERFORM GET_RANGE_UL. "Get list of progs to process
WHEN 'D'. "Download required
PERFORM GET_RANGE_DL. "Get list of progs to process
WHEN OTHERS.
WRITE: / 'Function not performed due to user request'.
EXIT.
ENDCASE.
SORT I_PROG.
DELETE ADJACENT DUPLICATES FROM I_PROG.
For download INCLUDE handling can be resolved via function
module call.
All Includes within Includes are also resolved by the function
module call.
Note that this method does not work if program itself is of type
I (it's an include)
In this case we can still search the source.
IF FUNC = 'D'.
IF INCLUDES = 'Y'.
PERFORM GET_INCLUDES_DL.
PERFORM PROCESS_INCLUDES_DL.
ENDIF.
ENDIF.
Program list from selection criteria i.e excluding INCLUDES found
LOOP AT I_PROG.
MOVE I_PROG-NAME TO R1-NAME.
APPEND R1.
DESCRIBE TABLE R1 LINES I.
WHILE I NE 0.
PERFORM EXECUTE-FUNCTION.
ENDWHILE.
REFRESH R1.
ENDLOOP.
We need to check now for INCLUDES on DOWNLOAD when the INCLUDE
program itself is of type I. In this case the function call
will not return the INCLUDES. For example we could be
downloading ZTESTTOP (an Include itself) which as an include
ZTEST01.
The process fortunately is the same as the UPLOAD function
except of course we need to read the library instead of the
DOS directory
process INCLUDE modules for Upload
On upload the procedure is more complex as Includes within
Includes can only be resolved by scanning the code and
searching if the program exists in the directory.
To get all INCLUDES within INCLUDES entries in table I_INCL
that do not exist in I_INCLUDE are copied to table I_INCLUDE
after each entire pass of table i_INCLUDE and table is then
re-looped through. Programs in table I_INCLUDE that have already
been processed have a "Y" indicator set in I_INCLUDE-AVAIL.
if func = 'U'.
IF INCLUDES = 'Y'.
DESCRIBE TABLE I_INCL LINES I.
IF I > 0.
W_ITERATE = 'Y'.
ELSE.
W_ITERATE = ' '.
ENDIF.
WHILE W_ITERATE = 'Y'.
PERFORM PROCESS_INCLUDES_UL.
PERFORM LOOP_THROUGH.
DESCRIBE TABLE I_INCL LINES I.
IF I > 0.
W_ITERATE = 'Y'.
ELSE.
W_ITERATE = ' '.
ENDIF.
ENDWHILE.
endif.
ENDIF.
DESCRIBE TABLE I_INCLUDE LINES I.
IF I > 0.
SKIP 1.
WRITE: / ' Included Programs found'.
SKIP 1.
LOOP AT I_INCLUDE.
WRITE I_INCLUDE-NAME TO LINE(40).
CONDENSE LINE.
WRITE: / LINE(80).
ENDLOOP.
ENDIF.
/ Table R contains ABAP names to up / download. */
/ Loop through table R and perform up / download */
/ for each program. */
/ Table R1 contains INCLUDE names found (if any) */
/ As each */
FORM EXECUTE-FUNCTION.
LOOP AT R1.
MOVE-CORRESPONDING R1 TO R.
APPEND R.
ENDLOOP.
REFRESH R1.
LOOP AT R.
REFRESH : T, E1, H1, F1, S, U.
PERFORM PROCESS.
MOVE 'N' TO MAIN.
ENDLOOP.
REFRESH R.
DESCRIBE TABLE R1 LINES I.
ENDFORM.
/ Build file names for UP/DOWNLOAD */
/ 3 files are generated per ABAP. */
/ 1) ABAP Path\PROGNAME.EEE (ABAP, Attr,Texts) */
/ Logic Path\PROGNAME.EEE (Dynpro Source Logic) */
/ CUA Path\PROGNAME.EEE (CUA components - keys etc) */
/ 2) Header Path\PROGNAME.HHH (Dynpro Header) */
/ 3) Fields Path\PROGNAME.FFF (Dynpro Field definitions )*/
/ ( If alternate file name specified -DSNAME- this will */
/ be used instead. This is only valid for the main program. */
/ INCLUDED programs will have file names as specified */
/ above). */
/ By using this scheme it saves the user from having to */
/ be prompted for 3 file names. */
/ If you want multiple copies / versions on disk either */
/ rename the old versions or specify a different directory in */
/ the path parameter. */
FORM PROCESS.
MOVE PATH TO FN1.
CASE MAIN.
WHEN 'Y'.
IF DSNAME NE SPACE.
WRITE DSNAME TO FN1+66. "rel 4
ELSE.
WRITE R-NAME TO FN1+66. "rel 4
ENDIF.
WHEN OTHERS.
WRITE R-NAME TO FN1+66. "rel 4
ENDCASE.
MOVE FN1 TO FN2.
MOVE FN1 TO FN3.
WRITE '.HHH' TO FN1+124(4). "rel 4
WRITE '.FFF' TO FN2+124(4). "rel 4
WRITE '.EEE' TO FN3+124(4). "rel 4
CONDENSE FN1 NO-GAPS.
CONDENSE FN2 NO-GAPS.
CONDENSE FN3 NO-GAPS.
NAME = R-NAME.
CASE FUNC.
WHEN 'D'.
PERFORM DOWNLOAD_OBJECTS.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been unloaded' TO LINE+55.
CONDENSE LINE.
WRITE: / LINE.
DESCRIBE TABLE T LINES I.
IF I = 0.
WRITE: / 'No Dynpros were found for unload function'.
ELSE.
WRITE: / 'The following Dynpros have been unloaded : '.
PERFORM LOOP_THROUGH_T.
ENDIF.
WHEN 'U'.
PERFORM UPLOAD_OBJECTS.
DESCRIBE TABLE T LINES I.
CASE I.
WHEN 0.
WRITE: / 'No Dynpros were found for restore function'.
WHEN OTHERS.
WRITE: / 'The following Dynpros have been restored : '.
PERFORM LOOP_THROUGH_T.
ENDCASE.
IF MAIN EQ 'Y'.
CASE OLDNAME.
WHEN SPACE.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been restored' TO LINE+55.
CONDENSE LINE.
WRITE: / LINE.
WHEN OTHERS.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been restored - original name :'
TO LINE+55.
WRITE OLDNAME TO LINE+92.
CONDENSE LINE.
WRITE: / LINE.
ENDCASE.
ELSE.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been restored' TO LINE+55.
CONDENSE LINE.
WRITE: / LINE.
ENDIF.
ENDCASE.
ENDFORM.
/ print progname + dynpro nrs that have been processed. */
FORM LOOP_THROUGH_T.
LOOP AT T.
CLEAR LINE.
WRITE R-NAME TO LINE.
WRITE T-NUMBER TO LINE+50.
CONDENSE LINE.
WRITE: / LINE.
ENDLOOP.
ENDFORM.
/ Download Objects */
FORM DOWNLOAD_OBJECTS.
PERFORM UNLOAD_ABAP. "ABAP source, texts, attr
SELECT SINGLE * FROM TRDIR
WHERE NAME EQ R-NAME.
IF TRDIR-SUBC = 'I'.
CASE INCLUDES. "Included file wanted
WHEN 'Y'.
PERFORM SCAN4-INCLUDES.
ENDCASE.
ENDIF.
PERFORM UNLOAD_CUA. "CUA stuff
PERFORM DOWNLOAD_DATA. "Download EEE file to PC
PERFORM BUILD_T. "Build table of all dynpros in ABAP
DESCRIBE TABLE T LINES I.
CASE I.
WHEN 0. "if no dynpros exist then cannot download any
PERFORM DOWNLOAD_DATA. "Download EEE file to PC
WHEN OTHERS.
PERFORM UNLOAD_DYNPROS. "Get Raw dynpros from SAP
PERFORM UNLOAD_DYNPRO_COMPONENTS."Convert to table
PERFORM DOWNLOAD_DATA. "Download ABAP etc. to PC
PERFORM DOWNLOAD_BIN_H1. "Download dynpro header
PERFORM DOWNLOAD_BIN_F1. "Download dynpro fields
ENDCASE.
ENDFORM.
/ Split ABAP up into its component parts */
/ A) Program source (72) */
/ B) Texts (132) */
/ C) Attributes (117) */
/ D) CUA stuff (Various) */
FORM UNLOAD_ABAP.
/ Get ABAP language. Only required on download. */
SELECT SINGLE * FROM TRDIR
WHERE NAME EQ R-NAME.
MOVE TRDIR-RLOAD TO R-LANGUAGE.
READ REPORT R-NAME INTO S. "Get source into table S
MOVE '????SRCE' TO S-TXT.
INSERT S INDEX 1.
/ Text elements, Numbered texts, headings, selection texts */
/ Read text elements with logon language. If they don't */
/ exist read with the value taken from TRDIR. */
READ TEXTPOOL R-NAME INTO U LANGUAGE SY-LANGU.
IF SY-SUBRC NE 0.
READ TEXTPOOL R-NAME INTO U LANGUAGE R-LANGUAGE.
ENDIF.
DESCRIBE TABLE U LINES I.
CASE I.
WHEN 0.
WHEN OTHERS.
MOVE '????TEXT' TO S-TXT.
APPEND S.
LOOP AT U.
MOVE U-TXT TO S-TXT.
APPEND S.
DELETE U.
ENDLOOP.
ENDCASE.
/ Retrieve Attributes from TRDIR and add to table S */
/ Change language to logged on language */
MOVE '????ATTR' TO S-TXT.
APPEND S.
SELECT SINGLE * FROM TRDIR
WHERE NAME EQ R-NAME.
MOVE SY-LANGU TO TRDIR-RLOAD.
MOVE-CORRESPONDING TRDIR TO DIR.
MOVE DIR TO S-TXT.
APPEND S.
ENDFORM.
/ retrieve CUA stuff and append to table S. */
FORM UNLOAD_CUA.
MOVE R-NAME TO EU_KEY-NAME. "Program name for CUA
MOVE 'D' TO EU_KEY-SPRSL. "CUA seems to want D as lang
MOVE R-LANGUAGE TO EU_KEY-SPRSL. "Language "rel 2.2
IMPORT STA FUN MEN MTX ACT BUT PFK SET LAST INC STX DOC "rel 2.2
IMPORT STA STX FUN MEN MTX ACT BUT PFK SET LAST INC DOC "rel 3.0
ATT FDN MDN SYM FIN "rel 3.0
FROM DATABASE EUDB(CU) ID EU_KEY.
IF SY-SUBRC NE 0. "No statuses
EXIT.
ENDIF.
read titles in logged on language. If not present use
language from TRDIR.
CASE REL3.
WHEN SPACE. "(rel 4)
SELECT * FROM RSMPTEXTS WHERE PROGNAME EQ R-NAME
AND SPRSL = SY-LANGU.
MOVE-CORRESPONDING RSMPTEXTS TO FTX.
APPEND FTX.
ENDSELECT.
IF SY-SUBRC NE 0.
SELECT * FROM RSMPTEXTS WHERE PROGNAME EQ R-NAME
AND SPRSL = R-LANGUAGE.
MOVE-CORRESPONDING RSMPTEXTS TO FTX.
APPEND FTX.
ENDSELECT.
ENDIF.
DESCRIBE TABLE FTX LINES I.
IF I > 0.
MOVE '????FTXT' TO S-TXT.
APPEND S.
LOOP AT FTX.
MOVE FTX TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
WHEN OTHERS.
SELECT * FROM TITLE WHERE PROGNAME EQ R-NAME
AND DDLANGUAGE EQ SY-LANGU.
MOVE-CORRESPONDING TITLE TO TIT.
APPEND TIT.
ENDSELECT.
IF SY-SUBRC NE 0.
SELECT * FROM TITLE WHERE PROGNAME EQ R-NAME
AND DDLANGUAGE EQ R-LANGUAGE.
MOVE-CORRESPONDING TITLE TO TIT.
APPEND TIT.
ENDSELECT.
ENDIF.
ENDCASE.
DESCRIBE TABLE STA LINES I.
IF I > 0.
MOVE '????STAT' TO S-TXT.
APPEND S.
LOOP AT STA.
MOVE STA TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE FUN LINES I.
IF I > 0.
MOVE '????FUNC' TO S-TXT.
APPEND S.
LOOP AT FUN.
MOVE FUN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE MEN LINES I.
IF I > 0.
MOVE '????MEN1' TO S-TXT.
APPEND S.
LOOP AT MEN.
MOVE MEN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE MTX LINES I.
IF I > 0.
MOVE '????MTX1' TO S-TXT.
APPEND S.
LOOP AT MTX.
MOVE MTX TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE ACT LINES I.
IF I > 0.
MOVE '????ACTN' TO S-TXT.
APPEND S.
LOOP AT ACT.
MOVE ACT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE BUT LINES I.
IF I > 0.
MOVE '????BUTN' TO S-TXT.
APPEND S.
LOOP AT BUT.
MOVE BUT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE PFK LINES I.
IF I > 0.
MOVE '????PFKY' TO S-TXT.
APPEND S.
LOOP AT PFK.
MOVE PFK TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE SET LINES I.
IF I > 0.
MOVE '????SETS' TO S-TXT.
APPEND S.
LOOP AT SET.
MOVE SET TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
IF LAST NE SPACE.
MOVE '????LIST' TO S-TXT.
APPEND S.
MOVE LAST TO S-TXT.
APPEND S.
ENDIF.
DESCRIBE TABLE INC LINES I.
IF I > 0.
MOVE '????INCL' TO S-TXT.
APPEND S.
LOOP AT INC.
MOVE INC TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE STX LINES I.
IF I > 0.
MOVE '????STXT' TO S-TXT.
APPEND S.
LOOP AT STX.
MOVE STX TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE DOC LINES I.
IF I > 0.
MOVE '????DOCN' TO S-TXT.
APPEND S.
LOOP AT DOC.
MOVE DOC TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE TIT LINES I.
IF I > 0.
MOVE '????TITL' TO S-TXT.
APPEND S.
LOOP AT TIT.
MOVE TIT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
Next 5 tables are rel 3.0 specific (ATT, FDN, MDN, SYM, FIN)
DESCRIBE TABLE ATT LINES I.
IF I > 0.
MOVE '????VATT' TO S-TXT.
APPEND S.
LOOP AT ATT.
MOVE ATT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE FDN LINES I.
IF I > 0.
MOVE '????VFDN' TO S-TXT.
APPEND S.
LOOP AT FDN.
MOVE FDN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE MDN LINES I.
IF I > 0.
MOVE '????VMDN' TO S-TXT.
APPEND S.
LOOP AT MDN.
MOVE MDN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE SYM LINES I.
IF I > 0.
MOVE '????VSYM' TO S-TXT.
APPEND S.
LOOP AT SYM.
MOVE SYM TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE FIN LINES I.
IF I > 0.
MOVE '????VFIN' TO S-TXT.
APPEND S.
LOOP AT FIN.
MOVE FIN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
ENDFORM.
/ Upload Objects. */
FORM UPLOAD_OBJECTS.
PERFORM UPLOAD_EEE. "ABAP,texts,attr dynpro logic
DESCRIBE TABLE E1 LINES I.
IF I > 0. "Do dynpro components exist
PERFORM UPLOAD_HHH. "dynpro header
PERFORM UPLOAD_FFF. "dynpro fields.
PERFORM RECONSTRUCT_DYNPROS. "load + gen dynpros
ENDIF.
ENDFORM.
/ Build table containing dynpro names and numbers */
FORM BUILD_T.
SELECT * FROM D020S WHERE PROG EQ R-NAME.
T-NUMBER = D020S-DNUM.
T-NAME = D020S-PROG.
APPEND T.
ENDSELECT.
ENDFORM.
/ Split dynpros into constituent parts. */
FORM UNLOAD_DYNPROS.
MOVE 'Y' TO FIRST-TIME.
LOOP AT T.
REFRESH: F, E.
CLEAR: H, F, E.
PERFORM BUILD_HHH. "Dynpro Header
PERFORM BUILD_FFF. "Dynpro Fields
PERFORM BUILD_EEE_DYNP. "Dynpro Logic
ENDLOOP.
ENDFORM.
/ Header H length 284. */
FORM BUILD_HHH.
MOVE T-NAME TO DYNNAME(40). "rel 4.
MOVE T-NUMBER TO DYNNAME+40(4). "rel 4.
IMPORT DYNPRO H F E M ID DYNNAME.
MOVE T-NAME TO H1-NAME.
MOVE T-NUMBER TO H1-NUMBER.
MOVE-CORRESPONDING H TO H1.
APPEND H1.
ENDFORM.
/ Fields D021S Len 87. */
FORM BUILD_FFF.
MOVE T-NAME TO F1-NAME.
MOVE T-NUMBER TO F1-NUMBER.
LOOP AT F.
MOVE-CORRESPONDING F TO F1.
APPEND F1.
DELETE F.
ENDLOOP.
ENDFORM.
/ Dynpro Logic D022S E */
FORM BUILD_EEE_DYNP.
MOVE T-NAME TO E1-NAME.
MOVE T-NUMBER TO E1-NUMBER.
LOOP AT E.
MOVE-CORRESPONDING E TO E1.
APPEND E1.
DELETE E.
ENDLOOP.
ENDFORM.
/ Unload Constituent parts of dynpro. */
FORM UNLOAD_DYNPRO_COMPONENTS.
MOVE '????LOGC' TO S-TXT.
APPEND S.
LOOP AT E1.
MOVE E1 TO S-TXT.
APPEND S.
DELETE E1.
ENDLOOP.
FREE E1.
LOOP AT T.
MOVE 'N' TO FOUND.
SELECT SINGLE * FROM D020T "use logged on language
WHERE PROG EQ T-NAME
AND DYNR EQ T-NUMBER
AND LANG EQ SY-LANGU.
IF SY-SUBRC NE 0. "try original language.
SELECT SINGLE * FROM D020T
WHERE PROG EQ T-NAME
AND DYNR EQ T-NUMBER
AND LANG EQ R-LANGUAGE.
ENDIF.
IF SY-SUBRC EQ 0.
IF FOUND = 'N'.
MOVE '????DTIT' TO S-TXT.
APPEND S.
MOVE 'Y' TO FOUND.
ENDIF.
MOVE T-NAME TO S-TXT.
WRITE T-NUMBER TO S-TXT+8(4).
WRITE D020T-DTXT TO S-TXT+12(60).
APPEND S.
ENDIF.
MOVE 'N' TO FOUND.
SELECT * FROM D021T
WHERE PROG EQ T-NAME
AND DYNR EQ T-NUMBER
AND LANG EQ SY-LANGU. "logged on language
IF FOUND = 'N'.
MOVE '????DTXT' TO S-TXT.
APPEND S.
MOVE 'Y' TO FOUND.
ENDIF.
MOVE-CORRESPONDING D021T TO DTXT.
MOVE DTXT TO S-TXT.
APPEND S.
ENDSELECT.
CASE SY-SUBRC.
WHEN 0.
WHEN OTHERS. "try original language
SELECT * FROM D021T
WHERE PROG EQ T-NAME
AND DYNR EQ T-NUMBER
AND LANG EQ R-LANGUAGE.
IF FOUND = 'N'.
MOVE '????DTXT' TO S-TXT.
APPEND S.
MOVE 'Y' TO FOUND.
ENDIF.
MOVE-CORRESPONDING D021T TO DTXT.
MOVE DTXT TO S-TXT.
APPEND S.
ENDSELECT.
ENDCASE.
ENDLOOP.
ENDFORM.
/ Build the original dynpro component tables. */
/ Table H1 contains 1 entry for each dynpro. H1 contains */
/ the header for the dynpro prefixed by the program name */
/ and dynpro number. */
/ By looping round this table we can re-build the F */
/ (Fields) and E (Logic) components. By stripping off the */
/ program name and dynpro number the original tables are */
/ re-created. (Tables F1 and E1 also have a prefix of */
/ Program name and dynpro nr). */
/ After the original set of tables has been re-created we */
/ use R3 - SYSTEM-CALL (rel 2.2) to generate the screen */
/ and then get the next entry in table H1 to build the */
/ next screen. For releases 3.0 and higher use generate */
/ dynpro. */
FORM RECONSTRUCT_DYNPROS.
LOOP AT H1.
CASE MAIN.
WHEN 'Y'.
if h1-name ne repid.
IF H1-NAME NE R1-NAME.
MOVE H1-NAME TO OLDNAME.
ENDIF.
ENDCASE.
PERFORM RECONSTRUCT_F.
PERFORM RECONSTRUCT_E.
MOVE-CORRESPONDING H1 TO H.
IF MAIN = 'Y'.
move repid to h-prog.
MOVE R1-NAME TO H-PROG.
move repid to dynname.
MOVE R1-NAME TO DYNNAME.
ELSE.
MOVE H1-NAME TO H-PROG.
MOVE H1-NAME TO DYNNAME.
ENDIF.
MOVE H1-NUMBER TO H-DNUM.
WRITE H1-NUMBER TO DYNNAME+40(4).
EXPORT DYNPRO H F E M ID DYNNAME.
SYSTEM-CALL GENERATE-SCREEN DYNNAME. "Up to rel 2.2
GENERATE DYNPRO H F E M ID DYNNAME "R 3.0, 4.0, 4.5
MESSAGE DYNPRO_MESSAGE
LINE DYNPRO_LINE
WORD DYNPRO_WORD.
REFRESH: M, F, E.
CLEAR: M, H, F, E.
ENDLOOP.
ENDFORM.
/ Re-build Fields table */
FORM RECONSTRUCT_F.
LOOP AT F1 WHERE NAME EQ H1-NAME AND
NUMBER EQ H1-NUMBER.
MOVE-CORRESPONDING F1 TO F.
APPEND F.
ENDLOOP.
ENDFORM.
/ Re-build Logic table */
FORM RECONSTRUCT_E.
LOOP AT E1 WHERE NAME EQ H1-NAME AND
NUMBER EQ H1-NUMBER.
MOVE-CORRESPONDING E1 TO E.
APPEND E.
ENDLOOP.
ENDFORM.
/ scan for included files (Upload) */
FORM SCAN4-INCLUDES.
IF FUNC = 'D'. "Downloads - whole table needs to be scanned
LOOP AT S.
PERFORM SEARCH-FUNC.
ENDLOOP.
ENDIF.
IF FUNC = 'U'. "On upload scan line by line as we are re-building abap
PERFORM SEARCH-FUNC.
ENDIF.
ENDFORM.
/ scan for text INCLUDE xxxxxxxx */
/ reject INCLUDE STRUCTURE as structure not a valid */
/ program name */
FORM SEARCH-FUNC.
CONDENSE S-TXT.
SEARCH S-TXT FOR '.INCLUDE .'.
CASE SY-SUBRC.
WHEN 0.
IF S-TXT+8(9) EQ 'STRUCTURE'
OR S-TXT+8(9) EQ 'structure'
OR S-TXT+8(6) EQ '<ICON>' "rel 3.0c 3.0d
OR S-TXT+8(6) EQ '<icon>'
OR S-TXT+8(6) EQ '<type>'
OR S-TXT+8(6) EQ '<TYPE>'
OR S-TXT+8(9) EQ '<methods>'
OR S-TXT+8(9) EQ '<METHODS>'.
EXIT.
ENDIF.
IF SY-FDPOS EQ 0. "INCLUDE must be in pos 1 (by reason of condense)
PERFORM VALIDATE_INCLUDE.
ELSE.
EXIT.
ENDIF.
ENDCASE.
ENDFORM.
/ Validate INCLUDES . */
FORM VALIDATE_INCLUDE.
SEARCH S-TXT FOR '...' STARTING AT 9 ENDING AT 39.
CASE SY-SUBRC.
WHEN 0.
WHEN OTHERS.
SEARCH S-TXT FOR '. .' STARTING AT 9 ENDING AT 38.
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
ENDCASE.
IX = SY-FDPOS.
ASSIGN S-TXT+8(IX) TO <F>.
Now check for Include Mask for example if include mask was set to
Z* then only include programs whose first letter starts with a Z.
1) get length of the INCLUDE program name. Must be less than or
equal 40.
2) Compare it with the Include mask.
3) If Ok add include program name to include table
clear i_include.
move <f> to i_include-name.
CLEAR I_INCL.
SEARCH IMASK FOR '.*.'.
IF SY-SUBRC = 0.
CONDENSE IMASK.
ENDIF.
IF ( <F> CP IMASK OR IMASK = ' ' ).
READ TABLE I_INCL WITH KEY = <F>.
IF SY-SUBRC NE 0.
MOVE <F> TO I_INCL-NAME.
move 1 to i_include-count.
collect i_include.
APPEND I_INCL.
ENDIF.
ENDIF.
ENDFORM.
/ Download table S. */
FORM DOWNLOAD_DATA.
CLEAR TXLINE.
WRITE 'Downloading ' TO TXLINE.
WRITE R1-NAME TO TXLINE+12.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TXLINE
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FN3
FILETYPE = 'ASC'
TABLES
DATA_TAB = S.
ENDFORM.
/ Download Binary files H1 */
FORM DOWNLOAD_BIN_H1.
DESCRIBE FIELD H1 LENGTH J.
DESCRIBE TABLE H1 LINES I.
NR_OF_BYTES = I * J.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FN1
FILETYPE = 'BIN'
BIN_FILESIZE = NR_OF_BYTES
IMPORTING
FILELENGTH = FILESIZE
TABLES
DATA_TAB = H1.
ENDFORM.
/ Download Binary files F1 */
FORM DOWNLOAD_BIN_F1.
DESCRIBE FIELD F1 LENGTH J.
DESCRIBE TABLE F1 LINES I.
NR_OF_BYTES = I * J.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FN2
FILETYPE = 'BIN'
BIN_FILESIZE = NR_OF_BYTES
IMPORTING
FILELENGTH = FILESIZE
TABLES
DATA_TAB = F1.
ENDFORM.
/ Upload data from file .EEE */
FORM UPLOAD_EEE.
CLEAR TXLINE.
WRITE 'Uploading ' TO TXLINE.
WRITE R1-NAME TO TXLINE+10.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TXLINE
EXCEPTIONS
OTHERS = 1.
MOVE 'Y' TO FIRST-TIME.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN3
FILETYPE = 'ASC'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = S1.
LOOP AT S1.
IF S1-TXT(4) = '????'.
MOVE S1-TXT(8) TO NEW-FUNC.
IF FIRST-TIME = 'Y'.
MOVE S1-TXT(8) TO OLD-FUNC.
MOVE 'N' TO FIRST-TIME.
ELSE.
PERFORM STORE_COMPONENT.
MOVE NEW-FUNC TO OLD-FUNC.
ENDIF.
ENDIF.
IF S1-TXT(4) NE '????'.
PERFORM REBUILD-COMPONENT.
ENDIF.
ENDLOOP.
PERFORM STORE_COMPONENT. "last component still to be processed
PERFORM REBUILD-CUA. "re-build CUA, statuses, pfk etc
ENDFORM.
/ Upload Dynpro headers (HHH) and fields (FFF) */
/ titles and dynpro logic is contained in file .EEE */
/ and has already been processed. */
FORM UPLOAD_HHH.
CASE REL3.
WHEN 'X'.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN1
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = H2.
LOOP AT H2.
MOVE H2-CNAME TO H1-NAME.
MOVE H2-CNUM TO H1-NUMBER.
MOVE H2-NNAME TO H1-PROG.
MOVE H2-NNUM TO H1-DNUM.
MOVE H2-CTIM TO H1-TGEN.
WRITE '19' TO H1-DGEN(2).
WRITE H2-CDAT TO H1-DGEN+2(6).
WRITE H2-FILL TO H1+88(39).
APPEND H1.
ENDLOOP.
WHEN OTHERS.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN1
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = H1.
ENDCASE.
LOOP AT H1.
MOVE H1-NAME TO T-NAME.
MOVE H1-NUMBER TO T-NUMBER.
APPEND T.
ENDLOOP.
ENDFORM.
/ Upload Binary file F1 - Dynpro fields */
FORM UPLOAD_FFF.
CASE REL3.
WHEN 'X'.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN2
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = F2.
LOOP AT F2.
OLD_F1 = F2.
APPEND OLD_F1.
ENDLOOP.
LOOP AT OLD_F1.
MOVE-CORRESPONDING OLD_F1 TO F1.
APPEND F1.
ENDLOOP.
WHEN OTHERS.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN2
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = F1.
ENDCASE.
ENDFORM.
/ Re-construct data from file .EEE */
FORM REBUILD-COMPONENT.
CASE OLD-FUNC.
WHEN '????LOGC'. "Dynpro LOGIC.
CASE REL3.
WHEN 'X'.
SHIFT S1-TXT+8 RIGHT BY 32 PLACES.
ENDCASE.
MOVE S1-TXT TO E1.
APPEND E1.
/ Load ABAP Source code, CUA, pfkeys etc to int tables */
WHEN '????SRCE'.
MOVE S1-TXT TO S-TXT.
APPEND S.
CASE INCLUDES. "Included file wanted
WHEN 'Y'.
PERFORM SCAN4-INCLUDES.
ENDCASE.
if restoring / uploading rel 3.1 or lower different cua tables
are used. At generate CUA time these will be converted by the
system to rel 4.0
WHEN '????STAT'.
CASE REL3.
WHEN 'X'.
MOVE S1-TXT TO OLD_STA.
APPEND OLD_STA.
WHEN SPACE.
MOVE S1-TXT TO STA.
APPEND STA.
ENDCASE.
MOVE 'Y' TO CUA-FLAG.
WHEN '????FUNC'.
CASE REL3.
WHEN 'X'.
MOVE S1-TXT TO OLD_FUN.
APPEND OLD_FUN.
WHEN SPACE.
MOVE S1-TXT TO FUN.
APPEND FUN.
ENDCASE.
MOVE 'Y' TO CUA-FLAG.
WHEN '????MEN1'.
CASE REL3.
WHEN 'X'.
MOVE S1-TXT TO OLD_MEN.
APPEND OLD_MEN.
WHEN SPACE.
MOVE S1-TXT TO MEN.
APPEND -
How to delete the row in table control with respect to one field in module pool programming?
Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MSHI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'DELETE'.
LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
APPEND LS_SOURCE TO LT_RESTORE.
DELETE TABLE LT_SOURCE FROM LS_SOURCE.
SOURCE-LINES = SOURCE-LINES - 1.
ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field. -
How to use table maintenance view in module pool screen
hi ,
want to use table maintenance view in a module pool screen so that i can edit, insert, delete and update date in to the ztable.please help.You can simply call it via SM30. Or you can call the table maintence view from any program(report or module pool) using a function module.
call function 'VIEW_MAINTENANCE_CALL'
exporting
action = 'U'
view_name = 'Z_Table_Name'
exceptions
client_reference = 1
foreign_lock = 2
invalid_action = 3
no_clientindependent_auth = 4
no_database_function = 5
no_editor_function = 6
no_show_auth = 7
no_tvdir_entry = 8
no_upd_auth = 9
only_show_allowed = 10
system_failure = 11
unknown_field_in_dba_sellist = 12
view_not_found = 13
others = 14.
Regards,
RIch Heilman -
Error while transporting modification in module pool of a specific infotype
HI experts,
While transporting some modifications that have be done on the PAI of a module pool of a specific infotype, we have an error with code return = 8, the error is --> Original object R3TRPROGMP900730 must not be changed!!!
Any suggestion .
Tanhks a lot .Hi ,
Nice to know that your problem is solved. If any of the replies were usefull please acknowledge their work.
And it would be great if you can just put in your remarks about the best solution you had in solving that problem.
It might be useful to other users when they encoutner such problem.
BR,
Vijay. -
Getting error while calling a subscreen in module pool program
HI ALL,
ACTUALLY I'M GETTING A SYNTAX ERROR WHILE I'M CALLING A SUBSCREEN
IN A MODULE POOL PROGRAM IN PAI MODULE
THE ERROR IS AS FOLLOW
"." or "ID ... FIELD ..." expected after "SUBSCREEN"
CAN ANYBODY PLS HELP ME.
REGARDS
ANDREWSHI MAX ,
THE CODE IS AS FOLLOWS:
*& Report ZTABSTRIP_PS
REPORT ZTABSTRIP_PS.
type-pools : vrm.
DATA:number1 type I,
number2 type I,
result type I,
ok_code like SY-UCOMM,
employee1 type c,
ABAP(19) type c,
SALES(19) type c,
HR(19) type c,
MM(19) type c,
employee type c.
emp type c.
CONTROLS tabstrip TYPE TABSTRIP.
CALL SCREEN 100.
call screen 110.
call screen 130.
call screen 120.
call screen 140.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'TITLE'.
CASE OK_CODE.
WHEN 'BACK' or 'EXIT' or 'DELETE'.
leave program.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
WHEN 'BACK'.
leave PROGRAM.
when 'EXIT' or 'DELETE'.
leave to screen 0.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
endcase.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
when 'TAB1'.
tabstrip-activetab = 'TAB1'.
when 'TAB2'.
tabstrip-activetab = 'TAB2'.
result = number1 + number2.
when 'TAB3'.
tabstrip-activetab = 'TAB3'.
SET TITLEBAR 'TITLE1'.
when 'TAB4'.
tabstrip-activetab = 'TAB4'.
if employee = 'NEERAJ'.
ABAP = 'NEERAJ'.
elseif employee = 'UMESH'.
SALES = 'UMESH'.
ELSEIF employee = 'RAM'.
HR = 'RAM'.
elseif employee = 'ANIL'.
MM = 'ANIL'.
endif.
employee = employee.
WHEN 'BACK'.
leave PROGRAM.
when 'EXIT' or 'DELETE'.
leave to screen 0.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
ENDCASE.
WHEN 'BACK' or 'EXIT' or 'DELETE'.
leave program .
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
endcase.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0110 OUTPUT
text
**MODULE STATUS_0110 OUTPUT.
SET PF-STATUS 'STATUS1'.
SET TITLEBAR 'xxx'.
**case ok_code.
**WHEN 'back' or 'exit' or 'delete'.
leave PROGRAM.
WHEN 'save'.
MESSAGE 'please choose a valid function ' TYPE 'W'.
ENDCASE.
**ENDMODULE. " STATUS_0110 OUTPUT
*& Module USER_COMMAND_0110 INPUT
text
MODULE USER_COMMAND_0110 INPUT.
number1 = number1.
number2 = number2.
CLEAR NUMBER1.
CLEAR NUMBER2.
REFRESH NUMBER1.
REFRESH NUMBER2.
ENDMODULE. " USER_COMMAND_0110 INPUT
*& Module STATUS_0130 OUTPUT
text
MODULE STATUS_0130 OUTPUT.
SET PF-STATUS 'STATUS2'.
SET TITLEBAR 'xxx'.
RESULT = number1 + number2.
*CLEAR RESULT.
REFRESH RESULT.
ENDMODULE. " STATUS_0130 OUTPUT
*& Module STATUS_0120 OUTPUT
text
MODULE STATUS_0120 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
DATA: l_name TYPE vrm_id,
li_list TYPE vrm_values,
l_value LIKE LINE OF li_list.
l_value-key = '1'.
l_value-text = 'ANIL'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '2'.
l_value-text = 'RAM'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '3'.
l_value-text = 'NEERAJ'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '4'.
l_value-text = 'UMESH'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_name = 'employee'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
ID = l_name
VALUES = li_list
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR li_list.
ENDMODULE. " STATUS_0120 OUTPUT
*& Module USER_COMMAND_0120 INPUT
text
MODULE USER_COMMAND_0120 INPUT.
INCLUDING sy-repid '140'.
employee1 = employee.
IF employee1 CS 'NEERAJ'.
call SUBSCREEN sub4 .
ABAP = 'NEERAJ'.
CLEAR ABAP.
ELSEIF employee1 CS 'UMESH'.
call SUBSCREEN sub4 .
SALES = 'UMESH'.
CLEAR SALES.
elseif employee1 CS 'RAM'.
call SUBSCREEN sub4 .
HR = 'RAM'.
CLEAR HR.
ELSEIF employee1 CS 'ANIL'.
call SUBSCREEN sub4 .
MM = 'ANIL'.
CLEAR MM.
endif.
ENDMODULE. " USER_COMMAND_0120 INPUT
*& Module STATUS_0140 OUTPUT
text
MODULE STATUS_0140 OUTPUT.
*CASE OK_CODE.
WHEN employee1 'NEERAJ'.
screen-active = 1.
ABAP = 'NEERAJ'.
WHEN employee1 = 'UMESH'.
screen-active = 1.
SALES = 'UMESH'.
WHEN employee1 = 'RAM'.
screen-active = 1.
HR = 'RAM'.
WHEN employee1 = 'ANIL'.
screen-active = 1.
MM = 'ANIL'.
endif.
*ENDCASE.
ENDMODULE. " STATUS_0140 OUTPUT -
Module pool - table control - update ztable
hello , i doing a module pool that will have few screens , now i have one screen with a table control that fetch the data from a ztable when screen is call the table control is showing the data and is in grey and no editable i add a pf-status for change that mode i can delete the row from the table control but i don't figure out how update to the ztable when i press save , i wan't too another button for add a new row ( and remain the already in grey ) for add new entrie in the table and update the ztable
pd: sorry for my bad english
this is my code:
TOP:
PROGRAM z_pp_lote_etiquetas MESSAGE-ID zz.
TABLES:zc2p_lote_etique,
zc2p_lider_modul.
DATA: ok_code LIKE sy-ucomm.
DATA save_ok LIKE sy-ucomm.
* internal table
DATA: it_zc2p_lote_etique LIKE STANDARD TABLE OF zc2p_lote_etique.
DATA: it_zc2p_lider_modul TYPE STANDARD TABLE OF zc2p_lider_modul WITH HEADER LINE.
DATA: it_zc2p_lider_modul_del TYPE STANDARD TABLE OF zc2p_lider_modul WITH HEADER LINE.
**************Workarea
DATA: wa_c2p_lote_etique TYPE zc2p_lote_etique.
DATA: wa_c2p_lider_modul TYPE zc2p_lider_modul.
DATA: wa_c2p_lider_modul_del TYPE zc2p_lider_modul.
DATA: sel.
DATA: MARK.
DATA: init.
DATA: col TYPE scxtab_column.
DATA: lines TYPE i.
* Variable Declaration
DATA : flg, "Flag to set the change mode
ln TYPE i. "No. of records
* Table Control Declartion.
CONTROLS: zc2p_lider_crtl TYPE TABLEVIEW USING SCREEN '101'.
**PROCESS BEFORE OUTPUT INCLUDE **
*& Include Z_PP_LOTE_ETIQUETAS_O01
*& Module set_status OUTPUT
* Setting the GUI status
MODULE status_0100 OUTPUT.
SET PF-STATUS 'Z_PP_LOT_ETIQ_MENU'.
SET TITLEBAR 'Z_PP_LOT_ETIQ'.
ENDMODULE. " set_status OUTPUT screen 100
* MODULE status_0101 OUTPUT
* Setting the GUI status
MODULE status_0101 OUTPUT.
SET PF-STATUS 'Z_PP_LOT_ETIQ_ME_101'.
SET TITLEBAR 'Z_PP_LOT_ETIQ'.
* Data retreving
if init is INITIAL.
select * from zc2p_lider_modul into CORRESPONDING FIELDS OF TABLE it_zc2p_lider_modul.
DESCRIBE TABLE it_zc2p_lider_modul LINES ln.
zc2p_lider_crtl-lines = ln + 10.
init = 'X'.
endif.
ENDMODULE. "status_0101 OUTPUT
module change_sdyn_conn output.
* you can change the content of current table control line via
* sdyn_conn
READ TABLE it_zc2p_lider_modul INTO zc2p_lider_modul INDEX zc2p_lider_crtl-current_line.
endmodule. " FILL_TABLE_CONTROL OUTPUT
MODULE set_screen_fields OUTPUT.
LOOP AT SCREEN.
IF flg IS INITIAL.
screen-input = 0.
ELSE.
screen-input = 1.
ENDIF.
*ENDIF.
* Modifying the screen after making changes
MODIFY SCREEN.
ENDLOOP.
ENDMODULE. " set_screen_fields OUTPUT
PROCESS AFTER INPUT INCLUDE.
* MODULE USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'LIDM'.
CALL SCREEN 101.
WHEN 'CANC'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE PROGRAM.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. "USER_COMMAND_0100 INPUT
* MODULE USER_COMMAND_0101 INPUT
MODULE user_command_0101 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
WHEN 'SORT'.
DATA: fldname(100),help(100).
READ TABLE zc2p_lider_crtl-cols INTO col WITH KEY selected = 'X'.
SPLIT col-screen-name AT '-' INTO help fldname.
SORT it_zc2p_lider_modul BY (fldname).
WHEN 'CHANGE'.
* Setting the flag to make the table control in editable mode[excluding
* primary key].
flg = 'Y'.
WHEN 'BACK'.
CALL SCREEN 100.
LEAVE SCREEN.
WHEN 'CANCEL'.
LEAVE PROGRAM.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'SAVE'.
MODIFY zc2p_lider_modul FROM it_zc2p_lider_modul.
COMMIT WORK.
ENDCASE.
ENDMODULE. "USER_COMMAND_0101 INPUT
* MODULE read_table_control INPUT
MODULE read_table_control INPUT.
* Check input values
IF mark = 'X' AND save_ok = 'DELETE'.
DELETE TABLE it_zc2p_lider_modul FROM zc2p_lider_modul.
DESCRIBE TABLE it_zc2p_lider_modul LINES zc2p_lider_crtl-lines.
ENDIF.
ENDMODULE. " READ_TABLE_CONTROL INPUT
Screen Flow Logic 100
PROCESS BEFORE OUTPUT.
MODULE status_0100.
PROCESS AFTER INPUT.
MODULE user_command_0100.
Screen Flow Logic 101.
PROCESS BEFORE OUTPUT.
MODULE status_0101.
LOOP AT it_zc2p_lider_modul INTO zc2p_lider_modul WITH CONTROL
zc2p_lider_crtl.
* Dynamic screen modifications
MODULE set_screen_fields.
MODULE change_sdyn_conn.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_command_0101.
LOOP AT it_zc2p_lider_modul.
MODULE read_table_control.
ENDLOOP.
i hope somebody can help for what i missing here thanks>
Sanjeev Kumar wrote:
> Hello Edgar,
>
> Problem seems to be there in the flow logic of 101
>
>
> PROCESS BEFORE OUTPUT.
> MODULE status_0101.
> LOOP AT it_zc2p_lider_modul INTO zc2p_lider_modul WITH CONTROL
> zc2p_lider_crtl. " no need to have 'INTO zc2p_lider_modul' above
> * Dynamic screen modifications
> MODULE set_screen_fields.
> MODULE change_sdyn_conn.
> ENDLOOP.
> *
> PROCESS AFTER INPUT.
> MODULE user_command_0101. "this should be shifted after the following LOOP...ENDLOOP.
>
> LOOP AT it_zc2p_lider_modul. "need to have 'WITH CONTROL zc2p_lider_crtl' here
> MODULE read_table_control.
> ENDLOOP.
>
>
>
> With MODULE user_command_0101 call before the LOOP calls the MODIFY statement (under case save_ok 'SAVE') first and Z-table is updated with the old values as the changes are transferred from screen into the internal table it_zc2p_lider_modul in the LOOP...ENDLOOP later.
>
> Try these changes and I hope it will work.
>
> Thanks
> Sanjeev
i do the firts advice but the second one i get syntax error :
my code :
PROCESS AFTER INPUT.
LOOP at it_zc2p_lider_modul WITH CONTROL zc2p_lider_crtl.
MODULE read_table_control.
ENDLOOP.
MODULE user_command_0101.
error :
In the event PROCESS AFTER INPUT, no additions are allowed with "LOOP
AT". -
Can we use Initilization event in module pool program?
Hi All,
Can we use Initialization event in module pool program? If not why?
Thanks In Advance!!!!!!!!!The runtime environment creates the INITIALIZATION event and calls the corresponding event block (if it has been defined in the ABAP program).
http://help.sap.com/saphelp_nw70/helpdata/EN/fc/eb2d67358411d1829f0000e829fbfe/content.htm
SEE THE ABOVE LINK...THINK IT WILL SOLVE ALL YOUR DOUBTS
REGARDS
RACHEL -
Module Pool - Table Control - Data not getting displayed in Control
Hi,
I have a table contol in my module pool program. In my processing I am filling an internal table & then in my PBO I am linking the internal table to table control. The issue is that even though the internal table is getting filled correctly (found through debugging), the data is not getting populated in table control. Nothing is populated on screen. I am writing part of code below
Declaration:
Types: begin of ty_control,
SELECTED TYPE C,
TEXT TYPE DPR_CAUSE_T-TEXT,
end of ty_control.
CONTROLS : TBL_CONT TYPE TABLEVIEW USING SCREEN '9001'.
DATA: lt_table_cont type TABLE OF ty_control with header line.
Fields in TBL_CONT:
TBL_CONT-SELECTED
TBL_CONT-TEXT
PBO Flow Logic:
MODULE STATUS_9001.
MODULE fill_data.
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
ENDLOOP.
PAI Flow Logic:
Loop at lt_table_cont.
MODULE UPDATE_DATA.
endloop.
MODULE USER_COMMAND_9001.
PLZ let me know what might be the problem. I have been trying to figure out but cant.
Thanks.Hi Sonali,
When ever you need to do anything with the table control, i mean if u want to display data in table control or you want to validate the data entered in table control Should be done within Loop and Endloop.(PBO or PAI's which ever is appropriate)
Here the data is not bieng displayed in ur table control because you have not used the MODULE fill_data between
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
ENDLOOP.
so do it like this
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
MODULE fill_data
ENDLOOP.
this will solve your problem.
Regards,
Syed -
Hi,
How can we print Descriptions and other text as text lable in module pool????
Thx,
Shashi.Hi,
IF you want text for box heading in moodule pool...
than just double click on that box and write for lable in text part of attribute window.
<REMOVED BY MODERATOR>
Gaurav J.
Edited by: Alvaro Tejada Galindo on Aug 15, 2008 3:46 PM -
Edit a field in ALV tree in a subscreen of a module pool
Hi
I want to make a field editable in the ALV tree based on some condtions in a subscreen of a module pool. I used the edit = 'X' field in the fieldcatalog still it is showing the field as display and not edit.
Please help me to get the field as editable and save it to the database table.
Please not this is ALV TREE
Regards,
MozilaHi Mayank,
Thanks for the reply
I am using oops method.
I tried making the field which is to be made editable as wa_fieldcatalog-edit = 'X'. But its not working. I didnt get you when you said edit in layout object.
I also went through the demo programs but these programs are not having editable fields.
My code is as follows:
IF tree4 IS INITIAL.
* create container for alv-tree
l_tree_container_name = 'TREE4'.
CREATE OBJECT l_custom_container
EXPORTING
container_name = l_tree_container_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
* create tree control
CREATE OBJECT tree4
EXPORTING
i_parent = l_custom_container
i_node_selection_mode = cl_gui_column_tree=>node_sel_mode_multiple
i_item_selection = 'X'
i_no_html_header = 'X'
i_no_toolbar = 'X'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
illegal_node_selection_mode = 5
failed = 6
illegal_column_name = 7.
* create hierarchy
CALL METHOD tree4->set_table_for_first_display
EXPORTING
is_layout = s_layo
CHANGING
it_sort = it_sort
it_outtab = it_final
it_fieldcatalog = it_fieldcat.
ELSE.
CALL METHOD tree4->refresh_table_display
EXPORTING
it_sort = it_sort
EXCEPTIONS
program_error = 1
failed = 2
cntl_system_error = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif. -
Remove field in Alv grid module pool
Hi Experts,
I have a requirement where in I need to remove a field on the display screen for a particular record.
In detail..
I have a created a module pool program where in the final out put was shown using CL_gui_alv_grid on the new screen.The normal display will start with a check box(editable),kunnr,ktokd etc..The requirement is for a particular record the check box should either disappear or disable.Please help me out in achieving this.Thanks in advance.
Initially I got very good response from Neha and Satya and felt very confident enough in the fix but I dont know where I am doing wrong the issue is not yet fixed.Satya or Neha can you tell me where am I doing wrong seeing the below code.
types:BEGIN OF lty_final,
chbox TYPE char1,
org_nam TYPE name1_gp,
vkorg TYPE vkorg,
parvw TYPE parvw,
ktokd TYPE ktokd,
kunnr TYPE kunnr,
pr_cnt TYPE char3,
fir_nam TYPE name1_gp,
las_nam TYPE name1_gp,
parau TYPE parau,
telf1 TYPE telf1,
STYLE TYPE lvc_t_styl, " New field added in the structure
END OF lty_final.
data:lt_final type table of lty_final,
ls_final type lty_final.
DATA : ls_stylerow TYPE lvc_s_styl ,
lt_styletab TYPE lvc_t_styl .
loop at lt_final into ls_final. """Final internal table
if ls_final-pr_cnt = lc_yes.
ls_stylerow-FIELDNAME = 'CHBOX'.
ls_stylerow-STYLE = cl_gui_alv_grid=>mc_style_disabled .
APPEND ls_stylerow TO lt_styletab.
CLEAR ls_stylerow.
ls_final-STYLE = LT_STYLETAB.
MODIFY lt_final INDEX sy-tabix FROM ls_final TRANSPORTING style.
endif.
endloop.
gs_layout-zebra = 'X'.
gs_layout-edit = ' '.
gs_layout-no_rowmark = 'X'.
gs_layout-stylefname = 'LT_STYLETAB'.
CALL METHOD grid_display->set_table_for_first_display
EXPORTING
i_save = 'X'
i_default = 'X'
is_layout = gs_layout
CHANGING
it_outtab = lt_final
it_fieldcatalog = gt_fieldcat
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
With Regards,
Srini...Use the following codes in loop it will work.
Loop at lt_final into ls_final. """Final internal table
if ls_final-pr_cnt = lc_yes.
ls_stylerow-FIELDNAME = 'CHBOX'.
ls_stylerow-STYLE = cl_gui_alv_grid=>mc_style_disabled .
INSERT ls_stylerow INTO TABLE lt_final-STYLE. " use insert
*APPEND ls_stylerow TO lt_styletab.
*CLEAR ls_stylerow.
*ls_final-STYLE = LT_STYLETAB.
*MODIFY lt_final INDEX sy-tabix FROM ls_final TRANSPORTING style.
endif.
endloop.
Regards,
Gurpreet -
Regarding selection-screen in module pool
hi
experts,
i am having doubt in module pool programing...
i want create selection screen(pop screen with field) in modulepool., before the display screeen deatils
ex : if i want display the record details for that particular
record number.......
while i am click on display..
pop-up-selection screen will come with record number field..
i f enter the record no, display s the details...
AnanandPlease see Rich's answer here:
[Dialog programming - How to place a select-option field in a dialog screen;
Rob -
Input must bein module pool and the output should be in ALV report
Dear Friends,
Greetings.....................
Please give me solution for my problem.
Consider there is one module pool screen with the fields empno, edob, ecity.There is one search button.if the user clicks the search button.it should display the employee details based on empno and output must be in ALV reports.
Thanks in advance
RajHi,
Try to use
call function 'REUSE_ALV_POPUP_TO_SELECT'
exporting
i_title = text-021
i_zebra = 'X'
i_tabname = 'P_YSIZE1'
it_fieldcat = p_fieldcat[]
it_excluding = p_excltab[]
i_screen_start_column = 02
i_screen_start_line = 02
i_screen_end_column = 45
i_screen_end_line = 15
importing
e_exit = p_exit
es_selfield = p_selfield
tables
t_outtab = p_ysize1.
a® -
Icon display in Module pool screen not visible to some users
Hi,
I have added an icon in one of the module pool screen with dynamic quick info. The page is rendered fine and the info is also displayed well for most users except some. I can't figure out why the icon is not being displayed for some users.
Do someone has any solution for this?
Thanks,
SumithAs I recall, the icons are actually stored in a file on each PC so some users may have a corrupted or out-of-date file with the icons. You can look for posting on "how to add an icon" to see a discussion on this topic.
I found some useful info at:
Create and Add Icons to table ICON?
Message was edited by: Charles Folwell
Maybe you are looking for
-
Problem with firewall and java on line sites internet explorer
i have been experiencing problems with java on line games because the firewall has blocked usage.On two of them when i press play to play the game a message appears error on page.If i dowload mozilla will i have the same problems? also when downloadi
-
Labview freeze when accessing a custom menu with data on the clipboard
This one has got me stumped: When selecting a custom menu item with data on the clipboard the GUI freezes. Freezes are longer for more data and longer for older versions of Labview. I wrote the test code, attached, but the example "Menu Selection
-
Nokia N95 (CAN'T ABLE TO BROWSE WAP IN 3G)
Dear Experts, i am facing a problem in 3G service in NOKIA N95. i am having the service of 3G when i will connect the internet via WAP it will connect but i cannot able to browse or open any web page and if i will discoonect the wap and try to connec
-
IPad 2 Screen replacement?
My iPad 2 just slipped out of my hand when i was carrying it into my house. I have booked an appointment at Genius Bar but I want to know what Apple will offer in the UK. Do Apple repair iPad screens firstly, or will i need to buy a replacement iPad,
-
How to download Movies from iTunes to iPad
I purchased a movie from iTunes on my iPad. I confirmed purchase and it looked like it was going to download. Nothing shows up in my download tab in iTunes and nothing is in my movies. I tried connecting to my computer but nothing happens then either