Mail app - The email body doesn't appear on iPad.

Mail app - The email body doesn't appear anymore on my iPad2. I've deleted the account and set it up again from scratch, but no luck.
I have an iPhone and everything works fine.
Does anyone have any ideas?

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe!

Similar Messages

  • I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • When we attach photos to an email in the Apple Mail app, the photos appear tiny on gmail accounts.

    When we attach photos to an email in the Apple Mail app, the photos appear tiny on gmail accounts. They are unable to download the file as the size sent. We have tested this in multiple gmail accounts and we have tried sending as different sizes and actual size with no difference. Other photos attached in other ways come through fine. This seems to be a a result of the recent iphotos to photos app update.
    Please advise on if this is a bug with how mail is ending the photos or how gmail is receiving them.

    Try using Mail as the email client for iPhoto and see if that will fix the problem:

  • How can I attach an image without the image is in the email body? (using the new mail the Lion)

    How can I attach an image without the image is in the email body? (using the new mail the Lion)
    I want in attachment, not in the body mail.

    I think your only solution is to zip the image files first and then attach them.
    Read this from a site I found:
    Sending Graphical Attachments -- When you attach a graphical image to your message, the recipient of your message sees the image inline (that is, in the body of the message) if her email client supports inline display. ("Take Control of Email with Apple Mail" contains a table listing the capabilities of popular Mac and PC email clients.) If a client does not support inline display (or the recipient has turned off the inline display option), the file appears as an attachment that must be opened in a separate program.
    On the one hand, an inline image is easier for the recipient to see - all she has to do is look at it. On the other hand, inline images can be frustrating to scroll through. If you do not wish to send a graphical image inline, you must compress the file before attaching it - Mail, sadly, lacks a built-in compression option, though fortunately for Panther users, the Finder offers Zip compression without requiring a separate application.
    Note that when you compose a new message, Mail always shows attachments in the body of your message. You can manually drag them somewhere else, but many email clients display all attachments in a separate list, regardless of where you place them in the message body.
    If you paste an image into a message or drag & drop an image from another window (say, a Web browser), Mail converts the raw image data to an attachment in TIFF format. On the other hand, if you drag & drop the icon of an image file (or use the Attach button to locate the file using the file browser), Mail leaves the attached image in its original format. This difference is significant, because although most email clients can display JPEG images just fine, support for TIFF - especially in non-Mac email clients - is less common. If possible, I suggest attaching image files as opposed to pasting or dragging in raw image data.

  • How can i change from my single app to creative cloud membership? the 'switch plan' doesn't appear in my account?

    how can i change from my single app to creative cloud membership? the 'switch plan' doesn't appear in my account?

    Locking this discussion.  Please see my response at how can i get some help to cancel my single app month to month and/or upgrade to full creative cloud membership? please don't tell me to follow the guidelines because i've tried several times but the options to 'switch plan' or cancel plan' are not availa.
    John T Smith please feel free to also reference this discussion.  I believe it partly explains the frustration individuals face when attempting to cancel their membership.

  • Since installing the latest software update I have been unable to access my mail app.the screen appears blank?

    Since installing the latest software update I have been unable to access my mail app.the screen appears blank?

    Force close the mail app and reset your iPad. See if that fixes it.
    In order to close the mail app, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the mail app and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Facebook app is blocked on "waiting..". I tried to close the app firstly but it doesn't appear on the multitasking. I tried the normal and the hard reset. I tried to move the app in another group with itunes but it is still in "waiting". Any suggestion?

    Facebook app is blocked on "waiting..". I tried to close the app firstly but it doesn't appear on the multitasking. I tried the normal and the hard reset. I tried to move the app in another group with itunes but it is still in "waiting". Any suggestion?

    I can't! Tried to deleteit  from the iphone and from itunes but the X doesn't appear!

  • How to remove the bar above the email body in inbox

    How do I remove the Information / toolbar? (not sure what it is called) that appears above the email body under the list of incoming emails in the inbox. It is the bar the has info about the email and buttons like reply, delete, etc. It is redundant and just takes up space.

    You cannot remove it. It is part of the message pane and will display when the message pane turned on.
    You can make it smaller with this add on.
    https://addons.mozilla.org/en-US/thunderbird/addon/compactheader/?src=hp-dl-featured

  • TS4002 I delete an icloud email from my MacBook Pro but when I open mail again the email is still there. What's up with that?

    I delete an icloud email from my MacBook Pro but when I open mail again the email is still there. What's up with that?

    exxronin wrote:
    At least I understand, but the functionality does not match what the manual says.  When functionality does not match the manual it is a BUG.
    What if I do not want to use IMAP or Exchange?  I do not like being forced to use technology I do not trust.
    No, it is not a bug. It is working as designed. And there is noting in the manual that staes you can create folders for a POP account.
    You do know that any email sent through a POP account stays on the provider's server (often for years) even if you delete it from your inboxes, right? Completely beyond your control. Refusing to use an IMAP service doesn't protect you from anything.

  • After upgrading to IOS 5, the edit button doesn't appear in the CONTACTS

    After upgrading to IOS 5, the edit button doesn't appear in the CONTACTS. Any idea, why?

    If you have a gmail, yahoo, or even icloud etc. account go into settings>mail, contacts and make sure you're not syncing through yahoo for example.. Turn that off, if that still doesn't work delete the yahoo account and simply set up the account again..will add the + & edit functions again..

  • BI Publisher 11g - not able to get TEXT output in the email body

    I am trying to send TEXT report output generated by ETEXT templates in the email body by setting up the Bursting defintion in the Data Model using the following query. It is always sending it as an attachment though PARAMETER6 is set as false. Please advise on how to make it work?
    It seems PARAMETER6 does not have any effect on how it works.
    select
    customer_id KEY,
    'Etext_Template' TEMPLATE
    'ETEXT' TEMPLATE_FORMAT,
    'en-US' LOCALE,
    'TEXT' OUTPUT_FORMAT,
    'EMAIL' DEL_CHANNEL,
    null TIMEZONE,
    null CLAENDAR,
    customer_name || '_status' OUTPUT_NAME,
    'true' SAVE_OUTPUT,
    '[email protected]' PARAMETER1,
    null PARAMETER2,
    '[email protected]' PARAMETER3,
    'Status Report for ' || customer_name PARAMETER4,
    null PARAMETER5,
    'false' PARAMETER6,
    null PARAMETER7,
    null PARAMETER8
    from dpmi_customers_v
    The Oracle BI Publisher version is 11.1.1.5.0.
    Thanks,
    Suja

    Control click or Right Click on the attachment in the body of the email and select 'View as icon'.
    There is a (paid for) mail plugin called Attachment Tamer which helps Mail do a much better of handling attachments - giving much more control over how they are viewed/arranged/received. It's available from http://lokiware.info/Attachment-Tamer
    (Usual caveat, I've no connection with Lokiware, just happy with their product).

  • How to send a payslip of the emp in the email body in R12

    Hi All,
    Would like to know how can we send the payslip of an employee in the email.
    How can one do the above mentioned function in Oracle Payroll in R12.
    Please note that the payslip amounts should be in the email body and not as an attachment.
    thanx,
    Chetan

    Open the workflow process you are using.
    Open the notification.
    In the notification you will see there will be a message given
    Open the message and in that there will different parts of message like Subject, Body as text and HTML.
    See the HTML body you can find the there must be some attributes defined there. Create you own attribute say a URL (which is OA Page, a function in Apps)
    and test.
    e.g in OTL Workflows for Employees (HXCEMP) workflow, there is a message template "Inline Timecard Approval" in which a URL attribute is used.
    I think some workflow experts can help you more.
    HTH

  • Detail rows to be in the email body,can i dinamicaly generate email body?

    There is 2 to 5 detail records for each employee.
    I want to display those 5 records in the email body as html table.
    how can I do this.
    Can i generate an html table using web tool kit with data from a procedure and attach to the notification . Is it possible?
    please help.
    thanks

    You can do that in Mail on your Mac but not at the iCloud.com Mail site.
    OT

  • Showing the Logo in the email body

    Hi,
    I am trying to show the logo in the email body. When i try to acheive this with SendMail i am getting a red cross icon.

    Hi,
    I wanted to test it before answering you. Inlcuding JPG images in mail works.
    I created a simple piece of PeopleCode to include a jpg image from the Oracle Site.
    Local string &MAIL_CC, &MAIL_TO, &MAIL_BCC, &MAIL_SUBJECT, &MAIL_TITLES, &MAIL_TEXT, &MAIL_FILES, &MAIL_FROM, &REPLYTO, &SENDER;
    Local number &MAIL_FLAGS;
    &MAIL_FLAGS = 0;
    &MAIL_TO = "[email protected]";
    &MAIL_CC = "";
    &MAIL_BCC = "";
    &MAIL_SUBJECT = "Testing SendMail with jpg image";
    &CONTTYPE = "Content-type: text/html; charset=UTF-8";
    &MAIL_TEXT = "Iron Man from Oracle Site: " | "<img src= 'http://www.oracle.com/us/hp01-thumb-ironman-1929584.jpg'>";
    &MAIL_FILES = "";
    &MAIL_TITLES = "";
    &MAIL_FROM = "";
    &MAIL_SEP = ";";
    &REPLYTO = "";
    &SENDER = "";
    &RET = SendMail(&MAIL_FLAGS, &MAIL_TO, &MAIL_CC, &MAIL_BCC, &MAIL_SUBJECT, &MAIL_TEXT, &MAIL_FILES, &MAIL_TITLES, &MAIL_FROM, &MAIL_SEP, &CONTTYPE, &REPLYTO, &SENDER);
    If &RET <> 0 Then
       MessageBox(0, "", 0, 0, "Return code from SendMail=" | &RET);
    End-If;output:
    http://www5.picturepush.com/photo/a/12711833/640/12711833.png

  • What can I do if the sharing button doesn`t appear in my itunes?

    I have already autorizated my PC, but the sharing button doesn`t appear in my itunes menu! What can I do to find it and share my musics with my other PCs? Please help me!

    I assume PR is the country code for Peurto Rico.   Apple do not appear to have any retail store connections there though there are one or two re-sellers.  
    You need to be living in the USA with a credit or bank card from an American bank to use the US Mac App Store..

Maybe you are looking for

  • How to move huge HD video files between external hard drives and defrag ext drive?

    I have huge high definition video files on a 2TB external hard drive (and its clone).  The external hard drive is maxed out.  I would like to move many of the video files to a new 3TB external hard drive (G-drive, and a clone) and leave a sub-group o

  • Display Selection variables on Query output

    Hi, I have web template used for reports. When user enters say 0calyear as 2005 on selections screen and runs the report, the data result is shown, but the selections entered(2005) is not shown on the navigation block..How to display those values ent

  • PCLK2 not in HiZ on PC power up

    I am using the PCI-DIO-32HS, and in the 653x user manual it states that this card should power up with all lines in high impedance (HiZ). However, this is not 100% true as PCLK2 outputs 5V when my PC boots up (all other lines seem to be fine). Is thi

  • RDS & network printers best practices

    We are in the process of designing a multi site remote desktop solution for a customer, they have around 80 users with 5-10 users per site. I've been searching for some recommendations about the best way to deploy their network printers. The RDS farm

  • RSRT: Error in Exporting File to Local Folder

    Hi Experts We executed a Query in RSRT t-code and when we try to download data to local folder, the file is getting downloaded with error message. Please help out to resolve the issue "PAGENO=1&CMD=EXPORT&DATA_PROVIDER=DP&DUMMY=file.csv&FORMAT=CSV&RE