Mailbox Behaviours doesn't exist

Hello everyone and _thanks for your help_.
My iPhone does not show Mailbox Behaviors. ?what's up with that?
settings> mail> email account> advanced> should show Mailbox Behaviors, but it only shows Deleted Messages, Incoming settings. Mailbox Behaviors does not exist.
Help would be appreciated.
elgin

My girlfriend and I each have iPhones. Mine shows Mailbox Behaviors with Drafts, Sent and Deleted options. Her's does not. Both our accounts are POP accounts. I don't think it's a matter of wanting or needing. It's more a consistency issue. Without these options we can't choose between iPhone or server.
I rebooted the system this morning and that didn't help.
Thanks, e

Similar Messages

Encounter error with command "New-MailboxFolder" (The specified mailbox doesn't exist)

[Symptom]
======================
Generally, a user can use “New-MailboxFolder” command to create mailbox folder for his own mailbox successfully. See the following example:
The above command creates a new folder named “PersonalFAQ” in the mailbox of Administrator.
However, this command cannot be used to create folders on other user’s mailbox although the full access permission is assigned. See the follow example. (We already granted the full access permission of
test1 user to administrator user)
Just as what the picture shows, an error message will appear:
“The specified mailbox “username” doesn’t exist.”
[Cause Analysis]
=======================================
It’s by default. The “New-MailboxFolder” command cannot be used to create folders for other mailboxes.
[Workarounds]
==============================
1. Use EWS channel to create the folders for other mailboxes.
http://msdn.microsoft.com/en-us/library/office/dn535504(v=exchg.150).aspx#bk_createfolderewsma
2. Use MFCMAPI:
3. PFDAVADMIN (Exchange 2003/2007) or Exfolders (Exchange 2010)
More information:
Creating Folders (Exchange Web Services)
http://msdn.microsoft.com/en-us/library/office/aa563302(v=exchg.140).aspx
New-MailboxFolder
http://technet.microsoft.com/en-us/library/dd335113(v=exchg.150).aspx
Microsoft Exchange Server MAPI Editor
http://www.microsoft.com/en-gb/download/details.aspx?id=2953
Exchange 2010 SP1 (and later) ExFolders
http://gallery.technet.microsoft.com/office/Exchange-2010-SP1-ExFolders-e6bfd405
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Since this issue is related to only one user, this means that the USERPARAMS information for this user is corrupted.
The issue could be resolved by deleting all entries related to this user on this table on the HFM DB.
Kindly open the HFM DB and look for the <application name>_userparams table.
and,
Delete the enteries corresponding to the user.Backup this table prior truncating the table.Please get this operation done by an administrator.
Edited by: user10931567 on 16-Jul-2009 10:03 AM

New-MoveRequest -Remote legacy return error Database '04ba5257-54b1-4ee8-9b50-203c3f9107fe' doesn't exist.

I'm try to migrate from Exchange 2007 (on 2003 R2 x64) to Exchange 2010 (on 2008 R2) (all with last service pack) in different domain with a forest and domain trust.
I know it is Exchange 2013 forum but I don't see Exchange 2010 related forum.
1. I have made a Prepare-MoveRequest and all work fine
2. I have migrated other attribute with ADMT 3.2 and all work fine (the user can access the new domain and browse all file server of the old domain)
3. I' m logged on Exchange 2010 management shell and the command:
New-MoveRequest -Identity "[email protected]" -RemoteLegacy -RemoteCredential $Exchaneg2007Cred -RemoteGlobalCatalog dc01.exchange2007domain.com -TargetDatabase "EXHC2010DB01"
-TargetDeliverydomain "exchange2010domain.local" -Verbose -Debug
The system return the error:
Database '04ba5257-54b1-4ee8-9b50-203c3f9107fe' doesn't exist.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemotePermanentException
+ FullyQualifiedErrorId : 8C654C28,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
the database id '04ba5257-54b1-4ee8-9b50-203c3f9107fe' exists and is the Source Mailbox database on Exchange 2007
Any Idea or suggestion
LSo
LSo Lorenzo Soncini Trento TN - Italy

Hi LSo,
From your description, when you run the New-MoveRequest cmdlet on Exchange 2010 server, it occurs an error that Source Mailbox Database doesn't exist. In your case, I recommend you use the following cmdlet to verify if you can retrieve the source mailbox
database on Exchange 2010 server.
Get-MailboxDatabase -Identity "04ba5257-54b1-4ee8-9b50-203c3f9107fe"
Please take your time to post the result for my further research.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Problems with outlook 2010 IMAP it says : Mailbox doesn't exist

I have a problem with my outlook at work.
I am currently using Outlook 2010 as IMAP (excuse me for my bad English)
There is 1 Category "Harderwijk" where I can't take any mail in or out.
Whenever i try to put a new mail in the map I get this error: Cannot move items Response from server was: Mailbox doesn't exist. Whenever I try to put a mail out of the Harderwijk map I get this error: Cannot move item, Cannot select map this could be a cause
of the IMAP-Server or the map is possibly deleted or changed.
Can someone help me with this?
I tried to google the answer, but the only responses I saw is that people are going to other mail servers or had to make a new mail. Since this is a bussiness mail we can't afford to lose our e-mails.
So I need a solution without losing all the mails. Thanks in advance.

hi, you can check these two links:
http://www.emaildiscussions.com/showthread.php?p=492312
http://forums.mozillazine.org/viewtopic.php?f=28&t=65807
Regards,
Flynn

Why is Mail asking me for the name of an smtp server for an email address that doesn't exist?

I've migrated from Snow Leopard to Mountain Lion on a new Mac, but in trying to use Mail on ML, it keeps asking me for the name of an smtp server for an email address that's never existed. The addy has my user name correct, but the server part of the address doesn't exist, or at least I've never used an email address with that provider. On ML there's no plist file for Mail, so nothing to delete there. What else can I do to get Mail working? The only other option I have is to abandon Mail as being crippled and useless, and use Postbox, which for it's price (US$9.95) is an attractive option. OTOH, I've paid for Mail after all, so it really ought to work. Any clues as to what I can do to stop its nonsensical behaviour? How do I file a bug report?
TIA.
Pauline

Amasis wrote:
On ML there's no plist file for Mail, so nothing to delete there.
~/Library/Containers/com.apple.mail/Container.plist
(Go to your Finder "Go" menu hold the option key to choose "Library", since the ~/Library is hidden on ML)

Database Deleted that had all the Arbitration Mailboxes, AD accounts still exist.

So in doing a little house cleaning on Exchange 2010 in a new environment I'm noticing that the Arbitration Mailboxes do not exist but the accounts exist in AD.
I ran the below command and got that output.
Get-Mailbox -Arbitration | Ft Name, Database
Name
Database
SystemMailbox{1f05a927-7ba6-4008-81eb-7c42e5be81f5}         Old-Database
SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9}         Old-Database
FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042         Old-Database
"Old-Database" does not exist in my DAG nor do any of the associated files are listed in any of the Exchange Volumes. In AD Users I see all three AD accounts. I've tried to move requests, knowing of course that a mailbox doesn't exist
so might not work but just giving it a try, and of course it failed. I've tried to enable the mailbox for the account, which I think would be the closest solution but I think it is trying to recreate the account in the old database that doesn't exist.
So I guess what I'm trying to do is enable all the mailboxes but have it recreated in a different database.
Unless my thought process is entirely wrong I'm was hoping for assistance with next steps or the powershell command to accomplish what I'm doing. I did read this in another post though and to run this command. I'm hesitant as the poster seemed
hesitant initially.
Set-Mailbox -Arbitration -Database <DatabaseID>
https://social.technet.microsoft.com/forums/exchange/en-US/c1aec19d-f101-4c5a-b086-c7cc3e86b2f9/deleted-database-that-was-housing-arbitration-mailboxes

Hi There,
I used the link below to re created them after we lost a DB that contained them.
http://social.technet.microsoft.com/wiki/contents/articles/5317.recreate-and-enable-missing-arbitration-user-accounts-and-mailboxes-in-exchange-server-2010.aspx
Exchange Blog:
www.ntweekly.com
MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010,MCTS:Virtualization

Hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder go it says this file doesn't exist. can some1 plz help?

hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder> go it says this file doesn't exist. can some1 plz help? how can i put all my application through application folder?

Something really odd is going on. In your first screen shot, I noticed that the Applications folder does not have the proper icon displayed in the side bar. Also, in the title bar it lists it as Applications 08-59-29-909.
Not sure where it's picking up that odd name, unless it's because it's still truly within the Trash folder.
Try this. In the Finder > Preferences > General > turn on "Always open folders in a new window". (I have a feeling you have the default setting with this off).
Now, in Finder > Go > move down and open the Applications Folder from there. Now open the folder where you see all your applications that you show in your screen shot, select all, and move them to this true appliactions folder.
This is what you should properly seeing (but with different apps listed):
See how the Applications folder has the icon of the letter A shaped with a pencil, ruler & pen.

Adding T-code to Role Area Menu which doesn't exist in box

Hello,
We are using a SAP system called QIM which has "jumplink" functionality, which is a web based linked (NWBC) which will launch you into a ERP system transaction when clicked. For example, in QIM we will display a outbound delivery, and if we click on the link it launches VL03N from the ERP system and displays as web UI.
In PFCG under area menu, this transaction code appears under the menu, but VL03N doesn't actually existing in the system... The issue is we created a custom object for inbound delivery and we need ot add it under this area, but when we attempt to add a transaction code under the Role Area, the system says the t-code doesn't exist... Even when we try this with an existing t-code showing in the menu (Vl03N) it says it doesnt exist. Same if we look at the authorization object S_TCODE. These t-codes exist in here, but when you try to readd them they system says it doesn't exist.
Please find the attachments with some screen shots... Any idea how we can do this?

You can create a role menu as remote enabled remote menu.
The authority checks will happen on the remote side, also against objects which don't exist in the calling system as the music is on the other side.
On the RFC client system side, you only need the parameter transaction to start the remote transaction in the remote system.
See the documentation on SYST function module ABAP4_CALL_TRANSACTION.
This is however a rather antiquated technology... it is more popular to use a SAP Portal or webdynpro applications for this sort of thing (the user does not notice the difference) or later versions of such integration such as Fiori UIs or imbedded links within the Business Client.
I don't want to lean out the window too far, but the buggy phase of these new things is approaching an end and they are usable if you are on newer releases. Then you can pool the menu and use APIs for navigation and no more irritating S_TCODE checks.
Cheers,
Julius

How to deauthorize a computer , that doesn't exist anymore?

I unisnstalled windows , and for some reason when i inserted my ipod to the freshly installed windows+itunes , and logged on my account , iTunes said , that its a new computer and asked me to authorize it , and so i did.
My question is: how can i deauthorize my old version of windows , that doesn't exist anymore?
I also have another question in this topic : When i want to buy items from itunes from a new device , it asks for my bank card number , and takes 1-2 dollars from it. Is this ok?

Take a look at this Apple support article; it may help:
One computer using multiple iTunes Store authorizations
When i want to buy items from itunes from a new device , it asks for my bank card number , and takes 1-2 dollars from it. Is this ok?
I'm not sure what you mean by this. What "items"? If you are referring to music, videos or movies, you get only one download per purchase, so if you buy the items again, whether from another device or the same one, yes, you will be charged again. Only apps allow redownloading without additional charge.
Regards.

Error trying to relate tables "...either doesn't exist or doesn't have a relationship to any table available in the current context"

I have two tables;
The first is my Order table which has a single row for each unique order - there are no duplicate order numbers.The order id column here is called
OrderID.
The second is my Submissions table which is similar to a transactions table, there are multiple submissions for every order. This table also contains an
OrderID column that contains the relevant OrderID.
The submission table also contains a calculated field called Date and a calculated field called
MaxDate field which is the date of the most recent submission that relates to any particular order in cases where there are multipple.
My goal is to add a column to the Order table this MaxDate column. The reason for duplicating the information rather than linking the tables is because I need to create more calculated columns in the
Orders table based on this value.
I have created a relationship between the two tables however when I use:
=RELATED(Submissions[MaxDate]
I get this error:
"...either doesn't exist or doesn't have a relationship to any table available in the current context"
I don't really understand why this would be, because MaxDate definitely exists and contains only numerical values. What is more strange is that if I try and combine the data through a pivot table it actually works! I can create a pivot with OrderID in the first
column and then associate it with MaxDate from the Submissions
table as the value.
Can anyone help me understand what is the problem here?
P.S. if it is useful the formula I'm using to calculate the MaxDate is:
=MAXX(FILTER(Submissions,Submissions[OrderID] = EARLIER(Submissions[OrderID])),[Date])
Thanks.

Maracles, is this still an issue?
Thanks!
Ed Price, SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Oracle not Available, Shared Memory realm doesn't exist

Hi,
I have problem during XE installation on Windows 2003 R2 SP 2 Enterprise edition. I have uninstall the oracle xe and the result still the same. Finally I uninstall the windows and start all over again, surprisingly the result still the same. FYI, we normally has no issue during installation because this is part of our system we sell to our customer which require oracle xe. This is the first time we have seen this issue.
ORA-01034 : Oracle Not available
ORA-27101 : Shared memory realm doesn't exist.
Oracle XE and listener services is started in the windows services.
if we try to do startup the following message occured.
SQL> connect /as sysdba
Connected to an idle instance.
SQL> startup
ORA-44412: XE edition memory parameter invalid or not specified
SQL>
I can send you the oracle_xe log, init ora, and OpsBuildAll.log to create the database.
When we compare with the working installation, we saw that the size of oraclexe folder is less, it's just 233MB while the working one is over 1GB. After investigation, found out that the .dbf files is not avaiable in the oradata folder, i have tried to copy those files from the working one but the problem stay the same, probably there are a lot of files more missing.
Appreciate your help on this.
Thanks,
Agus

Hi,
Please find the log below
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora";
ORA-44412: XE edition memory parameter invalid or not specified
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\rmanRestoreDatafiles.sql;
SQL> set echo off;
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
declare
ERROR at line 1:
ORA-01034: ORACLE not available
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Connected to an idle instance.
SQL> spool C:\oraclexe\app\oracle\product\10.2.0\server\config\log\cloneDBCreation.log
I have css log as well if you are interesting to see.
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Tue Mar 20 14:13:29 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5308M/6133M, Ph+PgF:7152M/8000M, VA:1933M/2047M
Tue Mar 20 14:13:29 2012
Starting ORACLE instance (normal)
Tue Mar 20 14:13:30 2012
Starting ORACLE instance (normal)
Tue Mar 20 14:13:31 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Tue Mar 20 19:43:31 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5351M/6133M, Ph+PgF:7150M/8000M, VA:1932M/2047M
Tue Mar 20 19:43:31 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Tue Mar 20 19:55:39 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5254M/6133M, Ph+PgF:7052M/8000M, VA:1932M/2047M
Tue Mar 20 19:55:39 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 05:23:41 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5259M/6133M, Ph+PgF:6894M/8000M, VA:1932M/2047M
Wed Mar 21 05:23:41 2012
Starting ORACLE instance (normal)
Wed Mar 21 05:29:12 2012
Starting ORACLE instance (normal)
Wed Mar 21 05:31:42 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 05:50:45 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5143M/6133M, Ph+PgF:6768M/8000M, VA:1932M/2047M
Wed Mar 21 05:50:45 2012
Starting ORACLE instance (normal)
Wed Mar 21 06:02:38 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:04:03 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5205M/6133M, Ph+PgF:6866M/8000M, VA:1944M/2047M
Wed Mar 21 06:04:03 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:06:00 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5195M/6133M, Ph+PgF:6837M/8000M, VA:1944M/2047M
Wed Mar 21 06:06:00 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:06:11 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5195M/6133M, Ph+PgF:6836M/8000M, VA:1944M/2047M
Wed Mar 21 06:06:11 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:06:40 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5191M/6133M, Ph+PgF:6832M/8000M, VA:1944M/2047M
Wed Mar 21 06:06:40 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:07:18 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5191M/6133M, Ph+PgF:6831M/8000M, VA:1932M/2047M
Wed Mar 21 06:07:18 2012
Starting ORACLE instance (normal)
Wed Mar 21 06:07:38 2012
Shutting down instance (abort)
Wed Mar 21 06:07:51 2012
Starting ORACLE instance (normal)
Wed Mar 21 06:13:31 2012
Starting ORACLE instance (normal)
I have finished installing the XE on windows but result is the same, dbf file is not created on oradata folder.
Thanks,
Agus

HT4864 When trying to update my Mail Account Mailbox Behaviours settings, when I try to close the settings pane the following messages occur: Invalid Incoming Mail Server The "Incoming Mail Server" field cannot be empty. The incoming mail server box has p

When trying to update my Mail Account Mailbox Behaviours settings, after making the changes when I try to close the settings pane the following messages occur: Invalid Incoming Mail Server The “Incoming Mail Server” field cannot be empty. The incoming mail server box has in light grey colour: p02-imap.mail.me.com in it and I cannot edit its content. Any ideas what is going on and how to fix it?

Hi all,
Mattreichenbach is probably on the right track here with a reset of settings. I think I've determined the issue has to do with cached account information and inconsistencies for the account name. This seems to crop up when I've changed my password and it hasn't propagated fully to all the servers, devices, certificates, etc.
Hopefully many here are on their way to restoration of service by now but it's clear that a lot of people are having the same issues. Very frustrating and definitely something Apple needs to resolve: incoming mail server field grayed out, incorrect autopopulation of different fields, other unanticipated behaviors. If you're still having issues, though, here's what worked for me...
First, head to the iCloud preferences pane in System Configuration and choose "Sign Out". When I did this it prompted me with a number of "are you sure" type questions about retaining information on my local machine. I chose to delete/remove the info each time simply because it should all be restored by the cloud and I didn't want to risk a massive duplication of my data... I will say, I'm back up and running with no issues so I suspect you can make the same delete/remove choices... But use your own judgment. I don't want you to lose any data (ie.. please use care as you do this because I cannot bear the thought of causing anyone to experience the pain of data loss).
Once you've signed out of iCloud, restart your system. When you get back in, head to the Mail, Contacts and Calendars section of your System Preferences and add your account back by choosing the brushed aluminum "iCloud" button. When it asks for your account name, use your @iCloud.com email address. I am all but certain my issue had started because one of my devices (iPhone or whatever) had been set up with an email alias specified instead of my @iCloud.com address.
Apple, if you're reading through any of these issues (there are TONS of users having this same problem). Take note, that your icloud service somewhat frequently is not responding and yet tells the user that the password is wrong and this prompts people to be changing their passwords unnecessarily. This has happened to me on numerous occasions. Also, I noticed that last week's outage corresponded to a VERY similar outage exactly one year ago to the day. Sounds like planned maintenance to me and I think you could do a better job notifying folks so we're not wasting HUGE amounts of time troubleshooting a problem that we have no hope of fixing.
Hope that helps some of you!
Terry Mullane
Washington, DC

When I try to turn on my homesharing on apple TV it says that either my apple id doesn't exist or the password is wrong. However, I've been using the id for almost half a year and I even changed my password and it still wouldn't work. How do I fix this?

When I try to turn on my homesharing on apple TV it says that either my apple id doesn't exist or the password is wrong. However, I've been using the id for almost half a year and I even changed my password and it still wouldn't work. What can I do to fix this?

Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

I am having a hard time with a page that is working for everyone else. When I click on anything in the site I get a message that says "The page you were looking for doesn't exist." This is happening on both my ipad 2 and my iphone 5. I cleared my cache

When I click on anything in the site I get the message " The page you were looking for doesn't exist." This website works for everyone else, but not on my iPad 2 or iPhone 5. I cleared my cache and history on the iPad, but it still isn't working.

I live in Germany and my credit card is in my native country of Holland .. then it
doesn't accept my credit card.
Your first statement explains the second statement. To use the German iTunes Store, you need to prove that you're a resident of Germany (that is required by the content owners who will not allow cross-border sales) and the only way Apple can provide such a verification is by requiring that you enter in either a German credit card or a German-purchased iTunes prepaid card. Since I presume the former is not a possibility, you'll need to do the latter if you wish to purchase content from the iTunes Store. Again, this is not Apple's choice but is forced on them by the content owners as a requirement for Apple being allowed to sell the content. The EU is working on regulations that would force the content owners to allow access pan-EU, but that's still in the works.
You do not need an iTunes Store account to activate and run your iPad, though; at least, I didn't need one for either of my two iPads. If you only want to set up an account so you can get free iPad apps, take a look here:
http://support.apple.com/kb/HT2534
Read the steps carefully as the order in which you follow them is apparently critical. This seems to come and go, or only apply to App Stores in specific countries, so you may not see the option for "None" when asked for a payment type.
As to the German iTunes Store in English, you can comment to Apple on that via their feedback pages:
http://www.apple.com/feedback
Regards.
P.S. Regarding "this is the only place for a complaint and that will no doubt get removed because
I'm not full of happy joy sparkles.
As stated in the terms of use to which we all agreed, this isn't a complaint forum, it's a technical support forum. You don't have to be full of "happy joy sparkles", but posts that are nothing but complaints may indeed be removed. If you want to complain to Apple, use the feedback pages.
Message was edited by: Dave Sawyer

Sale order doesn;t exist issue in APO

Hi ,
I am facing issue while trying ot create outbound delivery from sale order. But during delivery creation , BAPI_OUTB_DELIVERY_CREATE_SLS , bapi throws error as " SALE order xxxxxxxxx doesn't exist in APO , Only 0 EA of material is available..." . But when manually do, delivey is created . Hence we analysed it is due to the time taken by APO system to update the Sale order.
Let me know how to get the sale order or orderid in terms of APO to verify the SO is updated in APO system .
Kindly suggest

Dear Experts,
this message assumed answered, I'm facing with a similar problem, during the replication of business partners the address isn't created in SAP ECC, and a bdow with the error appears.
Thanks in advance
Cris

Mailbox Behaviours doesn't exist

Similar Messages

Maybe you are looking for