Maintain Partner Bank Type for customer
Hi,
I have a problem when running the payment proposal via F110.
I want to procede to a customer/vendor clearing, the problem is that the partner bank type is filled for the vendor but not for the customer.
If i want to maintain "partner bank type" for the customer, where should I maintain it?
Could you please advise me?
Thanks in advance,
Soumaya
Hi,
If your client does not want to use this field because the bank details are set for deletion then, refer to OSS Note no.:1016924. Otherwise, please try Substitution in OB28 with the User Exit ZGGBR000 (Copy of RGGBR000).
Regards,
Kiron Kumar T.
Similar Messages
-
Is there any user exit/ badi to populate the partner bank type for F-63.
Is there any user exit/ badi to populate the partner bank type (field name BSEG-BVTYP) in transaction F-63. There is exit ZFI_FOAP_CDITEMS_00001011 having BKPF and BSEG as only import parameters so I cant change the value for BSEG-BVTYP.
So could you please let me know any exit where I can change the value for BSEG-BVTYP for transaction F-63?
Thanks in Advance,
Steevanhi,
Below r the user exit related to transaction F-63.
Check out if any of them will solve ur Query..
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
Reward points if helpful,
Regards,
Brijesh -
How the Partner Bank type field in Customer master is used ??
Hi,
When 2 bank accounts are maintained in the customer master. In the Bank type field ( Partner Bank type), I give X and Y for these 2 bank accounts.
When an invoice is raised for this customer thru Sales order, I am not able to give this partner bank type i.e X or Y in the Invoice, since the invoice is automatically created.
If I raise thru FB70, I am able to give this X or Y.
How can I use this Partner Bank type field when I raise sales invoice thru Sales order.
Can anyone help me on this as early as possible.
Regards,
G.Ameet karthikeyan.Hi Experts,
We have executed an automatic payment run in F110. Status of payment proposal and payment run are successful. Postings orders: 1 generated and 1 completed.
However, the payment method used in the payment run is incorrect. Instead of 'D', the user mistakenly inputted C. Kindly advise what is the purpose of Payment method in F110 and what will happen if the payment method used is incorrect and different from the one maintained in the vendor master. -
Validation for partner bank type
Hi Experts,
My client wants a functionality that partner bank type and document Currency should be the same, if it is not same user should not allow to post. Can any one tell me is there any validation. How to wirte validation give step by step procedure.
thanks
BaluS
-
Field Partner Bank Type in Credit notes in AR
Dear all,
We sometimes need to pay by bank transfer credit notes to some of our customers.
I know that it is possible to maintain the field Partner Bank Type in the customer master data for different bank accounts and then select in the AR item which bank account we want to use in the payment run.
However, this field (BSEG-BVTYP) does not seem to be available when the line item in AR corresponds to a credit. Is there any configuration setting that can be amended in order to achieve this?
Many thanks.per SAP standard, the posting key's have some fields suppressed. Please check the credit posting key you are using (for e.g. 11) ,T.code OB41. Look into the payment transaction section & make the bank partner field Opt.Entry.
Hope this helps you. -
Partner Bank Type not Updating
When running transaction F-110, the programme will not pick up DM documents on customer accounts due to the fact the Partner Bank Type field is not populated.
As such I have to do this manually for each vendor every month. If this was populated invoices would be automatically netted against debit memo's
to explain what's happening in our company here is the process...
When we order a material from vendor - we normally raise a credit memo, after that when the quality department finds any fault with the product what they do is they do some repair work and they create a surcharge against it. This surcharge will create a creditmemo.
Quality Management is implemented in our systems.
A notification is created in Qm01
Surcharge is added in Qm02
And this produces a debit memo request (a sales order) in Va03
Every night Batch input session runs in VF04 and billing document is produced.
From billing document u2013accounting document is produced.
Here when we run F110- it should normally net off credit balance with the new debit balances, but F110 cannot select these documents as partner bank type is not updating.
(Both master records checked. And its happening for all the vendors)
1) whether there is an opportunity to create (or) populate the field Partner bank type in creation of billing document.
2) Any BTE's will help me like (00001120).
Please help me,
cheersHi Dove,
I think you can use a substitution for field Bank Type at Item Level (TCODE OBBH). This would fill your bank type when you post the document in FI, then you won't have problems in F110.
Hope that helps.Cheers.
Ignacio. -
Partner Bank Type in Vendor Master
Good afternoon
I have the situation where a Vendor has more than one bank account - eg. one bank account for Euro and one bank account for Sterling
In the vendor master I have created the 2 lines on the bank details screen and created Partner bank types EUR1 & GBP1 under the BnkT field. First question is can these be pre-defined anywhere in Customizing?
I have assigned eg. the GBP1 Partner Bank type in the header "Payments" tab when in transaction MIRO however I am getting an error message that says "Customer has no bank details of the bank type GBP1"
Please help. Thank youHello
I have checked transactio FI01.
The bank key and country for my 2 bank accounts are the same and are already set up. I do not see anything that would link to the BnkT field. Any other ideas?
It's the BVTYP field (Partner Bank type header) in the MIRO transaction that does not seem to link to the BnkT field in the vendor master bank details. Do you know why this is? -
Partner bank type field missing in payment proposal list
Hi Gurus,
The partner bank type field is not being displayed in payment proposal list whereas I can display the same in vendor line item display. Though there is a field named BnkT in the proposal list the partner bank type is not displayed. Kindly advice me in this regard.
Regards.Hello,
Please note the system selects the bank with the lowest BVTYP.
This means that a bank which has no BVTYP will be selected first,
then one with AAAA, then BBBB. This is the reason why the partner
bank which you expected was not chosen.
Please read the F1 help for this field which explains the main purpos
of this field:
F1 Help:
In the business partner's master record:
If several bank accounts exist in a customer or vendor master
record, you can assign different keys for these accounts.
In the item:
To use a particular bank of the business partner for the payment
an item, enter the appropriate key in the item. The payment prog
then pays the item via the business partner's predefined bank.
Here you can enter, for example a number, 0001.
Then, when you post a document with the transaction FB01 or F-42, you
can display the field 'Partner bank type' (BSEG-BVTYP). Here you can
write the number 0001 or another number for another bank of the same
vendor. Afterwards, you can post this document.
Also, you can use Business Transaction Event (Open-FI) 00001810 to
implement your own algorithm to select a bank. For details, see the
documentation of the sample function module SAMPLE_PROCESS_00001810.
Also review below notes in the same context about "F110: partner bank
type".
363219 - F110: Wrong partner bank after proposal run maintnc
390740 - F110: partner bank type not in clearing line of payment doc
Hope this clarifies the system behaviour.
regards
Ray -
Partner Bank Type Selection in Payment Proposal
Dear Experts,
Would like to seek your advice regarding the above subject matter.
We have a vendor with multiple bank accounts maintained in the vendor master and these are multiple currencies. For example:
Vendor ABC
Country Bank key Partner Bank Currency
SG UK1001 GBP1 GBP
SG SG1001 SGD1 SGD
SG US1001 USD1 USD
SG US1002 USD2 USD
I have two questions:
1. If I am making a payment in US dollar to this vendor's bank account and in the invoice (open item) I did not maintain a partner bank type, will the payment proposal program be able to select the US dollar bank account (USD1)? Please could you advise the configurations required.
2. Is there a way for automatic determination on the selection of partner bank type if the payment is in USD since there are two accounts for USD?
Thanks for your reply.
TLHi,
see in BusinessTransactions Events (BTE) / Process Interfaces:
00001810 PAYMENT PROGRAM: Individual bank determination
The sample function module is SAMPLE_PROCESS_00001810
here is a part of the documentation:
INTERFACE
The purpose of this interface is to provide a way of individually
determining which of its own bank details and which partner bank details
should be used for a payment. The authorized bank details are then
transferred in table form. If you do not wish to use some of the banks
determined, you can set the indicator XCUSF on the relevant line.
In addition, a correspondence bank can be determined for the processing
of foreign payments. -
Hi All,
We all know that for maintaing 'PARTNER BANK TYPE' in 'Vendor Master Record' the 'Country, Bank Key & Account Number' is 'Primary Key' so we cannot make 1 to Many relation for example-
Country BankKey Account Number Partner Bank Type
IN 12345 12345 IN01
IN 12345 12345 IN02
IN 12345 12345 IN03
Here system will give error.
To overcome this i developed a 'Validation' in which i have created 'A Warning Message' & same time i developed a 'Z' table in which i maintained 1 to Many relation then i manipulated the 'Program' generated by 'Validation' & made complete automation of 'Partner Bank Type' so every time when 'Invoice' get posted system picks the 'Partne Bank Type' with reference to 'Logic'.
But i am not able to 'Understand' how system will 'Pick' 'BANK' at the time of F110 with reference to 'Z' table.
Please suggest what should i do is there any 'USER EXIT' is there where i can isert this 'Z' table.
Lokking forward for response.
Regards
Sandeep
Edited by: sandeep on Dec 21, 2010 7:14 AMHi,
I think you should use BTE 00001810. Please search in the forum with the 3 keywords bank type bte. -
Partner bank type missing in custmer invoice.
Dear Experts:
I want to netting vendor and customer invoice usting F110. (The vendor is also the customer)
Partner bank type should be the same so that these data can be groupped together when netting.
But the Vendor invoices have the partner bank type while the customer invoices which are generated from SD module don't have the partner bank type. Is it possible to configure the Partner bank type in SD module?
Thanks!
Edited by: Qilan Wang on Jul 13, 2010 9:59 AMHi,
It is not directly possible to get it from the SD. But you can use the BTE concept to have this option. BTE : Business Transaction Event - search in the forum for details.
VVR -
Select Partner Bank Type from F110
Dear Experts,
I have 1 vendor which has 2 bank accounts
Bank Type = 21 ; Bank key = MBB ; Bank Account = 12345678
Bank Type = 22 ; Bank key = BBC ; Bank Account = 98765433
I want to have options to select Bank type while perform automatic payment. Is it possible?
I have done testing which while create the vendor invoice, I selecte the bank type 22. But when I run the automatic payment, the system select bank type 21.
Appreciate your feedback.
Thanks in advance.
Regards,
SriDear All,
I managed to solved the problem by go to t-code OBVCU - under "required master record specification" tick the bank details.
When I do the Automatic payment, system will prompt me to select bank key.
But now I have 1 vendor having 2 bank accounts and both are from same bank (CIMB)
When I tried to maintain the bank account, I received error " Key for identifying the partner bank exists several times"
Question: Is there's any way to configure 1 vendor master data with multiple bank account (different bank account number, same partner bank type - BnkT)
Thanks in advance for your kind help. -
My client has properly entered bank information for a customer using FD02 for 2 banks including the field Bank type. So while entering an invoice - say by FB70, it should display that information under Part. Bank type. But instead they get a message - No partner bank types exist when doing a drop down on that field.
Any ideas?
Thanks for your help.i have getting the same problem , can you just share the information , how u solve it
-
The Partner Bank Type of the vendor in the Purchase Order
Hi All,
A vendor has got more BanK Accounts. These, in his master data, are marked with different Partner bank type.
Creating a Purchase Order, I'd like to know if is possible to specify a specific Partner bank type, obtaining it later in the invoice (vendor item) created by MIro.
Thanks
G.You should create multiple vendors for each bank account and assign that as an invoicing party (PI) partner on the mail vendor this will allow you to choose vendor code for specific bank account.
-
Choose Valid partner bank type - F110 issue
Hello,
We are facing the following issue while running payment program in F110.
Choose valid partner bank type ZFBAREP 005
Error in creating the payment document; read job log FZ 305
The message ZFBAREP 005 is the customized substitution message to update partner bank type field while posting invoices.
How this message triggering when exectuing F110.
where we need to check the triggering point of this message.
regards,
BramhendraChintan,
my question is where is the call function of the sustitution in the program F110.
regards,
Bramhendra
Maybe you are looking for
-
It won't let me update some of my apps?
i recently updated my 2012 macbook pro to the new update. well now it wont let me open my iphoto, it says i must update to open. so i went to update and typed in my apple account email and password and my itunes app garageband app and some other apps
-
I HATE the new iTunes Softare for Windows! They made it exactly like Windows Media Player! If I wanted to use WMP, I wouldn't use iTunes!!!! But I preferred iTunes over anything else. It was much more user friendly. Now its like the rest of them!!! I
-
New bw system on hana db - post live activities
Hello Team we are going to have a new/fresh bw system on hana db. i want to know the activities which i need to perform once the system is ready before starting/implementing anything in that system. request you to please check and help me accordingl
-
Hi frnds, I am directly Inerting data in Ztable. But i am not able to please do need ful help. CONSTANTS: mandt TYPE zdealer-mandt VALUE '400', zbp_sales_org TYPE zdealer-zbp_sales_org VALUE '50000135', zbp_distr_cha
-
Attachment using function module SO_DOCUMENT_SEND_API1
I am using the function module "SO_DOCUMENT_SEND_API1" to send a mail with a pdf attachment. My e-mail contains some text also. The problem is along with the PDF I am also getting a TXT file as an attachment, which contains the same text data as the