Management Group Connection (SDK): Close Connection

Hello,
We are using the SCOM SDK to connect to our management server (described in this article:
https://msdn.microsoft.com/en-us/library/hh328992.aspx).
I see in the opsmgr eventlog on the management Server that the client is connected / disconnected (Event ids 26328 & 26329)
The connection stays open till the server which i use to connect to the sdk service reboots (~15min).
On MSDN i see no disconnect() method.
Is there a way to force closing a connection?
Thomas

Have a look at Tao Yangs blog. He goes through powershell version of connecting to the SCOM SDK to automate tasks: http://blog.tyang.org/
I had a quick look and didn't see any disconnect code but there are a number of examples to go through.
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

SCOM 2012 Global Architecture, One management group or multiple?

Hi Folks,
I work for a global firm, we have multiple data caters in different regions. America, UK, Australia, China etc etc. We are looking to roll out SCOM 2012 for monitoring all systems. Our environment
1,000 Windows servers
All servers on the same Active Directory domain
10 Mbps links between data centers.
My question is around whether to use multiple management groups or one? I’ve seen recommendations for both. For example
In the Infrastructure Planning and Design guide for SCOM 2012 it is stated:
“A centralized management model with large remote locations works best with a management group in each region and a local management group (which provides a consolidated view of alerts and status) in the parent location. In this case, the centralized management
group connects through the software development kit (SDK) and functions as an additional console on each of the connected management groups.”
However moderators in this forum have stated
“Each management group has its own set of SQL Servers and Management Servers \ Gateways. It also adds considerably to administrative overhead. I'd try to avoid
multiple management groups where possible.”
” It will get expensive in terms of hardware and software with multiple management groups and you will duplicate a lot of work with regards to overrides”
“If you go with multiple Management Groups then you would need to add on a fair number of SQL licenses plus additional hardware. “
“Presumably if I have multiple management groups will that mean I will have to
create rules for each Management Group- correct. Same
with overrides. It could add a lot of administrative overhead. “
It would seem easier to just deploy one management group with the management servers in one datacenter but I’m concerned with performance. I’ve heard
stories about SCOM deployments architected in this way not performing well because of network latency. i.e admins from all regions besides the region local to the SCOM deployment not wanting to use SCOM because application performance is too slow.
What would the SCOM experts recommend for this scenario?
MH

1) My question is around whether to use multiple management groups or one?
Factors to consider in determine the number of Management group
• Scaling
• Agents separated from their management server by WAN-speed network links
• Political, administrative or security requirements within the organization requiring separate management groups.
• A view of AD DS topology required across multiple forests.
• A dedicated management group required for auditing purposes.
• Disaster recovery functionality required.
• Consolidated views of connected management groups required in Operations Manager.
• Operations Manager integration with the VMM console.
With refer to your situation
a) 1,000 Windows servers
b) All servers on the same Active Directory domain
c) 10 Mbps links between data centers.
It is suggest that one Management group is required.
2) It would seem easier to just deploy one management group with the management servers in one datacenter but I’m concerned with performance
It is recommend that you should deploy Gateway server in region office which has more than 10 agents.
• Gateway server reduce network bandwidth utilization. Agents located across WAN links consume network bandwidth, potentially affecting service delivery to and from the remote location. A gateway server can consolidate the traffic.
Roger

2 way Connected Management Groups in OpsMgr 2007

Hi,
Are there any issues in having 2 way connected management groups in 2007R2.
Site 1 is used in Jan, with Site 2 in standby but we want to see Alerts for Site 2 on site 1 so have connected Site 1 to Site 2 via connected management groups.
Following month site 2 is used with site 1 in standby, we can view Site 2 alerts via site 1 but not the rest of site 2 information
So if we link Site 2 to Site 1 we could monitor site 1 with site 2 in detail?
This a good idea or are there big overheads xfering info both ways?
Thanks

Hi,
As the connected management group is mainly for viewing and interacting with all the alerts and other monitoring data, I think this should related to the amount of the data.
Connecting Management Groups in Operations Manager
http://technet.microsoft.com/en-us/library/hh230698.aspx
Connected Management Groups in OpsMgr 2007 – How it works
http://blogs.technet.com/b/operationsmgr/archive/2009/03/04/connected-management-groups-in-opsmgr-2007-how-it-works.aspx
Thanks.
Nicholas Li
TechNet Community Support

SCOM Connected Management Group to SCSM Connector not working

Hi
We have successfully connected 3 management groups using Connected Management Group . I can see the alerts from all the 3 MG in one console. I also configured SCSM connector and connected to the local Management where the other 2 are connected . I can successfully
forward the alerts from that MG which is registered in SCSM , but when I try to forward the alerts from the other 2 mg I get the below message on the respective Management servers . Is connected management group supported in SCSM . Or am I missing any step
need
Log Name:      Operations Manager
Source:        DataAccessLayer
Date:          11/4/2014 4:58:20 PM
Event ID:      33333
Task Category: None
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      server
Description:
Data Access Layer rejected retry on SqlError:
Request: AlertUpdate -- (AlertId=c89b3ebc-2e45-47e9-a6d8-e96c05b787f3), (BaseManagedEntityId=9f8aa0d1-1b31-d133-e66a-a91830a42405), (ResolutionState=0), (Owner=), (CustomField1=), (CustomField2=), (CustomField3=), (CustomField4=), (CustomField5=), (CustomField6=),
(CustomField7=), (CustomField8=), (CustomField9=), (CustomField10=), (Comments=Alert modified by user), (TimeLastModified=10/14/2014 5:28:11 AM), (ModifiedBy=xx\xxxx), (TicketId=), (ConnectorId=a680dc76-2fc2-429d-b6dd-d1a851e9bd8f), (ModifyingConnectorId=),
(TfsWorkItemId=), (TfsWorkItemOwner=), (RETURN_VALUE=1)
Class: 16
Number: 547
Message: The UPDATE statement conflicted with the FOREIGN KEY constraint "FK_Alert_ConnectorId". The conflict occurred in database "OperationsManager", table "dbo.Connector", column 'ConnectorId'.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="DataAccessLayer" />
    <EventID Qualifiers="32768">33333</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-11-05T00:58:20.000000000Z" />
    <EventRecordID>35534</EventRecordID>
    <Channel>Operations Manager</Channel>
    <Computer>server</Computer>
    <Security />
</System>
<EventData>
    <Data>AlertUpdate -- (AlertId=c89b3ebc-2e45-47e9-a6d8-e96c05b787f3), (BaseManagedEntityId=9f8aa0d1-1b31-d133-e66a-a91830a42405), (ResolutionState=0), (Owner=), (CustomField1=), (CustomField2=), (CustomField3=), (CustomField4=), (CustomField5=),
(CustomField6=), (CustomField7=), (CustomField8=), (CustomField9=), (CustomField10=), (Comments=Alert modified by user), (TimeLastModified=10/14/2014 5:28:11 AM), (ModifiedBy=FAREAST\v-sanaug), (TicketId=), (ConnectorId=a680dc76-2fc2-429d-b6dd-d1a851e9bd8f),
(ModifyingConnectorId=), (TfsWorkItemId=), (TfsWorkItemOwner=), (RETURN_VALUE=1)</Data>
    <Data>16</Data>
    <Data>547</Data>
    <Data>The UPDATE statement conflicted with the FOREIGN KEY constraint "FK_Alert_ConnectorId". The conflict occurred in database "OperationsManager", table "dbo.Connector", column 'ConnectorId'.</Data>
</EventData>
</Event>

For Fix error 33333, you can refer below links
http://opsmgradmin.blogspot.com/2011/05/scom-event-id-33333-in-scom-from-source.html
http://blogs.technet.com/b/smsandmom/archive/2008/03/13/opsmgr-2007-dataaccesslayer-event-id-33333-with-should-not-generate-data-about-this-managed-object.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Custom dashboard view for multiple connected management groups

Hi all,
I've connected 2 scom management groups and I'm able to see the connected alerts in the alert views.
Is it also possible to show those connected alerts in a dashboard view ? Because the Show Connected Alerts - button is not availble in dashboards views. Is it possible to filter on mgmt group in dashboard views ?
Kind Regards,
J. M.

It is possible, but not without customization. Also, as Alexis mentioned, you could populate a custom field with management group information. It's overkill to use SCORCH just for this, as this could be achieved with much less effort using the command
channel and a relatively simply powershell script...
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Connected Management Groups

I'm currently reviewing a design that has multiple management groups (for scale), with a root management group containing
no agents or devices at all, but simply connecting to each of the other groups using CMG's.
It's my understanding that data does not traverse through CMG's. It simply allows a single unified view of the alert data of each CMG, so I'm confused as to why you would have this root MG, and all it's supporting infrastructure (OpsDB, DW DB etc)
when there's no agents at all.
Wouldn't you just have the other MG's (all containing agents) in a CMG configuration, i.e connecting to a single 'local MG' that also has agents.
Cheers,
E

Hi,
Connected management groups enable the consolidation of alerts and the running of tasks from multiple management groups. Tasks can be initiated from a local management group to run on managed objects of a connected management group. This scenario is used
to scale up the number of managed computers or objects you can monitor beyond the capabilities of a single management group.
The management group in which the data is consolidated is called the local management group, and those that contribute their data to the local management group are called the connected management groups. They relate to each other in a hierarchical fashion,
with connected groups reporting up to local groups. The connected groups are in a peer-to-peer relationship with each other. Each connected group has no visibility or interaction with the other connected groups; the visibility is strictly from the local management
group to the connected management group.
Deploying the Connected Management Groups Scenario
http://technet.microsoft.com/en-us/library/bb418761.aspx
Managing Connected Management Groups in Operations Manager 2007
http://technet.microsoft.com/en-us/library/cc540367.aspx
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

The selected objects cannot be joined as they are invalid objects,( Compound paths, closed paths, Text Objects, Graphs, Live Paint group). You can use Join command to connect two or more paths, paths in groups; ot to close an open path.

Hi I was trying to join two Ractangle Tool objects but getting this type of Error in illustrator cs6 :-
The selected objects cannot be joined as they are invalid objects,( Compound paths, closed paths, Text Objects, Graphs, Live Paint group).
You can use Join command to connect two or more paths, paths in groups; ot to close an open path.
Please assist me asap.

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
This sound like a firewall issue. I would start by disabling the firewall and seeing if you can connect. If this works then you know where the problem is,
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

A Thread manages a connection from the outside--help me to finish it

**RUN THIS CODE AND HELP ME--- THANKS A LOT**
EchoClient is thread which manage a connection from the outside.
import java.io.BufferedReader;
import java.io.InputStreamReader;
import java.io.PrintWriter;
import java.net.ServerSocket;
import java.net.Socket;
import java.util.Random;
public class EchoClient extends Thread {
     private ServerSocket listenSocket = null;
     private Socket manageSocket = null;
     private int[] port = new int[9999];
     private BufferedReader in;
     private PrintWriter out;
     private int line;
     private int count;
     // No needed to mention
            //private ClientNode[] clientArray = new ClientNode[9999];
     private ManageClient[] manageClient;
     private final int CONNECTED = 1;
     private final int CONNECTING = 11;
     private final int DISCONECTED = 2;
     public void run() {
          try {
               manageClient = new ManageClient[9999];
               listenSocket = new ServerSocket(903);
               manageSocket = listenSocket.accept();
               while (true) {
                    in = new BufferedReader(new InputStreamReader(manageSocket
                              .getInputStream()));
                    out = new PrintWriter(manageSocket.getOutputStream());
                    line = in.read();
     // if Client send a variable(CONNECTING)
            // Server will send to Client a variable(CONNECTED) and port
            //to open a ChatFrame with that port
                    if (line == CONNECTING) {
                         System.out.print("have recieved");
          out.print(CONNECTED);
                     //randomize a port to send to client
          port[count] = (int) Math.ceil(Math.random() * 9999)
                    //creat a manageClient(Thread) to manage a seperate
                   // connection with a seperate Client
                         manageClient[count] = new ManageClient(port[count]);
                         manageClient[count].start();
                         out.print(port[count]);
                         count++;
          } catch (Exception e) {
               e.printStackTrace();
     public static void main(String[] args) {
          EchoClient e = new EchoClient();
          e.start();
}And a Login Frame which will send to server a varialble (CONNECTING) which requires to connect and keep waiting for a variable to Open a ChatFrame with a new port
import java.awt.FlowLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.BufferedReader;
import java.io.InputStreamReader;
import java.io.PrintWriter;
import java.net.Socket;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTextArea;
public class Login extends JFrame {
     public ChatFrame chatFrame;
     private final int CONNECTED = 1;
     private final int CONNECTING = 11;
      * @param args
     public Login() {
          // TODO Auto-generated method stub
          setSize(50, 150);
          JButton loginButton = new JButton("Login");
          JPanel p = new JPanel();
          p.setLayout(new FlowLayout());
          p.add(loginButton);
          add(p);
          loginButton.addActionListener(new ActionListener() {
               @Override
               public void actionPerformed(ActionEvent e) {
                    loginServer();
     public void loginServer() {
          try {
               Socket connectSocket = new Socket("127.0.0.1", 903);
               while (true) {
                    BufferedReader in = new BufferedReader(new InputStreamReader(
                              connectSocket.getInputStream()));
                    PrintWriter out = new PrintWriter(connectSocket
                              .getOutputStream());
                    out.print(CONNECTING);
                    System.out.println("At here");
//(***position***)
                    int line = in.read();
                    System.out.println("At here1");
                    if (line == CONNECTED) {
                         int port = in.read();
                         chatFrame = new ChatFrame(port);
                         chatFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
                         chatFrame.show();
                         connectSocket.close();
          } catch (Exception exp) {
               exp.printStackTrace();
     public static void main(String[] args) {
          Login login = new Login();
          login.show();
          login.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
}and this is ManageClient Thread...
import java.io.BufferedReader;
import java.io.InputStreamReader;
import java.io.PrintWriter;
import java.net.ServerSocket;
import java.net.Socket;
public class ManageClient extends Thread {
     private ServerSocket ssClient;
     private Socket sClient;
     private int port;
     public ManageClient(int port) {
          this.port = port;
     public int getPort() {
          return port;
     public void run() {
          try {
               ssClient = new ServerSocket(getPort());
               sClient = ssClient.accept();
               while (true) {
                    BufferedReader in = new BufferedReader(new InputStreamReader(
                              sClient.getInputStream()));
                    PrintWriter out = new PrintWriter(sClient.getOutputStream());
                    String s = in.readLine();
                    if (s != null)
                         out.print("have recieved");
          } catch (Exception e) {
               e.printStackTrace();
}my problem...
At firts EchoClient will run.. and then Login but when I click to the Login button it has just only did before int line = in.readLine();(*** postion ***)
I don't know why it doesn't continue. It stops here and the login button is still visible(cause code has not finish)..
That's my problem...
Somebody help me
Edited by: rockfanskid on Oct 17, 2007 4:25 AM

Somebody helps me to finish this project...
thanks for racing this thread

How Transaction Manager work with Resource Manager, like Connection pool?

hi,
I'm using BEA Webloigc8.1 Stateless Session Bean/DAO/Oracle stored proc.
but I'm not quite clear how Transaction Manager work with Resource Manager, like Connection pool.
my understanding is that, in a weblogic transaction, a stateless session bean interact with several DAOs, and for each method of DAO a connection is acquired from connection pool. I've heard that the connection will not return to pool until the transaction commits.
My question is that, does it mean that for a weblogic transaction, multiple connections might be allocated to it? and if multiple connections are allocated, then how many oracle transactions would be started? or multiple connections share the same oracle transaction?
I didn't feel it make sense to start multiple oracle transactions, cause deadlock might be incurred in a single weblogic transaction.
any help appreciated!

Xin Zhuang wrote:
hi,
I'm using BEA Webloigc8.1 Stateless Session Bean/DAO/Oracle stored proc.
but I'm not quite clear how Transaction Manager work with Resource Manager, like Connection pool.
my understanding is that, in a weblogic transaction, a stateless session bean interact with several DAOs, and for each method of DAO a connection is acquired from connection pool. I've heard that the connection will not return to pool until the transaction commits.
My question is that, does it mean that for a weblogic transaction, multiple connections might be allocated to it? and if multiple connections are allocated, then how many oracle transactions would be started? or multiple connections share the same oracle transaction?
I didn't feel it make sense to start multiple oracle transactions, cause deadlock might be incurred in a single weblogic transaction.
any help appreciated!Hi. If you configure your WLS DataSource to use keep a connection for
the duration of a tx, it will do that, and in any case there can be
no deadlock however many connections operate for a given XA transaction.
Here is the best coding form for DAOs or any other user-written code
for using WebLogic DataSources. This is important for two reasons:
1 - Thread-safety is maintained as long as the connection is a
method-level object.
2 - It is crucial to notify WebLogic that you are done with a connection
ASAP, by your calling close() on it. We will then put it back in the
pool, or keep it under the covers for your next request if it's in a
transaction etc. The pool is optimized for quick get-use-close scenarios.
public void one_of_my_main_JDBC_Methods()
Connection con=null; // Must be a method level object for thread-safety
// It will be closed by the end of the method.
try {
con = myDataSource.getConnection(); // Get the connection in the try
// block, directly from the WebLogic
// datasource
// do all the JDBC within this try block. You can pass the
// connection to subordinate methods, but not to anywhere
// that thinks it can use the connection later.
rs.close(); // close any result set asap
stmt.close(); // then close any statement asap
// When you're done with JDBC
con.close(); // close the connection asap
con = null; // nullify it so the finally knows it's done
catch (Exception e) {
// do whatever catch stuff you want. You don't
// need a catch block if you don't want one...
finally {
// It is important to close a JDBC connection ASAP when it's not needed.
// without fail, and regardless of exit path. Do everything in your
// finally block in it's own try-catch-ignore so everything is done.
try { if (con != null) con.close();} catch (Exception ignore){}
return ret;
}

How does Kodo manage DB connection pools?

Hi,
As per the documentation, JDO options MinPool and MaxPool are no longer
part of the specification. I expect this means the JDO implementation is
supposed to manage database connection pools appropriately. Now, I would
like to understand Kodo's approach to this, and whether I have any control
on pool configuration at all via the deprecated MinPool and MaxPool
properties -or are these properties simply ignored.
On a related topic, I am confused about the effects of closing
PersistenceMangers after every use, from a performance point of view (if
the connection pool is not managed by Kodo, am I incurring additional
overhead by not re-using a PersistenceManager?). I have read in different
places in the documentation that it is good to re-use PersistenceManagers
as well as the fact that although PersistenceManagers are
garbage-collected and connection resources freed as a result, it is
recommended to call close() on them anyway. Bottom line, are there any
side-effects to religiously asking the PersistenceManagerFactory (I have
several, one each for the different data sources I use) for a new
PersistenceManager at the beginning of each method and calling close() in
a finally{} clause?
I'm sorry if this has been answered elsewhere - I'd appreciate it if you'd
just point me to the discussion if so.
Thanks.
-Krishna Choppella
Digital Harbor, Inc.

would like to understand Kodo's approach to this, and whether I have any
control on pool configuration at all via the deprecated MinPool and
MaxPool properties -or are these properties simply ignored.Currently, Kodo uses the MinPool and MaxPool properties to configure the
JDBC connection pool. Starting with version 3.0, Kodo will use separate
pooling properties.
Bottom
line, are there any side-effects to religiously asking the
PersistenceManagerFactory (I have several, one each for the different
data sources I use) for a new PersistenceManager at the beginning of
each method and calling close() in a finally{} clause?Well, you miss out on the simple object caching employed by PMs. Each PM
keeps a cache of the objects it manages. Reusing a PM allows it to build
up a bigger cache, and makes calls to getObjectById and 1-1 relation
traversals faster.
Additionally, each cached object maintains state in its persistent fields
(subject to the RetainValues setting and other settings), so retrieving
object state can be faster when the object is already cached and has
already been read.
However, if you employ Kodo's L2 caching plugin (Performance Pack), then
you get all these benefits regardless of whether or not you re-use
individual PMs.

I can listen to the Music Library in my Ipad through home sharing, but I can't do it in my Iphone. When Iphone managed to connect my Mac, I can see how a watch turns clockwise but it stops when it arrives at a half of the watch. What can I do?

I can listen to the Music Library in my Ipad through home sharing, but I can't do it in my Iphone. When Iphone managed to connect my Mac, I can see how a watch turns clockwise but it stops when it arrives at a half of the watch. What can I do?

Hi there,
You may want to take a look at some of the troubleshooting steps found in the article below.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Hope that helps,
Griff W.

AcquireConnection method call to the connection manager Excel connection Manager failed

I used VS Studio 2008 (BIDS version 10.50.2500.0) on an WinXp machine (v 5.1.2600 SP3 Build 2600) to create a package that writes multiple query results to different tabbed sheets of a single excel spreadsheet. The package was working just fine and has run
successfully multiple times, but all of a sudden when opening the project, every single Data Flow task with an Excel Connection Manager displayed error icons. Each raises the following error message when attempting to open the Advanced Editor:
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005 Description: "Unspecified error". Error at DataFlow task name: SSIS error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method
call to the connection manager Excel connection Manager failed with error code 0xC0202009. There may be error messages posted before this with more information on why the Acquire Connection method call failed. Exception from HRESULT: 0Xc020801c (Microsoft.SQlServer.DTSPipelineWrap)
From the time I created the original package (when it worked fine) until now:
1) I have been using the same computer, the same login account and the same permissions.
2) I have been writing to the same (32 bit) 2010 Excel file (which I created) in a folder on my local machine.
3) The filename and location have not changed; a template file is used each time to move and overwrite the previous file. Both are in the same locations.
4) I can independently open the target Excel file and the template Excel files with no errors.
6) The ConnectionString has not changed. The Connnection String I am using is
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\Conversion\Conversion\Results_dt01.xlsx;Extended Properties="EXCEL 12.0 XML;HDR=YES;".
7) Run64BitRuntime is set to False.
8) Delay Validation is set to true
9) This is not running under a SQL job
10) There are no child packages being run
I CAN create a NEW Excel Connection Manager, assigning it the exact same target Excel spreadsheet, successfully, but when I attempt to assign it to the Data Flow destination this error occurs:
"Test connection failed because of an error in initializing provider. Unspecified error."
Thinking that the driver might be corrupt, I opened a second SSIS package, which also uses the Excel Connection Manager (same driver) and this package continues to work fine on the same workstation with no errors.
I have searched online for causes of this error for many hours and found nothing that helps me to solve this issue.
Does anyone have any suggestions for me?

Yes, I have verified that the Excel file is not in use or opened by anyone, including me. It has been two months since I opened this particular package, although I have been working with other packages in this project. I just discovered that another
package in the same project has the same problem - all Data Flows that output to an Excel Destination now have the same error icons. This second packages outputs to an entirely different Excel file than in the first package. A summay:
Package #1 has error on every Excel Destination and uses templateA to overwrite fileA and then writes to fileA
Package #2 has error on every Excel Desintation and uses templateB to overwrite fileB and then writes to fileB
Package #3 has no error on any Excel Destination and is linked to multiple files (none are A or B)
Package #1 and #2 are in the same project, but Package #3 is in a separate project .
I will try replacing the Excel files with new ones for Package 1 and 2.

[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
Mudassar

Thats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to manage a connection with powershell using visual studio with C#

Hi
I want to manage a connection with powershell for a web app using visual studio with c#. and also run command with pipeline
Plz give a some suggestions..

Hi Raj_Kumar_Saini,
To make things clear, could you please clarify these thing?
1. Do you mean you want to execute some PowerShell scripts from C# language? These blogposts may give you some ideas:
Executing PowerShell scripts from C#
Powershell Automation and Remoting (a c# love story)
Execute PowerShell from a ASP.NET Web Application
2. Is your question related to Visual Studio Integration? Do you want to build a Visual Studio Extension?
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"Configuration Manager cannot connect to the site" after site update from SP1 to R2

Our dev SCCM environment only has a single primary site with a remote SQL database. Initially, the dev primary site had SP1 Beta (5.00.7782.1000) installed but as everyone is aware there is no upgrade path available to SP1 or R2 from Beta; so, we uninstalled
the site and removed the database, re-installed SP1 non-Beta (5.00.7804.1000), then proceeded to update all devices with the latest client agent. Afterwards, we attempted to upgrade the site from SP1 non-Beta (5.00.7804.1000) to R2 (5.00.7958.1000).
All seemed well until we attempt to open the Configuration Manager console and we get the following error message:
Configuration Manager cannot connect to the site (Site Name)
The Configuration Manager Administrator console could not connect to the Configuration Manager site database. Verify the version of the console is compatible with the version of the site server you are connecting to and then try to connect again.
So we tried reinstalling the console directly from here...
"C:\Program Files\Microsoft Configuration Manager\tools\ConsoleSetup\AdminConsole.msi"
still the same error message persisted, so we tried installing it from here...
"C:\Program Files\Microsoft Configuration Manager\tools\ConsoleSetup\ConsoleSetup.exe"
still the same error message persisted, so then we tried installing it directly from the R2 (5.00.7958.1000) installation media, and afterwards the same error message persisted....
All along, we were checking the AdminConsole log from here:
"C:\Program Files (x86)\Microsoft Configuration Manager\AdminConsole\AdminUILog\SmsAdminUI.log"
Here are the contents:
[4, PID:4836][04/22/2014 15:21:10] :Property: 'Features'\r\nSystem.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObjectBase.get_Item(String name)\r\nManagementException details:
[4, PID:4836][04/22/2014 15:21:10] :ReadExtraProperties: Failed to initialize extra properties
[4, PID:4836][04/22/2014 15:21:11] :Transport error; failed to connect, message: 'The Configuration Manager Administrator console could not connect to the Configuration Manager site database. Verify the version of the console is compatible with the version
of the site server you are connecting to and then try to connect again.'\r\nMicrosoft.ConfigurationManagement.ManagementProvider.SmsConnectionWithDetailException\r\nThe Configuration Manager Administrator console could not connect to the Configuration Manager
site database. Verify the version of the console is compatible with the version of the site server you are connecting to and then try to connect again.\r\n at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.ValidateConnectionParameters(ConnectionManagerBase
connection)
at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)\r\nNo details are available for this error.\r\n
Once again, we validated we could connect to the SQL database from this box, and that the console was at the same version as the site. Any help or guidance with getting our access to the console restored after the SP1 to R2 upgrade would be greatly
appreciated.

From the Primary Site Server, I tried uninstalling the Admin Console and re-installing using:
consolesetup.exe /q TargetDir="%ProgramFiles%\Microsoft Configuration Manager" EnableSQM=0 DefaultSiteServerName=<SiteServerName>
Of course replacing <SiteServerName> with the FQDN of my Primary Site Server. Console installed successfully however the same error message persists.
Also tried installing the console on a clean Windows Server 2008 R2 installation. I tried it from the R2 (5.00.7958.1000) installation media, from the "C:\Program Files\Microsoft Configuration Manager\tools\ConsoleSetup\" both without any luck, the
same error message persists. I verified I could ping the FQDN of the site server also, and that the firewall between the two permits communication over the ports listed here: http://technet.microsoft.com/en-us/library/hh427328.aspx
Any help would be greatly appreciated.

Management Group Connection (SDK): Close Connection

Similar Messages

Maybe you are looking for