Manual install of GPRS settings on X68GB?

Hi!
I just purchased a Nokia X68GB and i can make a phonecall with it and also send and receive text messages,but the Internet connection and MMS does not work.
I received automatic instal instructions from my operator via SMS,but they does not work. When contacting the operator regarding the fact that the Internet connection still does not work i was told to instal the GPRS settings manually.
This is the instructions the Operator provides with:
To set up your GPRS settings manually, set the following parameters:
Profilename: Parlino GPRS
URL: wap.parlino.se
Proxy: 130.244.196.090
APN: internet.parlino.se
Username: <empty>
Password: <empty>
My problem is that i can´t find where in the phone i should type in these settings. I have read the instruction manual,yet i still can´t find where to type these parameters.
Does anyone has the knowledge to guide me where to write these parameters?
Thank´s in advance!
Solved!
Go to Solution.

Hi and thank´s for your reply,pudu!
I appreciate your help,however, the instructions you gave did not work.
Yesterday i received an email from Nokia with instructions how to manually install GPRS settings on my X68GB,and now i can connect to Internet.
These are the instructions i was given that helped me to solve the case:
1) Press the Menu button, then 'Settings', then 'Connections', then 'Destinations.' and finally 'Internet'.
2) Make sure the list that appears here is empty. We do this by selecting all possible access points are, and then press 'Options' and 'Clear'.
3) Press 'Options' and 'New access point' - now you will be asked if you want to search for available access points - answer 'No'.
4) Select 'Packet' and name it 'Parlino GPRS' and press 'OK'
5) Now our new access point, turned up, so select it and press 'Options' and 'edit'
6) Press 'Options' and 'Advanced'. Highlight this 'Proxy address' and enter 130. 244. 196. 090. Press 'OK'and then 'Back'.
7) Press the 'Connection Name' and enter internet.parlino.se, then press OK
8) Press the 'Home' and enter wap.parlino.se, press OK. Then press back until you return to the home screen.
The settings are now finished and your Service Provider given you correct information so you should be able to access the Internet.
These instructions worked for me,so i now consider the problem as solved. Hope these instructions can be helpful for anyone if they get the same problem.

Similar Messages

X2-02 Cannot add gprs settings manually

i bought this phone yesterday and i cannot find a way to add gprs settings to this phone ,service providers are still not have any settings to this phone yet. i know the apn and all but the add new option that all other nokia phones had is not there . confused i think im not the only one whos having this matter

You can find the GPRS settings in
Menu > Settings > Connectivity > Packet Data > Packet data settings > Active Access Point.
You should be able to edit the active access point in another row there in the menu which should have the Access Point Name and the access point URL.

Manually Installed Agent is not showing up in the Operations Manager Console Under Pending Management.

Hi Community,
I submitted this question because I'm a bit stuck with SCOM 2012 R2, I'll try to explain briefly what is happening right now in my environment, we have a DEV SCOM Deployment in which all the roles are installed in a single server, this servers is a
VMware machine running Windows Server 2008R2.
The Initial installation of the SCOM Operations Manager and all the other components was not performed by me but by a co-worker, unfortunately he doesn't remember much about the initial configuration. So i had to pickup where he left things about a year
ago, neither of us are SCOM experts, and we have almost no previous experience with previous versions of this application.
Now the problem that I'm facing is the following, all the DEV Servers are Domain Controllers and one of the indication within the "Guide for System Center Management Pack for Active Directory for Operations Manager 2012" states the following
Configuration
Supported?
Agent-less monitoring
No
After my first review I notice that our servers were being monitor by agent-less mode and given the above statement from the Operations Guide the only way that we could ever get those domain controllers monitor by SCOM would be by installing the agent on
each server, so I read somewhere (Can't remember where) that in order to install the agents in all the servers I should first remove them from the Agent-less node, which I did. Then I tried to use the discovery wizard to get the agent install in all of them
but it didn't matter how many times I try the servers never show up.
I read in a Tech Net Article that you had to modify the security settings so SCOM would let me decide if I wanted to approve it or not.
--> http://technet.microsoft.com/en-us/library/hh212853.aspx
I performed the suggested steps from the article but still the servers were not showing up, not even if I run the Discovery wizard, so I decided to go and perform the installation manually in a couple of servers I was able to install the agent in one of
the Domain Controllers, I configured the agent to use a service account that has Domain Admin rights. An hour after I installed the agent I went back to the Operations Console Manager and I check under Pending Action but the Server was not showing up. So i
went back to the Internet to try to find out if someone else had experience the same problem, and in one website some mentioned that if the servers were not showing up it was probably because they were still register in the SCOM Database, now I have no idea
of how i can check that or How can i remove them from there to have them available again, but what troubles me the most is that even after i installed the agent manually the server were not being recognize.
I went to the Event Viewer and I found one particular event that caught my attention, see below :
Log Name: Operations Manager
Source: Health Service Modules
Date: 6/12/2014 12:48:19 PM
Event ID: 11551
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: MyManagementServer
Description:
Computer verification failure for Machine Name: MyManagementServe is 0x800706BA. The RPC server is unavailable.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Health Service Modules" />
 <EventID Qualifiers="49152">11551</EventID>
 <Level>2</Level>
 <Task>0</Task>
 <Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2014-06-12T16:48:19.000000000Z" />
 <EventRecordID>1945680</EventRecordID>
 <Channel>Operations Manager</Channel>
 <Computer>MyManagementServer</Computer>
 <Security />
</System>
<EventData>
 <Data>MyManagementServe</Data>
 <Data>0x800706BA</Data>
 <Data>The RPC server is unavailable.</Data>
</EventData>
</Event>
Not sure if this is related to the problem that I'm facing right now, but , I make sure that the RPC Services were running and also the related dependencies too. There's no Firewall enable in any of the servers and DNS seems to be working properly.
Ports 135 / 5723 are open and listening so since I ran out of ideas, I would like to know if some of the experts in this field could perhaps give me some guidelines.
There's one caveat that I haven't mention yet and that is related to SQL, I checked and my user just has read access to SQL i'm not sure if that could affect this but i think is worth mentioning.
My main goal is to have all the servers showing up in the Operations Manager Console.
So thanks all in advance !
Oscar Loria

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

How to set gprs settings in i phone 4

Dear Sir
How to set GPRS settings in i phone 4 pls send me the details
Thanks

See pages 11 and 135 of the iPhone User Manual:
iPhone User Guide (For iOS 6.1 Software)

Windows 10 upgrade from 7 Pro: No internet and cannot manually install drivers for adapters...

PC: HP Proboook 4510SPrevious OS: Windows 7 Pro 32-bitNew OS: Windows 10 Pro 32 bit Issue: I upgraded to windows 10 from 7 pro and some of my internal devices dont have drivers. I could fix this issue quickly if two of them were not my ethernet card and wireless adapter. Right now I only have 2 adapters listed under network adapters and both are virtual VM ethernet cards. Neither of these can establish a connection through a router I know is working on other laptops in my house. The error I get is that the IP address cannot be resolved. The odd part is that when I look at the details for the VM ethernet cards it shows a good DHCP IP and subnet....TX/RX is no good though as it only shows sending packets and not recieving them. I tried to manually install the windows 7 drivers from a USB stick. I got them off of HP's website. I installed them but it did nothing. However, I was having no luck and restarted and they momentarily showed up in the adapters list (under network settings in control panel). Then as soon as I tried to enable them they went away and I still have no internet. Not sure what is going on or what to do. If I cannot install the HP drivers and get them to work, and I cannot connect to the internet to let windows fix the problem I seem to be stuck.. Please Help.

Hello , I understand that your secondary DVD drive is not recognizable as an optical device on your desktop computer after upgrading to Windows 10. I would be happy to assist you in this matter! When you examine the installed drives in the BIOS, does the 2nd DVD drive appear? What brand are the two DVD drives? What is the product number for your computer? Below is a is an HP Support document that will demonstrate how to find your computer's product number.
How Do I Find My Model Number or Product Number? In the meantime, I recommend following the steps in this document on HP PCs - Updating Drivers and Software with Windows Update (Windows 10, 8). This should help to install any possible updates required to run the secondary DVD drive. Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards

Manually Install Froyo 2.2 on Droid Incredible

Hello all!
Didn't get your update OTA yet? Do it yourself!
How to Manually Install Android 2.2 Froyo On Your Verizon Droid Incredible
I just did it and it was easy! Enjoy
Nick

tr1kst4nce wrote:
Ok... so for those few on this thread who have installed it... I have a couple of newbie questions.
1. How do you know you have the 2.2 update? The only thing I can think of is to go into the camera and check for the 720p thing.
Go to menu -> settings -> about phone -> software // That'll give you the version
2. What all did you get on the update? Hotspot? 720p HD video capability? What? Anything else?
Pretty icons, city ID that never stops, Skype mobile whether you want it or not, the ability to rotate the screen to the right now instead of just the left. Seriously, not a lot. Definitely nothing for people to ose sleep over. *edit** I forgot one important thing - I hear that it also enables bluetooth voice dialing. I haven't tried it yet. If this is true, then I would say that the update gets a definite +1. This is a feature that, even though I rarely need it, should be standard on every phone in existence.
3. What exactly is the "root" folder it talks about when doing it manually? And is it safe to do it this way? Especially off of some site.
The root of the SDcard just means to put the downloaded file on your sd card, but NOT in a folder. Just drop it on there, all by it's lonesome. It has nothing to do with "rooting" your phone, in case you were curious. That's an entirely different animal.
Hope that helps a bit! Enjoy.
Sorry for the newbie questions. Your help is appreciated.

Installed addons and settings

I would like to see a list of installed addons and settings (manual/mandatory/active etc.).
I want to run a query in SQL server to get this information.
Is this information stored in any table?
I want to get this info by query in SQL server because it is faster than logging into each database and checking the addon administration.
Thanks

Hi Maeve,
The Addon information is split between the SBO-COMMON database (which holds details of which addons are installed on the whole system) and the OARI and ARI1 company tables which hold information on which addons are enabled in the current company and what user-specific startup settings have been defined:
select
     T1.AddOnId, T1.PName as [Addon Manufacturer], T1.AName as [Addon Name],
     T1.AddOnVer as [Addon Version], T0.AStatus as [Active in Company],
     case T0.EGroup when 'D' then 'Disabled' when 'M' then 'Manual' when 'A' then 'Automatic' else 'Mandatory' end as [Default Startup],
     T2.USER_CODE as [User Code], T2.EnableFlag as [Enabled],
     case T2.AddOnType when 'D' then 'Disabled' when 'M' then 'Manual' when 'A' then 'Automatic' else null end as [User Startup]
from
     OARI T0
     inner join [SBO-COMMON]..SARI T1 on T0.AddOnID = T1.AddOnId
     left outer join ARI1 T2 on T0.AddOnID = T2.AddOnId
The query above will show you details on the addons defined in Addon Administration in the current company. If any users have a startup option that is different from default then they will be shown as separate records. If all the users have the defaul settings for the addon then you'll see a single row of the addon with null values in the user columns.
Note: Make sure you don't return the ABinary column in the [SBO-COMMON]..SARI table. This column holds a binary copy of the addon installer and can be MBs in size which will make the query very slow.
Kind Regards,
Owen

TS1702 i can't open all apps that i manually installed. when i try to open one, it asks me to log in to my apple account and when i do it, it says that my apple id or password is incorrect. does anyone can help me to fix this problem?

i upgrade my 3gs to os 6.1 but starting then all my manually installed apps does work and every time I open them, it asks me to log in to my apple account but responds that my password is incorrect. I tried to change my password but i never received the confirmation email. Does anyone know how to fix this?

Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How can I do a manual install of ACR 7.4 in 64-bit Win 7 PSE 11?

I found detailed instructions on this forum that I think were for 32-bit Win 7 but I'm hoping 64-bit install is different since I followed them and still no success. I know that 8.1 is supposed to be able to be manually installed and that would be ok too but I really only need to go from 7.1 to 7.4 and the update function is greyed out. I started with a trial version on that machine so maybe that has something to do with it? It is registered and activated. Tried to uninstall/re-install and still no luck(didn't check the "de-activate" though so maybe I need to try again and choose this?
Not afraid to try a manual install if it is in fact different.
This is the thread I followed - http://forums.adobe.com/thread/1266134
I have the PSE 11 on a Mac platform also and was able to update it no problem...can't get the Win 7 to work for the life of me.
Thanks for any responses.

Glad it worked.
There is one more thing you should install and those are the camera raw profiles for 8.1
Download the 8.1 DNG Converter and run the installer to install the camera raw profiles.
(those profiles would normally be installed if the updater in your pse 11 was working)
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5597

Manual install of Flash Player

I have a Power PC based Macbook pro running 10.5.1. For some
reason my flash player stopped working and now when I try to
install it, it tells me the installation failed and that I need to
manually install it. They (Firefox I suppose) even provide a button
for the "manual Install" but this just takes me back to the
"Download Flash Player" page and gives me no information on how a
manual install is done. When I try and do the same thing through
Safari it tells me I don't have the necessary administrative power
to complete the install. I am th only user of the machine and the
administrator. I have FLASH the program. If I reinstall that might
it replace my flash player? Can anyone help me?

There are two different versions of Flash for Windows, the '''''ActiveX''''' version for IE and the '''Plugin''' version used by Firefox and most other browsers.
1.Download the Flash Plugin version setup file from here: 
[http://download.macromedia.com/pub/flashplayer/current/install_flash_player_32bit.exe Adobe Flash - 32-bit Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

I wish to use the previous version not the one that has today been automatically installed. My settings were to let me know and I decide to install when I'm ready

I wish to use the previous version not the one that has today been automatically installed. My settings were to let me know and I decide to install when I'm ready, how do I go back. This because one of the previous Plugins does not work with this version, and they have no fix for it yet!

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

How to manually install driver? Not detecting sound c

Hi,
My problem is when installing off the cd and off the downloaded driver it will not detect a creative product. I have li've! 5. with windows SP2. All I want to do is install the driver, doing it the windows search way does not work.
I want do MANUALLY do it, where are the sound card drivers located in windows so I can extract the files to there?
KX project makes my front speakers sound like rear so that is not a fix.

How to manually install drivers. Explore your installation CD or also the extracted creative downloaded web drivers (Use winrar to extract the exe file to your hard dri've)?Location of the "Creative Driver Update Utility"?X:\Audio\Drivers\?Double-click the file "Setup.exe"
Make sure "Driver Installation" box is checked and also check the box "Overwrite existing shared Creative audio driver files"?Click "OK"?This will take sometime to install the drivers. You'll be?asked to reboot?your computer. Thats it!
?Message Edited by freesky on 08-25-200705:20 AM

While trying to update Adobe Reader XI 10.0.06 to 10.0.07 on my laptop running W7 Home Premium x 64, I get error message 2203. The same occurs if I try to uninstall before manually install the new version. Can you please help?

Hello,
While trying to update Adobe Reader XI 10.0.06 to 10.0.07 on my laptop running W7 Home Premium x 64, I get error message 2203. The same occurs if I try to uninstall before manually install the new version. Can you please help?
PS.- Thank you very much for your Support in trying to solve a problem created by yourselves.
Message was edited by: Juan Verano

Is there anything else beside the number 2203?
Try removing the current Reader using http://labs.adobe.com/downloads/acrobatcleaner.html, then install 11.0.07 from http://get.adobe.com/reader/enterprise/

Delete gprs settings in nokia c3-00

How can I delete the gprs settings in nokia c3-00

. Go to setting-configuration settings- personal configuration settings-add new- web. Don't enter any data in any field & press back. Then press again add new-access point. Again don't enter data in any field & press back. Now select each of them & activate them as default. Come back to config settings-default config settings- personal- activate. Then select activate default in all apps. Then select prefered access point & select the one labelled as My access point.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

I am trying to update itunes software to 10.5 but I get an error message saying to try manually installing and I try that and it still doesn't work, Help!!

I am trying to update itunes software to 10.5 but I get an error message saying to try manually installing, HELP!!!

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Manual install of GPRS settings on X68GB?

Similar Messages

Maybe you are looking for