Map 2 NAS shares with the same name.

Hello,
I can map each of them, but not two at a time.
let´s say server1 has a share called "public" and server2 the same share.
No, rename of the share is not possible.
Any idea?
Pls. help!!!
Thx
Hans

I just discovered this after trying frivolously to get 2 shares of the same name from 2 different NAS drives to auto mount ....
limitation with autofs or something ? it should really be painless, as it is in windows. but it seems on the mac side, OS X won't allow shares with the same name to auto mount ....

Similar Messages

Mounting Remote Shares with the Same Name

I am accessing shares on remote servers and can mount volumes with no problems initially, using command+k and setting the Server Address to smb://ServerNameOrIP/SharePoint. This mounts a volume with the name of the share point. The problem I've run into is at work I need to mount 2 volumes on 2 different servers with the same share point name. These are shared servers, and for unrelated reasons the folder names on either server can not be changed. This doesn't work well for me. It creates the first volume with the name "Share" and a second one that in finder appears to be called "Share" as well, but if I use "Get Info" or in Terminal run ls /Volumes I can see that it actually gets mounted as "Share-1".
Is it possible to change the name of one (or both) of these mounts? Mostly so I can see which one I'm on when browsing though Finder. I changed some settings in Finder so that the title bar allows me to see whether I'm on "Share" or "Share-1" but that doesn't actually tell me what server I'm on. Any ideas?

I just discovered this after trying frivolously to get 2 shares of the same name from 2 different NAS drives to auto mount ....
limitation with autofs or something ? it should really be painless, as it is in windows. but it seems on the mac side, OS X won't allow shares with the same name to auto mount ....

Network volumes with the same name

Hi everybody.
I recently got a Mac at the office. Yay! But I have an issue with network volumes. There are several machines I need to connect to using smb/cifs. Two of our development servers (Linux servers using smb/cifs) are configured to share each user's home directory. Naturally, my user name on both machines is the same, and therefore so is the name of the smb share. Unfortunately, MacOS X uses the share name as the volume name when it connects. This means I have two volumes with the same name, so I can't make any aliases or have any quick access to them. That's because aliases resolve to the first of them which was mounted, regardless of which of them they were made to originally.
Other people in the office use Windows to access the shares, which poses no problem because in Windows you either give the full path of the share (including host name, which makes the paths distinct), or map a distinct drive to the share. I also mount them from my Linux, but on Linux you explicitly give the mount point, and thus make it distinct.
Any way to make the volumes distinct on the Mac? Otherwise to make aliases resolve correctly in such a setup?

there are several ways you can deal with this. first, you can use command line mount_smbfs command. it does let you specify a mount point. you can easily automate the process of creating a mount point and mounting the share using automator so you don't have to do it by hand every time. and you can also add the automator workflow to mount the shares to your login items. then it will happen automatically on every login. lastly, you can use autofs or add entries to /etc/fstab to automount the smb shares on startup. both methods let you specify mount points too. see this link for details
http://rajeev.name/2007/11/23/autofs-goodness-in-apples-leopard-105-part-ii/

Sharing two folders with the same name

Hi all.
I have two folders with the same name and I would like to be able to share these under different share names. Problem is, this doesn't seem to be possible.
For instance, try doing this in File Sharing under Server Preferences:
* Click +, add /Data/Media
* Edit permissions on "Media" to permit guest access
* Click +, add /Volumes/Drobo/Media
* Edit permissions on "Media" (make sure you click the right one!) to permit guess access.
This appears on the surface to work, but what it has actually done is to delete the share for /Data/Media. If you exit the File Sharing pane and go back into it again, it will be gone.
Server Admin has the ability to rename a share's name from AFP,SMB,FTP,etc. but this doesn't appear to help either -- I tried adding the second media first, renaming its shared name to Media2 over in Server Admin, and then adding the first. Server Preferences just deletes the second one.
Such a basic thing as being able to rename the share from Server Preferences would appear to be enough to get around this, but since Apple didn't make it possible, I have no idea how to proceed.
Does anyone else have this working, and how did you do it?

The best way to solve this, would be make sure you use database paraneter GLOBAL_NAME, to change your database from lets say orcl1 to orcl1.mycorpdomain.com, by this you can make sure each database actualy has a different name. Your other database then could be named orcl1.example.com.
When chaning the display name in EM you might face other issues later on when for instance trying to run a restore using EM for one of these databases.
Regards
Rob
http://oemgc.wordpress.com

Can I create a lot of instance with the same name?

I have, for a project in my studies, to create a map for an adventure game. I must create monsters on this map. For this I use a class that I called Creature. In my class Map i have to initialise the monsters but I
choose their quantity with Math.random() so I don't know how much the map will contain. If in a loop I do: Creature monster = new Creature(); will I have different instances with the same name(I doubt)? Will I have one monster re-created in each iteration of the loop? How can I do to have different monsters in different places (my map is a matrix 2x2)?

You would have many Creature references made, but only one variable to hold them, and it would go out of scope outside your loop. You could create a Creature array or use a List (both defined outside your loop) - as
// array
int numCreatures = randomGeneratedCreatureQuantity();
Creature[] monsters = new Creature[numCreatures];
for (int j = 0; j < numCreatures; j++) {
monsters[j] = new Creature();
// Or a list
int numCreatures = randomGeneratedCreatureQuantity();
ArrayList monsters = new ArrayList();
for (int j = 0; j < numCreatures; j++) {
monsters.add(new Creature());
}Good luck
Lee

Hiding Fields with the same name

I have multiple fields across a form with the same name
TxtName#1
TxtName#2
TxtName#3..... TxtName#24
They are all share the same name because they should all have the same data.
I want to be able to hide some of these fields, based on the number entered in another field TxtQty.
for example if TxtQty=2 then
TxtName#3-TxtName#24 will be hidden and only TxtName#1 and TxtName#2 will be visible.
Can anyone please help?
Thanks!

The easiest way is to rename TxtName #1 and #2 to "TxtName2", and use the following custom Validate script for each:
// Copy this field's value to the TxtName fields
getField("TxtName").value = event.value;
You can then hide all of the TxtName fields with:
getField("TxtName").display = display.hidden;

Bean property and public field found with the same name: getid

Hi all,
I have a ejb jar file contains some local entity beans and one session bean
, the session bean has some functions suck as findXXXByQuery() , InsertXXX()
, and I have created some model class for the entity bean , and use it as
the parameter or return type of the session bean , then I want to transfer
the session bean as a webservice , using ant automaticly . All this function
successfully in weblogic 6.1 , but when I want to run ant command in
weblogic 7.0 , an error occured :
[servicegen] weblogic.xml.schema.binding.BindingException: Error: bean
property
and public field found with the same name: getid
Yes , I have a getid field in table , a getid in entity bean , and a getid
property in model class , but what different does it make ? Would you mind
to test my jar file ? I send all files as attachments .
Any advice will be appreciate .
lcl
[build.xml]
[work.jar]

In article <[email protected]>, lcl <[email protected]> wrote:
-=-=-=-=-=-
Hi all,
I have a ejb jar file contains some local entity beans and one session bean
, the session bean has some functions suck as findXXXByQuery() , InsertXXX()
, and I have created some model class for the entity bean , and use it as
the parameter or return type of the session bean , then I want to transfer
the session bean as a webservice , using ant automaticly . All this function
successfully in weblogic 6.1 , but when I want to run ant command in
weblogic 7.0 , an error occured :
[servicegen] weblogic.xml.schema.binding.BindingException: Error: bean
property
and public field found with the same name: getid
Yes , I have a getid field in table , a getid in entity bean , and a getid
property in model class , but what different does it make ? Would you mind
to test my jar file ? I send all files as attachments .
Any advice will be appreciate .
lcl
-=-=-=-=-=-For better or worse the JAX-RPC spec requires this behavior. From
section 5.4.1:
"There is no standard mapping for the case when a JavaBean property
has the same name as a public field. A Java to XML mapping
implementation is required to flag this case as an error."
Since you are not the first person to run into this restriction I'm
beginning to think we need an option to bypass it.
--Scott

Use two VIs with the same name, different functionality on a single Project

Hi, I'm working with vision builder al labview, I need to integrate the vision builder migration Vis into my main program, (Is not an option), but I have multiple Vis autogenerated with the same name, how can i integrate them in the same project without dependency problems
Thanks in advance

Hi,
Unless you really need tight integration between the Vision code and the rest of your LabVIEW application, or would rather not have to pay for a Vision Builder AI runtime license on the targets on which you want to deploy your final application, I would recommend you look into using the Vision Builder AI LabVIEW API instead of migrating the inspection to LabVIEW.
The API allows to control Vision Builder AI by launching a Vision Builder AI engine, running the inspection and retrieving resulting images and results.
The advantage of the API is that it allows for easier modification and debugging of the Vision Inspection that you designed in Vision Builder, if you need to make changes later. (i.e. all you need to do is open the inspection in Vision Builder AI, modify parameters, add steps etc).
You won't have to change your LabVIEW application, unless you want to output additional results.
When you build and deploy your application, you will need to install Vision Builder AI on the target machine and get a runtime license for it.
Migrating the inspection to LabVIEW is a one way deal. If you need to make changes to the inspection, you will have to migrate the inspection again, or modify the code outside of the Vision Builder AI environment.
As you might have noticed, the code generated is quite complex, and it is recommended to go this route only if you need really tight integration/synchronization between the vision code and the rest or your LabVIEW code, or if you would rather pay for a cheaper Vision runtime license rather than a VBAI runtime license for the deployment machine (in case of deploying multiple systems where cost is a big consideration).
Vision Builder AI API examples are located in this folder:
C:\Program Files (x86)\National Instruments\Vision Builder AI\API Examples\LabVIEW Examples
Hope this helps clarify the use cases and help you make the right decision for your design.
Best regards,
Christophe

HT1473 Often times when I copy a CD into my library it breaks the CD into more than one Album, all with the same name but with only a few of the songs on each. This happens whenever the CD has music with more than one artists...like maybe duets.

Often times when I copy a CD into my library it will break my CD into multiple albums in my library, each with only a few songs.
Usually this is because there might be songs where the artists has other artists in the song.
How can I compile all of the different albums (all with the same name by the way) back into one as was the original disc?

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

I tried to make another account on my school Macbook Pro, made the Admin, account with the same name as the one I was using, deleted it and then all my desktop data is gone.

So, the problem is,
I used these school Macs right? They're school handed and stuff. Then one day I decided I want admin so I do this thing where I "reset" everything on the Macbook using this Video (at the bottom) http://www.wikihow.com/Reset-a-Lost-Admin-Password-on-Mac-OS-X
Then I do it, it takes me to the new User. That's not what I want so I shut down, then made an account with the same name as my current account (let's call it Y). Then I delete Y on purpose. I deleted it because I didn't want my school to know I had this account. Realise I wanted it again so I made an account, let's call it X then when I have X I deleted Y. Then I realised my AirDrop name said X so then I made a new account, this time let's call it Z, with Z I delete X and then I deleted Z because I don't want my school to know I have Z but then Z is also the same name as my main/current account. Somehow or something I delete my current account leaving me with Z. Now I can see my account and stuff but don't know how to restore it.
Picture will be provides later.
PLEASE PLEASE PLEASE HELP ME. I HAVE SCHOOL TOMORROW AND I DON'T WANT MY PARENTS TO FIND OUT.

It is a bad idea to hack computer passwords when you don't own the computer
Good luck with the school and the parents.

Custom fields with the same name in Project Online

Today I discovered something interesting when creating custom fields in Project Online.
I usually create a certain set of custom fields that are useful to have on both the project and the task level. An example of these is Reportable, which I use to determine which tasks to roll up into reports and also which projects overall to report on.
So I created a project level custom field called Reportable. No problem.
I then created a custom field on the task level called Reportable. And the computer said no!
I then learned that although you could do this in Project Server 2013, you can't in Project Online. You can't have duplicate custom field names, even if they are of different types.
This has led me to use a naming standard, such as Reportable Task and Reportable Project. But I really don't like that as codes are for computers, not us humans. So I hope this changes in the future, but for now you just need to think about how you approach
the fields.
Good luck!
Ryan Darby
National Manager PMO
www.ipmo.com.au
www.projectonline.com.au

Hi Ryan,
I would follow Ben on this..
Just made a test on a Project 2013 instance on-premise and I cannot create a task ECF and a project ECF with the same name. The same test on a Online instance returns the same result: the ECF names must be unique whatever the entity is.
Waiting for Ben's confirmation.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How to create reports servers with the same name in two nodes in Reports

Greetings
We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
Thanks
Ramiro Ortiz.

Hello.
I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
osfind: Found 2 agents at port 14000
HOST: SNMVBOGOAS10.sena.red
HOST: SNMVBOGOAS09.sena.red
osfind: There are no OADs running on in your domain.
osfind: There are no Object Implementations registered with OADs.
osfind: Following are the list of Implementations started manually.
HOST: SNMVBOGOAS10.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep2
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep2
HOST: SNMVBOGOAS09.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep
Any Ideas?

How to apply different keyboard shortcuts to an actions with the same name but in different menus within one application?

Hi,
Hopefully someone can help. I have the application "djay" and in two different menus there is the action "Eject". I was wondering if it's possible to apply different keyboard shortcuts to those actions with the same name? I can't see how to do it as it seems you can only write the action but as there are two it doesn't seem to work for me.
For example:
djay>Table-1>Eject - ⌘⇧1
djay>Table-2>Eject - ⌘⇧0
Thanks in advance for any help!!

A NodeList doesn't only contain 1 element. In your example it contains ALL <Data> elements inside the document.
NodeList nodes = document.getElementsByTagName("Data");
System.out.println(nodes.getLength() + " \"Data\"-elements found");
for(int i=0; i<nodes.getLength(); i++) {
Node node = nodes.item(i);
}

I have two iphone 4's with the same name on one computer. Can I change the name of one so that I can sync each phone separately

I have two iphone 4's with the same name on one computer. Can I change the name of one so that I can sync contacts separately?

How to rename your device in iTunes

How can i distinguish two controls with the same name?

I'm recording automated tests with VS 2012 Coded Ui Test for testing a web application.
In that web application it is possible to enter data in something looking like a list.
There is - per example - an Edit control sitting on a ColumnHeader with the name/text "Description".
Below that header is another Edit control for data input - containing the text "Description" too and which lies on a Cell control.
When i playback my recording, Coded UI Test looks for a control with the name "Description" and gets the one, it finds at first.
In that case the Edit on the ColumnHeader, which causes an exception, when the Text will be setted with the data input from the recording.
Unfortunately the controls have no ID.
Is there a way to distinguish controls with the same name?
Thanks in advance!

Hi Patrick Pirzer,
>>Is there a way to distinguish controls with the same name?
Based on the blog "How does “Coded UI test” finds a control ??", we know that to really find a control, it would be related to the unique properties as the search properties,
so if two controls have the same property, please use other unique property as the search property would be better.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Map 2 NAS shares with the same name.

Similar Messages

Maybe you are looking for