Mapping 0MATERIAL to 0MAT_SALES in ABAP code.

Hi
The primary key of 0MAT_SALES is material and sales org. How do I perform the following in ABAP?
IF data_package comp code is between 3000 and 3999
Use comp code in combination with material in mapping to 0MAT_SALES
Else
Use sales org in combination with material in mapping to 0MAT_SALES
Thanks and kind regards,
Torben

Hello Torben ,
Try the below steps
Data : ws_matsales type data_package-matsales
Use comp code in combination with material in mapping to 0MAT_SALES
IF data_package-comp_code LE 3999 AND GE 3000.
Select 0mat_sales from /bi0/pmat_sales into ws_matsales where comp_code = data_package-comp_code AND material = data_package-material
Else
Use sales org in combination with material in mapping to 0MAT_SALES
Select 0mat_sales from /bi0/pmat_sales into ws_matsales where sales org = data_package-sales_org AND material = data_package-material
ENDIF
RESULT = ws_matsales
Hope it helps
Mann

Similar Messages

ABAP code which will use function module during field mapping in LSMW

Hi,
During field mapping in LSMW, for one of the field called field, I want to use a function module 'QF05_RANDOM_INTEGER', which will generate random numbers and map that random number to that field.
How do I write ABAP code which uses function module, during filed mapping for a particluar field in LSMW ?
Please help...
Regards,
Tushar.

Hi Tushar,
You can write in FORM ROUTINE and LSMW.
I hope you know how to write ABAP code at field level.
If not ...
Come to change mode->select the field->Rule->ABAP Code
write a perform statement in ABAP code at field level.
PERFORM test using val
 changing valu.
Go to Utilities(at menu)->switch layout-> extras ->select Layout->check Form routine-> it will display a FORM Routine... at bottom
this is the place where you can write some code for
 FORM test using value
 changing value1
FM call....
.ENDFORM
Get the value1 returned and use for the Field population.
Reward points if this Helps.
Manish
Message was edited by:
 Manish Kumar

Debug ABAP code used for ABAP mapping

Hi Experts,
I have worked on Abap mapping. I have executed the code in SE24 to acheive desired mapping and the desired output is also generated.
attached below is a part of the code i have used:
method IF_MAPPING~EXECUTE.
* initialize iXML
TYPE-POOLS: ixml.
CLASS cl_ixml DEFINITION LOAD.
* create main factory
DATA: ixmlfactory TYPE REF TO if_ixml.
ixmlfactory = cl_ixml=>create( ).
* create stream factory
DATA: streamfactory TYPE REF TO if_ixml_stream_factory.
streamfactory = ixmlfactory->create_stream_factory( ).
* create input stream
DATA: istream TYPE REF TO if_ixml_istream.
istream = streamfactory->create_istream_xstring( source ).
* parse input document =================================================
* initialize input document
DATA: idocument TYPE REF TO if_ixml_document.
idocument = ixmlfactory->create_document( ).
* parse input document
DATA: iparser TYPE REF TO if_ixml_parser.
iparser = ixmlfactory->create_parser( stream_factory = streamfactory
istream = istream
document = idocument ).
iparser->parse( ).
I just want to debug and see if an input is provided how does each of these methods make a difference to it.
I tried to input some value in the SOURCE parameter on executing the code but it is not working fine.
Could you please suggest hiw i should go about so that i can see the exact way the input Xstring is affected by each of these methods in the debugger.
Help will be appreciated.
Many thanks,
Neha
Edited by: Neha Nagrani on Jul 7, 2008 11:46 AM

Hi Neha,
Write a Small Report as Folows:
1. Create your XMl payload of Type xSTRING.
2. Call the method EXECUTE
Place a Breakpoint on the method. and then keep debugging inside.
the SetParamter method is obviously called from inside.
This is the Simplesrt Solution.
Reward points if useful
Regards,
Abhishek

ABAP code needed to convert from 0calmonth2 & 0calyear to 0calmonth

Hi SAP GURUS,
Can anybody give me the ABAP code to convert from 0calmonth2 and 0calyear to 0calmonth.and please suggest me whether i have to write start routine or end routine in transformations.
Thanks ALL.

hi,
in the transformation map 0calmonth2 and 0calyear to the 0calmonth field, and from drop down choose routine.
there will be an area where it will be mentioned write your piece of code below this line.
paste the below code:
Concatenate source_fields-0calmonth2 source_fields-0calyear into result.
also delete the line result = .
save the routine and execute the package.
regards,
Arvind.

ABAP code in to JAVA for overwritting condition value for IPC pricing

Dear experts i am an IPC JAVA developer and i am trying to translate an ABAP Routine in to JAVA code for overwriting condition value in the pricing user exit of IPC
Here is the ABAPcode segment i am trying to transulate
DATA: l_kdkg1 LIKE komk-kdkg1,
        l_work TYPE f,
        l_umren LIKE marm-umren,
        l_umrez LIKE marm-umrez.
SELECT SINGLE peinh FROM mbew INTO mbew-peinh
WHERE matnr = komp-matnr
AND bwkey = komp-werks.
I need some help in the following things
1. I don't know how to transulate the following Line of ABAP code into JAVA
     " AND bwkey = komp-werks."
Bwkey stands for plant details. I don't know how to get plant details from Pricing Item.
2. Someone please tell me weather the following JAVA transulation is correct
Vector x = prItem.getUserExitConditions();
db database = pricingEngine.getDatabase();
     // set table name
String tableStart = "mbew";
     // set query parameters
sys_query_pair[] queryPair = null;
//matnr = komp-matnr . Getting the material Number
String materialNo= prItem.getProduct().toString();
//bwkey = komp-werks.Getting plant.
// TODO: werks stands for plant. Not sure how to get it from prItem
   String plant = "";
   queryPair = new sys_query_pair[2];
   queryPair[0] = new sys_query_pair("matnr", materialNo);
   queryPair[1] = new sys_query_pair("bwkey", plant);
// set query columns
   String ZZFIELDStart = "peinh";
   String ZZFIELD_VALUEStart;
   String[] projectionStart;
   projectionStart = new String[];
   BigDecimal pricingUnit = null;
   try{
      // execute query
      res resultSetStart = database.db_read_table(tableStart, queryPair,projectionStart) ;
      if (!res.db_empty_results_p(resultSetStart))
     ZZFIELD_VALUEStart = resultSetStart.db_get_row_element_string(0);
     pricingUnit = new BigDecimal(ZZFIELD_VALUEStart);
     resultSetStart.db_finish();
   else
     System.out.println("Coudn't find a value of field peinh in table mbew!");
   catch (exc_database_error e)
     e.printStackTrace();

Please login to the server where IPC is installed. In the IPC folder u find libs folder or search for docs in IPC folder. There it is dealt how ABAP routines are mapped to user exits in java coding
Thanks
Surya

ABAP code in Survey suite

Hi,
We have requirement to map survey values from flat file.For example I have question which accept multiple values like
Intersted in below products...
Windows
Unix
DOS
If pass these three vaues in flat file, I am not getting any error.However If I pass only one value like windows, keep unix and DOS fields blank, I am getting mapping format error in External list.
Does anyone knows how to configure this scenario? I know we have option in ELM Mapping format to write ABAP code, Can we achieve this using ABAP?
Thanks for your time.
Cheers,
Ajay

Hi Ajay,
It must be because the IDOC is expecting details for all three values.
Better use abap coding to map them.
Best Regards,
Pratik Patel

LSMW (ABAP Code Rule)

Hi All,
I have to upload data in transaction code MD61 (Planned Independent Requirement) for a year, that is, 12 months.
The requirement date and planned quantity have fields EDATU & PLNMG, respectively. If I'm going to input 12 months, the fields will become EDATU_01, EDATU_02... EDATU_12 and PLNMG_01 to PLNMG_12. However, the screen during background processing only has 10 rows, resulting to an incorrect session in SM35 with error: "Field RM60E-EDATU(11) does not exist in the screen SAPLM60E 0200".
Is there a way that I can use ABAP Code in LSMW's conversion rules for me to be able to upload 12 entries in MD61?
Thanks a lot in advance!
Best regards,
Olyn

Hi,
While recording did you come across the 11th and 12th row as well?
if not, once the recording is done try to insert those two in the recording list manually. And then in the field mapping try to map this with the 11th and 12th field you have in your structure.

How to insert abap code in LSMW generated program?

hi,
i m working on LSMW for loading data in SAP
i would like to insert abap code into the generated program....
it's because i have 1 BKPF segment (header data), 2 BSEG segments, but i cannot define rules by customizing for the second BSEG segment(LSMW doesn't permitt).
i already tried to insert code directly into the program, but obviously it disapears at each time i generate the program.
i saw that apparently a code insertion has already be made into this program and the subject of this insertion is to define rules for the second BSEG (exactly what i want to do....) and this modification doesn't disapear at new prog generation.....
Any idea ?

Hi
Why dont you use the FORM provided by LSMW
To use this please do the following
1.Goto option Maintain Field Mapping and Conversion Rules
2.Goto menu EXTRAS->LAYOUT->Form Routines
Here you will now get many options like
Global Data
Begin of Transaction
Begin of Processing
Begin of Record
like wise the End of these also.
Please put a breakpoint and check where you want to insert your code.
Note:
This is only for the Conversion Program and does not affect the main program used to update the Standard Tables
Hi , I was reading your earlier post .. It seems that you have worked on EMIGALL. Consider a similar situation, it is like writing the code in the events till CALL01...
Thanks
DOminic
Message was edited by: Dominic Pappaly

Problem with abap code in lsmw.its urgent

Hello guys iam migrating open ar line items using lsmwand i need to create reconciliation key automatically so iam using below code which is working fine in abap editor but i inserted in the lsmw abap code block at step 5 mapping fields iam getting error as that function module does not exits .can any body go through the code and give me suggestion.your will be greatly appreciate.
types: begin of ty_fikey,
 fikey type fikey_kk,
 resob type resob_kk,
 end of ty_fikey.
data: wa_fikey type ty_fikey.
CALL FUNCTION 'FKK_FIKEY_CHECK'
EXPORTING
 I_FIKEY = 'jana56481'
I_OPEN_ON_REQUEST =
I_OPEN_WITHOUT_DIALOG =
I_FOR_MASS_POSTING =
 I_RESOB = '24 '
I_RESKY = ' '
I_NON_EXISTING_ALLOWED = ' '
I_FOR_POSTING_IN_UPD = ' '
EXCEPTIONS
NON_EXISTING = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
select single fikey resob from dfkksumc into corresponding fields of wa_fikey where resob = '24'.
e1bpdfkkko-fikey = wa_fikey-fikey.
Regards
Janapathi

Hi,
Refer link:
<a href="http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc">http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc</a>
Pls do reward points.
Regards,
Ameet

Change Prg name in classes using abap code

Hello Experts,
I'm having following req:-
I need to change program name using abap code .
I have prepared report which changing prg name & also it is replecting target name into T-code & Programes where source prg name is being used.
My next req is i want to replace sorce prg name in Classes usinf abap coding.
<Priority normalized by moderator>
Thanxs in Advance.
Moderator message : Requirements dumping not allowed, thread locked.
Edited by: Vinod Kumar on Feb 7, 2012 12:32 PM

The application name is not necessarily uniqueue! Customers may create two applications with same name in different systems/clients and transport them into the same target system/client!
You do the mapping with the query:
CL_FDT_FACTORY=>GET_INSTANCE( )->GET_QUERY()->...
There are two methods. One for mapping ID to name and one for name to ID.
There is also a sample report in package SFDT_DEMO_OBJECTS.

Abap Code to populate source system id

Hi , so kind of All of you,
please help me, i have written the code in one to one mapping in transformation routine in BI 7,0 right click on zzsourcsys and go tp rule details. No syntax errors in the code but when i load there is no value populating to zzsourcsys . i have defined zzsourcsys as 12 char. can u suggest where it is going wrong, i checked in tools assignment of sourcesystem id is there in my system.
Abap Code
TYPE-POOLS: RSSM.
Data: G_S_MINFO TYPE RSSM_S_MINFO.
RESULT = G_S_MINFO-LOGSYS.
Thanks
Poonam Roy

You have to write the code (in BI/BW) in the transfer rule (between Datasource transfer structure and infosource/info object)
There the FORM begin with
[code]USING RECORD_NO LIKE SY-TABIX
 TRAN_STRUCTURE TYPE TRANSFER_STRUCTURE
 G_S_MINFO TYPE RSSM_S_MINFO
CHANGING RESULT TYPE /BI0/OIPERSON
 G_T_ERRORLOG TYPE rssm_t_errorlog_int
 RETURNCODE LIKE SY-SUBRC
 ABORT LIKE SY-SUBRC. set ABORT <> 0 to cancel datapackag[/code]
GS_MIN_INFO structure RSSM_S_MINFO contains information on the request being processed.
G_S_MINFO. This passes technical information about the data load request,
such as requesting user, request date and time, update mode, the handling of
duplicate records, error handling flags, parallel processing flags, and what data
targets to update.
If tou want to use start-routine for optimization reasons and fill an empty field in transfer structure, the structure G_S_MINFO is available too.
[code]USING G_S_MINFO TYPE RSSM_S_MINFO
CHANGING DATAPAK type TAB_TRANSTRU
 G_T_ERRORLOG TYPE rssm_t_errorlog_int
 ABORT LIKE SY-SUBRC. set ABORT <> 0 to cancel datapackage[/code]
And stay in FORM between limits :
[code]$$ begin of routine
$$ end of routine[/code]
Update RESULT in first case, and field(s) of DATAPAK in second case.
[code]RESULT = G_S_MINFO-LOGSYS.[/code] or
[code]LOOP AT DATAPAK INTO l_s_datapak_line.
l_s_datapak_line-zzsourcsys = G_S_MINFO-LOGSYS.
MODIFY DATAPAK FROM l_s_datapak_line.
ENDLOOP.[/code]
Regards

ABAP Code + API

Hello Friends,
I have to write a method in ABAP equivelent to java method, here is the jave source code.
private String constructID(String id)
    StringBuffer str = new StringBuffer("0000000000");
    str.append(id);
    return str.substring(id.length());
(Just explain shortly what it is doing!)
I am trying to call the BAPI (BAPI_BUPA_CENTRAL_GETDETAIL), and in oder to call this BAPI I have to export the BUSINESSPARTNER parameter. This parameter has been stored in DB with 10 char e.g 0000000001 . As I am developing web interface so the user can enter BUSINESSPARTNER No = 1, and this java code will map the user enter 1 to 0000000001.
I want to ask, is there online API avaiable for ABAP which helps me to write this equivelent code or is there any method like append() or subString() in ABAP ( as I am very new to ABAP so please excuse me if I bothers you )
Many thanks!
Marek.

If I understand correctly, you need to make "1" look like "0000000001" using ABAP code.   Try the following code. This should work for you.
Regards,
Rich Heilman
report zrich_0004 .
data: char(10) type c value '1'.
data: numc(10) type n.
numc = char.
write:/ char.
write:/ numc.

Is it possible to write an abap code be SAP SQL query.(ECC 6)

hello guys,
Is it possible to write an abap code be SAP SQL query.
Scenario : table A has a field say f1 of length 10 and table B has a field say s1 of lenght 20. in sap sql i am able to link all the other tables but i am not able to link
table Af1 --->Table Bs1. as the length doesnot match. so is it possibel that using abap code I can pick 10 characters from table A field f1 adjust it to 20 characters using abap and map it to field s1 of table B.
Please let me know how to accomplish this if possible.
thanks in advance!!

Herm,
Adding code is done in the infoset.
Please do following:
> Goto SQ02
> Type in the infoset that the basis for your query, <change>
> Press <code> OR <shift><f8>
> Tou'll see 4 tabs: Extras, Selections, Code, Enhancements.
> GoTo tab Code
> Choose the coding section (<f4> gives you an overview)
> Enter the code.
You may set a breakpoint to see what the query in SQ01 will do with it.
Succes!
Frank

ABAP code to Enhance Master data

Hi Friends,
can you send me a sample ABAP code to enhance the master data
Regards
Hari

Dear Adluru Hari Varma ,
Hereunder an example of code to enhance Master Data
0ART_SALES_ATTR for 0MAT_SALES:
EXIT_SAPLRSAP_002
DATA: l_biw_mvke_s LIKE biw_mvke_s,
l_tabix LIKE sy-tabix,
v_satnr LIKE mara-satnr.
CASE i_datasource.
WHEN '0ART_SALES_ATTR'.
LOOP AT i_t_data INTO l_biw_mvke_s.
l_tabix = sy-tabix.
clear v_satnr.
SELECT SINGLE satnr FROM MARA INTO v_satnr
where matnr = l_biw_mvke_s-matnr.
IF sy-subrc = 0.
l_biw_mvke_s-zzsatnr = v_satnr.
ENDIF.
MODIFY i_t_data FROM l_biw_mvke_s INDEX l_tabix.
ENDLOOP.
ENDCASE.
Also
the user exit code zxrsau02 to populate the new fields .say you add field zzfield1, user exit code zxrsau02 can be like
data : l_s_custattr like BIW_KNA1_S,
l_zzfield1 like tablexyz-fieldabc,
l_tabix like sy-tabix.
case i_datasource.
when '0customer_attr'.
loop at c_t_data into l_s_custattr.
l_tabix = sy-tabix.
fill the new field
select single fieldabc into l_zzfield1
where ....
l_s_custattr-zzfield1 = l_zzfield1.
modify c_t_data from l_s_custattr index l_tabix.
endloop.
take a look some links on enhancement
Enhancement
User exit
and download pdf 'enhancements in sap bw'
here you can find the steps ...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
hope this helps.
Re: enhancements
Check in SDN you will find more programs
Hope it helps.Revert back to me if you have any queries
Regards
Bala

Can i use any OWB mapping operator when i generate ABAP

it seems like in OWB mappings, if i have a SAP table as data source and i want to perform some operations (eg. JOIN, input parameters, expressions) i am limited to generating PLSQL code.
all i can get if i want ABAP generated code is a simple table (all records) column to column mappings ! is this true or am i missing some important steps ?
eg. how can i specify a date as input parameter to be used as a filter value on a SAP table before storing the results in a staging table ? keep in mind that i am expecting the extraction code to be in ABAP ...

You need to specify the join condition to generate ABAP code. Start by specfying a foreign key based on the join condition. In table 1, create a unique key. In table 2, create a foreign key based on the unique key of table 1.
There should not be any problem with the filter condition generating ABAP code. If you would like more specific assistance, log a technical assistance request (TAR) on MetaLink and Support can review your map.

Mapping 0MATERIAL to 0MAT_SALES in ABAP code.

Similar Messages

Maybe you are looking for