Mapping Type missing for Import Dimension via Interface Tables

Greetings Everyone,
I was wondering if anyone else had this issue. I have two Generic dimensions that I have created within the Shared Library. The issue that I'm having is that whenever I create a new profile for these two dimensions, there is never an option to Merge or Replace the dimension. I always have to "create new dimension" even though these dimensions exist within my shared library. This causes a problem because, I have to always perform a replace and it looks like be default, when creating a new dimension, it merges whatever values I have within the interface tables into the existing dimension.
Thanks,
Tammy Bian

Hi Vinodh,
Pls check if you have mapped the Alias table from Interface Area to Alias dimension in your import profile definition.  And then also check if association between Alias & entity is defined.
Thanks,
Darshana

Similar Messages

  • 11.1.X Missing Mapping Option Import Dimension via Interface Tables

    Greetings Everyone,
    I was wondering if anyone else had this issue. I have two Generic dimensions that I have created within the Shared Library. The issue that I'm having is that whenever I create a new profile for these two dimensions, there is never an option to Merge or Replace the dimension. I always have to "create new dimension" even though these dimensions exist within my shared library. This causes a problem because, I have to always perform a replace and it looks like be default, when creating a new dimension, it merges whatever values I have within the interface tables into the existing dimension.
    Thanks,
    Tammy Bian

    What version of 11 are you using? There's a bug w/ 11.1.1.2 and attribute dimensions. I don't think it matters if you're using interface tables or ads files. The bug is as follows:
    "Bug 8580222 - SUBSEQUENT DEPLOYMENT MAY DELETE AN ATTRIBUTEDIMENSION FROM PLANNING. This issue has been addressed in 11.1.1.2.02 service fix".
    We applied the following patches this past weekend and they addressed the issue:
    Planning 11.1.1.2.01 (required for the Planning .02 patch)
    Planning 11.1.1.2.02 (this fixes the issue with attribute dimensions)
    EPMA 11.1.1.2.01 (required for the Planning patch)
    APS 11.1.1.2.01 (required for the Planning patch)
    Hope this helps,
    - Jake

  • EPMA very slow to import large dimension from interface tables

    I am attempting to import a dimension into the master library from the EPMA interface tables. The dimension is roughly 255,000 members. The import from the interface tables into an empty dimension member is taking close to 3 hours. CPU utilization on the EPMA server is a steady 6% (epma_server.exe) for the entire time. We are on 11.1.2.1.001 of EPMA. The rest of the suite is at 11.1.2.1. The dimension generic type. I have had the same result when importing into a local dimension. The performance degrades after about 6000 members.
    Your thoughts would be much appreciated.

    I have found my answer from EPMA guide:
    In addition to the dimension interface tables created by the template script, you can add interface tables for additional dimensions. For example, the template script contains one set of tables for the Entity dimension. You can add more Entity dimensions as needed. For each dimension added to the interface tables, you must also include the dimension in the IM_Dimension system table so that the dimension is available during profile creation.

  • Best methods for importing artwork via Illustrator with tranparency?

    I'm new to Final Cut Pro and am tryin to figure out the best methods for importing artwork via Illustrator. So far, I've been saving the artwork as a transparent PNG, but I feel like there should be a better way. Any help would be greatly appreciated.
    Thanks,
    Mike
    MacBook Pro   Mac OS X (10.4.8)  

    Hi:
    Ussually I have to rebuild in AI the company logo (I use to work for industries) to include in FCP edit.
    - If you have CS2, open Photoshop and create a new file using the right preset (i.e. DV PAL) using transparent background. That creates a PSD empty file with all attributes you need (pixels dimensions and aspect ratio) to use later in FCP.
    - Select your work (i.e. the final logo) in the AI canvas and copy it.
    - Paste it in the empty PSD file as "vextor information" (I don't remember right now the exact words!). That way you can resize it in the PSD file without loosing quality.
    - The better ir deciding the size NOW in Photoshop, or create sveral version in different sizes. Yuo'll get better quality id you make the resizings in Photoshop rather that doing a scale in FCP timeline.
    - Once your logo is in the right dimension into the PSD file, save a copy and flatten all layers keeping the transparent background. If you don't need the layers during editing in FCP, you better have all layers flattened.
    - Import that file in FCP.
    That's my workflow, but probably you'll find different flavors here!
      Alberto

  • I keep getting the message that my registry settings are missing for importing and burning cd's and dvd's.  Why?

    I keep getting the message that my registry settings are missing for importing and burning cd's and dvd's.  Why?
    I've completely uninstalled iTunes per the support instructions and reinstalled.  But I still get the error message each
    time I click on the iTunes icon.  I went into iTunes support and searched for registry settings and got an error message 404.
    It was no help.

    Hey JWeaver208,
    Thanks for the question, and great troubleshooting so far. If you continue to see this message after uninstalling and re-installing iTunes, you may need to install the device filter in the Windows registry, as outlined in this resource:
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/TS3299
    Thanks,
    Matt M.

  • My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's and to reinstall. I do reinstall and it is still not there and I have at least 4 times.

    My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's. I have installed the latest up as well as uninstalled and then reinstalled a few times, at least 4. The registry settings are still not there and I cannot burn to a cd. HELP!!!

    To fix registry, refer to this article:
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/TS3299

  • Hibernate mapping XML files for the two SQL Server tables below.

    Hello all..,
    Question 1:
    I am working on a project that needs to support a database with an inherited legacy schema that you cannot change. The schema is provided below.Hibernate mapping XML files for the two SQL Server tables below. Please provide those two XML files. Assume some hypothetical package and class names. Assume that no "fancy" stuff such as lazy initialization, optimistic locking etc is needed at this time.
    CREATE TABLE [SURVEY_ANSWERS] (
    [ANSWER_ID] [int] IDENTITY (1,1) NOT NULL,
    [QUESTION_ID] [int] NOT NULL,
    [POSITION] [int] NULL,
    [TEXT] [varchar](350) NULL
    CREATE TABLE [dbo].[SURVEY_QUESTIONS] (
          [QUESTION_ID] [int] IDENTITY (1, 1) NOT NULL ,
          [TEXT] [varchar] (350) NULL
    GO
    ALTER TABLE SURVEY_ANSWERS
    ADD CONSTRAINT pk_SURVEY_ANSWERS PRIMARY KEY(ANSWER_ID,QUESTION_ID);
    ALTER TABLE [dbo].[SURVEY_QUESTIONS] ADD
           PRIMARY KEY  CLUSTERED
                [QUESTION_ID]
    GO
    ALTER TABLE [dbo].[SURVEY_ANSWERS] ADD
           FOREIGN KEY
                [QUESTION_ID]
          ) REFERENCES [dbo].[SURVEY_QUESTIONS] (
                [QUESTION_ID]
          )Question 2:
    Assume that you are working on a project developing, say, a banking application. You are the Architect and thinking that Hibernate ORM should be used for the entire access to the relational database. As usual, you have created (or auto-generated) a set of HBM XML files as well as POJOs for which you define the mappings. Assume now that a new requirement has just popped up. The system needs to be able to import new bank accounts and user information in bulk from a very large XML file at once and store it in the database. Assume the XML file contains all necessary information to populate fields in database tables. As performance is very important for this operation. Given this description, how would you approach the problem?
    Please describe briefly.
    -Thanks and regards
    Praveen Soni

    You're not fooling anyone Dennis_Mox. But nice try.Jeez, man. Mail me at denismox[at]yandex.ru, I will show you that exact test, dammit.

  • Itunes drivers missing for importing and burning CDs and DVDs are missing

    Hello,
    I have been dealing with the following problem for a couple days now, I have searched all over the internet, talked to friends and even Apple tech support but the problem has not been solved.
    Whenever I access itunes, I get the following warning: "The registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other burning software. Please reinstall itunes."
    I have now reinstalled itunes several times and completely removed then reinstalled as instructed, but the message continues to appear and itunes will not allow me to burn cds. Tech support advised to create a new user account on my computer which I did, it seemed to work but all I can do is import music. I cannot burn any. All my settings and playlists aren't on this account. But, are on my other one where the first message appeared.
    Can anyone help? Please. I have struggled with this and cannot figure out what else to do except reset my computer to its factory setting, but would really like to avoid doing so. Please help.
    I have a new HP computer running Windows Vista, I have never experienced any problems with itunes until now. I bought a new 120GB ipod in November and it works fine. Oh, I have gotten rid of Nero which was installed when this problem first occurred.
    Thank you.

    Hmm. "iTunes registry error Vista fix burning and importing issues". play around with the search words till you find something relevant. Not sure, but following is something that might help. I am not a vista user so I can't help much. Good luck.
    http://www.vistax64.com/software/194044-itunes-registry-error.html
    *But be warned that messing with registry might be fatal to your current OS intallation. So think all the way through before you do anything. I think you can keep a back of the registry so if something goes wrong you can restore it, but thats in XP, not sure about vista.*

  • Why are the drivers missing for importing and burning cd's and DVD's after a new installation of the software?

    I have just downloaded iTunes for 64-bit Windows 7, 7 times and I and got this error message:
    "The registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing.  This can happen as a result of installing other CD burning software. Please reinstall." 
    This is a new hard drive, and there are no other CD burning software installed other than Windows Media Player which was pre-installed...There has never been any conflicts with any of the other previous versions of iTunes with WMP.  I have reinstalled iTunes about 7 times and have come to the conclusion that the software is faulty, because all 7 times, I continuously get the exact same error message. This version of iTunes doesn't recognize my iPhone, iTouch, iPad, or Apple TV.  My music however is stored in the cloud, but having to constantly download 6,000 plus songs over and over again is time consuming and really a waste of data. 
    Are there available drivers that can be downloaded to remedy this problem, and if so, how can I obtain them?

    "The registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing.  This can happen as a result of installing other CD burning software. Please reinstall."
    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • [Error] Import metadata from interface tables

    Hi all!
    We're trying to update Entity dimension through import profile and we're getting the following error:
    "This member cannot be inserted because the parent member has another child member with the same name" - This happen to all members of dimension.
    Since the members already exist in dimension, the import process should skip them.
    We already checked if there was any issue related with Case Sensitive and there is no issue.
    Hyperion Version: 11.1.1.3
    Anyone can help wit this?
    Regards,
    Luís

    Hi vvipirailo,
    Thanks for your answer.
    Following your tip we've tried to create a new member manually with the same name and we got the same error.
    We can update old member with properties in interface table without any problem.
    Looks like it sees the update as a new member, instead of old member with new properties.
    About the lenght of member name or aliases we don't believe that can be an issue because we only have names and aliases with less than 25 chars.
    Regards,
    Luís

  • Loading dimensions using interface table

    Hello,
    I am trying to load dimensions into EPMA 11.1.1.3 using interface tables and need some direction. I have an accounts dimension file with the following columns ( Parent, Child, Alias, Description, DataType,Aggregation). I configured a data source using configuration wizard (Interface tables).
    I see in the database that some sample tables are created. Now, should I create a separate table with the columns listed above?
    Can someone let me know what are the next steps to successfully import accounts dimension?
    Thanks

    Can someone plz respond?
    This is important for me. I have gone thru' the documentation and also the sample tables but don't understand why are there multiple tables for a particular dimension viz. hierarchy, property etc?
    Please tell me the right way.
    Thanks again!!

  • Import invoices using interface table

    Dear all ,
    I want to import invoice from legacy system to oracle EBS R12 , and i use interface table to import the invoice.
    The problem is when i run Payable open interface import concurrent program to import the invoices , it didn't import any invoices
    and the report output didn't show any error or any data according to the invoices.
    Report output :
    Report Date: 27-JUN-2010 11:25
    Page: 1
    Payables Open Interface Import Report
    Hold Name:
    Source Name: Manual Invoice Entry Hold Reason:
    Group: GL Date:
    Purge: No
    Summarize Report N
    Report Date: 27-JUN-2010 11:25
    Page: 2
    Payables Open Interface Import Report
    Hold Name:
    Source Name: Manual Invoice Entry Hold Reason:
    Group: GL Date:
    Purge: No
    Summarize Report N
    So i go to the db and open the interface table and the status was null ,
    i dont know why????????

    Hi ,
    100% org_id problem Please check. Same i faced after i update the org_id it is working fine and showing the output with inovice and rejection details also
    Thanks
    Venkat

  • How to import order from Interface table using Api Order Import

    Hi All
    I am using oracle EBus R12.
    I was working in Data migration in Order management.
    I have manually entered data in Interface table ie (oe_header_iface_all) and (oe_lines_iface_all)
    And i have given the order_source_id as 2 and order_source as COPY.
    And after that i ran the concurrent program with parameter as COPY but the concurrent program does'nt picks the order in the interface.
    Can any one please tell the steps in OM.
    Thanks & Regards
    Srikkanth.M

    Hi;
    please check:
    http://sureshvaishya.blogspot.com/2009/04/order-import-using-api.html
    Also i suggest see:
    http://irep.oracle.com/index.html
    API User Notes - HTML Format [ID 236937.1]
    R12.0.[3-4] : Oracle Install Base Api / Open Interface Setup Test [ID 427566.1]
    Oracle Trading Community Architecture API User Notes, June 2003 [ID 241320.1]
    Technical Uses of Customer Interface and TCA-API [ID 269121.1]
    http://www.google.com.tr/#hl=tr&source=hp&q=Api+Order+Import+&oq=Api+Order+Import+&aq=f&aqi=&aql=&gs_sm=e&gs_upl=469l469l0l1l1l0l0l0l0l0l0ll0&fp=87c57485fd170fd2&biw=1259&bih=793
    Regard
    Helios

  • Condition class and calculation type missing for conditions downloaded from

    Hi All,
      I have downloaded all the condition types from R/3 using dnl custcndall
    I have even downloaded the following using r3as
    dnl_cust_cnd
    dnl_cust_prc
    dnl_cust_price
    But I have noticed that for the downloaded condition types, condition class and calculation types are missing. Please suggest.

    I have faced the same issue recently.
    The solution is in adapter object DNL_CUST_CNDALL for table T685 and other tables for T685 in that objet put the filters for condition type
    for ex: KSCHL eq PR00
    This sure will work.
    But you have to set this filter for all tables T685*
    Thanks
    Sarabjeet

  • Changing names of mapping target fields for import

    Is there a way to change the names of some of the target fields that are used to map imported lists? Some of the have names like "Person Attribute 1", etc-- we need to make those names more meaningful.

    The answer to your question would be in the oracle implementation guide Appendix D - Oracle Marketing List Import Field Reference
    HTH

Maybe you are looking for