Maps 3.0 bad details on map! help
Hi guys, I have some questions,please help.
How possible is that map of Bosnia and Herzegovina on maps 2.0 is better than 3.0 version?
I have downloaded Bosnia map using maploader 3.0
My 2.0 version have more details and also have all streets in Sarajevo, new version only have most important roads without streets...
any solution?
It is probably down to the map data provider.
In Maps 2.0 Nokia maps used both Navteq and Teleatlas while in Ovi maps (Maps 3.0) they use predominantly Navteq.
At a guess i would say that in 2.0 the map data was Teleatlas while now its Navteq.
Although i work for Nokia, my opinions are my own!
Got a Maps query? Check our Maps FAQ's
Similar Messages
-
XSLT mapping Help Required.
XSLT mapping Help Required.
Hi Experts,
I am New to XSLT Mapping. I am practising the below Example:
InputXML File:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
XSL StyleSheet File:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/Gen"
Xmlns:ns1=”http://XYZ.com/Test”>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(ns0:Mt_XSLT_Source/Person/Address/Houseno,' '),
ns0:Mt_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="ns0:Mt_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
The Desired Output shuold be:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_XSLT_Target xmlns:ns1="http://XYZ.com/Test">
<Title>Male</Title>
<Name>Anshul Chowdhary</Name>
<Street>83/b 2nd Main</Street>
<City>Mysore</City>
</ns1:MT_XSLT_Target>
I have refered the xsl in xml and i am getting the below Oupt in a Single line like this:
Anshul Chowdhary Male 2nd Main 83/b Mysore
I am Unable to display in Target XML Fomrat as shown above. Please check and do the needful.
Regards,
GIRIDHARHi,
I have used below for testing.
Input xml:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
xsl code:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/gen"
xmlns:ns1="http://XYZ.com/Test">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(/ns0:MT_XSLT_Source/Person/Address/Houseno,' '),
/ns0:MT_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="/ns0:MT_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
For testing in PI ,change the extension from .txt to .xsl and zip it and upload into PI as an imported archive .
Regards
Venkat -
Mapping Help for replacing source value
Mapping Help for replacing source value
Posted: Mar 14, 2006 1:06 AM Reply
Hi all,
I am unable to do transform the source value to required target value,
From Source ADDRESS_TYPE = 'HOME' should be replaced with 03 to target field ANSSA, and 'MAIL' to be replaced with 05, I am trying to do it but i am unable to handle it, please give u r valuable suggestions,
The source structure is like this,
- <Event ID="239" TRANS_TYPE="ADR">
<PersAddr GEO_LOC_CD="US" EMPLID="29" ADDRESS_TYPE="HOME" EFFDT="02/15/2006" ADDRESS1="92nd Floor" ADDRESS2="812backstreet" ADDRESS3="" ADDRESS4="" CITY="London" COUNTY="" STATE="AN" POSTAL="EC2N 4AG1" COUNTRY="GBR" KEY1="29" KEY2="HOME" KEY3="02/10/2006" />
<PersAddr GEO_LOC_CD="US" EMPLID="29" ADDRESS_TYPE="MAIL" EFFDT="02/15/2006" ADDRESS1="92nd Floor" ADDRESS2="812backstreet" ADDRESS3="" ADDRESS4="" CITY="London" COUNTY="" STATE="AN" POSTAL="EC2N 4AG1" COUNTRY="GBR" KEY1="29" KEY2="MAIL" KEY3="02/10/2006" />
</Event>
REGARDS,
sridharHi,
This can be done using user-defined function as well.
Code the function as...
if(Addr_Type.equals("HOME"))
return "03";
else if(Addr_Type.equals("MAIL"))
return "05";
else
return "Invalid Address Type";
Here, Addr_Type is Input String Argument for this function.
Map this function between ADDRESS_TYPE and ANSSA.
Regards,
Uma -
hello experts.
the standard functions are not working for the number of occurrences.
below is the structure.
Root 0....unbounded Root 0 ...unbounded.
events 0...unbounded
countries 1...1
total 0....unbounded.
amount 1
totals
Now the condition is.....if countries tag is not available and amount is zero and under total tag we have totals.....if the tag not there.......target side root should not come.
i have done mapping.
countries ----exists-------------------------------------
amount-------
equals-----not------ and--------createif----removecontext-----root.
constant------- and ---------------
(0)
totals --------exist------------
regards,
chinnaHi,
check this mapping help...
it looks both the threads are same.
Regards,
Muni. -
Need Mapping Help: Generate index if value comes
Hi Experts,
I need mapping help to generate index if value comes form source. we have 4 fields in item level of source and target side we have to pass the these filed values and sequence number.
below given the structures:
Source: Target:
Item Item
A1 Text
A2 Seq_No
A3
A4
my requirement is if A1 filed values comes from source we should pass to text and pass seq_no to constant-1, same as A2,A3 and A4 filed values also we should pass to text and seq_no for A2 is 2 and A3 is 3 and A4 is 4. suppose if A1 value is not coming from source we should pass seq_no for A2 is 1. if A1 and A3 filed values are not coming from source then we should pass seq_no for A2 and A3 are 1 and 2.
can you please help me how to achieve this. appreciate for your support.
Regards,
Sanjay.Hi Sanjay,
you can try this mapping
1. Generate the target 4 ITEM's by duplicating the subtree as shown below 3 times.
Now create the each target item starting from first by mapping them to A1,A2,A3 and A4 respectively. I have shown the first ITEM mapping above. similarly you can map A2 to ITEM[1],
A3 to ITEM[2] and A4 to ITEM[3].
2. Now you can map the A* fields to Text one to one as shown below
Please repeat the same for A2,A3 and A4 to respective Text fields.
3.
First seq_no field as shown
and similarly others as shown
Regards
Anupam -
Hi Yann/Vadim,
Facing a problem in BADI can u please help me out...
I am implementing sourcing dashboard.
I am facing problem while implementing the badi BBP_ECS_PO_OUT_BADI in SRM. and BBP_PO_INBOUND_BADI in R3.
i have written following code in BBP_ECS_PO_OUT_BADI in SRM
method IF_EX_BBP_ECS_PO_OUT_BADI~BBP_B46B_PO_OUTBOUND.
data : ls_item type BBP_PDS_PO_ITEM_D.
data : w_customer_fields type BBPS_IF_CUSTOMER_FIELDS_PI.
move 'POITEM' to w_customer_fields-refobject.
move 'CATALOGID' to w_customer_fields-fieldname.
move ls_item-catalogid to w_customer_fields-container.
append w_customer_fields to ct_bapi_customer_fields.
endmethod.
i have created field zsrmcatalogid field in R3 in EKPO table.and i am now implementing the Badi in R3 for BBP_PO_INBOUND_BADI .....in extended classic scenario.
i have written following code in R3 BADI
method IF_EX_BBP_PO_INBOUND_BADI~BBP_MAP_BEFORE_BAPI.
data : wa_customer_fields type bbps_if_customer_fields,
wa_bapi_te_mepoitem type bapi_te_mepoitem,
wa_bapi_te_mepoitemx type bapi_te_mepoitemx,
wa_extensionin type bapiparex.
data : txt_960(960) type c.
read table bbp_customer_fields into wa_customer_fields with key
refobject = 'POITEM' fieldname = 'CATALOGID'.
if sy-subrc eq 0.
move wa_customer_fields-container TO
wa_bapi_te_mepoitem-zsrmcatalogid.
wa_bapi_te_mepoitemx-zsrmcatalogid = 'X'.
endif.
clear txt_960.
clear wa_extensionin.
write wa_bapi_te_mepoitem to txt_960 left-justified.
wa_extensionin-structure = 'BAPI_TE_MEPOITEM'.
wa_extensionin-valuepart1 = txt_960(240).
wa_extensionin-valuepart2 = txt_960+240(240).
wa_extensionin-valuepart3 = txt_960+480(240).
wa_extensionin-valuepart4 = txt_960+720(240).
append wa_extensionin to bapi_extensionin.
clear txt_960.
clear wa_extensionin.
write wa_bapi_te_mepoitemx to txt_960 left-justified.
wa_extensionin-structure = 'BAPI_TE_MEPOITEMX'.
wa_extensionin-valuepart1 = txt_960(240).
wa_extensionin-valuepart2 = txt_960+240(240).
wa_extensionin-valuepart3 = txt_960+480(240).
wa_extensionin-valuepart4 = txt_960+720(240).
append wa_extensionin to bapi_extensionin.
endmethod.
But its not working...
The PO details are not passed from SRM to R3.......
PLEASE CAN U GIVE ME EXACT CODE FOR CHANGES TO BE MADE IN THIS BADI ..AS IT IS NOT WORKING...
Can anybody help me regarding how to debug the BADI in R3.
Thanks in Advance...Hi Ravi,
You can transfer the standard SRM catalog ID field to R/3 tracking number field (if not already used for another purpose) in the R/3 PO.
This will avoid to implement the R/3 inbound bapi.
Here is an extract of the code.
The ECS PO badi example was here used to transfer the unlimited delivery flag to R/3 PO for a Z combination of criteria as well as the transfer of <b>catalog ID</b> to <b>tracking number field</b> in R/3 PO :
method IF_EX_BBP_ECS_PO_OUT_BADI~BBP_B46B_PO_OUTBOUND.
update unlimited delivery flag in R3 PO for combination of vendor +
Product Category maintained in the bespoke table ZUD_PC_VNDR ..
LOOP AT ct_bapi_poitem INTO ls_bapi_poitem.
lv_tabix = sy-tabix.
IF ls_bapi_poitem-po_item IS NOT INITIAL.
READ TABLE it_item INTO ls_item
WITH KEY number_int = ls_bapi_poitem-po_item
del_ind = ' '.
IF sy-subrc = 0.
Set Unlimited delivery Flag
read table li_zud_pc_vndr into ls_zud_pc_vndr
with key partner = ls_partner-PARTNER_ID
category_id = ls_item-category_id.
if sy-subrc eq 0.
ls_bapi_poitem-UNLIMITED_DLV = 'X'.
endif.
Set the Dummy catalog.. entry..
if ls_item-catalogid eq c_dummy.
ls_bapi_poitem-TRACKINGNO = c_noncat.
endif.
ls_bapi_poitem-GR_BASEDIV = ' '.
modify ct_bapi_poitem from ls_bapi_poitem index lv_tabix
transporting UNLIMITED_DLV TRACKINGNO GR_BASEDIV.
ENDIF. "READ TABLE it_item ..
ENDIF. "IF ls_bapi_poitem-po_item ..
ENDLOOP. "LOOP AT ct_bapi_poitem ..
endmethod.
Kind regards,
Yann
PS : please do reward helpful answers )) -
i have my mums payment details on my itunes account, but i bought a £15 itunes voucher today from the shop and put it on my phone.. but it wont let me buy any apps becouse it keeps going to my mums payment details. can someoe help me with this
If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
If you go beyond the credit from a gift card the balance will be billed to your credit card account. -
I want to know that if i want to download facebook on my iphone 4 or any other apps then it ask me put my card details for payment. why is that. if they are free then why do i need to give my card details?please help me anyone.
Just select no credit card as outlined here:
http://support.apple.com/kb/ht2534 -
I have an iphone 4, with ios 4.3.3. I want to update it but when I connect it to itunes it says that it is the latest version of the software. So I cannot update it, and I need it very bad. Can anyone help me?
What version of iTunes do you have installed? If you are trying to update to iOS 6 you need iTunes 10.7 or later.
-
Hello im trying to update my apps and its keep asking me for my bank details can u help me please
Hello im trying to update my apps and its keep asking me for my bank details can u help me please
You need to update your credit card info before you can update your apps.
Accepted form of payment
http://support.apple.com/kb/HT5552 -
Can u give an detail examples or help on SQL- loader
Can u give an detail examples or help on SQL- loader
I need full details on this how to run and what are the pre requirements for this and what
Can u give an example with unix+sql loaderThe Oracle Utilities manual has a chapter on SQL*Loader Case Studies
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch10.htm#1656
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
hi, i am badly in need of help. i partitioned my mac hd yesterday and now the boot camp is nt working as i was using win 7 on it. i am using macbook pro 13'' 2011. plz help me. anxiously waiting for response... specially from "Christopher murphy"
you can't add or mofidy partition numbers. especially not if and once you have windows installed.
boot from Windows 7 DVD afterwards
but first you have to tell us and Christopher what and how you partitioned your system.
Successful setup of OS X Lion + Data Partition + Bootcamp Win7 Ult
https://discussions.apple.com/thread/3293948
So after many, many hours I think I've finally figured out how to successfully setup Mac OS X Lion on one partition, a seperate data partition, and Windows 7 Ultimate on a Bootcamp partition . Here is a screenshot of my setup on my 13" MacBook Pro
Thread with suggestions on Windows backup methods:
https://discussions.apple.com/thread/3798090
Paragon CampTune
Paragon CampTune is a commercial product that is designed expressly for this task. http://www.paragon-software.com/home/camptune/ It consists of a downloadable ISO that needs to be burned to a disc and booted from in order to resize the partitions costs US$19.95.
Securing Dual-System Configuration
Imaging is still the most affordable and robust way to secure computer data. Unfortunately Mac OS X backs up only HFS+ volumes, leaving Windows with dual-system configurations unsecured. You can permanently lose all of your data unless you have a Windows-compatible backup solution.
Paragon’s CampTune and Paragon’s Drive Copy for Mac can secure the entire dual-system configuration. CampTune creates traditional images of volumes or entire hard disks, Drive Copy can copy them to other disks. In case of an emergency, you can restore the previously created image or copy all your data back to its original state.
GParted Live
GParted Live is similar to CampTune as it is also distributed as a bootable image that needs to be copied to a CD/DVD or USB flash drive. As free and open source software, distributed under the GPL, it will always be available free. Since it has more functions than CampTune, it may be harder for folks who are not as experienced with partitioning hard drives. http://gparted.sourceforge.net/
iPartition
Coriolis Systems' iPartition is a £29.95 ($44.95 US) utility that runs in Mac OS X and allows resizing of all of the relevant partition formats, including HFS+, FAT32, and NTFS. It provides a Mac-oriented user interface that may be easier to manage than some of the free utilities. As it is not capable of resizing the boot disk, it requires a bootable external disk or a boot DVD. (A tool to create a boot DVD is included.)
Paragon Partition Manager
From the makes of CampTune is a commercial tool that is similar in functionality to GParted Live, but has a more polished/friendly user interface than GParted Live. Previously only the US$79.95 Professional version supported all the features required for this, but as of version 11 the US$39.95 Personal version has also been reported to work. http://www.paragon-software.com/home/pm-personal/
Winclone/Disk Utility
Winclone is a free tool for creating and restoring backup images of your Windows partition. One of its key features is that it can restore to a larger partition than the one the image was created from.
NOTE: Winclone has been discontinued, but for now remains available and capable of completing these tasks (including creating and restoring Windows 7 images).
Winclone updated to support Lion Winclone updates and download
Disk Utility can resize HFS+ (Mac OS) partitions, but is currently incapable of resizing NTFS partitions, so you could use it to reduce the size of the HFS+ partition and create a new larger placeholder MS-DOS (FAT) partition
The full process would be:
Backup Windows partition with Winclone.
(if the new Windows partition is smaller than the old one make sure you set the preferences in Winclone to save the image as an uncompressed dmg)
Delete old Windows partition
Resize current Mac Partition
Create new Windows partition as MS-DOS (FAT) in free space after Mac OS partition.
(If the new Windows partition is smaller than the old one an additional step is required: shrink the filesystem on the image by selecting Tools->Shrink Windows (NTFS) Filesystem)
Reboot your computer for the new Windows partition to mount properly (winclone may not restore if you don't reboot)
Restore Winclone partition over new Windows partition
An alternate Winclone based process is described in the External Guides section
Native OS utilities
MR user Kazyua reports that you can use the disk management utilities provided with the current operating systems if you want to do it manually. Windows 7 and OS X both have partition resizing functions built in. In OS X, open Disk Utility and manually shrink the mac HFS+ partition by dragging the lower right corner. Then in windows go to the start menu and type "disk management" into the search box then hit enter. You should get an overview of the drives you have and the individual partitions. Right-clicking on the partition gives an "Extend Volume" option. The Windows NTFS volume should then be extended into the free space you created with Disk Utility. This method has not worked for other users, so try at your own risk.
Resizing under VMWare Fusion
If you are looking to allocate more space to Windows under VMWare please refer to the following thread http://forums.macrumors.com/showthread.php?t=828182
From http://guides.macrumors.com/Extend/Resize_Boot_Camp_Partition
Thread with suggestions on Windows backup methods:
https://discussions.apple.com/thread/3798090 -
I have brought ipad 2 from USA to INDIA(32 GB WIFI). I am unable to register with app store using my credit card using india details. Pls help.
You cannot. To open an account on a different iTunes country you must have a valid credit card issued from a bank in that country. You must have a billing address in that country, as well.
There are reasons why some apps are not available in all iTunes stores. -
Hi, anybody can help to point out a blog about how to create multi-mapping with detailed step-by-step and pictures.
I try to learn how to create one.
I read sap help as below, it's too complex to understand , thank you
http://help.sap.com/saphelp_nw04/Helpdata/EN/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htmHi Shiwudao,
In case if you want to merge messages coming from different receivers by using Multimapping .You just need to create Multimapping between abstract interfaces and specify them in the Transformation step,and at the same time you need to take care of the ID objects also.Here u need not use any Enhanced interface determination also.
Refer the Integration process design in following Wiki on BPM Pattern to get an idea on how to use multimapping in BPM transformation step.
https://wiki.sdn.sap.com/wiki/display/BPX/BPMPatternMultiIfconditionExplained(stepbyStep+Procedure).
Thanks,
Ram. -
Hi all,
Please help me in resolving following mapping problem:
I need to post a file to BOMMAT03 IDOC. File structure is parent material # with corresponding child material #s. Again parent with children. Can you help me achieving this in mapping.
Thanks all in advance.Hi,
To create multiple IDOCs based on Parent material # and Child pair do the following(no need to use BPM for this)
1.change Imported IDOC(from r/3 system) occurrences to 0...Unbounded or 1...Unbounded and import modified XSD as external definition
2.use modified IDOC in message mapping
map parent material# node to /BOMMAT03/IDOC node
(This mapping creates number of IDOCs basesed on Parent material#s)
3.normal mapping for rest of the IDOC segments
if you need furthur details please let me know.
cheers,
Jag
Maybe you are looking for
-
I am getting message from MacPro that my start up disc is full - but I can't find this "start up disc" and can't figure out what to do to help situation. I've been making a number of imovies, which generates junk files and material that I should toss
-
Function SO_DOCUMENT_SEND_API1 (substitution-user exit about mails )
Hello Forum, I have to make a substitution (user-exit) for this perform. Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code. And also use code tags. Edited by: Rob Burbank on Jan 18, 2
-
IMac 400 MHz G3 DV - DVD Firmware
Hi, I got hands on a : iMac 400 MHz DV (G3 - M5521) PowerMac2,1 (PowerPC 750) Order No. M7493LL/A* EMC: 1821 DHHS: LA ATI Rage 128VR (2D/3D) AGP 2x (8MB VRAM) Date Oct. 5, 1999 Disc Date July 19, 2000 I already updated the firmware to 4.1.9 and insta
-
What are the stages of a VPN?
in very simple terms I'm trying to get my head round the order of a VPN. We use IPSec and preshared keys, I would just like to know how the order from start to finish on the site-to-site connecting eg phase 1 phase 2 etc
-
[SOLVED] conky + amarok 2 + xfce
Hello! Is there is a way to make conky work with Amarok 2 in Xfce. Scripts for Amarok are using DCOP, but as far as I know, DCOP is working with kde3. So I am looking for a way to enable DCOP in Xfce, either to make Amarok working with Conky in some