Marketplace Adapter and SonicMQ

Hi experts,
I’m trying to configure the XI Marketplace Adapter (MPA) to send JMS messages to a SonicMQ Broker. The only specific SonicMQ configuration requested is the JMS Outbound Queue. I could not figure out how the adapter knows the location/port of the Broker acceptor, username and password, for example. These parameters are not explicit on the adapter configuration. I could not find any useful documentation about this. Can anyone point me any documentation or how can I make this kind of configuration?
Thanks in advance!
Best regards,
Renato Kalman

Hi,
First of all, thanks for your answers! But you all mentioned JMS adapter, which I already got to work but it doesn’t solve my problem. Let me see if I can make it clearer.
I’m working on a project that consists on migrating from a SAP/Commerce One Marketplace EAI solution to a mySAP SRM 5.0 solution, which uses SAP XI as the integration layer. Components from both solutions will coexist during this migration, including SAP XI, SAP Business Connector (BC) and SonicMQ. For this to work, I need to be able to configure XI send and receive messages to SonicMQ in MML format, which is the message format BC expects. That’s why the JMS Adapter doesn’t solve my issue. I read that Marketplace adapter would do exactly what I want but I cannot figure out how to configure it to use the JMS protocol because the only explicit configuration is the Outbound queue.
Thanks again!
Best regards,
Renato Kalman

Similar Messages

  • PLEASE GIVE ME DETAIL INFORMATION ABOUT MARKETPLACE ADAPTER,ONE EXAMPLE ALS

    DETAILED DESCRIPTION ABOUT MARKETPLACE ADAPTER AND ONE EXAMPLE ABOUT THAT

    Hi Sridhar,
    For more information on the Marketplace Adapter and it's feature, go thro' the below link:-
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/ef487f5b680f4c84d632cfe76ec8cb/content.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/b3/30cc3fbeb83946e10000000a114084/content.htm
    Hope this helps.
    Regards.
    Praveen

  • Marketplace adapter issue and question

    Our scenario :
    MarketPlace > XI MML Adapter
    We have the following error :
    No sender agreement configured in the XI Integration Directory for the given message header: SenderParty=OUR_PARTY; ReceiverParty=; SenderService=SERV_MarketplacePartner; ReceiverService=QALCLNT310; Interface=Order; InterfaceNamespace=urn:x-commerceone:document:com:commerceone:XCBL30:XCBL30.sox
    We have used interface with specific names :
    MIOA_Xcbl30PurchaseOrder (namespace : http://my_www.com/xi/B2B/Marketplace)
    So the sender agreement that exist does not use the same interface name and namespace !
    Is it a way to tell the marketplace adapter to use right interface and namespace names ?
    Or I must re-create my interface objects with standard name Order under a standard namespace ???
    Thanks a lot all

    You have to include your interface in the business service and then create the sender agreement.
    As according to error the intreface taken is order instead of your interface.

  • RFC -- XI t-- MarketPlace adapter

    Hello,
    I want to know is it possible to connect
    RFC >XI>Marketplace Adapter.
    My requirement is :
    From R/3  RFC i will send System component Number to XI , from XI i need to connect to
    SAP-Service market place https://websmp205.sap-ag.de/~SAPIDP/002006825000000234912001E
    by giving Userid and password and get the reponse back in XI as latest Support package availabe for that given component..
    So my Sender is RFC Adpater and receiver is Marketplace Adapter also i need to get back the response from Service market place and have to send back to R/3.
    How to do it??
    Also if it is possible ,In IR part what should be my Target message type?
    Regards,
    Mayank

    It would be easier for you to use HTTP adapter to post the request and get the response.
    For understanding Marketplace, have you seen my article?
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20df1696-b87a-2a10-74a6-91949c0c752b
    Regards,
    Prateek

  • Using proxy in marketplace adapter

    Hello,
    We need to use a proxy for connecting with a marketplace system. For
    doing this we use a marketplace adapter, but in this adapter you do not
    have the possibility to set a proxy. For sending the message to the
    marketplace we need to use a HTTPS protocol, which is only available in
    the marketplace and XI adapter, but those adapters do not have the
    possibility of configuring a proxy. For instance the HTTP adapter has
    the possibility of proxy configuration but does not have the HTTPS
    protocol. How could we solve this problem?
    Thanks a lot,
    Luis

    I wonder if you can provide a proxy in here. The documentation for the adapter and the adapter itself doesnt have a proxy configuration in it
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/ef487f5b680f4c84d632cfe76ec8cb/content.htm

  • Target Address for "Marketplace-Adapter" on Marketplace

    Hello,
    we have to use the marketplace-adapter (http and https) to communicate with a marketplace.
    Now we have the problem, which address has to be added on the marketplace-site to send documents to the XI over marketplace-adapter.
    is this address like "http://<host>:<port>/sap/xi/adapter_plain?..." ?
    but which parameter have to be set in this case?
    I didn't find any information about this in the documentation of sap.
    regards,
    thorsten

    Hi Thorsten,
    The url with "adapter_plain" in it is the url to a plain http adapter...it can take parameters as given below...
    however, i am not sure whether this is the url you are looking for ? because this one just passes the payload on to the integration server....it does not do any conversion where as for the message from the market place, the format has to be converted from MML to XI specific format...right?
    i am also trying to search and find the url for accessing the sender market place channel...
    anyways....the parameters for an http adapter are...
    http://hostname:port/path
                         ?namespace=???
                         &interface=???
                         &service=???
                         &party=???
                         &agency=???
                         &scheme=???
                         [&qos= EO|BE|EOIO]
                         [&msgguid=???]
                         [&queueid=???]
                         [&trace=[1|2|3]]
    Thanks,
    Renjith

  • SAP Marketplace Adapter

    I apologize if this is not the correct forum for this, but all I'm trying to find out is whether the SAP Marketplace Adapter (when used with PI) is able to output xCBL 3.5 and/or 3.0 documents inside MML envelopes, as well as receive and consume xCBL documents inside MML.

    Hi,
      The Marketplace Adapter sends MML document. The content of this MML are made through mapping programs, for instance, if you have a purchase scenario like this: SAP MM -> PI -> Marketplace, you could send an ORDER Idoc to SAP PI, SAP PI make the IDOC transformation to xCbl 3.5 and finally you send this data to marketplace through Marketplace Adapter (MML Format).
       The receiver scenario can use xCbl structure as well.
       The marketplace adapter only create the MML document.
       SAP Business Connector was a better tool for Marketplace communication than SAP PI.
    Regards
    Ivá

  • Marketplace adapter Multiple DDID Issue

    We have two customers whom we have to send messages to. Both of them use marketplace adapters and they would want our R/3 system to send the messages with 2 different DDIDs. Is this possible?
    I checked the option of using party to differentiate our R/3 system according to the party to add two different IDs to the R/3 business system, but since our R/3 system is a LS system, the message does not get detected as if it is coming from a party.
    Has anybody faced this issue? How have you solved this situation.
    Thanks for your replies!

    hi,
    >>>>If so, could you show us how to manage the DDID issue?
    put the DDID number in DDID field of adapter specific identifiers
    where?
    - open your business system/service
    - service from menu 
    - adapter specific identifiers
    - DDID field
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Marketplace Adapter, how to set recipient IDu00B4s for vendors

    Dear SDN Community,
    currently we use SAP BusinesswConnector/MarketSet Connector for Marketplace communication and have plans to migrate to SAP XI/Marketplace Adapter. I cannot find any place in the Marketplace Adapter where to put the recipient ID´s (MPID) for our vendors.
    XI allows to define only one DDID per each service, but to create per each vendor a service makes no sense.
    Is there a way to put the MPID or DDID dynamically during runtime into the MML header ?
    Any hints ot ideas are appreciated.
    Thanks and regards,
    Holger Baumann

    Hi Holger,
    >>>>>>>Do I have to setup one partner or per each vendor/MPID a partner ?
    Yes.
    >>>>>>>Which values do I have to put in the fields agency, schema and name in idenfifiers tab ?
    In case of Vendor Number for R/3, you have to specify the fields as shown below.
    Agency: BS_SR5( Business System for backend R/3)
    Schema: ALE#<Partner type>#<Partner function>(For example:ALE#LI#LF>
    Name: 0001004000(Vendor Number in the Backend R/3)
    Hope this helps.
    Regards,
    Sam Raju

  • Problem with Marketplace Adapter

    Hi,
    when we send an ORDER-document from marketplace to xi over marketplace-adapter, we get the following error:
    <i>Couldn't retrieve inbound binding for the given P/S/A values:FP=XYZ;TP=;FS=EDC_200;TS=AV4_200;AN=ORDER;ANS=;</i>
    We have a party "XYZ" with the service "EDC_200" and we have a service "AV4_200" without party and a service "ORDER".
    Does anyone know why this error-message appears and how we can solve this problem?
    Regards
    Thorsten

    Hi Sam,
    here the entries we have used for our SA:
    Sender:
    Paty: XYZ
    Service: EDC_200
    Interface: ORDER
    Namespace: http://test.com/xi/pc1
    Receiver:
    Party:
    Service: AV4_200
    sender Communication Channel: Marketplace_Sender
    Here the configuration of the communication channel:
    Party: XYZ
    Service: EDC_200
    Transport-Protocol: HTTP
    Message-Protocol: MML
    Regards,
    Thorsten

  • Apple Mini-DVI to Video Adapter and Mac mini (2009)

    Can anyone tell me whether the Apple Mini-DVI to Video Adapter listed here:
    http://store.apple.com/ca/product/M9319G/A
    works with the latest Mac mini (early 2009)?
    If it does not what other solutions are there to connect to composite, component or s-video?

    KC from Ann Arbor, MI had this to say as a review on the page to which you have linked;
    10-May-2009
    I bought a Mac Mini (May 2009) and this Mini-DVI to Video adapter with plans to use it to send an S-video signal to an analog TV. Though the sales staff at the Apple store said it should work, it does not. The graphics card apparently should support it, and it may be addressed with a future driver update, but as of now this does not work. I have used a mini-DVI to VGA adapter and monitor to verify that the port is working, and also verified that the S-video cable and TV input work. There are third party VGA to S-video/RCA adapters available so I plan to use one of those for my purposes. This is probably a 5-star product when used with the right Mac; however, Apple should have made it clear that having a mini-DVI port on your Mac is necessary but not sufficient for this to work - hence the 3 stars.

  • I have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this

    i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks

    sos1der wrote:
    pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
    You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
    sos1der wrote:
    but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
    That's an entirely different issue, unrelated to your iOS devices.

  • I have a late 2008 white macbook.  I have a mini dvi to hdmi adapter, and a hdmi cord.  My cannot get my MB to detect an external monitor.  Nothing happens when plugged in.  Also, my display settings does not have an option for mirroring or arrangment tab

    I have a late 2008 white macbook.  I have a mini dvi to hdmi adapter, and a hdmi cord.  My cannot get my MB to detect an external monitor.  Nothing happens when plugged in.  Also, my display settings does not have an option for mirroring or arrangment tab

    Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!

  • HT4108 I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?

    I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?

    If this is an iPad 1, it won't mirror, but it will still output video from the 30 Pin dock connector.
    If your new TV has a conventional VGA in and stereo inputs you can try this connector.
    http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a
    I used to stream video from both Netflix and YouTube and from my Mac using iTunes sharing through my iPad then with this connector plug into my iPad and TV.
    It won't be high resolution, but it will get you picture from iPad to TV.
    Good Luck.

  • I've just hooked my 20" iMac up to my Toshiba 37" HDTV using a mini dvi-HDMI adapter, and works well, EXCEPT for the green tinge (or hue) that is showing up on my TV. Any suggestions or ideas?

    I've just hooked my 20" iMac display up to my Toshiba 37" HDTV using a mini dvi-HDMI adapter, and everything works well, EXCEPT for the green tinge (or hue) that is showing up. Everything else looks pretty good though..... The color that is on my iMac is still good, Its just green on the TV.
    Anyone have suggestions or ideas?

    Try opening the Display System Preferences, then click on the Color options in the Display preferences window that appeared on the Toshiba display. Click on the Calibrate button and follow the instructions for creating a custom ColorSync profile that will hopefully solve the green tinge issue. The Apple Display Calibrator Assistant software that launches when you click on the calibrate button will walk you through the process.Assuming that the green tinge is minor and that you don't have a more serious cable or hardware issue, I am hopeful the results will be worth it.

Maybe you are looking for

  • Find keyword in XML file from an array of keywords

    Hi, I have an array of collection of keyword: $KeyWord = @("Fail","Exception","Terminated","Error") I want to check in a textfile sample.xml, if any or all keywords from the array $KeyWord exist. If any of the keyword exist in the textfile, a boolean

  • ITunes won't open - wordless error message

    When I try to open itunes, I get a wordless error message that only shows a red octagon behind the itunes application symbol. The only option is to click 'OK'. Any ideas what this is and how to deal with it? I haven't used itunes in a few weeks, so I

  • Signature in Script

    HI Experts, How to add signature in Script. Reagrds, Sreedhar.

  • Require a query with all clauses

    Hi All, I have been asked for a query to write by using all sql clauses like group by, where, having, order by in a single query. I just wrote the below query but I did not get out put. Please do correct where I am missing. select deptno, max(sal) fr

  • AVI2 Create error: Acces denied.

    Dear all, For my research project on a fusion device I've dug into Labview to automize my measurements. Allthough I'm a novice in Labview the program is working as required, except for one part. There is a webcam involved which monitors the inside of