Master - Detail -- How to Hide page if no detail records

I'm hoping to be able to hide a page if no detail records exist for the master query.
My master query:
"Company" and "account" and balances for each account
(balances carry forward from previous months)
Detail Query:
transactions for each account for a month
-- Linked to the master by "account-id"
The master query is grouped into 2 parts:
a) Company
b) account and balance
Sometimes an account won't have any transactions during the month (especially if the report is run at the beginning of the month)
If I create a "summary" count field in the "account" group based on the transactions, then I can hide (not print) the "account" frame.
But I can't figure out how to do this for the "company" frame.
I'm probably missing something simple (or maybe not)
Any suggestions?
Thanks,
Eric

So basically you are showing each account on a separate page?
Move the objects shown in Company repeating frame to the account repeating frame. In this case company repeating frame will be blank. And your already created format trigger to hide account frame will work for both (company+account). So whenever any account is zero, it will hide all objects within the frame. Parent frame doesn’t contain any objects, it would not show the parent frame for that account. Make sure vertically elasticity of the frame is variable.
Hope this helps.

Similar Messages

How to hide page number in the table of content

Hi,
I'd like to know how to hide page number in the ToC. They show automatically, but at least for the headings of third ad fourth order I'd like to suppress/omit them.
Thanks for any advice!

You have in the Inpspector > Document tab > TOC > uncheck button for #'s

Master-details records

Hi Everybody,
i have a requirement to show master detail records.to show data i have 3 tables
they are 1) Flat_Master(flat_id,flat_desc,pic)
2)Flat_Detail(flat_id,flat_face_id,flat_loc)
3)face_tab(face_id,face_desc)
in my jsf page i displayed flat_master as master records and flat_detail as detail records
here flat_detail is updatable.so for flat_face_id i created a lov choice list based on face_tab table(ADF BC level).
so when master record i changed, my choice list is not getting changed amd even when page load also for the first record also it is not selecting..
How can i set this choice list value programatically based on master records?
Any ideas can you please share with me?
thanks
KM.
Edited by: Mr. Murali on Sep 13, 2011 3:21 AM

pls provide me the detailed view.,
what ur trying to say and wat s ur use case?

Master-Details Record

I have a Master and two details records. I need to generate report for the Master-Details record.
I need to include some details from the Master table and some details from each of the detail tables.
For example :
In Master table: Employee_Number
Employee_Name
Company_Code
Company_Name
In Application Detail table: Application_Code
Application_Name
In Non-Application Details table: Non-Application_Code
Non-Application_Name
I need to include Employee_Name, Company_Name, Application_Name and Non-Application_Name in my report. How should I go about creating the report?and may I know what type of report style should I use?Should I use Tabular or Group Above?
Thank for your help

hello,
you might want to start off with a regular master detail layout and then modify the layout manually to fit your needs.
when running throught he wizard, you just select whichever fields you want to display.
regards,
the oracle reports team --pw

Using EJB creating Master/Detail Record

Hi All
I would really in need of your help regarding how to show the information of master detail records in a single form
eg: one text field with department Id and a Search button which should give relevent employees details working in that particular department.
I tried with ADF business components it works fine..
I need to do through pure Session Beans and Entity Beans(note : not thru using EJB:UseBean Tag)
Please i will really appreciate your valuable help..
Thanks All
Have a Nice day
Mohamed Anez

Kunal:
Use a code snippet like the following:
--- Assuming you're in the detail EO's create method ---
oracle.jbo.server.EntityDefImpl eDef = oracle.jbo.server.EntityDefImpl.findDefObject(<package-qualified-name-of-the-master-Entity-Object>);
oracle.jbo.Row masterRow = eDef.findByPrimaryKey(this.getDBTransaction(), <foreign-key>);
If the row does not exist, masterRow will be null.
findByPrimaryKey first checks the entity cache (which will include your new master row(s)) and then go out to database (if it's not in cache).
Thanks.
Sung

What is the proper way to record line numbers in Master/Detail records?

Guys and Gals,
Been thinking about this for awhile, but thought it best to ask the people who really know what they are doing.
What is the proper way to record & show line numbers in a Master / Detail record set?
For example, take Master/Detail relationship Orders and OrderItems. Orders has a column Document_Number and OrderItems has Document_Number, Line_Number. Line_Number should contain the row number 1,2,3,4 ... etc. for each row in a document.
Should I ...
<ol><li>Add a sequence and a trigger in the database? The FusionOrderDemo does this, but then the sequence never "resets" and I've got row numbers that keep incrementing. So one document has rows 4,5,6 and the next document has 7,8,9 when they should both have 1,2,3.</li>
<li>Programmatically take care of the row numbers? This seems like I'm asking for trouble. Anytime an insert or delete operation gets done, I'll have to iterate through rows and re-assign row numbers.</li>
<li>Is there a way to assign row numbers in a table iterator (or data collection?) to an entity?</li></ol>
Any suggestions would be appreciated. It's looking like #2 is my only option, but if anyone knows different I'd love the input.
Will

Thank you both guys.
As John said, I believe I'm looking for a gap-free sequence per master record.
The line number of the OrderItems table is the second half of the primary key. The first half of the primary key (DocumentNumber) is the foreign key to the Orders table.
Think of it like line items on an order or invoice. For example, if you were talking to someone on the phone concerning an invoice, you might say, "The pricing for line item #3 is incorrect." In this case, it's good to have a common reference. Or imagine a Microsoft Excel spreadsheet with no row numbers displayed! You'd never get anywhere if you had to explain something over the phone.
If this is tricky to perform, I take it using a sequence and trigger such as the Fusion Order Demo is the best way to approach the challenge for simplicity's sake?
Will

Foreign key validation while creating master/detail record in document mode

I am creating master/detail records in the document mode. And I am generating the master primary key in the create() method of the master Entity Object. Now I valdate the foreign key in the detail Entity Object's validateEntity() method by doing a query to the master table through some View Object.
But since the master record has not yet been posted (since it hasn't been committed) to the database, this query does not return any record and the validation fails in detail object.
And thus the create fails.
Please let me know if this is the right approach for doing this. If so where I am going wrong? Else please let me know if there are any better approach to do this.
Kunal

Kunal:
Use a code snippet like the following:
--- Assuming you're in the detail EO's create method ---
oracle.jbo.server.EntityDefImpl eDef = oracle.jbo.server.EntityDefImpl.findDefObject(<package-qualified-name-of-the-master-Entity-Object>);
oracle.jbo.Row masterRow = eDef.findByPrimaryKey(this.getDBTransaction(), <foreign-key>);
If the row does not exist, masterRow will be null.
findByPrimaryKey first checks the entity cache (which will include your new master row(s)) and then go out to database (if it's not in cache).
Thanks.
Sung

Generate file with a master-detail records

Hi everyone,
I need your help, one more time.
I want to generate a file in ODI that have two distincts records of the detail, a master-detail records. The first one record contain general data and second one contains a second level information about the previous.
I got the result using a bad solution, loading the file line by line, but the file is so large and performace was very slow.
The expected result is:
001Purchase Order id 99
002Item 1
002Item 2
001Purchase Order id 150
002Item 1
002Item 3
001Purchase Order id 4870
002Item 3
Anyone has an alternative for that?
regards.

hello
i belive you need to use pivot operator
check out this blog
https://blogs.oracle.com/warehousebuilder/entry/pivoting_data_in_owb
rgds

How to hide pages in reports when no data on it?

hello,
i have a master detail report,which has data on the master without data in the detail,so how can i hide pages which has no data on its detail?
Thanks.

Put the following In the format trigger of the repeating frame:
return :cs_cnt > 0;
Here cs_cnt is the summary column counting details per master.

How to hide pages in forms

Hello Everyone!
I have a form that is three pages long.
I need to find a way to hide pages 2 and 3 until they are needed. ie. status is selected from a drop down which makes page 2 necessary.
Any advice on the matter is appreciated.
Thank you.

You can use templates for this, but be aware that they won't work with Reader unless your users are using Reader 11, and they won't work if you Reader-enable the document with Acrobat. They actually can work with previous versions of Reader, but only if you Reader-enable with LiveCycle Reader Extensions, which is rather expensive.
If you can deal with these limitations and need more help, post again. It will involve some JavaScript, so it will be useful for you to get the Acrobat JavaScript reference that's included in the free Acrobat SDK.

Sample code to edit master detail records

Hi,
Could anybody please sned me the sample code to edit master and detail records.
Thanks,
Kavitha

Arjuna,
Thanks for your reply. Unfortunately the 'switcher' code which makes an attribute editable, works on a 'Read-Only table' page but not on 'Master-Detail table' page. The switcher code is:
<switcher childName="${uix.current.RowID.inputValue == bindings.RowID.inputValue ? 'selected' : 'notselected'}">
<case name="selected">
<textInput model="${bindings.RequestedBudget}" columns="14" readOnly="false"/>
</case>
<case name="notselected">
<textInput model="${uix.current.RequestedBudget}" columns="10" readOnly="true"/>
</case>
</switcher>
We do have individual bindings for all table attributes. Any suggestions will be much appreciated.
Thanks, Ali.

BC4J - Inserting Master/Detail records in same transaction.

I know this is possible, but I seem to be missing something to allow it to happen within BC4J.
I'm creating a RowSet off of a View Object and inserting new Rows into this RowSet. This RowSet represents my child/detail records for insert into a child table.
I then create a new Row off of another View Object. This row represents my Master/parent record for insert into a parent table.
All of the above is being done in the same applicationModule transaction with locking mode set to Optimistic.
Before I commit the transaction, I grab the next sequence # to use as the primary key for the master record and the foreign key for the child records. I apply those to the newly created child rows and the newly created master row.
However, when I commit I continue to get a JBO-26041: Failed to post data to database during "Insert": error due to ORA-02291: integrity constraint (CUST_LICENSES_FK4) violated - parent key not found
If everything was created in the same transaction, why won't this allow me to insert into both tables with the correct primary/foreign keys? It's almost as if the child records are being inserted first prior to the parent record.
Any ideas?
Thanks in advance..
Teri Kemple
TUSC
[email protected]

However, when I commit I continue to get a JBO-26041: Failed to post data to database during "Insert": error due to ORA-02291: integrity constraint (CUST_LICENSES_FK4) violated - parent key not found
If everything was created in the same transaction, why won't this allow me to insert into both tables with the correct primary/foreign keys? It's almost as if the child records are being inserted first prior to the parent record.This is due to the order of rows being posted. In this case it seems the detail row is getting posted before the master.
To avoid such situations, either you may implement your own post ordering by making sure that when a detail is to
be inserted, it's master is inserted or you may use "Composition Association" flag in the association wizard between
the master and the detail entities to let the framework manage a tight composition relationship between the two entity
types. BTW, there was another definitive thread recently on inserting master-detail in the
same transaction, but the forum search engine is so useless I can't find it. Anyone
have the msgid handy or know how to find that thread again??
FYI: the help describes the Composition flag functionality in terms of the Master record already existing in the DB. In our problem here, the Master is being inserted in the same transaction. Thus needs to be posted FIRST.
I got a integrity constraint exception too, then set the composition flag and now I get:
500 Internal Server Error
oracle.jbo.InvalidOwnerException: JBO-25030: Failed to find or invalidate owning entity.
     void oracle.jbo.server.EntityImpl.create(oracle.jbo.AttributeList)
     void gov.ga.gdc.otf.bc.JotfWithdrawalsImpl.create(oracle.jbo.AttributeList)
     void oracle.jbo.server.ViewRowStorage.create(oracle.jbo.AttributeList)
     void oracle.jbo.server.ViewRowImpl.create(oracle.jbo.AttributeList)
     oracle.jbo.server.ViewRowImpl oracle.jbo.server.ViewObjectImpl.createInstance(oracle.jbo.server.ViewRowSetImpl, oracle.jbo.AttributeList)
     oracle.jbo.server.RowImpl oracle.jbo.server.QueryCollection.createRowWithEntities(int[], oracle.jbo.server.EntityImpl[], oracle.jbo.server.ViewRowSetImpl, oracle.jbo.AttributeList)
     oracle.jbo.Row oracle.jbo.server.ViewRowSetImpl.createRowWithEntities(int[], oracle.jbo.server.EntityImpl[], oracle.jbo.AttributeList)
     oracle.jbo.Row oracle.jbo.server.ViewRowSetImpl.createRow()
     oracle.jbo.Row oracle.jbo.server.ViewObjectImpl.createRow()
     void gov.ga.gdc.otf.appmodule.JOtfOffenderAppModuleImpl.insertWithdrawal(java.lang.String, java.lang.String, java.math.BigDecimal, oracle.jbo.domain.Number, java.lang.Integer, int)
     void gov.ga.gdc.otf.appmodule.JOtfOffenderAppModuleImpl.payOneObligation(java.lang.String, java.lang.String, java.lang.Integer, oracle.jbo.domain.Number, java.math.BigDecimal, int)
     void gov.ga.gdc.otf.appmodule.JOtfOffenderAppModuleImpl.payObligations(java.lang.String, java.lang.String, java.math.BigDecimal, oracle.jbo.domain.Number)
     void gov.ga.gdc.otf.appmodule.JOtfOffenderAppModuleImpl.receiveFunds(java.lang.String, java.lang.String, int, java.math.BigDecimal, java.lang.String, java.lang.String, java.lang.String, java.math.BigDecimal, long)TIA much! curt

Copying master detail records in oracle forms

Hi,
Have a master details block , using a copy button i copy the existing contents
in both the blocks , than primary key and foreign key value of the both blocks are changed and i want to save it as a new record.
Problem is when i do the above it goes to record status as update
it is not doing insert with the values.and throwing an error wrt referential integrity
pls help
with thanks

This forum focuses on EBS. For Form specific questions, you can try Forms

When viewing a spread, how to hide page divider

When viewing a two-page spread, how do you hide the page divider? See attached screen shot.

Have you considered setting your preferences to put the Guides in Back so that objects will obscure the unwanted (but helpful IMO) page
guide?
Note: the frame is over the middle of a 2 page spread and has a fill set to [paper]. With the preference disabled (default), the page guide shows through. With it enabled (pictured above), the object fill masks the guide. If the guide truly bothers you, you can set a large frame filled with [paper] swatch across the spread and lock it in positions to prevent edits.
Not ideal to me, but everyone has their own idea of what works for them.
-mt
Message was edited by: MT.Freelance

How to Hide page in interactive form

Hello All,
I have developed the Interactive form for one of the HR process. Form is pread across the three pages.
My requirment is to hide the second page based on some condition. I have tried JAVA script to hide the page using below syntax but its not working.
if ($record.CARRID.value == "AA") { this.presence = "invisible";}
Am i missing something? Help needed... Thanks
Regards,
Sagar

Hi Sagar,
Wrap all the UI elements that you want to hide inside a subform. Then try the following script in the initialize event of the subform.
if (this.CARRID.rawValue == "AA") { this.presence = "hidden";}
Thanks & Regards,
Sanoosh

Master - Detail -- How to Hide page if no detail records

Similar Messages

Maybe you are looking for