Mat doc cancellation date is prior to po date

suppose my po date is 10.04.2007
GR date or Mat doc date is 10.04.2007
But doc cancellation date with ref to purchase date is prior to 10.04.2007 (09.04.2007)
how it can be possible and how can we stop this?
thanks

Hi
IT0045 config depends on the requirement of the client and mapping of it.
Please go thru the document for reference .. it is very explanatory.
http://help.sap.com/printdocu/core/print46c/en/data/pdf/PYINT/PYSOME_LOAN.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/HRINF/HRINF.pdf
R K

Similar Messages

Restrict creation of Service Entry Sheet if the Date is Prior to PO Date

Hi,
I need to restrict from posting a Service Entry Sheet whose Document date and Posting Date are Prior to the Document date of a Puchase Order...Can any one please suggest...
Regards,
Sabita

Hi,
Better to go release streatgy in SES Release. Give the right of revoke to some other as per business.
also
make the error in
Application Area SE , system msg 155 Not possible to cancel release with code & as error
Restrict the user with release Code and release Grp in M_SRV
Regards,
Pardeep Malik

Mat document cancellation date is before then po date and gr date

suppose my po date is 10.04.2007
GR date or Mat doc date is 10.04.2007
But doc cancellation date with ref to purchase date is prior to 10.04.2007 (09.04.2007)
how it can be possible and how can we stop this?
thanks

To avoid this kind of situation make the filed GOHEAD-BUDAT is display in the OMJX transcaiton then system will take the defualt date is todays date.

Posting date from CRM Billing doc cancellation

hello,
I have an issue in the CRM billing documents transferred from CRM to ECC. When do a biling doc, the document and posting are taken from the document date in CRM billing document.
But when I do a cancellation of the billing document, the document date is taken from the document date in CRM, however the posting date is taken from the Value date in CRM. We have made some exits in CRM billing where the value date is determined as document date + 5 days.
I am not sure why the cancellation takes place on the value date. Can anyone here please explain and also tell how this can be made as billing document.
thanks in advance,
jigar

SB,
Have a look at user-exit USEREXIT_MOVE_FIELD_TO_VBKD in include MV45AFZZ
PeteA

Billing doc cancelled

Dear Friends,
We are facing a major issue which is as follows:
A bill doc was cancelled. The doc flow of the original billing doc shows:
Delivery (Archived)-> Sale Invoice (Completed)-> A/cing doc (Not Cleared)
The cancelled doc is not coming in the above doc flow. What can be the reason that cancelled doc is not coming in the doc flow?
On the other hand the doc flow of the Cancelled doc shows:
Delivery (Same as above) (Status Archived)->Cancel Inv (S1) Status- Missing export data. (Transaction is domestic). Here also the original bill doc is not coming in the doc flow of S1. However the original doc is coming in the Assignment field in the header of S1. Again what can be the reason? We also want to clear the A/cing doc of the original Billing document. How is this possible?
Is there any T.Code for displaying J1ID?
Plz hep to solve these issues.
Thank you very much.

Go to VA03, key in the sale order reference and check the document flow. Let me know whether you could see the original billing document that was cancelled. If not, check in copy control whether you have ticked the box "Update document flow".
Is there any T.Code for displaying J1ID?
What do you mean by this ?? J1ID itself is a standard TCode.
thanks
G. Lakshmipathi

TDP / SD - error- posting value missing in mat doc

Hi experts,
Please help...
I have two excise duty conditions ya02 and ya03 and they stand for excise duty value calculated via rate from OIH01 table and other is calculated based on the reduction % entered during delivery document respectively. So ya03 is zero initially when teh order is created, until a % reduction is entered in the delivery document and from their a User exist calculates the reduction value and populates the ya03 condition type.
Till here it is fine now when the PGI is done the value for ya02 is visible but ya03 is missing. Debugging shows that the system is looking for the value in OIH01 table. and when ED rate is maintained the value for ya03 is populated in the mat doc.
1. Is their any user exit which can bypass this and pick up the value calculated in the condition type ya03?
2. Any other suggested solution?
regards,
Vineet

Entire material GR stock should be in storage location,before proceeding to next step.
After cancelling invoice,Cancel material document,Post excise using J1IEX,Cancel excise using J1IEX.
Now do necessary changes in p.o. Do GR,invoice.
Edited by: Jeyakanthan A on Feb 24, 2011 8:50 PM

While mat .doc archiving error

Hi
While mat .doc archiving i am getting error can not be archived due to Document
not completed.
How to find what are all the documents and how to correct the same ?
Thanks
Regards,
Dhinesh

Dear,
Please go through the below:
Archiving (transaction SARA)
Data archiving removes bulk data which is no longer required in the System, but which must be retained accessibly, from the database. Data in the R/3 database can only be archived via archiving objects, which describe the data structure. Financial accounting documents, for example are archived via the archiving object FI_DOCUMNT, which comprises the document header, company-code-dependent postings, change documents, SAPscript texts and other elements. The application archiving objects are pre-defined in the system. The archiving programs are scheduled as background jobs, but can run during on-line processing. The system need not be shutdown.
The archiving procedure comprises two main steps:
Create archive files: the data to be archived are first written sequentially into a newly created file. The data then exist twice in the database. These archive files can, e.g. be passed to an archive system, via ArchiveLink.
Execute delete program: the data in the archive files are removed from the database by the delete program.
You can check how the archive filenames and archive destination are setup in transaction FILE
Always remembers to check the setting before any archiving. The settings will determine things like whether the delete programs will start automatically. (it is not advisable to start your delete programs automatically).
You can configure all the customizing settings with transaction AOBJ - Archive Objects.
MM_MATBEL - Archive material document
OMB9 - Archiving - Material document retention period.
The default documents life is 200 days. You need to maintain the documents life for each Plant in your company before you can start archiving. If you did not maintain, you will get a list with 'Valid.period not maintained for tr./ev. type of doc.'.
MM_ACCTIT - Archive accounting interface tables
The documents store in the table are for applications which are to be supplied with the posting data at a later date of MM Inventory Management and MM Invoice Verification.
If you are using 3.x, this archiving object might not be found. You need to import it from sapservX. Read note 89324, 99388, 83076.
Take a look at OSS note 48009 for the detail explanation of which data is updated in the ACCT* tables.
PP_ORDER - Archive production order
OPJH - Production Order retention period. Maintain Retention 1 and 2.
If your set your retention 1 and 2 as 10, that means that after 10 days of setting the delete flag then you can set the deletion indicator. After 10 days of setting the deletion indicator then you can start archiving. Therefore, to archive immediately, you can leave retention 1 and 2 as space. Please take note that retention 1 and 2 act as a safety net if you happened to archive the wrong record. You will have to decide whether to have the retention time gap or not.
FI_DOCUMNT - Archive Financial Accounting Documents
Maintain the account life - transaction OBR7
Maintain the documents life - transaction OBR8
SD_VBRK - Archive Billing Documents
There are no posting date or fiscal year/period selection. You can only specify the billing documents date. In order that you do not archive the wrong record, you have to write a ABAP query or report to print out the various billing documents number ranges you want to archive. You can extract the data from table
VBRK - Billing: Header Data.
VN01 - Check all the number ranges for Billing Documents.
Click Overview buttom or Hold the Shift key and press F7.
RV_LIKP - Archiving Deliveries
VORL - Maintain the retention period. Number of days which must have elapsed since the delivery was created, before the delivery can be archived.
VLAL - Archive deliveries
Regards,
Syed Hussain.

Want to know the Mat docs for the stock in trans qty in MARD

Hi Experts,
I found 10 qty in stock in transfer(sloc) in MARD table for a material. I want to know what are all the material docuements posted against them descretely?
Because:
when I am doing the MB1B with movement type 313 for that material, the qty is appending on the existing qty, not knowing the details when and how much qty have been posted with in MARD.
when I am using MSEG to fetch the Material documents posted with 313 movement type for that material. its showing so many material documents with 313 for that material docs for more qty.
My questions is stock in transfer(sloc) qty should be equal to Mat docs with qty.
Please help me to find the descretely.
Thanks
Srinvas

Thanks for reply Kumar,
Actually I have generated a report for pulling Mat docs which have been posted with 313 mov type by ignoring the corresponding docs with 314 and 315 using MARD and MSEG. I will use these Mat docs in further transaction like MBSU.
Now my report is pulling all the mat docs with 313 for a particular material & plant combination when I am executing without any date range.
But when I campare the Material in stock in trans (sloc) qty is 3 in MARD(for example), but my report is showing documents with more qty. (7 mat docs with total of 10 qty for ex.). causing the data incosistency.
Can you please help me in pulling the Material documents related to the stock in trans(sloc) qty only?
Thanks
srini

Goods Receipt Collective Slip for Mat Doc is not printing

HI All,
I have a strange issues. I'm trying to print collective slip for Goods Receipt which is created against of PO.
I able to print Individual Slip when i create GR(Mat Doc) against PO with movement type 101. But I'm not able to print the Collective Slip when I create GR(Mat Doc) against PO with movement type 101. I'm saving the GR document by selecting collective slip. Error I'm getting is "The system could not create Output".
I check the condition records in MN21, condition record is in place.
I check in OMB5, for movement type and material document configuratio its there.
I check in NACR, condition record is there.
I found that In table NAST, entry for GR document created using collective slip is not available, but Individual slip GR Doc entries are there in NAST table.
any help on this matter is highly appreciated.
I check in SDN, Googled it, but no result.
Thanks in Advance.

check this
2. Before you set up the output determination, you have to run the program RM07NCUS for each client in which you want to use the output determination function.
This program copies the basic settings from the SAP standard client (000).
from there:
http://help.sap.com/saphelp_46c/helpdata/en/ed/6cec6eb435d1118b3f0060b03ca329/content.htm
and check you have define some printer for the output.

Want to schedule WebI report for End date of Prior Month

Hello Experts,
We have WebI report created on top of Bex Query, We have key date as prompt for the report. Can we schedule the webi report for key date as last date of prior month, so if current month is February, my key date should be Jan 30 2011. I am not sure if this is possible?
Thanks,
Ravi

You need to apply two FM to get the end day of the month.
First you need to apply FM MONTHS_PLUS_DETERMINE. This will give you the date after 3 months.
            CALL FUNCTION 'MONTH_PLUS_DETERMINE'
              EXPORTING
                MONTHS        = 3   " << for 3 months
                OLDDATE       = l_start_Date   " << 12/01/2007
             IMPORTING
               NEWDATE       = l_3_Date. " << 02/01/2008
Then call the FM RP_LAST_DAY_OF_MONTHS . this will give you the end date of the month
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
    EXPORTING
      day_in            = l_3_Date " << 02/01/2008
    IMPORTING
      last_day_of_month = l_3_Date " < 02/29/2008
    EXCEPTIONS
      day_in_no_date    = 1
      OTHERS            = 2.
Call both FMs again to get your another date(after 4 months).
Regards,
Naimesh Patel

CURRENT YEAR SALES DATE PARAMATER AND PRIOR YEAR SAME DATE RANGE

I am pulling data from a SQL view dbo.view that has current and historical SOP data by line. The date paramater is a date range, uppr date and lower date formulas are in the report. I need to include prior year SOP data for the same prior year date range in the detail. I have tried adding the view in twice with no luck, just duplications. Ultimately I want to supress the detail and only show the totals by customer so it is comparitive. Thanks for your help. Jayne

OK
lets simplify it
get a test data source with some simple dates in it.
get the report logic working.
it looks like you have the right formula ideas but lets go for
@upperthisyear
@upperlastyear
@lowerthisyear
@lowerlastyear
then assuming a date field of {table1.date}
the record selection would be
if (@upperthisyeare > {table1.date} and @lowerthisyear < {table1.date}) or (@upperlastyeare > {table1.date} and @lowerlastyear < {table1.date}) then 1 else 0
I would test this by using it as a formula field with the test data.

How can i open a DOC or TXT file and insert the data into table?

How can i open a DOC or TXT file and insert the data into table?
I have a doc file . the doc include some columns and some rows.(for example 'ID,Name,Date,...').
I'd like open DOC file and I'd like insert them into the table with same columns.
Thanks.

Use the SQL*Loader utility or the UTL_FILE package.

I lost my Visual Voicemail when upgrading to iphone 5. New phone was set up from itunes backup of iphone4 but my Mac tells me there is an iCloud back up of my phone prior to this date. Will my Vis Voicemail be on this and can I get it on my new phone?

I lost my Visual Voicemail when upgrading to iphone 5. New phone was set up from itunes backup of iphone4 but my Mac tells me there is an iCloud back up of my phone prior to this date. Will my Vis Voicemail be on this and can I get it on my new phone?

I see. Apple's documentation on what is included in the iCloud backup doesn't explicitly say that it contains voicemails, but that doesn't mean it does not. You would just have to try restoring the backup to find out.
To restore to your iCoud backup you have to start by erasing the phone. Go to Settings>General>Reset and tap Erase All Content and Settings. Then go through the setup screens on the phone and when given the option, choose Restore from iCloud backup. You will then sign into your iCloud account, accept the terms and conditions, then choose the backup you wish to restore from. To see an older backup, you may need to tap "Show older backups" (see image below). Be sure your phone is connected to wifi and your charger as this may take some time to finish.
If this does not recover your voicemails, you can check to see if you have an older iTunes backup that may contain them. Available backups are shown in iTunes Preferences>Devices on the Backups list.
If all else fails, you could try contacting your carrier. Voicemail is a carrier feature and they may have an archive you could access.

How to change a date to sunday prior to any date

Hi All,
I have a requirement to change a date to sunday prior to any date. for example,
If date is 6/30/08 , then i need to change it to 6/29/08. If date is 6/26/08, then i need to change it to 6/22/08.
How to do the same.
Regards,
Neha

Hi ,
i think u can use this FM
GET_WEEK_INFO_BASED_ON_DATE
Import parameters               Value
DATE                            26.06.2008
Export parameters               Value
WEEK                            200826
MONDAY                          23.06.2008
SUNDAY                          29.06.2008
by using this FM u will get Starting date of that week will come , in this case 23/06, so u need to code like this
last sunday = mmonday - 1.
regards
Prabhu

Date LOVs prior to 1970

It appears that date values prior to 1970 are not supported in prompt LOVs.
To test this, I created a universe (unv) with a object having a date value of 5/1/1970 through 5/1/2020. I then created a report with a prompt on this object. When I attempt to refresh the report in REST, I get the following response:
<lov searchable="true" refreshable="true" partial="false" hierarchical="false">
<id>UNIVERSELOV_DS0.DO4</id>
<updated>2014-12-29T09:47:38.000-05:00</updated>
<intervals>
<interval id="0">
<value/>
<value/>
</interval>
<interval id="1">
<value/>
<value>2001-04-30T20:00:00.000-04:00</value>
</interval>
<interval id="2">
<value>2002-04-30T20:00:00.000-04:00</value>
<value>2020-04-30T20:00:00.000-04:00</value>
</interval>
</intervals>
<values>
<value/>
<value/>
<value/>
<value/>
All of the "<value/>" rows represent a date prior to 1970. Note that this is occurring in interval ranges as well as values. When I request all the values in a single interval, the problem becomes more apparent:
<parameters>
    <parameter dpId="DP0" type="prompt" optional="false">
        <id>0</id>
        <technicalName>Enter value(s) for THEDATE</technicalName>
        <name>Enter value(s) for THEDATE</name>
        <answer type="DateTime" constrained="false">
            <info cardinality="Multiple">
                <lov searchable="true" refreshable="true" partial="false" hierarchical="false">
                    <id>UNIVERSELOV_DS0.DO4</id>
                    <updated>2014-12-29T09:48:20.000-05:00</updated>
                    <values>
                        <value/>
                        <value/>
                        <value/>
                       (multiple identical rows removed)
                        <value/>
                        <value/>
                        <value/>
                        <value/>
                        <value/>
                        <value>1970-04-30T20:00:00.000-04:00</value>
                        <value>1971-04-30T20:00:00.000-04:00</value>
                        <value>1972-04-30T20:00:00.000-04:00</value>
                        <value>1973-04-30T20:00:00.000-04:00</value>
                        <value>1974-04-30T20:00:00.000-04:00</value>
                        <value>1975-04-30T20:00:00.000-04:00</value>
                        (years 1976-2015 removed)
                        <value>2016-04-30T20:00:00.000-04:00</value>
                        <value>2017-04-30T20:00:00.000-04:00</value>
                        <value>2018-04-30T20:00:00.000-04:00</value>
                        <value>2019-04-30T20:00:00.000-04:00</value>
                        <value>2020-04-30T20:00:00.000-04:00</value>
                    </values>
                    <columns mappingId="0">
                        <column type="DateTime" id="0">THEDATE </column>
                    </columns>
                </lov>
            </info>
        </answer>
    </parameter>
</parameters>
Is this a bug, or intentional behavior?

hi Joe and Anthony,
... and happy new year!
Looking at the code, there is a bug on our (aka Raylight) side, for sure, oops!
(Just to know: does it work well with BI LaunchPad?)
Thanks,
eric

Mat doc cancellation date is prior to po date

Similar Messages

Maybe you are looking for