Matchcode Object for fiels STRAS in SANS1

Hello All,
The table SANS1 conatims the field STRAS for street for 35 charcaters
and STRAS_MC as the matchcode object for this field which is of 16 characters in upper case.
I want to create a search help. Its working fine with STRAS_MC but with only 16 chacters search
and doesn't works with field STRAS. I found a note 547538 but that is for version 4.7.
I want some solution for this in 5.0 server.
Please give your inputs on this.
Sumit.

Hi,
You can try the following are the search helps (matchcode objects) available for ORGEH (Org Unit).
HRBAS00OBJID
RESP_ORG_UNIT
H_T527X Help View for Organizational Units
H_T527X_1 Seach help for T527X
Regards,
Suresh Datti

Similar Messages

Matchcode Object for ORGEH field in Selection-Screen

Hi,
   I need to create a Matchcode Object for ORGEH field in my Selection-Screen. But, I want to have the selection Criteria as the Tcode: Po10 does. Please guide me how to do it. Is there any Standard Matchcode Object provided by SAP for this kind of functionality?. Please provide some kind of solution. I am in urgent need of this.
Thanks in advance,
Exertive.

Hi,
You can try the following are the search helps (matchcode objects) available for ORGEH (Org Unit).
HRBAS00OBJID
RESP_ORG_UNIT
H_T527X                          Help View for Organizational Units
H_T527X_1                        Seach help for T527X
Regards,
Suresh Datti

FieldStrings, field-symbols and matchcode objects

Hi,
Can u explain and give 1 example of each....
1. fieldstring
2. fieldsymbol
3. matchcode object.
Thanks,
Nidhi

FIELD-SYMBOLS . Its first component is assigned to the field symbol. GET REFERENCE is then used to get a reference to the second component not the structured data object in dref2. It is dereferenced without casting.
Ref link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
https://forums.sdn.sap.com/click.jspa?searchID=-1&messageID=3068811
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
Matchcodes are defined in two stages in Abap/4 Dictionary:
1) The revelant table and fields are stipulated in matchcode object. A matchcode object describes the set of all possible search paths for a search item.
2) One or more matchcode ID can be defined for a matchcode object. A matchcode ID describes a special search path for a search term.The fields or combination of fields via which the search is to take place is defined in the matchcode ID.
Matchcodes are replaced by SEARCH HELPs in latest versions
see the doc
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=2176485
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=3601619
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
Search Help Exits:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee52446011d189700000e8322d00/content.htm
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_exit.htm
https://forums.sdn.sap.com/click.jspa?searchID=4390517&messageID=1712818
Collective search help Combine several elementary search helps. A collective search help thus can offer several alternative search paths.
A Collective search help provides alternative search
Paths by combining elementary search helps.
Only one search help can be attached to a field, table or data element. Several search paths are therefore attached with a collective search help.
A collective search help also has interface parameters like
an elementary search help.
Like an elementary search help, a collective search help has an interface of IMPORT and EXPORT parameters with which the search help exchanges data. Using this interface, the collective search help can be attached to fields, tables and data elements exactly like an elementary search help.
Parameter assignment needs to be done for each of the
Included search helps.
When you define a collective search help, there are no components for describing the dialog behavior and data selection; instead the included search helps are listed here. You must assign the parameters of the collective search help to the interface parameters of the included search help for each inclusion.
User may choose the tab and thus the elementary
search maethod.
When we execute the search help SCUSTOM, we are confronted with a dialog which gives us an option of either restricting
By 1)Search for customer according to booking
2)Search for customer according to name.
These are effectively the elementary search helps (SCUSTOM_BOOK and SCUSTOM_NAME) which have been included in the collective search help SCUSTOM.
HOT KEY
The hot key is used to select the elementary search help from the collective search help and to enter the restrictions in the dialog box for restricting values directly from the entry field. If the user often searches for values using the same search help, this procedure can save time.
Steps to create a Collective Search Help
1)Enter the search help name and click on create.
2)Choose Collective search help radio button option as the search help type.
3)Enter the search help parameters.
4)Instead of the selection method, we enter the included
search helps for the collective search help.
5)We need to assign parameters for each of the included
search helps.
6)Complete the parameter assignment by clicking on the push button
7)Collective search help offers the user to obtain F4 help
using any of the included search helps.
Field string is nothing but the group of fields
You can call it as Structure also
example:
types: begin of x_str
kunnr type kunnr,
lifnr type lifnr,
name1 type name1,
land1 type land1,
end of x_str.
this stores one record at run time.
Reward points,
shakir

Regarding Matchcode object in ABAP programs

hi experts,
we have Addon abap programs using Matchcode objects in R3 4.6C with OS unix.
1-I Would like to know whether the Sorting order of Match code values will change if we change OS from UNIX to solaris.
I heard that due to Locales, Sorting order for match code likely to get affected due to OS dependencies.
Please suggest me if its true how to solve this prob
Thanks.
Baasha.

Who tells you that??? The OS has nothing to do with the sort of match code values....Maybe but don't think so....Different DB Engines could make that.....But in my experience....That never happened...
Greetings,
Blag.

Search help,F4 function& matchcode object , give difference

hi guru
i confuse about this 3 functionlity.
search help,F4 function& matchcode object ,
please tell me the differences.
regards.
subhasis.

Hi,
Search Help
Use
With this function you can search for objects, thereby defining and linking different selection conditions for the search help.
Prerequisites
You can call this function by:
· Selecting Object ® Search... () in the main menu bar of the Integration Builder
· Placing the cursor on a software component version and selecting Search... () in the context menu (only in the Integration Repository)
In this case the software component version is defined as the search criteria.
Features
Defining the Object Type
You can select the object type in a dropdown list in field Object Type.
In the design (Integration Repository) you can
· Select an object type (for example Message Interface)
· Select a cross-object category (for example Interface Objects)
In the configuration (Integration Directory) you can select types Values Mapping Group and schema in addition to the individual object types.
CHECK THIS LINK TO CREATE A SEARCH HELP.
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_basic.htm
CHECK THIS LINK TO CREATE A MATCHCODE OBJECT
http://searchsap.techtarget.com/tip/1,289483,sid21_gci553386,00.html
more details...
Regards,
Priyanka.

What is matchcode objects and how can we create tthem

hai to all.
     what is matchcode objects .
     and how can we create matchcode objects
     and how will it works

Hi
In which version of SAP are you working?
Matchcodes are replaced by SEARCH HELPs in latest versions
see the doc
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=2176485
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=3601619
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee52446011d189700000e8322d00/content.htm
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_exit.htm
https://forums.sdn.sap.com/click.jspa?searchID=4390517&messageID=1712818
Collective search help Combine several elementary search helps. A collective search help thus can offer several alternative search paths.
A Collective search help provides alternative search
Paths by combining elementary search helps.
Only one search help can be attached to a field, table or data element. Several search paths are therefore attached with a collective search help.
A collective search help also has interface parameters like
an elementary search help.
Like an elementary search help, a collective search help has an interface of IMPORT and EXPORT parameters with which the search help exchanges data. Using this interface, the collective search help can be attached to fields, tables and data elements exactly like an elementary search help.
Parameter assignment needs to be done for each of the
Included search helps.
When you define a collective search help, there are no components for describing the dialog behavior and data selection; instead the included search helps are listed here. You must assign the parameters of the collective search help to the interface parameters of the included search help for each inclusion.
User may choose the tab and thus the elementary
search maethod.
When we execute the search help SCUSTOM, we are confronted with a dialog which gives us an option of either restricting
By 1)Search for customer according to booking
2)Search for customer according to name.
These are effectively the elementary search helps (SCUSTOM_BOOK and SCUSTOM_NAME) which have been included in the collective search help SCUSTOM.
HOT KEY
The hot key is used to select the elementary search help from the collective search help and to enter the restrictions in the dialog box for restricting values directly from the entry field. If the user often searches for values using the same search help, this procedure can save time.
Steps to create a Collective Search Help
1)Enter the search help name and click on create.
2)Choose Collective search help radio button option as the search help type.
3)Enter the search help parameters.
4)Instead of the selection method, we enter the included
search helps for the collective search help.
5)We need to assign parameters for each of the included
search helps.
6)Complete the parameter assignment by clicking on the push button
7)Collective search help offers the user to obtain F4 help
using any of the included search helps.

Matchcode object i_status_sys and i_status_usr

Hi guys,
I need help regarding matchcode object.
I copied a program from earlier version of SAP (R/3) to ECC6.
In that program there is a selection screen field with matchcode object i_status_sys and i_status_usr. I have tried this in R/3 and it works fine, but it doesn't work in ECC6.
Anybody knows the new version of i_status_sys and i_status_usr?
Thanks!
Sam.

ok. I ran into this same problem. I guess SAP has hard-coded inside the search help 'I_STATUS' the programs that can call it. So if you want your 'Z' program to use this search help 'I_STATUS', you have to do some memory setup to tell the search help it's ok if my program "reuses" you. I know it is weird.
So enter these three line in your initilization event in your 'Z' program.
DATA: p_obtyp TYPE j_obtyp.
p_obtyp = 'IEQ'.
EXPORT p_obtyp TO MEMORY ID 'PM_OBTYP'.
Magic? Maybe, but this solved the problem for me.

How to convert matchcode objects to searchhelps.

Hi,
I had created search helps before but,
We have a project in which we have matchcode objects. The client wants us to create
searchhelps for those matchcode objects with the same name
I am not getting how to convert matchcode objects to searchhelps.
Regards,
sarath.

pick the object name and hit them in se11 search help row... that is a search help...
parameter: p type x-x matchcode object <object_name>

Matchcode object doesnt work in production while in development it does.???

Dear Sir/Madam,
I take opportunity to thank you guys from the bottom of my heart as i usually get answer or direction
towards solution beacause of kind attitude.
ou
Now lets come to a real scenario.
There is one match code object attached with select-option parameter.. which working very find in
Development serever but it in production server it doesnt.
When i made debugging i come to know that actually match code object name is not being passed ahead in production server while in development server it does.. i am understanding this strange behaviour of system..
So would thankful to you if you guys let me know about the solution or even hint for a way..
Thanks & Regards,
Parekh Nirav

Dear,
Thanks for your reply and showing interest in my question.
code is given below :
SELECT-OPTIONS CODE FOR YICHLOC-CODE MATCHCODE OBJECT YICH_SHLOC.
And it is as shown that its a customized match code object.
With Regards,
Parekh Nirav

Finding matchcode object help

how to find matchcode object of a field which is already exizted in se11.
for eg. i want to find matchcode object of a field Parnr from table IHPA.
regds

Hi,
PARNR from IHPA doesn't associated with any search help/match code.
YOU can find two ways whether a search help is associated with a field .
1.SE11->Table->IHPA->Click on Entry Help/Check -> select the field(PARNR) click on Search help button, if a search help is available it will display.
2.SE11->DataType->PARNR(display)->Click on Further Characterstics tab-> here you can see the search help associated with it.
Hope This Info Helps YOU.
Regards,
Raghav

How to get the connected Adapter Object for a particular BDoc Type?

Hi All,
I have a scenario in which CRM system is connected to ERP system.
In SMW01 transaction, I can see one BDoc with BUS_TRANS_MSG as the BDoc Type in CRM.
Now, how do I get to know if this one BDoc is a SALESDOCUMENT or SALESCONTRACT.
Is there any way thorough which I can get to know the Adapter Object for this particular BDoc.
Regards,
Madhuri

Hi Madhuri,
Happy new year.
In Transaction : R3AC1.
You can observe the Linked BDOC for the adaptor objects. For example Sales docuemnt and Sales contrcat will have the same linked BDOC as "BUS_TRANS_MSG".
If you see an error in SMW01, you want to find whether it is salesdocument or contract.
1. Please take the Queue name from SMW01.
from the queue name you can find whether it is sales contract or sales document.
Queue name is customized in tables: SMOFQFIND.
I hope this helps you.
regards,
Sri...

How to add the Match code object for the requisitioner field in TCODE ME51N

Hi,
How to add the search help (Match code object) for the requisitioner field in transaction ME51N.
Please do the needful to me.
Regards
Rajesh

don't you think that posting your question to a microsoft developer site would be more efficient?
regards,
anton

Creating Activity object for a Service Request object...

[This thread was migrated from the On Demand Developer Forum in the old Siebel Community] 
drangineni
New Contributor
Ho do we use Activity object of a Service Request object. I am trying to
create an Activity object for a existing Service Request object.
I am looking for some sample code.
I greatly appreciate your help.
Product: CRM OnDemand
11-26-2006 12:40 PM
Re: Creating Activity object for a Service Request object...
BigSlick
Valued Contributor
drangineni, What programming language are you using?
BS
12-04-2006 10:56 AM
Re: Creating Activity object for a Service Request object...
drangineni
New Contributor
Hi, I am using C# .
12-04-2006 07:40 PM
Re: Creating Activity object for a Service Request object...
BigSlick
Valued Contributor
drangineni, assuming you know the service requestid or externalId of the
Sr you are dealin gwith you would first set that value.
ServiceRequest1[] objSRList =new ServiceRequest1[1];
objSRList[0] = new ServiceRequest1();
objSRList[0].ServiceRequestId = <YourSRId>;
Then you create an array of activities and initialize the first one:
objSRList[0].ListOfActivity = new Activity[1];
objSRList[0].ListOfActivity[0] = new Activity();
Now set the data fields
objSRList[0].ListOfActivity[0].Subject ="My Subject";
objSRList[0].ListOfActivity[0].Description ="My Description";
objSRList[0].ListOfActivity[0].Display = "Task"; //valid values are either
"Task" or "Appointment"
Then call the ServiceREquestInsertOrUpdate method on the ServiceRequest
WebService and pass in the above variable.
BS
12-06-2006 12:36 PM
Re: Creating Activity object for a Service Request object...
drangineni
New Contributor
Thank you BigSlick.
The following error is thrown when I use the
ServiceRequestInsertOrUpdate(objInput)
"No user key can be used for the Integration Component instance 'Service 
Request_Action'.(SBL-EAI-04397)"
When I use the prxySrvcRequest.ServiceRequestInsert(objInput), no error is
thrown and the Activity gets added, but a new Service Request object is
created, but the Activity gets added to an existing Service Request
object. I greatly appreciate your help.
The following is the code:
int ActivityLength = 0;
WSOD_ServiceRequest.ServiceRequest1[] ServiceRequest = new
WSOD_ServiceRequest.ServiceRequest1[1];
ServiceRequest[0] = new WSOD_ServiceRequest.ServiceRequest1();
ServiceRequest[0].ServiceRequestId = this.Request.QueryString["id"];
ServiceRequest[0].ListOfActivity = new
WebSelfService.WSOD_ServiceRequest.Activity[ActivityLength + 1];
ServiceRequest[0].ListOfActivity[0] = new WSOD_ServiceRequest.Activity();
ServiceRequest[0].ListOfActivity[ActivityLength].Description =
this.txtDescription.Text;
ServiceRequest[0].ListOfActivity[ActivityLength].Display = "Task";
ServiceRequest[0].ListOfActivity[ActivityLength].Subject = "My Subject";
WSOD_ServiceRequest.ServiceRequest prxySrvcRequest = new
WebSelfService.WSOD_ServiceRequest.ServiceRequest();
WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Input
objInput = new
WebSelfService.WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Input();
WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Output
objOutput = new
WebSelfService.WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Output();
objInput.ListOfServiceRequest = ServiceRequest;
Session objSession;
objSession = (Session) Application["Session"];
prxySrvcRequest.Url = objSession.GetURL();
try
objOutput = prxySrvcRequest.ServiceRequestInsertOrUpdate(objInput);
catch(Exception e)
12-09-2006 09:53 AM
Re: Creating Activity object for a Service Request object...
drangineni
New Contributor
Thank you BigSlick.
The following error is thrown when I use the
ServiceRequestInsertOrUpdate(objInput)
"No user key can be used for the Integration Component instance 'Service 
Request_Action'.(SBL-EAI-04397)"
When I use the prxySrvcRequest.ServiceRequestInsert(objInput), no error is
thrown and the Activity gets added, but a new Service Request object is
created, but the Activity gets added to an existing Service Request
object. I greatly appreciate your help.
The following is the code:
int ActivityLength = 0;
WSOD_ServiceRequest.ServiceRequest1[] ServiceRequest = new
WSOD_ServiceRequest.ServiceRequest1[1];
ServiceRequest[0] = new WSOD_ServiceRequest.ServiceRequest1();
ServiceRequest[0].ServiceRequestId = this.Request.QueryString["id"];
ServiceRequest[0].ListOfActivity = new
WebSelfService.WSOD_ServiceRequest.Activity[ActivityLength + 1];
ServiceRequest[0].ListOfActivity[0] = new WSOD_ServiceRequest.Activity();
ServiceRequest[0].ListOfActivity[ActivityLength].Description =
this.txtDescription.Text;
ServiceRequest[0].ListOfActivity[ActivityLength].Display = "Task";
ServiceRequest[0].ListOfActivity[ActivityLength].Subject = "My Subject";
WSOD_ServiceRequest.ServiceRequest prxySrvcRequest = new
WebSelfService.WSOD_ServiceRequest.ServiceRequest();
WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Input
objInput = new
WebSelfService.WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Input();
WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Output
objOutput = new
WebSelfService.WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Output();
objInput.ListOfServiceRequest = ServiceRequest;
Session objSession;
objSession = (Session) Application["Session"];
prxySrvcRequest.Url = objSession.GetURL();
try
objOutput = prxySrvcRequest.ServiceRequestInsertOrUpdate(objInput);
catch(Exception e)
12-10-2006 08:49 AM
Re: Creating Activity object for a Service Request object...
BigSlick
Valued Contributor
Ah yes, I forgot you also need to specify a unquie Id for the activity.
It's kinda strange.
Try adding this:
ServiceRequest[0].ListOfActivity[ActivityLength].ActivityId = "DummyId";
//OD will overwrite this with a real Id
Or if you have a unquie ID for your Activities you can use:
ServiceRequest[0].ListOfActivity[ActivityLength].ExternalSystemId = <Your
Unique Value>;
Hope that helps,
BS
12-11-2006 10:52 AM
Re: Creating Activity object for a Service Request object...
surgientweb
New Contributor
Hi all,
I have a similar problem, but mine is returning a message that field
"Display" is required. Looking at this post and the documentation it is
obvious that Display is a required field, but my WSDL did not include a
field called "Display", so my proxy did not generate one.
I tried adding a field called Display to the WSDL and the proxy class, but
I get a different error... I figure I maybe cannot add it manually like
that - but I think the bigger problem is it is not part of the WSDL that
Siebel OD generates for me in my admin account.
On top of that Display is not shown in the list of fields for Activity
through the admin interface.. is it possible my account is bugged? Am I
missing something simple here? BigSlick, I see you mention a .Display in
your code sample so I thought you might understand what is wrong. Here is
my code (I am trying to add a activity to a lead).
Thanks for any insight into this!
private void InsertLeadActivity(Session session, NameValueCollection data,
string leadID)
try
if (blnDebug)
Response.Write("Setting up Activity ";
// instantiate the proxy service
Activity_Service.Activity activityProxy = new Activity_Service.Activity();
// set up the target URL
activityProxy.Url = session.GetURL();
activityProxy.CookieContainer = session.GetCookieContainer();
// set up input argument
ActivityNWS_Activity_Insert_Input input = new
ActivityNWS_Activity_Insert_Input();
input.ListOfActivity = new Activity1[1];
input.ListOfActivity[0] = new Activity1();
if (blnDebug)
Response.Write("Getting Data ";
// dg note: name value
// input.ListOfActivity[0].MrMrs = data["MrMrs"];
input.ListOfActivity[0].LeadId = leadID.ToString();
input.ListOfActivity[0].Description = DataToString(data);
input.ListOfActivity[0].Subject = "Website Submission Activity";
input.ListOfActivity[0].Priority = "3-Low";
//input.ListOfActivity[0].DueDate =
DateTime.Now.AddDays(7).ToShortDateString();
input.ListOfActivity[0].Owner = this.defaultLeadOwner;
input.ListOfActivity[0].Type = "Call";
//input.ListOfActivity[0].Display = "Task";
input.ListOfActivity[0].ActivityId = "DummyId";
input.ListOfActivity[0].ExternalSystemId = "web";
activityProxy.Activity_Insert(input);
catch (Exception exInsertActivity1)
if (blnDebug)
Response.Write(" Error inserting activity. " +
exInsertActivity1.ToString() + " ";
01-06-2007 05:05 PM
Re: Creating Activity object for a Service Request object...
surgientweb
New Contributor
Figured it out.. the field "Display" is also known as "Activity"........
Here are some notes for other people.. good luck and feel free to write me
at raskawa-at-gmail-com if you want a code sample.
Some unpublished nice to knows for Siebel On Demand Activities....
In summary:
- .Activity is also known as Display in documentation and on the error
messages coming back from the WS. Also, it appears based on these boards
some people actually have a .Display field. Maybe different accounts
generate different WSDL's.... buggy.
- If a error message is thrown saying "Description is required" it really
means "Subject is required" (make sure .Subject has a value)
- If a error message is thrown complaining that ActionType is not right..
that is really .Type.. make sure it's lookup value is valid for the
dropdown values in your CRM OD system.
My code/values that worked..
input.ListOfActivity[0].LeadId = leadID.ToString();
input.ListOfActivity[0].Description = DataToString(data);
input.ListOfActivity[0].Subject = "Website Submission Activity";
input.ListOfActivity[0].Priority = "3-Low";
//input.ListOfActivity[0].DueDate =
DateTime.Now.AddDays(7).ToShortDateString();
input.ListOfActivity[0].Owner = this.defaultLeadOwner;
input.ListOfActivity[0].Type = "Call";
input.ListOfActivity[0].ActivityId = "DummyId";
input.ListOfActivity[0].ExternalSystemId = "web";
//input.ListOfActivity[0].Display = "Task"; //doesn't work
input.ListOfActivity[0].Activity = "Task"; //does work.
01-06-2007 05:17 PM
Re: Creating Activity object for a Service Request object...
raskawa
First Time Contributor
Hi,
This is surgientweb (under my own login now..)
Anyway, I wanted to add that I figured out that there are two ways to add
a Activity to a Lead. Via the Lead object (by getting a ListOfActivities)
OR by creating a Activity directly and just adding your "LeadID" to it (or
you can also add a "ContactID" to relate the activity to a Contact.)
Feel free to email me for a code example (raskawa....at....gmail)
-David
01-09-2007 02:58 PM

Hi Stephane,
You can definitely read the categories using Tables in CRM. The logic is a bit complicated though.
Use the following steps to retrieve Categories using Std. CRM Tables:
1. Pass transaction GUID in field GUID of table CRMV_REPORT_SUBJ and get KATALOGART, CODEGRUPPE and CODE field values in lv_catalog, lv_codegrp and lv_code.
2. Now you need to concatenate these 3 fields values carefully like this:
CONCATENATE lv_catelog lv_codegrp ' ' lv_code into lv_category1.
Remember there are 4 spaces between lv_codegrp and lv_code.
3. Now pass this lv_category1 in field OBJEXT in table CRMC_ERMS_CAT_OK and get OBJGUID in field lv_objguid.
4. Pass this lv_objguid in field OBJ_GUID and LNK_TYPE = 'IS_CODE' in table CRMC_ERMS_CAT_LN and get value of CAT_GUID in lv_cat_guid.
5. Pass this lv_cat_guid in field CAT_GUID in table CRMC_ERMS_CAT_CA and get value of CAT_ID in field lv_cat_text.
Remember this lv_cat_text is the text value of your last level of category of transaction.
6. To get its upper cateogry level value, simply use table CRMC_ERMS_CAT_HI and get parent guid value and pass this as CAT_GUID again in table CRMC_ERMS_CAT_CA to get its text.
Alternatively, you can also use class method cl_crm_ml_category_util=>get_parse_all to get all levels of categories.
Hope this helps.
Thanks
Vishal

How to activate all inactive objects for current user

Hi
How to activate all inactive objects for current user ...
... I have found a (long winded) way to do this:
- Environment / Inactive Objects
- Add to Worklist
- Display Worklist
- Select All
- Activate
this will open a dialog titled "Inactive Objects for <username>"
which has the exact functionality I need ... but I can't figure out how to get to this dialog directly - without so many intermediate steps
the SAP docs repeatedly mention the ability to activate the inactive worklist - but do not mention how
does anybody know the TCode for this dialog?
thanks
ps does the term "mass activation" apply to importing change requests rather than development activation?
Edited by: FireBean500 on Jun 4, 2010 11:07 PM

No other way. But usually it's far more simple as all objects are already in our own worklist.
I wonder why your objects are not already in your worklist, as everytime you create or maintain an object, it is added to your worklist.

How to convert an array collection instance to a complex object for interaction with webservice

Hi there,
I have a stubborn problem that I am trying to work out the best way to solve the problem. I am interacting with a WebService via HTTPService calling a method called find(String name) and this returns me a List of ComplexObjects that contain general string and int params and also lists of other Complex Objects. Now using the code:
ArrayCollection newOriginalResultsArray = new ArrayCollection(event.result as Array)
flex converts my complex objects results to an arraycollection so that I can use it in datagrids etc. Now up until this part is all good. My problem is when getting a single instance from the results list, updating it by moving data around in a new datagrid for example - I want to interact with the webservice again to do an create/update. This is where I am having problems - because these webservice methods require the complex object as a parameter - I am struggling to understand how I can convert the array collection instance back to my complex object without iterating over it and casting it back (maybe this is the only way - but I am hoping not).
I am hoping that there is a simple solution that I am missing and that there is some smart cookie out there that could provide me with an answer - or at least somewhere to start looking. I guess if I have no other alternative - maybe I need to get the people who built the service to change it to accept an array - and let them do the conversion.
Any help would be greatly appreciated.
Bert

Hi Bert,
According to my knowledge you can use describeType(Object) method which will return an XML... That XML will contain Properties and values just iterate through the XML and create a new Object.. Probably u can use this method...
public function getObject(reqObj:Object,obj:Object,instanceName:String,name:String=null,index:int=-1):Obj ect
 if(!reqObj)
 reqObj = new Object();
 var classInfo:XML = describeType(obj);
 var className:String = instanceName;
 if(name!=null)
 className=name+"."+className;
 if(index!=-1)
 className=className+"["+index+"]";
 for each (var v:XML in classInfo..accessor)
 var attributeName:String=v.@name;
 var value:* = obj[attributeName]
 var type:String = v.@type;
 if(!value)
 reqObj[className+"."+attributeName] = value;
 else if(type == "mx.collections::ArrayCollection")
 for(var i:int=0;i<value.length;i++)
 var temp:Object=value.getItemAt(i);
 getReqObject(reqObj,temp,attributeName,className,i);
 else if(type == "String" || type == "Number" || type == "int" || type == "Boolean")
 reqObj[ className+"."+attributeName] = value;
 else if (type == "Object")
 for (var p:String in value)
 reqObj[ className+"."+attributeName+"."+p] = value[p];
 else
 getReqObject(reqObj,value,attributeName,className);
 return reqObj;
Thanks,
Pradeep

Matchcode Object for fiels STRAS in SANS1

Similar Messages

Maybe you are looking for