Material Price updation through Material Ledger

Hi,
I implemented the ML and after executing the ML Costing run & on 1st movement of material( Dynamic price release) the The Per Unit price* which is calculated in ML costing run is not updating in the current std price area in Costing View 2 Tab.
I think the previous periods( for which I did ML Costing Run) Per unit price has to update in the Current planned price in Costing View 2. Instead of this , the std planned price of previous period only updating in the "future Planned price".
Please explain how to get the Previous period Moving price in Current Planned price in Costing View 2.
T & R,
C.Balaji

Hi,
I did CK11N & CK24 in Feb for example, and the price updated in current std cost estimate.
after month end closing I did CKMLCP, I heard that after completing all the sequence of oparations, The actual cost incurred for the material will update in Perunit price and Price controle will become from S to V, and we can get the Moving avarage price of Feb will become the Std price for the March month.
This is not happening , How we can get this Moving Avarage price of Feb month as a Std current price in March month.
Pls inform wether it is possible or not, if possible what is the method to get.
T & R,
C.Balaji

Similar Messages

Transfer Price capturing through material ledger

Hi
Would like to know how can we capture Transfer price mechanism through Material ledger.And what should be taken care of while activating material ledger.
regards

Hi,
Transfer pricing is taken care using Speicial procurement key as similar as Product cost planning.
The very important activities involved with ML while implementing are:
1. Conversion from pricing control V to S, if we dicide to go with S for rawmaterial.
2. Month end activities. This has to be done with out miss. Other wise, there will be a problem in closing the past period.
Vijay

Material Master Update through BAPI - Follow up material not updated

Hi Experts,
I am updating the material master through a custom transaction using the BAPI 'BAPI_MATERIAL_SAVEDATA'. Rest of the fields are updating correctly except for discontinuation ind., effective out date & follow-up material.
When I try to update it through MM02 it is working fine. However, when I pass the same data through BAPI it is throwing an error message that 'the material XXXXXX does not exist or is not activated'.
Please advice.
Thanks & Regards,
Ashu Arora

Some more fields need to be updated along with the discont. indicator. Now working fine.

Price updation in Material Master after confirmation

Dear Gurus,
When we create a production order for Semi finished which is maintained with Moving Average Price(MAP) in material master and we do confirmation of the order with "CO15'.
My client wants after goods receipts against 101 movement type the price should be up date in Material; Master immediately.
Regards
RAM

Hi,
I think this cant be done.
> My client wants after goods receipts against 101 movement type the price should be up date in Material; Master immediately.
How much MAP should be after GR? From where this value will come?
The accounting entries are passed on the basis of price maintained in the material master. The MAP is the input to the business activity. So as per my understanding the MAP cant be updated with GR against a production order.
Also, the costing run would update the standard price, and wont be helpful as the indicator would be 'V' in material master.
Hope it clears.
Regards,
Rohit.

Material Price Update

Dear Experts,
Our client has one requirement;
We have A Pair material for which BOM & Routing has been maintained. When we execute cost run for the same material system updates the price with standard cost.
For this A Pair Material, we have another associated B Pair Material in the system for which no BOM and Routing has been maintained.What we want that we when we run cost estimate of A pair material, system will update standard price of B Pair material as well with same price.
Can this be achieved,need your fruitful suggestions.
Best Regards,
waqas

Hi,
Both via BOM and routing link has to be done. But if B is not a part of A and entirely different material then why you will link with BOM?
Better maintain a standard price in material master in costing 2 view.
Another suggestion. If B is a low grade material I am sure you are producing it. It may be with customized material type. Its better you maintain BOM and routing for that also.
Not sure how much doubt I am able to clear it out.
Hope it helps.
Regards,
Krishnendu.

Reg. sizewise material price for AFS material

Dear Experts
In AFS material how to give size wise material price. Because AFS has size and color in Grid.
Thanks in advance
Rajakumar.K

Dear Rajkumar,
You need to do the following.
Please check the Pricing indicator of that material in the material master - under AFS sales Data view.
If you want to carry out Grid level prizing - the pricing indicator should be 01.
And also ensure the following..
In SPRO - IMG - SD - Basic Functions - Pricing - Pricing control - Define AFS specific condition types.
Check the check box - Dim.Condition(for Grid level pricing) - against your condition type - which will make the condition type to be treated as AFS-specific.
The same answer is available in the forum.. Refer the link - answer gn by me..
Re: AFS - SCHDULE LINE WISE PRICE
Thanks!
Venkatesh.S.P

Valucation Type PROD_PRICE (material price) and NET_COST(Material net cost)

Hello gurus,
When transfer BOM to GTS, we got two values in product master under price tab:
Valuation type PROD_PRICE: 1000USD (valude is same to standard price in ECC material master)
Valuation type NET_COST: 900USD (where it is from?)
Can you please tell the difference between above two? In most cases, those two types have same values in product, but sometimes they are different.
Thank you,
Ryan

Hi ,
Please check the Valuant variant assigned against the step " Define Goods Received Valuation for Order Delivery" in IMG under Product cost by Order.
This will have impact on the valuation.
Njoy
Siva
Check the Price strategy for Materials. SAP help says as below :
================================================================
Define Goods Received Valuation for Order Delivery
This step is only relevant if your have specified price control V in the material master records of semifinished products or finished products.
In this step you specify how the receipts for materials with price control V are valuated.
When the master record of a material specifies price control V, the value for the credit is determined using a valuation variant. You must define this valuation variant separately for each valuation area. The valuation variant determines which material price is used for the credit posting.
For materials with price control S, on the other hand, the credit posting is always made at standard price.
If you deliver to stock at a price that is not the standard price, the system will report an output price variance in variance calculation.
Requirements
You must already have processed the step Define valuation variant.
Actions
If you have materials with price control V, you must specify for the valuation area which valulation variant should be used at the time of the goods receipt. Specify the goods receipt valuation for your material with price control V in this step.
=================================================================

Moving avergae price updation in material master for project stock

Dear All,
My query is pertaining to updation of MAP( moving average price) for project specific procurement ( as project stock) for valuated project stock.
As definelty the cost of procurement gets consumed by project .but i want to know does the project stock procurement still updates the moving avergae price or not.
Ex:-Suppose MAP in material master is 10 USD ( with qty 1)and i procure the same material ( qty 1)for project with account assignment Q for 9 USD . now will the MAP in material master becomes 9.5 USD or it remains 10 usd.?
Please reply urgently
Regards
Amit

Hi Amit,
If your Project Stock is valuated, then, the valuation data for it is stored in a different table: QBEW.
The normal, anonymus warehouse stock (the unrestricted use stock which is not assigned to any project or to any sales order) has its valuation data stored in MBEW.
The "Accounting 1" view in the Material Master MM03 ONLY displays the data of MBEW.
In the material master you will never see the valuation data of the valuated project stock (table QBEW) or the valuated sales order stock (valuation indicator "M" - table EBEW).
The valuation data for the tables QBEW and EBEW can be seen in SE16 or in the transaction MBBS.
Also note that these valuated special stocks are managed independently of the normal stock. If, for example, you change the Moving Average Price of your normal stock in MBEW, this will not have any influence on your project stock, as the data is under a totally diferent table QBEW.
I hope this helps you,
Esther.

Material master update through BAPI

Hello Experts,
We are using BAPI_MATERIAL_SAVEREPLICA to update material master . It is required to update RefPlant:consumption (MARC-VRBWK) in forecast view . We could not find any field corresponding to MARC-VRBWK in table parameters PLANTDATA .
Please help me if there is any way to update RefPlant:consumption (MARC-VRBWK ) in forecast view by using BAPI_MATERIAL_SAVEREPLICA .
If there is any other BAPI to update the field please let me know .
Regards,
Kiran.

Hi Suhas,
I tried EXTENSIONIN & EXTENSIONINX approach but the MARC-VRBWK was not reflected. I did some research and came to know that these extensions can be used to update the custom fields . If there is any way to update the standard field like MARC-VRBWK using extension please let me know . It would be great help .
Thanks,
Kiran.

Material cost updating in COPA at the time of Billing and Delivery 2 Time.

Hi All
I had created sales order( MTO).
Sales Order No 61224069 u2013 50
Sales Order line item 40 created > PR & PO created (MD02) > MIGO > Delivery of Order (VL01N) > Settlement (VA88) >Billing( VF01) > Settlement (VA88).
I have two COPA Document and Material Price updating 2 Time in COPA report.
Please let me know Its Process error Or Configuration error.
If Process -- Please let me know the correct process
If Config -- Please let me know where to check
Thanks In Advance.
Alok Dixit

Hi Ajay
Thanks for the reply.
The COPA Documents Generated 2 Times through settlement.
*When document generated.*
1 After Delivery Sales order is settled
2 After Billing Sales order is settled
*What sort of value*
There i maintain the PA Stracture as same as CCS. But in the COPA report system is updating Material Cost 2 times.
*Record Type*
Record Type for documents is C in both cases
Settlement after Billing & Delivery.

Material Price Evaluation

Good Evening.
In my SAP R/3, release 4.7, we have a material price evaluation with Standard Price.
The material price, is updated every year, with MR21, but we have only a valid price, in table MBEW (MBEW-STPRS).
In next months, this logic is going to be changed, with another one.
My customer will manage material price evaluation through the Purchase Order Material Price. So, if the same material i am going to buy has different prices, after the goods entry, i need to save the several prices, and not the standard one..as now..
For ex. Material Quantity Price
               XXX ,     1           2
               XXX ,     1           3
               XXX ,     1           4
Therefore, i will consider more than one valid price (and not the average).
My question is: is there any way to manage different prices, in standard procedures? Or shall i use a custom solution?
I need the price information, because the following goods issue will consider both the quantity and the different price.
I thank you in advance for your cooperation.
Francesco

Hi FranciscoPas,
As per my understanding, you want to valuate each of your goods movement at PO price .. .. ...
For example :
   PO for 1 quantity price is $ 500 .
In Inventory the accounting document will have two entries   one is material account (BSX ) and another is GR/IR clearing account ( WRX) ... ... .
As per your requirement you want that the value to be posted to material account should equate to PO ....
One more option to do this is to manage material by Moving average price so that at each posting the accounting will be posted with the price in PO ...
However making material to Moving average price might not be acceptable by your business ... not sure You have to check this ..
I can comment on other options which are suggested above :
>> Split valuation can not be applied here as you need to create accounting view for each segment you want to maintain price and creating accounting view for every new goods movement is off-course not feasible
>> Automatic batch creation for each goods movement by setting valuation category as X , for which prices will be maintained for each goods movement and every time new batches will be created .
Do you want to test this functionality in your system , I can help you in creating examples ?
Rgs
Shashank

Material - quantity updating

In tcode OMS2, for each material type, we have options to select "Qty updating", "value updating" and so on.
If i select only "Qty updating" for a material type, does that mean, system is going to track only quantities for those materials and not the values? Does that mean that when we do any postings in the system there will no accounting document posted? Also wanted to confirm that there is no necessity to maintain the material price on the material master.
Thanks

Hi
1)Material tyep UNBW stand for non-valuavted material,no accounting data maintain in material master,therefore only be procured with account assigenemnt
2)Material type NLAG-stand for non stock material,neither quantity nor value is update for this material
If you dont want to update the Quantity and Value as well then go for text material instead of creating material master data.
By this you are not going to keep the material stock as well as valuation for that material
Regards
Kailas ugale

Vat calculation to be done on labour service charges and material price.

Hi exeprt
I have scenario where i required to pay vat on labour service charges nd material price.
Calculation
material price is 1000, in there is additional service on tht we pay service charges.
Material price 1000
lab service charges 12
Vat should on on 1012
Regard
Nabil

HI
see You have your tax procedure in OBYZ t-code
There you will have subtotal price+excise duty as subtotal in your tax procedure your excise will zero so remain only material price
subtotal 591 =material+service tax -statical
592=service tax 10% on 591
593 =service tax 2 % on 591
594 =service tax 1% on 591
after that subtotal 595 ==from 591 To 594 -stastical
596===vat on 595
Regards
Kailas Ugale

Reg material price

Dear all,
for a HALB material price given in material master is 0 but when a production order is being done for this material during GR we are getting a price.How do we get this(checked whether it is carrying total of all its components price + activity price) but what we are getting is a much higher value.

Hi,
Check the pricing procedure and try to find out the other costs extracted during the process order creation
Hope this helps you
Cheers
Srinivas

Cost price update

Hi guys
i have a problem in updating cost price for all finished goods
we set in MM for all Raw Materials, process chemcials and packaging materials as moving average price and semi and finished goods items as standard
our raw material and packaging items changes prices once in a month based on international market prices. when we started SAP we updated these items prices and that price showing standard price field.
now when i updated FG cost price it is taking standard price cost for BOM and updating cost price and is not giving accurate costing. everymonth cost price is same since it is not taking moving average field price which is correct one
so guide me everymonth how to replace standard price field with moving average price field in MM so that cost price of the finished product will be accurate
total items are more than 4000 so please do not guide me to change manually by using MR21
Regards
Ved sai dut

Hi Ved,
Please check the priority of strategy sequence in the Valuation variant assigned to your Costing variant in Tcode OKKN. The first priority might have been set to standard price. So, Change it to 'Moving average price' and the system will read the prices in the Moving average price field in the material master.
You DO NOT have to use MR21 or change any material prices or use material ledger. If you set the priority to moving average price, the system automatically reads those prices in the BOM items while costing.
Hope this should resolve your issue.
Regards,
Vishnu.

Material Price updation through Material Ledger

Similar Messages

Maybe you are looking for