Material with PPM allow the date change

Hi Experts,
I have a issue regarding the date change in process order which is effected by the APO scheduling dates.
Now i have observed that materials having PPM are not allowing me to change the dates even if i try manually.
But Materials without it are easyily taking the dates in changed mode.
My requirement is to change the date manually and APO should not effect the dates later on.
Any timely suggestion will be rewarded .
Reagrds
Athilles

Hi,
In R3, check under "Adjust dates"  in  define scheduling parameters for process orders ( OPUZ) what is the setting defined.
Try with different settings.
Thanks,
nandha

Similar Messages

  • I bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

    i bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

    Have you went to Settings>General Time&Date and correct the time.  Make sure the time zone is correct too.  Also go to Settings>General>Inernational and make sure the Gergorian calender is selected.

  • The date changed for unlocking my iPhone from July to October

    For some change reason the date changed on which I was able to unlock my phone. I was July but suddenly it changed to Oct 2012. I have a German provider (T-Mobile) but they are not able to help me. Does anyone know waht happend. I found more people with the same question in other forums but no answers.

    Don't know what to tell you. Yours is the first post of its kind regarding a "delay" in authorizing an official unlock I've seen, and quite frankly I can't imagine any reason for such on Apple's end. All that Apple does is add your phone's IMEI number to a data base of officially unlocked iPhones. Something seems fishy to me regarding what your carrier told you. At any rate, there is no one from Apple here, thus nothing anyone here can do to help you. You could always call AppleCare & verify the veracity of what you were told, and if not true confront your carrier.
    Good luck.

  • [svn:osmf:] 14474: Adding a 'dispatchInitialChangeEvent' parameter to the ' watch' method in order to allow the initial change event from being dispatched, continued.

    Revision: 14474
    Revision: 14474
    Author:   [email protected]
    Date:     2010-02-28 23:53:31 -0800 (Sun, 28 Feb 2010)
    Log Message:
    Adding a 'dispatchInitialChangeEvent' parameter to the 'watch' method in order to allow the initial change event from being dispatched, continued.
    Modified Paths:
        osmf/trunk/framework/OSMF/org/osmf/metadata/MetadataWatcher.as

    *Feedback*
    "Use the form below to send us your comments. We read all feedback carefully, but please note that we cannot respond to the comments you submit."
    http://www.apple.com/feedback/ipad.html
    We can complain about Apple's business decisions, but these discussions are user to user talk about possible solutions.
    Here are the places to report bugs:
    Get an account at
    http://developer.apple.com/  then submit a bug report to http://bugreporter.apple.com/
    Once on the bugreporter page,
       -- click on New icon
       -- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs.  Scroll down to find the area or application that matches the problem.
       -- etc.

  • [svn:osmf:] 14473: Adding a 'dispatchInitialChangeEvent' parameter to the ' watch' method in order to allow the initial change event from being dispatched.

    Revision: 14473
    Revision: 14473
    Author:   [email protected]
    Date:     2010-02-28 23:45:28 -0800 (Sun, 28 Feb 2010)
    Log Message:
    Adding a 'dispatchInitialChangeEvent' parameter to the 'watch' method in order to allow the initial change event from being dispatched.
    Modified Paths:
        osmf/trunk/framework/OSMF/org/osmf/metadata/MetadataWatcher.as

    Perhaps you're not handling the "EndOfStreamEvent" correctly/at all, and thus not freeing up the socket to listen for the "NewReceiveStreamEvent " after the initial stream has ended...
    ?

  • Why did the date change to september 21 when it is realy august 21?!?!

    I tried cropping a picture and suddenly my phone turned off then turned back on by itself. When it turned back on i noticed the date changed to september! Why did this happen? And how can i change back the date?

    This has occured on my iPhone 4 16GB three times this morning.  Once at 8:15a, then at 10:30a, and just now at 12:00p today (all times are Central). 
    Device:  iPhone 4 16GB (MC318LL)
    Carrier:  AT&T
    iOS Version: 5.1.1 (9B206)
    Turning the phone off and on does not fix the problem.  Could be an issue with the date/time info when queried from the carrier. All three times I was on 3G and had a weak signal. Once the date changed, 3G was lost and then went to 2G (EDGE) and then 3G was restored.  I am wondering if it will happen at 2:00p also.

  • When I take a picture with my iphone, the date does not show when I down load the picture. Is there a way to program this?

    when I take a picture with my iphone, the date is not downloaded to my picute. Is there a way to get the date put on my pictures.

    Dropbox "Camera upload" option just rename the files and looks like this.

  • My iPad Air is disabled after wrongpassword attempts.I didn't sync it with my laptop also. How can I restore it with out losing the data.

    My iPad Air is disabled after wrongpassword attempts.I didn't sync it with my laptop also. How can I restore it with out losing the data.

    You can't unlock it without losing data. It's too late for that now. You totally erase the iPad when you unlock it and you will have to start all over again. Most of your purchased content can be downloaded again.
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Download past purchases - Apple Support

  • Monitor the data change

    Hello guys,
    I have a little problem here. I got the data stream from the data acquisition device, and the data could be indicated on a chart. I could see the waveform on the Labview front panel, and even got the data value from the indicator. However, I need to record the data at one moment, and record another data after a small time interval. Then, I need to monitor the data change.  Any good idea? Thank you!

    Thank you for your reply.
    I would like to monitor the data, when the data sudden drop-down, I could send a message to switch off the system. My idea is obtain a data at one moment and obtain another data after a small time interval. When the change is larger than acceptable value, I switch it off.
    Could you show me more detail about single point acquisition? So appreciate!

  • [svn:fx-trunk] 14009: DataGroup.getVirtualElementAt() needs to revalidate the element when the IR already exists but the data changes .

    Revision: 14009
    Revision: 14009
    Author:   [email protected]
    Date:     2010-02-05 12:53:05 -0800 (Fri, 05 Feb 2010)
    Log Message:
    DataGroup.getVirtualElementAt() needs to revalidate the element when the IR already exists but the data changes. 
    The element also needs to revalidate if it is resized, whether or not the IR existed before.  This wasn't part of the bug but Hans realized this when he did the code review.
    QE notes:
    Doc notes:
    Bugs: SDK-25354
    Reviewer: Hans
    Tests run: checkintests
    Is noteworthy for integration:
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-25354
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DataGroup.as

    Please can u answer it fast

  • Creating a Materialized View Log After the Data has been instered

    Hi,
    I am trying to create a method of replication from Oracle to MySQL using the Materialized View Log table.
    This has been done before and works quite well, the only problem is that I am trying to impliment the log after the table has been created and populated and wish to push all the existing data through the log file...
    Does anyone know if it is possible to refresh the Materialized View Log and not a Materialized View.
    The way the replication is intended to work is:
    Oracle> Data inserted into table
    Oracle> writes the vector data to the MVL
    Script> Monitors the MVL and can see the changes being made to the Oracle Table
    Script> Updates MySQL with the data and removes the rows from the MVL
    MySQL is then used with other unix systems
    Currently we export the data from the table using Triggers and a cronjob running every x minute to check for changes in the TriggerTables
    Many thanks for your time on this, I have been checking for almost a whole working day and not found the answer to this problem.

    Thats what I thought, the MVL will only read data that has changed since it was created and wont have the option to load in all the data as though it was made before the table was created.
    From what I have read, the MVL is quicker than a Trigger and I have some free code that prooved to work from a MVL using it as a reference to know what records to update. There is not that much to a MVL, a record ID and type of update, New, Update or Delete.
    I think what I will have to do is work on a the same principle for the MVL but use a Trigger as this way we can do a full reload if required at any point.
    Many thanks for your help.

  • How do I change the background colour on notes. I need a darker background due to a visual issue. Apple has now discriminated those with visual issues.  I am so not happy with many of the new changes because of this.

    I am so not happy with the new changes especially when it come to the ability to change background colours, fonts and font sizes/ colours... Does Apple really think that their only audience is the young cool crowd or people who do not have a visual impairment.  Think before you make changes to your software and programs.  You WILL lose more people to androids if you continue this way.
    At least give users the ability to make apps like notes their owned by allowing them to pick the style, theme, background and colour, font size and colour. 
    A very ****** off Apple user who is now looking at Androids.

    Hi Tricia,
    I'm sorry but I don't see an ideal way to do this. Is it the yellow label text, e.g:  "New" against the white background which is causing the difficulty?
    The only way I've found of getting the colors to change in Notes is via Settings>General>Accessibility>Invert Colors but then it looks like something has barfed all over your screen.
    I'd be very, very surprised if Apple do not fix this, firstly because I believe "Accessibility" is a legal matter and secondly because they will not want to cause difficulty for their customers.  We have to remember that this is a major, major overhaul of iOS, it has essentially been taken back to the drawing board and done from scratch again, it may take a little time, but I'm sure they will fix these issues.
    Regards,
    Steve

  • How do you make the date change for every entry when inserting.

    Hello, I am making a daily vehicle inspection report for my truck and I would like to make a 7 day calendar but I would like to insert the date ie Monday Feb 22, 2010, Tuesday Feb 23, 2010 etc...and have it change for each day of the week. is there a way to do this? Also can you put an outline or a box around the 6 lines of text that you input.
    Thank you
    Ottoman

    Jerrold Green1 wrote:
    Ottoman,
    As Peter says, you can use a Table for this. You do not, however, need to enter two dates to fill with a series of dates. Dates are an exception to the general Fill rule. Just enter one, and fill down to get successive dates.
    Other exception available:
    a single cell is sufficient for every entries ending with a number :
    president1
    thief2
    king3
    behave this way.
    Durations behave like numbers : two cells are required.
    Yvan KOENIG (VALLAURIS, France) samedi 27 février 2010 18:20:29

  • If someone changes the date on an iCal event should the date change for the invitees if they accept the change?

    My wife's calendar schedule is pretty hectic and prone to date changes. If I accept the initial invitation it appears correctly in my calendar and syncs correctly to all my devices but I find that if she changes a date and I accept the new change, the event stays the same in my calendar. 
    Is this correct or am I having problems?
    Cheers

    Thanks - I did get the event to go back to 2008, but should the individual clips move to the correct spot in the timeline also?  I need to go back and play with it a little more - I would guess you might have to look at the length of clips on either side of where you want the new clip placed for it to work correctly. 
    So, I guess my 2nd question is if you can get the new clips that were added at the end of the event to move into the correct position within the event.

  • Custom sort pivot table columns with Essbase as the data source

    Is it possible to sort columns in a pivot table according to an arbitrary value that I define when the data is coming from Essbase?
    For example, say I have a dimension called Soda, with values Coke, Diet Coke, Dr. Pepper and Diet Dr. Pepper. I create a report with a sales measure with the measure labels on the rows and the Soda dimension on the column. By default the columns will be sorted alphabetically:
    Coke Diet Coke Diet Dr. Pepper Dr. Pepper
    Sales 1M .5M .75M 1.25M
    I want to create a report that looks like this:
    Coke Diet Coke Diet Dr. Pepper Dr. Pepper
    Sales
    I think I could do this if the source was relational just by creating bins or creating a custom column with a case statement that assigns each Soda an arbitrary value and then sort on this value. Everything I've tried with Essbase as the source, though, results in:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 42043] An external aggregate is found in an outer query block. (HY000)
    Any ideas?

    Hi,
    1. You can try solve the 'An external aggregate is found in an outer query block' by changing aggregation rule for your measure both in physical and business layer.
    By default it's set to Aggr_External - change it to Sum
    In physical : Column properties->Aggregation rule
    In business model : Column properties->Aggregation tab -> Default aggregation rule.
    This may change the result - after changing check whether you still get correct values.
    2. Also, in case the desired order is the same as the order of members in the Essbase cube, and you want to leave Aggr_External, you can create a calculated column that will help you with the sort.
    See http://oraclebizint.wordpress.com/2008/04/28/oracle-bi-ee-101332-handling-sort-order-in-hyperion-essbase-931-evaluate-and-mdx/
    Hope this helps,
    Alex

Maybe you are looking for

  • Tax calculation in Sales order

    Hi, I wanted to check how sales tax was calculated on a Sales order for a US customer in CRM. taxware is used for tax calculation. I went to item level, conditions tab, selected the condition type, "state tax" and clicked on "accesses" button. The sy

  • SQL query in bean

    public String select() try Connection conn = DriverManager.getConnection (url, dbUser, dbPassword); Statement stmt = conn.createStatement(); String query = "SELECT ID, name, summary, start_time, end_time FROM cruises WHERE ID = "'" + request.getParam

  • Report (report builder 6.0) vs. Form Based

    Hello all, I have a report created in report builder 6.0. It currently takes at least 12 seconds to display/print results. Will the report performance be improved in web based reporting when we migrate to Application server Forms and Reports? Thank y

  • Separate Accounts?

    Is it possible to have 2 separate iTunes accounts, with different libraries for different iPods, and different Apple ID's all on the same computer and billed to same account?

  • Location services - can't start

    Hi, i have a Iphone 4s with OS 7.1 installed. The problem i have is that i can't attivate a "location services" at all There is option in Settings > Privacy > Location services - to switch it off/on but slider is gray and not active and can't do anyt