MATMAS Inbound IDOC

Hello all,
Iam working on Material master Data Upload using the IDOCs.
-There are about 3K records.
-I have collected the IDOCs and executing the RBDAPP01
-in background with Parallel processing and with Packet size as 5.
All the IDOCs processed these way are going to in to an Error :
IDoc included in IDoc packet containing an error: transfer it separately
Regards
GangaPrasad

Hello Prasad,
Either you have to debug for finding the error (breakpoint in IDOC_INPUT_MATMAS01) or reload the Idocs with package size 1.
Regards,
John.

Similar Messages

Inbound idoc MATMAS - find userexit to map extension

Hi !
I have an inbound IDOC MATMAS04 with a specific extension. I need to map the fields of the extension : some of them into an append of MARA, some others into characteristics.
I can't find the user exits I need.
I guess there are 2 of them. The first one for mara append BEFORE the creation of the material, and the second one for the characteristics AFTER the creation of the material.
Does anyone know where I can find such user exits (even HOW to find them would be so much appreciated) ?
Kind regards,
Yann

Hi..
This is the Enhancement MGV00001
and The FM exit is EXIT_SAPLMV02_002 To Enhance IDOC for MARA segment in Inbound.
Reward if Helpful

I can create material using inbound Idoc of type MATMAS01, but not MATMAS05

I can create material using inbound Idoc of type MATMAS01 in WE19, but MATMAS05 failed. In fact I used same data ( different material number), and same inbound function, but got different result.
What is different between MATMAS01 and MATMAS05? Is there some configuation need for MATMAS05?
My system is ECC5.0. Thanks.

Hi, nagaraj
this is inbound IDoc, not outbound IDoc, so we can't assign Basic type in WE20, only can assign Message type.
In WE82, there are 5 records about Messagetype MATMAS:
     Message type   Basic type     Release
      MATMAS         MATMAS01        30A
      MATMAS         MATMAS02        30D
      MATMAS         MATMAS03        40A
      MATMAS         MATMAS04        46C
      MATMAS         MATMAS05        470
   I think it should be ok.
In WE57, there 2 records are exist:
   FM_name                 BasicType       MessageType
IDOC_INPUT_MATMAS01       MATMAS01         MATMAS
IDOC_INPUT_MATMAS01       MATMAS05         MATMAS
so I think all configurations should be ok.
Message was edited by:
        liu bin

Step-by step procedure for INBOUND IDOC (VENDOR CREATE / CHANGE)

Hi ,
Can any body provide me the step-by-step procedure for Inbound IDOCS.
As i'm new to this i need the the clarification between Inbound & outbound idocs.
How can we differentiate both?
where to define outbound & where to define Inbound?
( If possible Please explain me the procedure for Vendor Create through INBOUND IDOCS )
Thanks in advance..

Hi,
Ale Technology is SAPu2019s technology to support distributed yet integrated processes across several SAP systems.
Outbound Process:
ALE Outbound Process in SAP sends data to one or more SAP Systems. It involves four steps.
1. Identify the need of IDoc: This step starts upon creating a application document, can relate to a change to a master data object.
2. Generate the Master IDoc: The document or master data to be sent is read from the database and formatted into an IDoc format. This IDoc is called as a Master IDoc.
3. Generate the Communication IDoc: The ALE Service layer generates a separate IDoc from the Master IDoc for each recipient who is interested in the data. Separate IDocs are generated because each recipient might demand a different version or a subset of the Master IDoc. These recipient-specific IDocs are called Communication IDocs and are stored in the database.
4. Deliver the Communication IDoc: The IDoc is delivered to the recipients using an asynchronous communication method. This allows the sending system to continue its processing without having to wait for the destination system to receiver or process the IDoc.
Inbound Process:
The inbound process receives an IDoc and creates a document in the system.
1. Store the IDoc in the database: The IDoc is received from the sending system and stored in the database. Then the IDoc goes through a basic integrity check and syntax check.
2. Invoke the Posting Module: The control information in the IDoc and configuration tables are read to determine the posting program. The IDoc is then transferred to its posting program.
3. Create the Document: The posting program reads the IDoc data and then creates a document in the system. The results are logged in the IDoc.
Over view of IDocs:
IDoc is a container that is used to exchange data between any two processes. The document represented in an IDoc is independent of the complex structure SAP uses to store application data. This type of flexibility enables SAP to rearrange its internal structure without affecting the existing interface.
IDoc interface represents an IDoc Type or IDoc data. IDoc Type represents IDocu2019s definition and IDoc Data is an instance of the IDoc Type.
IDoc Types:
IDoc type structure can consist of several segments, and each segment can consist of several data fields. The IDoc structure defines the syntax of the data by specifying a list of permitted segments and arrangement of the segments. Segments define a set of fields and their format.
An IDoc is an instance of an IDoc Type and consists of three types of records.
i. One Control record: each IDoc has only one control record. The control record contains all the control information about an IDoc, including the IDoc number, the sender and recipient information, and information such as the message type it represents and IDoc type. The control record structure is same for all IDocs.
ii. One or Many Data records: An IDoc can have multiple data records, as defined by the IDoc structure. Segments translate into data records, which store application data, such as purchase order header information and purchase order detail lines.
iii. One or Many Status records: An IDoc can have multiple status records. Status record helps to determine whether an IDoc has any error.
Message in IDoc Type:
A Message represents a specific type of document transmitted between two partners.
Outbound Process in IDocs:
Outbound process used the following components to generate an IDoc. A customer model, and IDoc structure, selection programs, filter objects, conversion rules, a port definition, an RFC destination, a partner profile, service programs, and configuration tables.
The Customer Model:
A customer model is used to model a distribution scenario. In a customer model, you identify the systems involved in a distribution scenario and the message exchanged between the systems.
Message control:
Message control is a cross application technology used in pricing, account determination, material determination, and output determination. The output determination technique of Message control triggers the ALE for a business document. Message control separates the logic of generating IDocs from the application logic.
Change Pointers:
The change pointers technique is based on the change document technique, which tracks changes made to key documents in SAP, such as the material master, customer master and sales order.
Changes made to a document are recorded in the change document header table CDHDR, and additional change pointers are written in the BDCP table for the changes relevant to ALE.
IDoc Structure:
A message is defined for data that is exchanged between two systems. The message type is based on one or more IDoc structures.
Selection Program:
Is typically implemented as function modules, are designed to extract application data and create a master IDoc. A selection program exists for each message type. A selection programu2019s design depends on the triggering mechanism used in the process.
Filter Objects;
Filter Objects remove unwanted data for each recipient of the data basing on the recipients requirement.
Port Definition:
A port is used in an outbound process to define the medium in which documents are transferred to the destination system. ALE used a Transactional RFC port, which transfers data in memory buffers.
RFC Destination:
The RFC destination is a logical name used to define the characteristics of a communication link to a remote system on which a function needs to be executed.
Partner Profile:
A partner profile specifies the components used in an outbound process(logical name of the remote SAP system, IDoc Type, message type, TRFC port), an IDocu2019s packet size, the mode in which the process sends an IDoc (batch versus immediate), and the person to be notified in case of error.
Service Programs and Configuration Tables:
The outbound process, being asynchronous, is essentially a sequence of several processes that work together. SAP provides service programs and configuration tables to link these programs and provide customizing options for an outbound process.
Process flow for Distributing Transactional Data:
Transactional data is distributed using two techniques: with Message control and without message control.
Process flow for Distributing Master Data:
Master data between SAP systems is distributed using two techniques: Stand alone Programs and Change Pointers.
Triggering the Outbound Process via Stand-Alone Programs:
Stand-Alone programs are started explicitly by a user to transmit data from one SAP system to another. Standard Programs for several master data objects exist in SAP. Ex. The material master data can be transferred using the RBDSEMAT program or transaction BD10.
The stand-alone programs provide a selection screen to specify the objects to be transferred and the receiving system. After the stand-alone program is executed, it calls the IDoc selection program with the specified parameters.
Triggering the Outbound Process via Change Pointers:
The change pointer technique is used to initiate the outbound process automatically when master data is created or changed.
A standard program, RBDMIDOC, is scheduled to run on a periodic basis to evaluate the change pointers for a message type and start the ALE process for distributing the master data to the appropriate destination. The RBDMIDOC program reads the table TBDME to determine the IDoc selection program for a message type.
Processing in the Application Layer:
The customer distribution model is consulted to make sure that a receiver has been defined for the message to be transmitted. If not, processing ends. If at least one receiver exists, the IDoc selection program reads the master data object from the database and creates a master IDoc from it. The master IDoc is stored in memory. The program then calls the ALE service layer by using the function module MASTER_IDOC_DISTRIBUTE, passing the master IDoc and the receiver information.
Processing in the ALE Interface Layer:
Processing in the ALE Layer consists of the following steps:
u2022 Receiver Determination: The determination of the receiver is done through Customer Distribution Model.
u2022 IDoc Filtering: if an IDoc filter is specified in the distribution model for a receiver, values in the filter are compared against the values in the IDoc data records. If a data record does not meet the filter criteria, it is dropped.
u2022 Segment Filtering: For each sender and receiver combination, a set of segments that are not required can be filtered out.
u2022 Field conversion: Field values in data records are converted by using the conversion rules specified for the segment.
u2022 Version change for segments: Segments are version-controlled. A new version of a segment always contains fields from the preceding version and fields added for the new version. Release in IDoc type field of the partner profile to determine the version of the segment to be generated.
u2022 Version change for IDocs: IDocs are also version controlled. The version is determined from the Basic Type field of the partner profile.
u2022 Communication IDocs generated: The final IDoc generated for a receiver after all the conversions and filtering operations is the communication IDoc. One master IDoc can have multiple communication IDocs depending on the number of receivers identified and the filter operations performed. IDoc gets the status record with a status code of 01 (IDoc Created).
u2022 Syntax check performed: IDoc goes through a syntax check and data integrity validation. If errors found the IDoc get the status of 26 (error during syntax check of IDoc u2013 Outbound). If no errors found the IDoc gets the status 30 (IDoc ready for dispatch u2013 ALE Service).
u2022 IDoc dispatched to the communication Layer: In the ALE process, IDocs are dispatched using the asynchronous RFC method, which means that the sending system does not await for data to be received or processed on the destination system. After IDocs have been transferred to the communication layer, they get a status code 01 (Data Passed to Port OK).
Processing in the Communication Layer:
To dispatch an IDoc to a destination system, the system reads the port definition specified in the partner profile to determine the destination system, which is then used to read the RFC destination. The RFC destination contains communication settings to log o to the remote SAP system. The sending system calls the INBOUND_IDOC_PROCESS function module asynchronously on the destination system and passes the IDoc data via the memory buffers.
Inbound Process in IDocs:
An inbound process used IDoc structure, posting programs, filter objects, conversion rules, a partner profile, service programs, and configuration tables to post an application document from an IDoc.
Posting Program:
Posting programs, which are implemented as function modules, read data from an IDoc and create an application document from it. A posting program exists for each message. Each posting program is assigned a process code. A process code can point to a function module or a work flow. In the standard program process codes always point to a function module.
Ex. The posting program for message type MATMAS is IDOC_INPUT_MATMAS which has a process code MATM.
Workflow:
A workflow represents a sequence of customized steps to be carried out for a process. The workflow management system is used to model the sequence, identify information required to carry out the steps and identify the person responsible for the dialog steps.
Partner Profile;
A partner profile specifies the components used in an inbound process (partner number, message type, and process code), the mode in which IDocs are processed (batch versus immediate), and the person to be notified in case of errors.
Process flow for the Inbound process via a Function Module:
In this process, IDocs are received from another system and passed to the posting function module directly.
1. Processing in the communication Layer:
The IDOC_INBOUND_ASYCHRONOUS program, triggered as a result of an RFC from the sending system, acts as the entry point for all inbound ALE processes. The IDoc to be processed is passed as an input parameter. Control is transferred to the ALE/EDI layer.
2. Processing in the ALE/EDI Interface Layer:
u2022 Basic integrity check: A basic integrity check is performed on the control record.
u2022 Segment Filtering and conversion: Filtering out unwanted segments and carry out any required conversion of field values.
u2022 Creation of Application IDoc: The application IDoc is created and stored in the database and a syntax check is performed. If there are errors it gets status code of 60 (Error during Syntax check of IDoc u2013 Inbound). At this point a tangible IDoc, which can be monitored via one of the monitoring transactions, is created and the IDoc gets status code 50 (IDoc Added).
u2022 IDoc Marked ready for Dispatch: IDoc gets the status code 64 (IDoc ready to be passed to application).
u2022 IDoc is passed to the posting program: The partner profile table is read. If the value of the Processing field is set to Process Immediately, the IDoc is passed to the posting program immediately using the program RBDAPP01.
3. Processing in the Posting Module:
The process code in the partner profile points to a posting module for the specific message in the IDoc. The posting program implemented as a function module either calls a standard SAP transaction by using the Call Transaction command for posting the document or invokes a direct input function module.
The results of execution are passed back via the function moduleu2019s output parameters. If the posting is successful IDoc gets the status code 53 (Application Document Posted) or it gets status code 51 (Error: Application Document Not Posted).

Creation of Sales Order and Service Contract from Inbound IDOC

Hi Experts,
My requirement is to create a Sales Order as well as a Service Contract from one Inbound IDOC. I am getting the Inbound IDOC from a third Party. The message type is ORDERS and Basic Type is ORDERS02. How ever i am using an extension type IDOC which carries all the required data for Sales Order and Service Contract. My requirement is like, to create a Sales Order first.
I have created a Z FM which is attached to the Process Code and subsequently to the message type. Inside the FM i an calling FM 'IDOC_INPUT_ORDERS' for creation of Sales Order. After that i am changing the IDOC data for the Document Type. I am changing the document type which is responsible for Contract Creation.
Then I am again calling the FM 'IDOC_INPUT_ORDERS' for creation of Contract with the help of IDOC data. But here the Contract is not getting created. It's getting failed during the Batch input session.
I need to solve this problem as soon as possible. Please help me. If there are any other options also please share.
Thanks in Advance.
Regards,
Priyabrata

Actually there is problem with BDCDATA. Inside the FM it's calling transaction with help of BDCDATA. If i am creating a Sales order or contract alone its creating successfully. But when i am trying to create both, it's retuning sy-subrc '1001' after calling the transaction on the second attempt. Is there any problem with BDCDATA like we can't handle with less time gap? Please help and give your inputs.
Regards,
Priyabrata

Creation of Service Contract from Inbound IDOC

Hi Experts,
I am using Inbound IDOC type ORDERS02 with message type ORDERS for creation of Sales Order. Now my requirement is like to create a Service Contract from that Inbound IDOC. The IDOC type contains all the data require to create a Service Contract. The scenario is like, after creation of Sales Order it will check for the corresponding Service Contract exits or not by querying on a Z table which contains all those entries.
So my idea is to create a Z Program, in which it will check for the Service Contract and will create the same by reprocessing the same IDOC or by calling some Function Module. Please suggest how shall i proceed to create a Service Contract.
Is there any way to reprocess the IDOC or to collect the Data from the IDOC segments pass them to a FM which is responsible for creation of Inbound IDOC. Please suggest if this is feasible.
Thanks in Advance.
Regards,
Priyabrata.

Actually there is problem with BDCDATA. Inside the FM it's calling transaction with help of BDCDATA. If i am creating a Sales order or contract alone its creating successfully. But when i am trying to create both, it's retuning sy-subrc '1001' after calling the transaction on the second attempt. Is there any problem with BDCDATA like we can't handle with less time gap? Please help and give your inputs.
Regards,
Priyabrata

How to read file from prsntn server in Inbound idoc FM.

Hi Experts,
I am new to idoc.
I have requirment that i need to read a file from presentation and application server and put in inbound idoc FM.Idoc will be processed in batch.
How can i put selection screen in FM and read the file?or how can i proceed with the solution?
Please help..
Umesh

Hi Umesh,
My understanding on your requirement is to read a file from pres. server and pass the data to an IDoc function module. Am I correct?
If this is the case then you can create a report which picks up the file from pres. server and then read data from the file and pass it to the parameters of the required function module.
Hope this helps.
Regards,
-Sandeep

How to create the INBOUND Function Module for INBOUND IDOCs

Hi Friends,
Can any Suggest me How to proceed to Create an INBOUND Function Module for Processing the INBOUND IDOCS
which are recieved from XI Server ?
I am working in SAP-ISU
Here i will recieve the INBOUND IDOCs for the Meter Reading Orders.
We have a Standard INBOUND FUNCTION MODULE
IDOC_INPUT_ISU_MR_UPLOAD
which Uploads the Meter Reading Results.
I copied the Same function Module into ZIDOC_INPUT_
and working on it.
Can any one suggest me, whether i am going in correct way or not.
In IDOC_INPUT_ISU_MR_UPLOAD Inbound fun module,
BAPI_MTRREADDOC_UPLOAD is used to Update or Insert the Meter Reading Results,
My requirment is to Insert and Update the Meter Reading Orders which are Inbounded from XI.
Can I Use the Same BAPI
BAPI_MTRREADDOC_UPLOAD
to Update the below fields,
EABL-SERNR
EABL-ZWNUMMER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS
EABL-ADATTATS
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Kindly Suggest me,
Thanks in Advance,
Ganesh

Hello Ganesh
I think you are going completely astray with you z-function module for IDoc processing.
If you look at TABLES parameter METERREADINGRESULTS (type BAPIEABLU ) of BAPI_MTRREADDOC_UPLOAD you will find many of the requested fields already:
EABL-SERNR => BAPIEABLU-SERIALNO
EABL-ZWNUMMER =>REGISTER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS => ACTUALMRTIME
EABL-ADATTATS => ACTUALMRDATE
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Field EABL-ZMESSAGE appears to be custom field (at least I cannot find it on ECC 6.0). If this field was added using include CI_EABL then you probably can get these values into the BAPI using the EXTENSIONIN parameter.
Check routine CHECK_UPLOADRECORDS in the BAPI which allows two extension structures:
- BAPI_TE_EABL
- BAPI_TE_EOSB
Not surprisingly BAPI_TE_EABL contains the include CI_EABL.
Regards
Uwe

Problem with user exit EXIT_SAPLIEDI_001 for Inbound Idocs in replacing G/L

Hello all,
I am currently facing an issue where my IDOC where exit EXIT_SAPLIEDI_001 is not appearing to work properly.
Basically I am using the FM that processes the inbound idoc (IDOC_INPUT_INVOIC_FI) to post an accounting document. We needed a solution where we need to substitute one of the G/L Accounts.
The current process in our SAP system is that we are creating a billing document which automatically generates the output type (running: program rsnasted subroutine edi_processing) to create and process the inbound idoc.
So I discovered FM EXIT_SAPLIEDI_001 which exports company code and G/L Account back does this.
In this exit, Since I needed to get data from the IDOC, I used the logic ASSIGN: ('(SAPLIEDI)IDOC_DATA[]') TO <fs_edidd> to get the DATA Records for further processing.
During the development and testing phase in the Sandbox system this works.
However when we moved this to production we encountered a situation where the G/L account was not being substituted so were assuming EXIT_SAPLIEDI_001 is not working properly. However when I reprocess this in production either by running the idoc with errors RBDMANI2 or BD87 the IDOC is properly posted and the G/L Account is substituted as well as if I try to repeat the output type of the billing document. So there are instances when in the actual business scenario it does not work except when I reprocess it.
I was wondering if there are any ideas why this could have happened?
Oh ... I also noticed when we transported the objects of the exit. When I try to double click the subroutine I made inside the exit it said the object does not exist. I had to generate the function group of FM EXIT_SAPLIEDI_001 in SE80 in production for it to reflect. I was wondering if this could have caused the issue.
Well I hope to hear from you.
Regards
Edited by: Rob Burbank on Dec 6, 2011 1:03 PM

Hi,
Check in t.code CMOD whether project is active or not (Activate the Project)
BR,
Vijay

Sale Order from Inbound IDOC

I am testing creating Sale Order from inbound IDOC with WE19.
Partn. number = AAA001
Partn. type = KU
Partn.func = PY
Message Type = ORDERS
Process Code = ORDE
I get message 51 "Error: Application document not posted" in IDOC status:
VKORG, VTWEG, SPART cannot be determined for customer AAA001 , vendor
Message no. VG 204
Diagnosis
No sales organization, distribution channel or division were sent to the
    IDOC. This data is necessary if a sales order is to be added
    automatically. If this data is unavailable, you cannot create a sales
    order document.
Procedure
If data on the sales organization, distribution channel and division
    have not been entered in the IDOC, it must be determined using a user
    exit defined in the program.

I will receive IDOC from external non-SAP system.
How can i populate E1EDK14 segment with appropriate values:
E1EDK14 -QUALF = 006
E1EDK14 -ORGID = Division (VBAK-SPART)
E1EDK14 -QUALF = 007
E1EDK14 -ORGID = Distribution Chanel (VBAK-VTWEG)
E1EDK14 -QUALF = 008
E1EDK14 -ORGID = Sales Organisation (VBAK-VKORG)
If external system does not know this values?
Edited by: S S on Feb 28, 2009 12:46 PM

Error determining posting period(infostructure S008,Variant Z2,RC3) while creating Sales orders from Inbound IDOCS

Hello,
I am getting this Error message"error determining posting period(infostructure S008,Variant Z2,RC3)" while creating Sales order from Inbound Idocs in the IDOC,which is affecting sales order creation.
While viewing this Info structure S008, I could see no records have been maintained. Wanted to know the reasons behind this Hard error?
Is it something related to Date Field used in the Update Rules for this Infostructure which is causing this posting period error?
Appreciate your inputs on this.
Thanks and Regards
Mohammed Roshan

Thank you Jelena,I checked the Ship. Delivery dates in the IDOC which are for Current Fiscal Year- 20140703 and 20140711,Could there be any other reason for this error?
Could it be an issue with e Update rule in this Infostructire S008
Secondly when we try change the update rule thru MC25 for this Infostructure S008,It gives a message"
"Maintenance of SAP standard updates not allowed"
Kindly advice
Thanks and Regards
Mohammed Roshan

Scheduling agreement inbound idoc error.

Hi Experts,
I am creating an Scheduling Agreement with DELFOR02 inbound idoc, while creation the Scheduling Agreement system is giving error regarding Scheduling Agreement not found. In fact I have create the Scheduling agreement by T-code VA31. And I check the table VLPKM, there are relevant record stored.
Then I maintain the view V_T663A to not check everything when inbound idoc recevie. and tried agan in t-code BD87. the system give me another message Make an entry in all required fields.
How can I handle these error messages?
Thanks..
Regards....

Does any one has ideas for that?
Thanks.

Inbound idoc for updating delivery date of purchase order

Hi All,
Our vendor sends a delivery file consisting of delivery date and quantity(could be partial) for line items of a purchase order.
I need to update the Purchase order line item with the delivery date and quantity sent from the Vendor. It should add a new confirmation line with custom confirmation category in the confirmation tab of the line item in the Purchase order.
Each time we get a delivery file we need to add a new confirmation line in the confirmation tab of the purchase order line item.
How can I get this working using inbound idoc processing? Which Idoc type should I use to solve my issue. Will ORDERSP work for my scenario?
Thank you,
Sonali.

>
sonali ashi wrote:
> We have all EDI set up done for ORDERSP idoc in our system. Problem when I use this idoc type by default system is always adding confirmation catgeory 'AB' but we want our custom category to be added instead of 'AB'.
> Edited by: sonali ashi on Dec 23, 2010 9:47 PM
Confirmation category used for order acknowledgement is define in configuation. You can change that from AB to your custom condition and EDI should pickup that.
SPRO->Material Management->Purchasing->Confirmation->Define Internal Confirmation Category
>
sonali ashi wrote:
> I have also noticed that 'AB' confirmation accepts only full quantity order acknowledgement through Idoc processing.
> Manually I can add a "AB" confirmation for partial quantity but in the idoc processing it fails.
> Edited by: sonali ashi on Dec 23, 2010 9:47 PM
Check tolerance limit defined for confirmation category in 'Conformation Control' Node in SPRO at same level as above.
Regards,
Pawan.

How to block the status mail for an inbound Idoc to a specific user

Hi,
I have to stop sending the error status mail to a specific user depenidng on Partner Type. This will trigger when an inbound Idoc contains status error(message type INVOIC &ORDRSP).This user needs other mails which are getting triggered with the same Idoc for the same partner. Basically, the requirement is to block only the status mail for that user. The statndard task for this is TS70008125 and it uses the agent determination rule 30000001 (Idoc Administrator).in WE46, this task is assigned to process code EDIR. I have copied the task to a custom task and changed the agent determination rule. I would like to know how will I configure this task so that this custom task will trigger for the status error, without altering other workflows for the same message type & the partner type. Or is there any other way to block the mail?
Thanks,
Santosh

Hi,
I have done the required coding to exclude the specific agent from the rule,copied the task and its ready. My question is how do I map this custom task to a particular partner type, for the message type INVOIC in WE20? (The message type used for the inbound Idoc is INVOIC). I checked the Partner profile in WE20. Most of the process code is using function module as the processing type.
Thanks,
Santosh

How to create Inbound Idocs in a ABAP program? Any function Module?

Hello Experts,
My requirement is : I have sales order data which I extracted from third party system in my internal tables. In the same box I need to create inbound Idocs and then consequently create sales orders.
I have used the function module IDOC_INBOUND_WRITE_TO_DB to create inbound Idocs from Sales Orders data in internal tables. I have populated all the data records with correct PSGNUM and HLEVEL values. My plan is to create inbound idocs with this function module and send those to IDOC_INPUT_ORDERS function module which creates Sales Orders.
If a sales order in the internal table in ABAP program contains only one item, then I am getting correct idocs. But if more than one item exists for a sales order then the line item segments which got repeated in Idoc are having PSGNUM and HLEVEL values as zero when I checked in WE02. As a result the hierarchy from the second item segment is getting disturbed and getting the status 60.
I populated T_EDIDD with data records from IDOC_INBOUND_WRITE_TO_DB.
To the function module IDOC_INPUT_ORDERS, T_EDIDC and T_EDIDD are the input. I observed that in T_EDIDD also the PSGNUM and HLEVEL values are blank.
I am getting Status 60 with message 'EDI: Syntax error in IDoc (segment cannot be identified)' for idocs which have more than one item.
I need to extract sales data from third party and create inbound idocs and create sales orders in one ABAP program only. I need to display corresponding Idoc numbers for the corresponding third party sales order number in a listoutput.
Can anybody please provide inputs?
Regards.

Hi Anjali,
Thanks for the response.
I have passed the PSGNUM and HLEVEL values while populating the data records. Then I sent the data records and control record information to the function module IDOC_INBOUND_WRITE_TO_DB. Inside this function module there is code to clear the PSGNUM values and HLEVEL values.
for compatibility: clear administration data of data records
           perform data_records_wipe
                                  tables
                                      t_data_records.
FORM DATA_RECORDS_WIPE
                  TABLES
                      T_DATA_RECORDS_IN STRUCTURE EDIDD.
LOOP AT T_DATA_RECORDS_IN.
    CLEAR: T_DATA_RECORDS_IN-MANDT,
           T_DATA_RECORDS_IN-DOCNUM,
           T_DATA_RECORDS_IN-SEGNUM,
           T_DATA_RECORDS_IN-PSGNUM,
           T_DATA_RECORDS_IN-HLEVEL.
    modify t_data_records_in.
ENDLOOP.
ENDFORM.                               " DATA_RECORDS_WIPE
This is the code which is clearing all the PSGNUM and HLEVEL values. After coming out of this function module we are getting the error idocs created with disturbed hierarchy.
I need to create INBOUND Idocs with the data in ABAP program.
Please let me know if any inputs? Is there any function module existing to create Inbound Idocs inside an ABAP program?
Regards

MATMAS Inbound IDOC

Similar Messages

Maybe you are looking for