"Max simultaneous tempalate requests" is shown as "-1", set and restart yields unstable server
After CHF4 applied to CF901 (standard) and updated to run JRE7 on Windows server 2008, "Max simultaneous tempalate requests" is shown as "-1".
We checked the neo-runtime.xml and all of the limits look normal. We have no idea where does that "-1" come from.
We try setting it to a sensible value (i.e. 25) and then restart, and the CF server becomes very unstable. We couldn't even log into CF Administrator. The other live CF site would go down for a few minutes, and up again for the next few minutes. CPU activity is close to 0, RAM usage is stable. CF server logs shows nothing wrong, but http log did not get requests from IIS when it's down.
What's wrong?
Bug report filed: https://bugbase.adobe.com/index.cfm?event=bug&id=3528480
Not a good plan, IMHO.
Once that $cred object is created, the user can discover the password:
$cred.GetNetworkCredential().password
I think you'd be much better off creating a constrained, delegated remote session endpoint on a server somewhere, using the admin credentials as the RunAs account, and then creating some functions in the session to restart servers or services and limit the
session to just running those functions. You can add whatever logging you want as part of the functions, and audit using the Powershell event logs on the server.
http://blogs.technet.com/b/heyscriptingguy/archive/2014/04/02/build-constrained-powershell-endpoint-using-configuration-file.aspx
Give the users you want to be able to perform server and service restarts Execute permssions for the endpoint.
They won't have any knowledge of the admin account that's being used, and can't do anything you haven't given then a function for.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "
Similar Messages
-
(Request for:) Best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC
Could you please share your best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC, that will be running on a new WinSrv 2012 r2 host server. (This
will be for a brand new network setup, new forest, domain, etc.)
Specifically, your best practices regarding:
the sizing of non virtual and virtual volumes/partitions/drives,
the use of sysvol, logs, & data volumes/drives on hosts & guests,
RAID levels for the host and the guest(s),
IDE vs SCSI and drivers both non virtual and virtual and the booting there of,
disk caching settings on both host and guests.
Thanks so much for any information you can share.A bit of non essential additional info:
We are small to midrange school district who, after close to 20 years on Novell networks, have decided to design and create a new Microsoft network and migrate all of our data and services
over to the new infrastructure . We are planning on rolling out 2012 r2 servers with as much Hyper-v virtualization as possible.
During the last few weeks we have been able to find most of the information we need to undergo this project, and most of the information was pretty solid with little ambiguity, except for
information regarding virtualizing the DCs, which as been a bit inconsistent.
Yes, we have read all the documents that most of these posts tend point to, but found some, if not most are still are referring to performing this under Srvr 2008 r2, and haven’t really
seen all that much on Srvr2012 r2.
We have read these and others:
Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100),
Virtualized Domain Controller Technical Reference (Level 300),
Virtualized Domain Controller Cloning Test Guidance for Application Vendors,
Support for using Hyper-V Replica for virtualized domain controllers.
Again, thanks for any information, best practices, cookie cutter or otherwise that you can share.
Chas. -
This is for a duo core iMac, the initial release for duo core. The drag and drop feature had stopped working and reinstalling was recommended as a way to recover the function. ABut now the re-install is stopped at disk two, won't complete without as 4 language screen coming on saying i must shutdown.restart the computer. The computer won't accept any disk but disk two of the reinstall.Am I trapped forever? Are there keys i can hold down to ensure completion?
Whoever recommended a reinstall was talking through their hat, and wasn't trying to troubleshoot. They should have first checked if your data was backed up. If it isn't now, your drag and drop can't be completed anyway because you have a much bigger problem. 4 language screens can only be bypassed by restarting the Mac. They are known as kernel panics*:
http://www.macmaps.com/kernelpanic.html
And what you need to do is isolate the problem, not exacerbate it by adding new things to the machine. Drag and drop fails if an application doesn't support it in a particular region. Now I think the reinstall may have just filled up your hard disk and made it harder to troubleshoot. -
Embedded report engine is limited to a max of 3 simultaneous user requests
Please help me.
I currently developing an ASP.NET web application using Microsoft Visual Studio 2005 with Crystal Reports Embedded.
But found that this embedded report engine is limited to a maximum of three simultaneous user requests.
I would like to know, is it any solution for increase the amount of crystal report simultaneous user requests? Can this issues solved if we upgrade to Full Version Crystal Report?
Please help me. Thank you everyone.Hello,
3 licensing is what stays with the Engine dll and itu2019s applicable to all Crystal bundled products(CR 4 VS2010, CR 4 VS2008, CR 4 VS2005, CR 4 VS2003) and stand alone products(CRXIR2 S6, CR2008 SP3). This cannot be changed/increased until you opt for our server based products, which gives you option for increasing the licenses. You might want to contact CIC (800-677-7271) to get more details on this.
Until an existing handle on report is released from memory, the other requests cannot be taken up. So, once a report rendering is over you might want to call the ReportDocumentObject.Close(),ReportDocumentObject.Dispose() and force the GC to act. This might release the unused objects from memory and you can reuse them.
As Don suggested, if you wish, do a search on the forum threads and you will find more details and licensing guides for different products provided earlier.
As far as my knowledge goes, timeout can also be caused if your app has timeout defined or DB has a timeout setting done. You might want to check that. If you need help on timeout section, I hope you will address it in a new thread. See [rules of engagement.|http://wiki.sdn.sap.com/wiki/x/FgQ]
Thanks. -
I am on WAS 700
in SM51
--> Select Application Server
>Go to
>Server Name
>Information
>Queue Information.
The table shows table of 6 coloumns.
One of the coloumn of the table is 'Max No of Requests Wait ".
What it is ? Max number requested at peak time since system startup? 3rd Coloumn of below table?
==========================================================================
Proc Type--- Req Waiting -max req wait -Max req---Request Written --Req read
==========================================================================
DIA -
0--1384200025997052599705--
==========================================================================
RegardsHi,
As per my knowledge it is "The total number of requests waiting, since the server has been running.
For more details visit the below link http://help.sap.com/erp2005_ehp_02/helpdata/EN/69/c24e034ba111d189750000e8322d00/frameset.htm
Rgds
Radhakrishna D S
Edited by: Radhakrishna D S on Jul 10, 2008 6:30 AM -
Maximum number of simultaneous Template requests
I am running a CF-server (standard) on a
Intel(R) Xeon(R) CPU E5420 @ 2.50GHz, 8 cores
I have read somewhere on the net that you can set 8-10 maximum number of simultaneous template requests per core, which in my case
would be 64-80 simultaneous template requests.
Is that a correct assumption?
This does feel quite high considering the default value of the server is 10 simultaneous requests.
//TobyIt is the common rule of thumb, but that does not make it the correct or incorrect assumption.
What it does make is a common and usefull starting point, with the strong assumption that one will then load test ones system to make sure the setting accually works well with ones applications and hardware. And that one will then adjust accordingly based on the testing. -
Maximum number of simultaneous Template requests coldfusion 10 standard is not working
I tried to change the setting to 5 and submit changes, under request tuning setting ->
Maximum number of simultaneous Template requests is still showing as 0 even after the Coldfusion service restart.
thanksHi
In ColdFusion 10 Standard the Simultaneous requests should be equals to 10 or more than 10 however in ColdFusion 10 Enterprise there is no such restriction, the value can be of a single numeric digit as well like 5,4,6 or so on.
You can consider this as a benefit of running ColdFusion 10 enterprise
Thanks
VJ -
Hello
I have a table with name,startdate,enddate and I would like to know for today what was the max Simultaneous calls there were.
ex
Danny,'14-JUL-2008 14:35:21','14-JUL-2008 14:35:29'
Danny,'14-JUL-2008 14:35:22','14-JUL-2008 14:35:23'
Danny,'14-JUL-2008 14:35:20','14-JUL-2008 14:35:28'Based on test data from Isotope, maybe that can give you some ideas:
SQL> with t as (
2 select 'Danny' as name,
3 to_date('14-JUL-2008 11:35:21','DD-MON-YYYY HH24:MI:SS') as start_date,
4 to_date('14-JUL-2008 11:35:25','DD-MON-YYYY HH24:MI:SS') as end_date
5 from dual union all
6 select 'Danny' as name,
7 to_date('14-JUL-2008 11:35:22','DD-MON-YYYY HH24:MI:SS'),
8 to_date('14-JUL-2008 11:35:23','DD-MON-YYYY HH24:MI:SS')
9 from dual union all
10 select 'Danny' as name,
11 to_date('14-JUL-2008 11:35:26','DD-MON-YYYY HH24:MI:SS'),
12 to_date('14-JUL-2008 11:35:29','DD-MON-YYYY HH24:MI:SS')
13 from dual union all
14 select 'Danny' as name,
15 to_date('14-JUL-2008 11:35:28','DD-MON-YYYY HH24:MI:SS'),
16 to_date('14-JUL-2008 11:35:37','DD-MON-YYYY HH24:MI:SS')
17 from dual union all
18 select 'Danny' as name,
19 to_date('14-JUL-2008 14:35:21','DD-MON-YYYY HH24:MI:SS') ,
20 to_date('14-JUL-2008 14:35:29','DD-MON-YYYY HH24:MI:SS')
21 from dual union all
22 select 'Danny' as name,
23 to_date('14-JUL-2008 14:35:22','DD-MON-YYYY HH24:MI:SS'),
24 to_date('14-JUL-2008 14:35:23','DD-MON-YYYY HH24:MI:SS')
25 from dual union all
26 select 'Danny' as name,
27 to_date('14-JUL-2008 14:35:20','DD-MON-YYYY HH24:MI:SS'),
28 to_date('14-JUL-2008 14:35:28','DD-MON-YYYY HH24:MI:SS')
29 from dual)
30 -- End of test data
31 select max(count(*))
32 from (select name,
33 start_date,
34 end_date,
35 sum(interval_change) over(partition by name order by end_date, start_date) interval_no
36 from (select name,
37 start_date,
38 end_date,
39 case
40 when (lag(end_date)
41 over(partition by name order by end_date,
42 start_date) - start_date) > 0 then
43 0
44 else
45 1
46 end interval_change
47 from t))
48 group by name, interval_no
49 ;
MAX(COUNT(*))
3You can as well search this forum for term overlap to see another approaches.
Best regards
Maxim -
Your IMEI network results have returned! Your completed request is shown below:
Network Code Status:
Error: SEVER ERROR or Invalid IMEI
<Personal Information Edited by Host>Hello there tamaddon,
It sound slike we need to troubleshoot no service to your phone here. We have a great article about troubleshooting what might be causing this, named iPhone: Troubleshooting No Service found here http://support.apple.com/kb/ts4429. The symptoms in the article are a bit different to what you are experiencing but the troubleshooting is valid.
Try turning iPhone off and then on again.
Remove the SIM card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Check for a carrier settings update. Tap Settings > General > About while connected to a Wi-Fi network. If an update is available, a prompt should appear soon. If Wi-Fi is not available, connect your device to iTunes.
Update your iPhone to the latest version of iOS.
Restore the iPhone.
If you're still experiencing No Service issues, contact your carrier to check for any network or account issues that could cause this issue.
Take care,
Sterling -
Set max simultaneous downloads, max entires in downloads list
When the christ is firefox going to have a set max simultaneous downloads option in about:config at the very least? Also since there's an issue with saving files and the downloads list why isn't there an option to set max number of entires in the downloads manager list? thanks.
What then is the current position ? Is it settable within prefs but not from the User Interface. https://developer.mozilla.org/en/Mozilla_Networking_Preferences
-
MAX capcity of file can be attched and sent To IXOS server
Hi All
want to know what will be the MAX capcity of file can be attched and sent To IXOS server ?
can we contol it .
=>How we attach document
Store Business document in FD32
It in ->Go to - FD32
->On Title BAR(customer credit management change :overview) click on the ICON displayed left corner
Create - Store Business document
It is below create attachments .
Regards
SriIt could be your Proxy but in addition check this: "Limiting the Length of the Request Body"
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/25/b0a4f6f2b03a43a727a165a4d6a555/frameset.htm
I know as I had the same issue, there are no other settings that have a direct impact on the filesize for uploading. /thread/1192865 [original link is broken]
Cheers,
Benjamin -
The requested URL /Site/Home.html was not found on this server - HELP!
NOT FOUND: The requested URL /Site/Home.html was not found on this server.
This comes up when I type in my website address. I am new to this, have created my website on iweb, bought the domain name and purchased web hosting with 123-REG. I ask for their help but have only received the same rote info and nothing that has solved my problem.
I am using Cyberduck as my FTP client but tried Classic FTP for macs before this and although it says that I am connected, it is saying that it can not change to the directory hosting10.123-reg.co.uk and asks if I have permission to be using it? I am not sure what to do?
Please could someone advise me?
Thanks!Welcome to the Apple Discussions. Since you're not using MobileMe these pages might be of some help to you:
http://homepage.mac.com/thgewecke/iwebserver.html
http://iwebfaq.org/site/iWebFolderFTP.html
http://docs.info.apple.com/article.html?path=iWeb/2.0/en/6838.html
OT -
Hi All,
I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
awebsctl.log file has below errors:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
Catalog Website is working.
Thanks & Regards, KedarHi Jason,
Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
IIS Website: Default Web Site
Port Number: 80
with default value for Web Application Name configured.
For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate.
Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
For more information, refer to Microsoft Knowledge Base.
And awebsctl.log has the below error lines:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
STATMSG: ID=8100
What should I check from IIS side?
Application Catalog Website is functioning properly.
Thanks & regards,
Kedar
Thanks & Regards, Kedar -
Hi,
When trying with Postman sending a REST call to Azure Storage Queues I get:
The MAC signature found in the HTTP request '***' is not the same as any computed signature. Server used following string to sign: 'POST.
The code I have for creating the Authorization Header:
var accountName = "my_account";
string key = ConfigurationManager.AppSettings["my_access_key"];
DateTime dt = DateTime.Now;
string formattedDate = String.Format("{0:r}", dt);
var canonicalizedHeaders = "x-ms-date:" + formattedDate + "\n" + "x-ms-version:2009-09-19" + "\n" ;
var canonicalizedResource = "/my_account/myqueue/messages";
var stringToSign = String.Format("POST,\n\n\n\n\n\n\n\n\n\n\n{0}{1}", canonicalizedHeaders, canonicalizedResource);
stringToSign = HttpUtility.UrlEncode(stringToSign);
HMACSHA256 hmac = new HMACSHA256(Encoding.UTF8.GetBytes(key));
var signature = Convert.ToBase64String(hmac.ComputeHash(Encoding.UTF8.GetBytes(stringToSign)));
var authorizationHeader = String.Format(CultureInfo.InvariantCulture, "SharedKey {0}:{1}", accountName, signature);
return authorizationHeader;
Anyone any idea what I'm missing/doing wrong?
Additional question: do i have to create for every message I want to send a new Authorization header? Or is there an option (as with Service Bus Topics) to create a header that can be used for a certain timeframe?
Thanks.One issue is with this line of code:
HMACSHA256 hmac = new HMACSHA256(Encoding.UTF8.GetBytes(key));
Please use the following:
HMACSHA256 hmac = new HMACSHA256(Convert.FromBase64String(key));
and that should take care of the problem.
Regarding your question, "do i have to create for every message I want to send a new Authorization header? Or is there an option (as with Service Bus Topics) to create a header that can be used for a certain timeframe?"
With your current approach, the answer is yes. What you can do is create a Shared Access Signature on the queue which will be valid for certain duration and then use that for posting messages to a queue using simple HttpWebRequest/HttpWebResponse.
Hope this helps. -
I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT
Maybe you are looking for
-
New user. Email contacts imported to MacBook pro from PC - but I'm unable to call up entire contact list or to make a group emailing contact.
-
Problems with waveform integration
What I need to do is waveform integration from an acceleration vibration signal to a velocity or displacement signal. To take the signal to velocity, I first filter the acceleration signal (HPFilter, 5Hz) to remove any offset and the perform the inte
-
How to calc load parameters field for INSTALL for LOAD command
Hi everyone , I'll appreciate it if anyone could help me to find out how to calculate load parameters field for Install for Load Command . (which tags and parameters I should use to make this field ) Best Regards, SHKas
-
How can I combine two iTunes accounts?
I had an iTunes account at home then created another at work. How can I combine the two? When I received an iPad2 at work, I was required to have/initiate an account during the setup process. I couldn't remember what email address my personal iTune
-
How can I write outside of the targetCompositeChannels.bound?
I want to warp a layer and store the result in the targetCompositeChannels. Because the result may be so large that some pixels are outside the bound of the targetCompositeChannels, the result can not be stored completely. PS: In the sample code "Poo