Maximum length that a database table field can hold
Hello All,
I am creating a database table to store different values corresponding to a particular feature coming under different countries. Some of the values have to hold more than 700characters, which is basically like a paragraph. I have found that the maximum length a table field can hold is 255characters.
Is there any way by which i can enter more than 500 characters.
Thanks In Advance,
Shino
Hi,
If the Max length that is required is 700 characters then:
1) Isn't it possible in your case to divide the same into mutiple Fields of having 255 length each.
2) In sap there are some tables which store whole Code like table for storing Code for reports in SAP is
REPOSRC But the whole code is first stored in Hexadecimal format and not in terms of direct characters.
May be on same lines you can change the CHARACTER format and then store it and again convertt he same for further use.
You can have look into the Table REPOSRC . May be it helps.
Regards,
Vishal
Similar Messages
-
How to set the maximum length that a user can enter in Msgstyledtextinput
Hi Everyone,
I'm currently using EBS 11.5.1 and 10.2g DB
Is there a way that I can set the maximum length that a user can input?
I changed the Maximum Length to lower number (from 150 to 100) but I get the following error.
Developer Mode Exception encountered in item SaveLocation
Error: The item SaveLocation has a maximum length (100)
which is not equal to that of the corresponding VO attribute
, SaveLocation length (150).
Action: Make sure they are equal in size. There must be other way to set that value
Thanks,
ElmerYou have to set the maximum length of column to 150 to avoid this error.
You can set the same in Jdev.
Thanks
--Anil -
Looking for a value in a list stored in a database table field
Hello,
I have a field in a database table that contains a comma
separated list on numbers. In my CFQUERY I am attempting to extract
records from the database table where a parsed number is present in
the comma separated list. I have tried the code below, but it is
throwing an error.
variables.publicationID is the number that I am looking for
in the database table field.
publicationList is the name of the database table field
containing the comma separated list of numbers.
where <cfqueryparam value="#variables.publicationID#"
cfsqltype="cf_sql_integer"> in publicationList
Can anybody help?
Many thanks,
smnbinThe only way to do it with the data model you currently have
is as follows:
WHERE publicationList LIKE '#variables.publicationID#' OR
publicationList LIKE '#variables.publicationID#,%' OR
publicationList LIKE '%,#variables.publicationID#,%' OR
publicationList LIKE '%,#variables.publicationID#'
You need to check for 4 cases:
it's the only ID in the list
it's the first ID in the list
it's in the middle of the list
it's the last ID in the list.
The better solution would be to replace this comma-delimited
list with a mapping table, where each row in this mapping table
contains a reference to the main table as well as a single
publicationID. -
How do I identify the maximum length of video in iMovie which can be made into a dvd in iDVD, please?
I made a sellection of video clips > pressed on "share" > on iDVD > after one hour of formating the message was under "project duration" : "Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window."
I have edited out some of the clips and waited anothe hour or so bu the same message appeared !
I want to know in advance how long can be the video clip sellection for the quality of video chosen ( the best before HD).
please help if ou can.
thank you very much indeed.
Michael
North LondonIt's trying to tell you to change the encoding setting:
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US -
How to Transfer Database Table Field to Data Type in XI
Dear All,
Dear All,
I am working on scenario to transfer data(Database Table) from Non SAP System to SAP system through XI.
While Defining "Data Type" in XI i want to create Data Type as of Database table in my(Oracle Database).There is any direct method to import Database Table field into "Data Type" in XI.
thanks,
RPHi;
Edit plus is a tool using which you can edit your file and make changes to it.
You can download it from net ,just search for it on google.
this will help you to get in the field names of the table by editing the file .
Mudit -
What is maximum length of oracle database objects name
Hi all,
Can anyone tell me what is maximum length of oracle database objects name .
I guess it is 30 ,correct me if i am wrong thank you.
regards,
P PrakashSome objects (like synonyms or java classes) can have longer names than 30 chars:
SQL> create or replace synonym empempempempempempempempempempempempemp for emp
Synonym created.though internally oracle will generate short names for such objects:
SQL> select synonym_name from user_synonyms where synonym_name like '%EMPEMPEM%'
SYNONYM_NAME
/969ea190_EMPEMPEMPEMPEMPEMPEM
1 row selected.and not always will the long name be actually usable:
SQL> select * from empempempempempempempempempempempempemp
Error at line 1
ORA-00972: identifier is too long -
How to find out that the database table is empty
Hello all,
How to find out in ABAP in the best performant way, that the database table is empty. The table could have several milions of records or be empty. SELECT count( * ) looks to me as not the best way.
Kind regards
Radim Benek
Moderator message: FAQ, please search for previous discussions of similar topics.
example: "SELECT SINGLE" vs. "SELECT UP TO 1 ROWS"
Moderator message: Please Read before Posting in the Performance and Tuning Forum
Edited by: Thomas Zloch on Aug 11, 2011 5:06 PMHi,
One approach is:
check lt_mytable is initial.
This will be true if there are no lines.
Another:
describe table lt_mytable lines lv_count
if lv_count = 0.
"Empty
Thanks.
Anitha a -
Which table/field can indicate the localization?
which table/field can indicate the localization( us or uk or china etc)?
and which abbreviation indicate the full corresponding country name, or you direct me how to find the related resouce?
thanks in advance!Hi Lui
You can have a look in oadm, has country in there.Then in your SBO Common look at table SLSD to know which country in words and not abbreviations.
Jope this helps -
Hello,
I want to now the max. cable length that the Differential TTL signals can run in both at high and low frequencies.That is very dependant on the type of cable, its construction, and inherent impedance and capacitance. This may be of use:
http://beiied.com/PDFs2/SSI_14-15-bit-encoder_addendum.pdf
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~ -
What is the max characters memo field can hold on crystal Xi?
Post Author: chulheekim
CA Forum: General
Can anyone help me with memo field that I have on crystal XI?
I see only about 200 characters on a memo field.
what is the max characters memo field can hold on crystal XI?
I've got to bring this answer to the meeting tomorrow morning. I'm doomed.Hi Umesh,
as for as i know SAP PO system can handle the file till GB also but this will be based upon your system resources and configuration as well.
Please find the below link for further information.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2010/10/18/pixi-pi-73-processing-of-large-files--teaser
Regards,
Naveen -
What's the maximum size of data a coherence cluster can hold?
What's the maximum size of data a coherence cluster can hold before it starts noticing a degradation in performance?
Assume a partitioned topology is used with only one backup for each partition.Hi,
Coherence partitioned cache is designed for linear scalability and it does it quite well. I don't see any reasons of performance degrations with increase in data size given, you have enough cores and memory for processing the requests and managing the data.
Cheers,
_NJ -
Checking of database table field and then update that field
hello there,
In my program I want to check the field 'XRUEM' of database table MARV, If that field is check i.e. 'X' in table then I want to clear that field and then I have to proceed can anyone please guide me in this.Chetan,
Do you have to clear the field XRUEM from database table MARV if it is 'X' ???
or you just want to clear this field in the report?? Please do specify.
To clear field from database table MARV us UPDATE command (Please be careful... one should not make changes in master tables using reports)
To clear runtime contents of a filed in the report use CLEAR command.
Let me know if this doesnt clear your doubt.
Thanks. -
How to make data entries in a database table field as a hyperlink?
Hello all,
I am designing an application in BSP. The requirement is to make some of the entries in the database
tables as hyperlink values.
I have a database table which has a field "country feature". The scenario is that the user can enter any value in this field through view. The value can be a hyperlink or a free text, depending on the user requirement.
Is there any way by which the user can enter hyperlink values in the particular field in a database table?
Thanks in advance for your help.
Gurmahima.Hey Gurmahima ,
This is sample code for Selecting and deselecting all the checkboxes .
All you have to do is Set a pf-status and follow the code logic .
Here w_check is the check box field , w_line is the line your raeding and w_lines is the total number of lines(entries ) you have in table .
set pf-status 'SELECT' .
case sy-ucomm .
when 'SELECTALL' .
set pf-status 'SELECT' excluding 'SELECTALL' immediately.
w_line = w_line + 3 .
do w_lines times .
read line w_line field value w_check .
if w_check = space .
w_check = 'X' .
modify line w_line field value w_check.
add 1 to w_line .
endif . " IF W_CHECK = ' '
enddo . " DO W_LINES TIMES
clear w_line .
when 'DESELECT' .
set pf-status 'SELECT' excluding 'DESELECT' immediately.
w_line = w_line + 3 .
do w_lines times .
read line w_line field value w_check .
if w_check = 'X' .
w_check = space .
modify line w_line field value w_check .
add 1 to w_line .
endif . " IF W_CHECK = 'X' .
enddo . " DO W_LINES TIMES
clear w_line .
Hope you get it!
Much Regards ,
Amuktha .
Edited by: Amuktha Naraparaju on Feb 5, 2009 6:22 AM -
How to get the database table field names from program
Hi,
Can any one tell me,whether any function module is there which can get the table field name and its details ,when we pass database table name to it.
Thanks in Advance
<REMOVED BY MODERATOR>
Regards
Shibin
Edited by: Alvaro Tejada Galindo on Feb 14, 2008 12:41 PMHi,
DD02L Table contains the SAP Tables.
DD02T Table contains the SAP Table Texts.
DD01L Table contains the Domains
DD01T Table contains the Domain Texts.
DD03L Table contains the Table Fields.
DD03T Table contains the Table Field Texts. (Language Dependent)
DD04L Table contains the Data Elements.
DD04T Table contains the Data Element Texts.
DD05s Table contains the Foreign Key Fields
last words with L and T only. L->Database Fetch T-> Text
For ur question use table DD03L or DD03T.
Regards,
Chandru -
Database Table Fields Display - Alpha only?
When you are working with dynamic sites, and have the
database tables interface open.. if you click a table, the fields
come up in alphabetic order, rather than table order. This is very
different than most tools. Is there a way to disable the
alphabetizing and just show the table fields in table order (i.e
keys first, etc) ??
Thanks/Hi Swarna
Try this code.
DATA:
T_ITAB LIKE TABLE OF ZTABLE,
FS_ITAB LIKE LINE OF T_ITAB,
WA_ITAB TYPE ZTABLE-REVIEW_CYCLE .
SELECT * FROM ZTABLE INTO TABLE T_ITAB.
SORT T_ITAB DESCENDING BY REVIEW_CYCLE .
READ TABLE T_ITAB INTO FS_ITAB INDEX 1.
MOVE FS_ITAB-REVIEW_CYCLE TO WA_ITAB.
LOOP AT T_ITAB INTO FS_ITAB.
IF FS_ITAB-REVIEW_CYCLE EQ WA_ITAB.
WRITE:/
FS_ITAB-REVIEW_CYCLE ,
FS_ITAB-REVIEW_STEP,
FS_ITAB-GUID.
ENDIF.
ENDLOOP.
Regards
Hareesh Menon
Maybe you are looking for
-
I am trying to stop my animated gif from looping but the 'once' function won't work
HI, I have created a small animation for a web banner and I have selected it to only play once, but the export plays continuously. IS there another way of making sure it only plays once? I have got it ticked in the 'Save for Web' dialog box to only p
-
Dual Apple Cinema Studio Displays where one uses DVI-to-ADC adapter
I have an Apple Power Mac G4 MDD dual 1.25 GHz desktop with 2GB RAM running OSX Tiger 10.4. It is supporting two Apple Cinema Studio LCD flat panel 17" displays simultaneously. Currently, it has three internal hard drives and one SuperDrive. I use th
-
My Photoshop just stopped working
I do not have a disc & believe I got it when I bought this desktop in 2011. All other software in the Creative Suite works fine but Photoshop says: "Some of the application components are missing from the Application directory. Please reinstall the a
-
Hi QM Experts, In my inspection lot, even after accepting/rejecting all the characteristics the message "You have not completed all characteristics" appears. In results recording screen QE51N I see Valuation against each characteristic but the status
-
How do I place a frame around a picture?
I want to place a 3 x 5 image on a 4 x 6 photo paper with a frame around the image. Directions referenced graphics (for Holidaze), can someone help me find those? I've already cropped the image to 3 x 5 and set the canvas to 4 x 6. Thanks in advance