Maximum record limit in BW ?
Hi,
Is there any maximum limit for the number of records that can be scheduled in BW from the source system in one <b>Initialization/Full Update</b>. Any help would be appreciated.
Thanks & Regards
Hari
Hi,
I came across this information in the document 'Extraction techniques'.
"<i>With large data packages, the amount of memory required depends largely on the number of
data records that are being transferred in each particular data package. You use
these parameters to set the maximum number of data records that a data package can
contain. <b>The default setting is a maximum of 100,000 records per data pacakge.</b> The
maximum main memory requirement per data package is approximately 2'Max. Rows'1000
bytes.</i>"
I would like to know more regarding this settings.
Thanks & Regards
Hari
Similar Messages
-
Maximum record limit for internal table
hello all,
can any one tell me what is the maximum limit of internal table. i would like to add all records from bseg to internal table. so i can improve processing time.
thanks,
rajhi,
Before Release 4.0A, ABAP stored the content of internal tables in a combination of main memory and file space. This means that the maximum size of all internal tables of all programs running on such an application server at one time is about 2 GB. With Release 4.0A or greater, this size decreases to about 500 MB. (Note that those values aren't fixed, but this is a good guide. This minimum of 500 MB is the lowest limit of the real value, which varies among different operating systems and even among different releases of the same operating system.)
It may sound strange that a newer release has a higher restriction on capacity. But it's a consequence of the fact that the contents of internal tables move from a reserved file to shared memory. When you process internal tables this way in Release 4.0A or greater, you pay for much better performance with a smaller potential size.
Regards,
Sourabh -
Maximum Record limit in RDBMS adaptor
Hi,
I'm trying to find a way to limit the number of records for one message in JDBC adaptor.
This is necessary to read set of records at a time from the "sender" JDBC adaptor.
If any one knows how to do this please let me know..
Thanks
YasithaHi Shankar,
Thanks a lot for your guidance. This is working. But in this particular scenario i have another problem. What we have done is read the set of records with a Status "Yes" in to XI and change the Status to "IN" until the validations and other necessary steps are done.
This DB gets data in a very high frequency and i think between the Select and Update statements there can be changes to the TOP 500. So i was trying to Add a aditional parameter "MaximumRows" to the JDBC adapter and limit the number of records.
But that didn't work either. What do you think about this.. Do you know from where we can find information about the Additional Parameters of the Adapters.
Regards,
Yasitha. -
Set maximum record time?
Can I set maximum record time in Logic 8? Recording an hour-long live program unsupervised, & I'd like it to stop afterwards.
(I don't know any problem with continuing recording for hours until the hard drive is full? But it's not necessary.)
thanksYou can use the Auto-Punch In/Out function to set Logic stop recording automatically.
Also, set the bar value for the project end (at the transportbar, under the tempo).
For How long you can record depends on you HD capacity, but also the file format (aif,wav,caf...) the bit depth and the sample rate.
each format has its own limit.
Refer to user manual and check for the best file format for your purpose. -
How to maintain minimum price limit and maximum price limit for a condition
Hello Gurus,
Goodmorning,
How to set minimum price limit and maximum price limit for a pricing condition type where we will do this ?, is it possible to set in VK11 ?
Note- I can see minimum and maximum setting in condition type pricing - in SPRO but not seen anything in VK11 condition record maintaince . so how to maintain in condition record( VK11-Minimum limit price and Max limit price )
Looking for your inputs
Thanks in advance
Regards
Venkathi,
in VK12
select the condition record - goto blue ladder icon
there you can maintain scales
like lower limit and upper limit.
balajia -
Maximum record fetched property of block
hi friends
i have a basetable block
and i set the maximum record fetched property for this block to 1
but when i execute_query
i see all records.
can any one help me?
and i set this property ---> query array size
but it doesnot work also!!!!
tahnks
regards,
shojaThis property takes effect when the Query All Records property is set to true - and you may have to set the interaction mdoe to Non-blocking at Form mode.
A Simpler way to limit the number of rows would simply be to add
where rownum < 2 to the where clause for the block. -
Hi,
running SQL*Loader (Release 8.1.7.2.1) causes an error "SQL*Loader-704: Internal error: Maximum record length must be <= [10000000]". This error occurs when SQLLoader is trying to load several thousand records into a database table. Each record is less than 250 bytes in length.
Any idea what could cause the problem?
Thanks in advance!
Ingo
And here's an extract from the log file generated by SQLLoader :
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 1360 rows, maximum of 10485760 bytes
Continuation: none specified
Path used: Conventional
Table "SYSTEM"."BASICPROFILE$1", loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
UUID FIRST * O(X07) CHARACTER
DOMAINID NEXT * O(X07) CHARACTER
LASTMODIFIED NEXT * O(X07) DATE DD/MM/YYYY HH24:MI:SS
ANNIVERSARY NEXT * O(X07) CHARACTER
BIRTHDAY NEXT * O(X07) CHARACTER
COMPANYNAME NEXT * O(X07) CHARACTER
DESCRIPTION NEXT * O(X07) CHARACTER
FIRSTNAME NEXT * O(X07) CHARACTER
COMPANYNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
FIRSTNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
GENDER NEXT * O(X07) CHARACTER
HOBBIES NEXT * O(X07) CHARACTER
HONORIFIC NEXT * O(X07) CHARACTER
JOBTITLE NEXT * O(X07) CHARACTER
KEYWORDS NEXT * O(X07) CHARACTER
LASTNAME NEXT * O(X07) CHARACTER
LASTNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
NICKNAME NEXT * O(X07) CHARACTER
PREFERREDLOCALE NEXT * O(X07) CHARACTER
PREFERREDCURRENCY NEXT * O(X07) CHARACTER
PROFESSION NEXT * O(X07) CHARACTER
SECONDLASTNAME NEXT * O(X07) CHARACTER
SECONDNAME NEXT * O(X07) CHARACTER
SUFFIX NEXT * O(X07) CHARACTER
TITLE NEXT * O(X07) CHARACTER
CONFIRMATION NEXT * O(X07) CHARACTER
DEFAULTADDRESSID NEXT * O(X07) CHARACTER
BUSINESSPARTNERNO NEXT * O(X07) CHARACTER
TYPECODE NEXT * O(X07) CHARACTER
OCA NEXT * O(X07) CHARACTER
SQL*Loader-704: Internal error: Maximum record length must be <= [10000000]As a second guess, the terminator changes or goes missing at some point in the data file. If you are running on *NIX, try wc -l data_file_name. This will give a count of the number of lines (delimited by CHR(10) ) that are in the file. If this is not close to the number you expected, then that is your problem.
You could also try gradually working through the data file loading 100 records, then 200, then 300 etc. to see where it starts to fail.
HTH
John -
Maximum record length in internal table?
Is there a maximum record length in an internal table? Please note: My question is NOT related to table space. I'm referring only to the length of an individual record (A.K.A. row length).
I am using a work area to insert data into an internal table. Both the work area and internal table are defined by the same structure.
The structure has a total length of 672 bytes. For the sake of this discussion I'll point out that at the end of the structure, bytes 669, 670, 671, and 672 are four separate fields of 1 character each.
When viewing the work area record in the debugger I'm seeing all the fields and all the values. When viewing the internal table in the debugger after a record is inserted, the internal table ends with the field defined at Byte 670. The internal table does not include the two fields defined at Bytes 671 and 672.
Am I to assume from the above explanation that the length of a record ( A.K.A. row) in an internal table cannot exceed 670 bytes?
Thank you.Manish,
False alarm! While, technically, you didn't answer my question, your request for code ended up helping me answer my own question.
To provide you with some code I wrote a simple test program using the record layout referred to above, with a DO loop to put some records into the internal table, followed by a LOOP AT, with accompanying WRITE statements to display the contents of the internal table and demonstrate that the last two fields weren't being stored.
However, when I ran the test program, the last two fields were being displayed.
It was at that point, when stepping through the debugger that I noticed the scroll arrows above the last column of my internal table that allowed me to scroll to the right and see my final two fields.
Apparently, because of the large number of fields in my internal table I had reached the default display length of the debugger. While I was obviously aware of the scroll bar found at the bottom of the display, I had never worked with an internal table of that width in the past and hadn't even noticed the scroll arrows above the last column before.
Thanks for taking the time to respond helping me get to the solution. -
How to find Maximum Record Count in a particular section
Hi ALL
My report has 3 detail sections. I am showing different set of data in each section.
Example:
Details a
Details b
Details c
In the Details c section I have 5 columns.
I want to find out MAXIMUM RECORD COUNT in only Details c.
Actually I have done a running total on column1 field which gives me the records number in that section only. But I am not able to find the MAXIMUM record count.
Rtotal Colum1 Column 2 Column3
1 Data1 Data2 Data3
2 Data1 Data2 Data3
3 Data1 Data2 Data3
4 Data1 Data2 Data3
Now I need the Maximum record count=4
Thanks.If I have understood correctly you want to count the amount of records in each section.
In this case, go to "Insert > Summary", choose your ID field, and choose "Count" in "Calculate this summary:". You can put the summary in your group footer.
If you want the maximum (the highest number value in that column), you can choose "Maximum" instead of "Count". -
BUG: Record Limit per Document doesn't work for PDF in CS4 - does it work in CS5?
Hey all - I'm attempting to export 100 data merged documents to pdf. I know i can use "Record Limit per Document" set to 1 to create 100 InDesign files, which isn't what i want to do. When you select "Export to PDF" in the data merge window, the "record limit per document" option exists, but no matter what, it will always create one giant pdf file - it will NOT separate into 100 different pdf files. This is a bug in CS4.
I am wondering if the bug has been fixed in CS5 or if there is a workaround in CS4 to generate the pdfs.
All I found is this ancient thread in which people say the only workaround is to batch convert the pdf files later, and then degenerates into unrelated discussion:
http://forums.adobe.com/message/1110826g'day there
has there been any follow-up to this or workarounds?
i constantly have VDP jobs which have tens of thousands of records, but the chaps printing it only want the PDFs in lots of 500 or so. being able to do ONE merge which splits the merge into bite-size PDFs for our printing section would be preferable to making them through the dialog box in the appropriate lots.
colly -
Maximum Size Limit of MIME repository in ECC 6.0
Dear Experts,
I want to know the maximum size limit of MIME repository in ECC 6.0 server.
Means, up to how many MIME objects or files can i store in the MIME?
Thanks,
Praveen BitlingDear Experts,
Can anyone please answer my query?
Thanks,
Praveen Bitling -
An global maximum amount limit for single payments made via the ACH
Hi
Can any one guide how to config the gobal maximum amount limit for a single payments made via the ACH (Automated Clearing House) network.
Pl do the needful.
thank you.Hi Tony,
Not exactly the solution, but going forward you can try split the invoices and process it separately at the time of invoicing itself. Otherwise you can try the option installment payment terms, but there may be at least one day difference in payment.
Warm regards,
Murukan Arunachalam -
How many maximum records can be stored in One IDoc
Hi experts!!
Please let me know what is the maximum capacity of an IDoc. i.e.,
How many maximum records can be stored in an IDoc?
ex: abc,9807,bangalore
xyz,8976,mysore....... here two records are thr...if u have one lack records like this can we store all the records in one IDoc,....
Thanks in advance,
Sunil K ShettyHi Sunil,
Idoc structure is
1. Control record,
2. Data rord,
3. Status record.
1.Control record: contain only who is sender,who is receaver, /which type of data,Idoc number.
IT store the all control records in one table: EDIDC
2.Data Record: it contains the data records.(multiple records)
It stores the data records sre stored in one table: EDIDD
3.Status records: It show the stutus of the record. (It is multiple)
The status records are stored in one table: EDIDS
Rewords some points.
Rgds,
P.Naganjana Reddy -
Any maximum size limit to an Oracle database?
Is there a maximum size limit to Oracle database?
What is the maximum columns and rows the database can grow to?
Is there any documentation stating the max size for the Oracle database?The maximum size supported by Oracle in respect of the Oracle RDBMS is 512 Petabytes or
536,870,912 GigaBytes. This was introduced w/ Oracle Release 8.0.3 and higher. The Oracle Release 7 limit was 4 Terabytes.
Anatoli Grishin -
Hi,
I have cleared the exams 1Z0-001 Introduction to Oracle: SQL and PL/SQL & 1Z0-023 Oracle8i: Architecture and Administration in the year 2001.
Now I have cleared 1Z0-024 Oracle8i: Performance Tuning this month.
My doubt is will I be able to become OCP 8i DBA if I clear the exams 1Z0-026 Oracle8i: Network Administration & 1Z0-025 Oracle8i: Backup and Recovery or need I do 1Z0-001 & 1Z0-023 again to become OCP.
I would like to know whether there is a maximum time-limit for completing the 5 papers of OCP 8i DBA.
Thanks & Regards,
Sumughan.Looking at the source for 1.6.0_15 the default is 8192 and, other than the buffer size being greater than zero, there are no other constrains on the size so the limit will be the largest positive integer. Of course you may well run out of memory trying to allocate this amount of memory but ...
Maybe you are looking for
-
Play back for Archived audio file
First of all, forum users, please pardon my ignorance with Documentum...my first experience with this after many years in SAP. I don't see any posts or articles on this subject. I'm attaching a WMA file to Documentum. I need to be able to play that
-
Although I buried and posted the following question indirectly in a recent post, I would like to do so here to try and elevate it in the hope that I can get an answer. It is in regards to creating reports using Excel 2103 to querry Project Server 201
-
Hi, Administrator. I have posted today my first question, and got half an hour later my first -eccellent!- solution. I am very thankful to Kyrten who helped me, but an error occurs when I try to click on "solved". Just signalling , Sara
-
What files does this code need?
I am trying to use this code from Java Examples In A Nutshell. It is a short program that involves reading one and writing to another (I think!) The way I understand things is that there has to be two files for the program to be able to run, from_fil
-
Limitation in enhancement fields?
Hi all, I have enhanced 54 new fields to use in opportunity transaction using the Easy Enhancement Workbench tool. The probles is that only first 20 are shown in CRM Online, and the other remains hidden. I don't know if there is any limitation about