MDM Import manager data sources
Hi experts,
As far as I know MDM has ETL capabilities with MDM Import/syndicator tools that allows to load and extract data to and from MDM using files and relational databases as source/target.
What different kind of data sources supports MDM Import manager?
When should we work with SAP XI/PI?
When sould we work with ETL (Data Services as Data Integrator)?
Thanks in advance,
Abby
Edited by: Abigail Beurmann on Nov 23, 2011 11:38 AM
Hi Abigail,
So, Could you please tell me if it's a common practice to import data in MDM using files?
for example as you said, We want to import data from R/3 to MDM using XML files that XI/PI generates?
Yes its a common practice to import data in MDM in files.Most common mode of data exchange is xml which has many advantages namely it is accepted open standard,allows to clearly separate content from form (appearance), is text-oriented,is Secure, is extensible,is self-describing, is universal; meaning internationalization is no problem and XML is a future-oriented technology.
In our business scenario, We have a SAP CRM with SQL server 2005 as a source. Could MDM automatically import data directly from SQL Server or it's a better practice to generate XML files with PI using the Import Port/folder?
One should always use a interface as business rules can possibly change and making a later change could be huge ask.
So PI can act a interface between MDM and CRM.
CRM supports Bdoc and PI can integrate with CRM with help of ABAP Proxies.
The following thread provides you in depth information on integration of the 2 systems:
CRM-MDM Integration via XI
To help you understand more about webservice and PI integration with MDM for CRM integration please go though this thread:
SAP PI and Webservices
To know more about PI vs DS please go though this guide:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10fbac70-c381-2d10-afbe-c3902a694eaf?QuickLink=index&overridelayout=true
About Integration with PI:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/8035bf61-d6b5-2e10-5fa6-e5e00b9e6174&overridelayout=true
A guide which takes you through the entire process of CRM PI MDM integration,although for SAP MDM 5.5 version but valid for most part:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/405a73cc-9068-2c10-859e-c13f81922e7c?QuickLink=index&overridelayout=true
Hope this helps.
Thanks,
Ravi
Similar Messages
-
Identifing duplicate master data records using the MDM Import Manager
hi all
I read the Topis "How to identify duplicate master data records using the MDM Import Manager</b>"
i tried to create import maps and to set rules. but when i import them it creates the new vendor records for each rule with rest of the fields blank.
when i import vendor data all the three fields i.e Match rate , match type and match group are blank.
My Question is :
I am getting vendor data from SAP R/3.
In which source (in lookup xml file or data xml file) do i have to include these above three fields and how all the rules will be reflected in repository?Hi Sheetal
Here we go when do you Import any data (vendor master) please follow the following steps;
1. First of all apply the map to the source data
2. In the Match Record tab there are 3 possiblities
a.[Remote Key] : Checks the current source rec with
repository along with all the fields - This is
default
b.Remove [Remote key] - by double click the same; and
choose any single fields like Vendor Number or
name - Then the current record will be matched
with the repository based on the field.
c.Instead of single field you can choose combination
also.
3. Based on the Match results, match class will be set
automatically;
a. None
b. Single
c. Multiple
4. Then Match Type
a.Exact-All the individual value matches are Equal.
b.Partial-At least one value match is Equal and at least one Undefined; no value matches are Not Equal.
c.Conflict-At least one value match is Equal and at least one value match is Not Equal.
5. then chek the Import status and Execute the import.
Hope this helps you.
cheers
Alexander
Note: Pls dont forget reward points. -
Differences between various source files in mdm import manager
Hi,
Can anyone tell me the differences between the source files(access,xml,xml schema,excel) available in mdm import manager?
Thanks and regards,
Rithesh
Edited by: rithesh_shet on Mar 30, 2010 1:04 PMHi Ritesh,
MDM Import Manager provides flexibility to Import Data from different types of Sources into MDM.
You can import data into MDM from below mentioned sources using Import Manager:
1. From Files (Access, Delimited Text, Excel, Fixed Text, XML and XML Schema)
2. Directly from Data base source (SQL server and oracle)
As mentioned by Mandeep, XML Schema is something which you define in MDM console in advance. and then later select the Data source XML file and XML schema from drop down list (it will show all schema defined in console ) to validate XML source file against the XML schema.
For automated Import, Ports are used. Ports are nothing but a logical point of contact with other systems i.e. other systems or middleware will drop file on the port for authomatic import and MDM import server will scan the port directory and if file is present then will import data automatically from file into MDM using a predefine Import Map. (this map needs to be defined manually in import manager and then assigned to port using console).
Please check page no 45 of import manager reference guide for more details about various source properties of Import Manager. (*link for import manager reference guide is already provided on the earlier post)
Also check, page no 53 to 64 for how to import process. Kindly revert if you have any query.
Regards,
Shiv -
Retreive Next Source File in MDM Import Manager
Hi all,
I am curious about the above feature in the MDM Import Manager. It can be found under File menu but I found that it is always greyed out even if I have selected multiple files. When I select multiple files, the system is clever enough to take all the records in the file so it doesn't seem to be used to move from one file to another. I couldn't find any information on the Import Manager guide so am trying this forum. Note that I have also searched on the forum before posting.
Appreciate if anyone can share their insight into this feature.
Cheers!
SFHi SF,
Yes I too did not come accross any document about this.
However,I guess this is something which helps you in exception handling.
When you handle exception of a port and there are multiple files,then you need "connect to source" again and again.
It takes you to next exception file.
Hope this helps!
Thanks,
Ravi -
Importing text file (delimited, fixed width) with MDM Import Manager?
Hello all,
According to the overview section of the import manager reference guide, it is possible to import from delimited text files (e.g. CSV).
But when it comes to the details, text files are not mentioned anymore. I also found no option in the Import Manager.
Could you tell me whether this is possible and - if it is - how?
Thanks in advance!
Kind regards,
DennisHi Dennis,
In order to import flat files into MDM do the following. This solution is specific to MS Windows:
I. Set up ODBC for *.txt or *.csv files
1. Open Data Sources (ODBC) interface:
Start> Settings> Control Panel--> Administrative Tools -->Data Sources (ODBC).
2. Select System DSN Tab in Data Sources (ODBC) interface.
3. Click on [Add]. Select the Microsoft Text Driver. Click Finish.
4. Write a Data Source Name
5. Uncheck Use Current Directory to enable the [Select Directory ] button.
6. Click on [Select directory ] to determine the source directory.
7. Select the source file.
8. Click [OK] and return to the ODBC Text Setup screen.
9. Click [OK].
10. Return to the ODBC Data Source Administrator dialog and click [OK].
II. Importing from Flat file
1. Run MDM Import Manager.
2. Select ODBC from the Type drop-down field of the Connect To Source dialog.
3. Enter the DSN name from the Setup ODBC Connection dialog above.
4. Select the file name with extension (.csv or .txt) in the Tables panel of MDM Import Manager and the file content in the Records panel.
Hope this solved your problem.Please mark helpful answers
Regards,
Santosh. -
Hi everyone,
We are using the MDM Import Manager Batch to import data automatically. Can we write in our ImportBatch.ini the file name with * at the end : CREMDM.CREMDM04*.xml
because the file name comes with time stamp (CREMDM.CREMDM0420061129-103959-602.xml)
[Source]
Type=XML Schema
XML Schema=CREMDM04
File name= \...\... CREMDM.CREMDM04*.xml
DSN=
DBMS Server=
Database=
User=admin
In advance thanks,
AkliluHi Aklilu,
the names of the XML files don't matter. MDIS tries to process everthing that is put into the ready folder. The ready folder is processed in a "first comes, first served" way. So there's no need to change the names. Is the time stamp in the file name really a problem? If yes, why?
> We are trying to parameter the mdis.ini and until now it does not work.
Could you specify this? In addition, I've got a few hints:
MDIS has to have the same build version as the MDM Server. In addition, MDIS has to be running (in Windows, you can check this in the Services Screen). Furthermore you should have a look at the Console's port definition (select your repository, go to Admin -> Ports in the menu tree). The port has to be configured correctly (XML Scheme, which map to be used, and so on). Very important: you have to set the port to automatic processing.
Here's a sample for the MDIS.ini:
[GLOBAL]
Version=5540
Server=WDFD00146633A
Interval=30
Automap Unmapped Value=True
Unmapped Value Handling=Add
Always Use Unmapped Value Handling=False
VXR_MAX=25000
Verbose=0xFFFF
-- Verbose OFF: 0x0000
-- Verbose ON: 0xFFFF
-- FI Verbose: 0x0001
-- XML Verbose: 0x0002
-- MAP Verbose: 0x0004
-- THRD Verbose: 0x0008
-- PARSER Verbose: 0x0010
-- STRUCTX Verbose: 0x0020
-- VALUEX Verbose: 0x0040
-- IMPORTX Verbose: 0x0080
String Resource Dir=C:PROGRA~1SAPMDM~1.5IMPORT~2LangStrings
Log Dir=Logs
SLD Registration=False
[SP04_BUSINESS_PARTNERWDFD00143366AMSQL_21_13_4_3]
Login=Admin
Password=
Chunk Size=50000
No. Of Chunks Proccessed In Parallel=5
Using the Verbose parameter you can define which errors, issues, messages and so on should be written into the MDIS log. You can find the logs directly in the port's log folder and in the log folder of your MDIS installation directory. If MDIS is not working or the import fails, these files contain some helpful information.
Kind regards
Michael -
What is meant by criteria of Updateability in MDM Import manager
Hi,
What is meant by criteria of Updateability in MDM Import manager? i read some information, but i could understand, it says original data source be updateble. what is meant by Original data source.?
what is the use of option "Read-only" in Import manager logon screen.
ThanksHello Ankam,
You can check the Read-only option to prevent MDM from updating your data source.
Kindly see the below information on "DATA SOURCE UPDATES"
DATA SOURCE UPDATES
Some MDM Import Manager operations require that the original data source be updateable, thereby allowing new fields and/or entire new tables u2013 and the corresponding data values for each record u2013 to be automatically added to the data source before further processing.
Other operations simply create virtual fields in the MDM Import Manageru2019s workspace, although if the data source happens to be updateable, some of these operations instead add the new fields to the original data source as well.
NOTE ►► Updating the data source when possible allows you to
perform additional operations on the new fields as if they were part of
the original source data, and also use them as record matching fields.
NOTE ►► Fields that are added only if the data source is updateable
can be deleted automatically by the MDM Import Manager when you
exit or switch data sources based on the setting of the Delete Created
Fields on Exit configuration option.
Updateable Data Sources
Whether or not a data source is updateable depends upon the following:
u2022 Source type. The source Type must permit the MDM Import Manager to update its schema and insert the additional fields of data; some supported types are updateable and some are not.
u2022 Media. The media on which the data source resides must itself be updateable. If the media on which the data source resides is readonly, such as a CD-ROM, the data source cannot be updated.
u2022 Permissions. You must have the proper file system permissions to update the file, or the proper DBMS permissions to update the schema of the database.
u2022 Read-only option. You cannot have checked the Read-Only option, which prevents MDM from updating the data source even if the other conditions would otherwise permit it.
NOTE ►► The Read-Only option is: (1) enabled for source types that
can be updated (Access, Oracle, SQL Server, and XML); (2) disabled
and unchecked for those that use Access as an updateable staging
area (Delimited Text and Fixed Text); and (3) disabled and checked for
those that cannot be updated (Excel and ODBC).
NOTE ►► When the data source is SQL Server, the table names in
the database must not contain spaces; otherwise any operation that
would update the data source will fail.
Hope this helps.
Regards,
Vikas -
SAP MDM Import Manager connect to Oracle Database.
Hi expert,
I try to connect to Oracle DB with SAP MDM Import Manager but I cant.
I entered property in "Connect to Sorce" window.
============================================
Type : Oracle
Remote system : MDM
DBMS server : <DBMS host>:<listener port>
Database : Oracle_SID
User : Oracle database user
Password : Oracle database user password
============================================
then error ocurred.
"Unable to connect to source"
I aleady checked to connect to the Oracle database with Oracle client.
It is connected well.
How can I connect ??
thanks and regards
junHi all,
thank you for your replies.
I tried to connect oracle DB except "< and >" symbol but It did not work.
I installed windowXP 32bit , Oracle client 32bit and SAP MDM Import manager 32bit in My local PC.
Also I connect to MDM DB using sqlplus in My local PC.
I wonder that TNSNAME.ORA is used DB connection using SAP MDM Import manager ??
I think TNSNAME.ORA is not used when I connect to DB using SAP MDM Import manager because I enter parameters are properties of TNSNAME.ORA.
I don`t know why don`t connect to DB.
regards,
jun -
Security around MDM Import Manager/Syndicator
Hi -
I am trying to see if there is any way within the MDM 5.5 SP6 to limit the use of the Import Manager and Syndicator. I did some testing and found that users assigned with roles that have Read-Only access to all tables/fields and no Execute access for any functions were able to log in to Import Manager and import data to the repository.
I also found this in the Import Manager reference guide.
NOTE ►► Currently, the MDM Import Manager does not check any
security constraints set in the MDM Console. Specifically, with the
following exceptions: (1) the import will fail if any record constraints are
set for the import user; and (2) you must have write access to the
Family Hierarchy if the Synchronize Family Hierarchy After Import
configuration option is set to Yes.
I'm guessing not, but does anyone know if there is any way within MDM to restrict the use of these applications? And if no, any ideas on if/when SAP is going to do incorporate security constraints with these applications?
Thanks,
MattHi Matt,
I was just thinking that if none of the users should Import , then how they can accidently import records. They simply wont have Import Manager GUI.
So no need to worry for the project.
However you raised a good point and it will be good if SAP will come up with solution for it.
+ An -
MDM Import Manager - remove multiple values from a multi valued fiedl
Hi,
We have this multi-valued field and we would like to clean the values from it.
How can we do this using MDM Import Manager?
Example:
Article A
Field XPTO has values Z, T and P.
We want this field XPTO with no values. How can we do a mass actualization to clean the field for some articles?
Thanks and regards,
Maria*We have this multi-valued field and we would like to clean the values from it.
How can we do this using MDM Import Manager?
Example:
Article A
Field XPTO has values Z, T and P.
We want this field XPTO with no values. How can we do a mass actualization to clean the field for some articles?*
Hi Maria,
There can be multiple ways to achieve this -
1.After doing field mapping for XPTO you can set conversion filter for each of the values.
2.Value map with NULL.
3.Trigger a Workflow on import/record add,run assignment and make that field NULL.
4.Run mass update for conditional assignment based on that value of XPTO.
There can be more ways,whichever suits you best you can go ahead with that.
Hope it helped
Regards,
Ravi -
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us -
Hey everyone, So I am trying to get a report onto the server, and in BIDS I kept getting a login screen repeating over and over when I tried to deploy my report, so I tried to upload the file at http://<servername>/Reports This worked, but then trying
to run this report from http://<servername>/Reports did not work either because "An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'FTYDataSource'. (rsErrorOpeningConnection) For more information
about this error navigate to the report server on the local server machine, or enable remote errors" Anyways I tried to add a New Data Source (which I would use in the report) at http://<servername>/Reports, type ODBC, with the connection string Dsn=blah_blahblah.
I try to test the connection here and get the error ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This is really getting old fast, everything I try, a new error comes up. Granted I am new at this,
but this still should not be this troublesome. Does anyone have any ideas on what could FINALLY allow me to just put a report out onto the server?!? THANK YOU in advance for ANY help.Hi,
Please try setting the credentials of the datasource.
1. Double click and open the datasource in your project.
2. Click on the credentials tab, and click on option button 'Use this username and password'
3. Enter the username and password to connect to the datasource
4. Deploy or upload the datasource to the report server and try accessing the reports.
Hope this helps.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH -
How to save the setting in MDM import manager?
How to save the setting in MDM import manager? After I configure all things in MDM import manager, I try to save the setting, let's say, saved map name is " Test002", and then I export this map into desktop. After that, I logon Import manager again, and import this map file, system show me the same thing that I have to configure it again, because nothing was changed, what I configured before, were all disappeared.
Hi Alfred ,
are You not saving this map in Import Manager ? Import Manager itslef saves the map and remember it . Exporting map is only for backup .
Pls make changes and save the map . Exit and relogin . then see the map . It should be there . Pls let us know the result .
- An -
Hi I have SQL2012 installed on my local machine and have also installed MySQL 5.6.23 installed with a test database.
I also have my SQL connector installed and MYSQL ODBC Driver 3.51.
Which happily connects to the Mysqldb.
The Datasource Name : mySQL conn
TCP/IP Server : localhost and Port :3306
User root
with pwd
On the SQL side I have used the following
EXEC master.dbo.sp_addlinkedserver
@server = N'MYSQLSRV',
@srvproduct=N'mySQL conn',
@provider=N'MSDASQL',
@datasrc=N'mySQL conn'
However when I try to selet using open query
SELECT * FROM OPENQUERY ( [MYSQLSRV], 'SELECT * FROM students' )
it comes back with
OLE DB provider "MSDASQL" for linked server "MYSQLSRV" returned message "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "MYSQLSRV".
I cant understand what I have done wrong . Any help in this would be great as Ive hit a bit of a brick wallHi Robert3975,
In addition to other post, please also note the following things.
1. If you use the 32-bit driver on a 64-bit machine, please run the 32bit version of "odbcad32.exe" by running "c:\Windows\SysWOW64\odbcad32.exe"
from Start/Run menu and
create your ODBC DSN. However, for the 64-bit driver, use c:\windows\system32\odbcad32.exe to create your ODBC DSN. For more details, please review this similar
thread.
2. Expand the folder Providers under Linked server directory in SSMS and go to properties of MSDASQL provider and configure it properly as described in this blog:
Creating Linked server to MYSQL from SQL Server.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support -
Hi,
I'm running
Red Hat Linux 5, MySQL and BOXI 3.1
I try and schedule a report in the CMC and the report fails with the error
A database error occured. The database error text is: {Driver Manager} Data source name not found, and no default driver specified. (WIS 10901)
I've went through the steps in the Bus Obj's Documentation outlining how to install the unixODBC (though this doco was for R2 - I'm not certain whether this install is needed for 3.1).
Error WIS 10901 details
Database error: . Contact your administrator or database supplier+
for more information. (WIS 10901)
The database that provides the data to this document has generated an error.
Cause
Details about the error are provided in the section of the message indicated
+by the field code: .
Contact your BusinessObjects administrator with the error message
Action
information or consult the documentation provided by the supplier of the
database.
Any pointers suggestions on how to set up correctly the unixODBC will be looked into.
Thanks for taking the time to view this post.
CheersHi again Aravind,
I hope you're not beginning to wish you had never answered that first question from me since it seems as if I'm now backing up the truck with regard to the entire question. If I'm asking too much from you let me know I don't wanna overstep the line with repect to what should and shouln't be asked in these forums'
anyway I looked in that env.sh script. It was huge (pity I can't attach the file, I've appended it but it makes these threads somewhat lengthy)
DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
export DEFAULT_ODBCFILE
+ODBC_HOME="$odbc"+
export ODBC_HOME
also
# setup the mysql env variables
if [ -d "$BOBJEDIR"/mysql ]; then
# mysql env variables
set up the odbc symlink to work around:*
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a*
locale other than "en_US" due to strong dependencies on their locale files.*
MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
export MYSQL_UNIX_PORT
We want to be able to source the config file multiple times.
fi
if [ -d "$BOBJEDIR"/tomcat ]; then
set the JAVA_OPTS for tomcat
I see what you were referring to earlier with
if [ -d "$ODBC_HOME/locale" ]; then
the javascript files are kept here
The machine name
The user name
MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`The default registry
if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
fi
fi
Again cheers for your help in this matter.
#!/bin/sh
BOBJEDIR="/home/eberwick/BO_3_1/bobje/"
export BOBJEDIR
BODIR="`dirname $BOBJEDIR`/"
export BODIR
DEFAULTFILE="$
check for existence of u flag, if it is there, turn it off.
Set a flag so we don't source the environment more than once
webi config file
ccm.config"
if [ -f "$DEFAULTFILE" ]; then
. "$DEFAULTFILE"
fi
. "${BOBJEDIR?}setup/modify_ko_locale.sh"
SOFTWARE=`uname -s`
OBJECT_MODEL=`grep Platform $BODIR/setup/ProductID.txt | awk '{print $4;}'`
[ -z "$OBJECT_MODEL" ] && OBJECT_MODEL=32
SOFTWAREPATH=`grep SoftwarePath $BODIR/setup/ProductID.txt | awk '{print $3;}'`
U_FLAG=0
if [ X"$SOFTWARE" = "XHP-UX" ]; then
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
raise the ulimits to max allowed
undo that bug workaround from above
figure out what architecture we're on
now that we're localized, deal with unknown architecture
we include English, as localization may have failed
set the JDK variable
if [ x`echo $- | grep "u"` != "x" ]; then
set +u
U_FLAG=1
fi
fi
if [ x"$BOBJE_ENV_SOURCED" = x ]; then
if [ -f "$setup/boconfig.cfg" ]; then
HKEY_LOCAL_MACHINE="$setup/boconfig.cfg"
export HKEY_LOCAL_MACHINE
fi
BOBJE_ENV_SOURCED="true"
export BOBJE_ENV_SOURCED
BOBJEVERSION="12.0"
export BOBJEVERSION
LANGWAS="$LANG"
unset LANG
LC_ALLWAS="$LC_ALL"
unset LC_ALL
ulimit -Sn `ulimit -Hn` # max file descriptors
ulimit -S -c `ulimit -H -c` # max core file size
ulimit -S -d `ulimit -H -d` # max data segment size
ulimit -S -f `ulimit -H -f` # max file size
ulimit -S -s `ulimit -H -s` # max stack
ulimit -S -t `ulimit -H -t` # max CPU time
LANG="$LANGWAS"; export LANG
unset LANGWAS
LC_ALL="$LC_ALLWAS"; export LC_ALL
unset LC_ALLWAS
case X"$SOFTWARE" in
XLinux) SOFTWARELC="linux"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12" ;;
XAIX) SOFTWARELC="aix"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX=".12.0${SHAREDLIBSUFFIX?}"; CB1SYMLINKLIBSUFFIX=".12${SHAREDLIBSUFFIX?}";;
XSunOS) SOFTWARELC="solaris"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
XHP-UX)
SOFTWARELC="hpux";
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
SHAREDLIBSUFFIX=".so";
else
SHAREDLIBSUFFIX=".sl";
fi
CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0";
CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
esac
export SOFTWAREPATH
export SOFTWARE
export SHAREDLIBSUFFIX
export CB1LIBSUFFIX
export CB1SYMLINKLIBSUFFIX
if [ "$SOFTWAREPATH" = "" ]; then
echo "$UNKNOWNPLATFORM (unknown platform): $SOFTWARE"
exit 1
fi
if [ -d "$BOBJEDIR"/jdk ]; then
JAVA_HOME="$jdk"
export JAVA_HOME
fi
JAVA_OPTS="-d$OBJECT_MODEL -Dbobj.enterprise.home=$
fi
setting AAHOME here so when CAD starts the value is set
enterprise120 -Djava.awt.headless=true -Djava.net.preferIPv4Stack=false"
if [ "$SOFTWARE" = "AIX" -o "$SOFTWARE" = "SunOS" -o "$SOFTWARE" = "Linux" -o "$SOFTWARE" = "HP-UX" ]; then
JAVA_OPTS="$JAVA_OPTS -Xmx1024m -XX:MaxPermSize=256m"
fi
export JAVA_OPTS
if [ -d "$Dashboard_Analytics_120" ]; then
AAHOME="$Dashboard_Analytics_120"
export AAHOME
fi
WCSDIR="$enterprise120/$SOFTWAREPATH/wcs/"
export WCSDIR
WCSBINDIR="$bin/"
export WCSBINDIR
WCSCOMPONENTDIR="$components/"
export WCSCOMPONENTDIR
BINDIR="$enterprise120/$SOFTWAREPATH/"
export BINDIR
LIBDIR="$enterprise120/$SOFTWAREPATH/"
export LIBDIR
PLUGINDIR="$enterprise120/packages/"
export PLUGINDIR
PLUGINDIST="$enterprise120/$SOFTWAREPATH/plugins/"
export PLUGINDIST
LOGDIR="$append the new valuelogging/"
export LOGDIR
if [ x"$BOE_LOGGER_ENVIRONMENT" = x ]; then
BOE_LOGGER_ENVIRONMENT="-loggingPath $LOGDIR"
else
BOE_LOGGER_ENVIRONMENT="$BOE_LOGGER_ENVIRONMENT -loggingPath $LOGDIR"
fi
export BOE_LOGGER_ENVIRONMENT
SCRIPTDIR="$enterprise120/generic/"
export SCRIPTDIR
JAVASCRIPTDIR="$setup/jscripts/"
export JAVASCRIPTDIR
MACHINENAME=`uname -n`
export MACHINENAME
removeUTF8SpecificsForKorean
STRIPPEDMACHINENAME=`hostname | sed -e 's/\..*//'`
export STRIPPEDMACHINENAME
if [ x"$BOBJEUSERNAME" = x ]; then
BOBJEUSERNAME=`id | sed -e "s|).\$||" -e "s|^.(||" `
export BOBJEUSERNAME
fi
restoreUTF8SpecificsForKorean
DEFAULT_REGFILE="$BOBJEDIR"setup/.defaultreg
export DEFAULT_REGFILE
REGFILE="$BOBJEDIR"data/.bobj
export REGFILE
BOE_REGISTRYHOME="$REGFILE/registry"
export BOE_REGISTRYHOME
DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
export DEFAULT_ODBCFILE
ODBC_HOME="$odbc"
export ODBC_HOME
the PID file location
PIDDIR="$BOBJEDIR"serverpids
export PIDDIR
SQLRULEDIRECTORY="$LIBDIR"
export SQLRULEDIRECTORY
PATH="$BINDIR:$crpe/xvfb:$PATH"
export PATH
CRPEPATH="$enterprise120/$SOFTWAREPATH/crpe/"
export CRPEPATH
MWHOME="$mw/"
export MWHOME
BOBJEXVFBPATH="$xvfb/"
export BOBJEXVFBPATH
MWUSER_DIRECTORY="$once the crpe is in, we should exit if this file doesn't exist.
Uncomment this to turn off Xvfb security and allow connections from
everyone.
MW_XVFB_AC="1"
export MW_XVFB_AC
Use a seperate .Xauthority file. Comment out this line if you want
to use the user's .Xauthority file for storing the Xvfb authentication
tokens.
registry/"
export MWUSER_DIRECTORY
MWRT_MODE="professional"
export MWRT_MODE
MWREGISTRY=":$MWUSER_DIRECTORY/hklm_$
Mainwin can deadlock unless this is set
Prevents Mainwin from popping up dialogs in some situations, causing a deadlock
variables merged from RAS
XVFB Manager
Environment Variables:
MW_XVFB_EXE = Name of the Xvfb exe.
Default is 'Xvfb'.
MW_XVFB_DAEMON = Name of the XvfbDaemon exe.
Default is 'XvfbDaemon'.
MW_XVFB_DAEMON_PORT = Port number that Xvfb Daemon will listen too.
Default is 5222.
MW_XVFB_DAEMON_HOST = Host on which the XvfbDeamon is running.
Default is Local host.
MW_XVFB_DAEMON_XVFB = Number of Xvfb to run.
Default is '5'.
MW_XVFB_DAEMON_DISPLAY = Starting display number for Xvfb.
Default is '1'.
MW_XVFB_DAEMON_PROFILE = Path to the Security Profile for Xvfb.
Default is 'SecurityProfile'.
MW_XVFB_DAEMON_TRACE = Set to turn on tracing information.
Default is undefined.
MW_XVFB_DAEMON_DIE = Turn off the exit code if no more connections.
Default is undefined.
MW_XVFB_FONT = Locations from which to load font
By this symbol being defined, the checking for a current set display is disabled.
Set to turn on tracing info when defined. Default is undefined.
MW_XVFB_DAEMON_TRACE=defined
export MW_XVFB_DAEMON_TRACE
RAS Home
.bin"
export MWREGISTRY
MWCORE_PRIVATE_DATA="$MWUSER_DIRECTORY/core_data"
export MWCORE_PRIVATE_DATA
if [ -f "$MWHOME"setmwruntime ]; then
. "$MWHOME"setmwruntime
fi
MWNT_OLE_DOCS=true
export MWNT_OLE_DOCS
MWPRINTER_DPI=600
export MWPRINTER_DPI
MWVISUAL_CLASS="TrueColor"
export MWVISUAL_CLASS
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
MWTHREAD_STACK="200000"
else
MWTHREAD_STACK="FA000"
fi
export MWTHREAD_STACK
MWFONT_DIR_PATH="$fonts/"
export MWFONT_DIR_PATH
MW_XVFB_DAEMON_FONT="$misc/"
export MW_XVFB_DAEMON_FONT
XAUTHORITY="$xvfb/.Xauthority"
export XAUTHORITY
MWDEBUG_LEVEL=0
export MWDEBUG_LEVEL
MWINVISIBLE_DISPLAY=1
export MWINVISIBLE_DISPLAY
MWNO_SIGCHLD_IGNORE=1
export MWNO_SIGCHLD_IGNORE
MWLOOK=motif
export MWLOOK
MW_XVFB_DAEMON_PROFILE="$BOBJEXVFBPATH/SecurityPolicy"
export MW_XVFB_DAEMON_PROFILE
MW_XVFB_DAEMON_IGNORE_DISPLAY="true"
export MW_XVFB_DAEMON_IGNORE_DISPLAY
if [ "$SOFTWARE" = "HP-UX" ]; then
MW_XVFB_DAEMON_XVFB=10
else
MW_XVFB_DAEMON_XVFB=5
fi
export MW_XVFB_DAEMON_XVFB
MWNO_FILE_LOCKING=true
export MWNO_FILE_LOCKING
MWNO_SIGNAL_CATCHING=true
export MWNO_SIGNAL_CATCHING
RASHOME="$enterprise120/$SOFTWAREPATH/ras/"
export RASHOME
LIBRARYPATH="$LIBDIR:$WCSCOMPONENTDIR:$PLUGINDIST/auth/secEnterprise:$enterprise120/$SOFTWAREPATH/crpe:$:$PLUGINDIST/desktop/CrystalEnterprise.Report:$enterprise120/$SOFTWAREPATH/ras:$
May optionally be set to MALLOCMULTIHEAP=heaps:n[,considersize]
where n is scaled to the number of CPUs (usually 2x).
Setting to MALLOCMULTIHEAP=1 enables system defaults.
setting MALLOCMULTIHEAP to 'considersize' fixes an AIX memory leak and significantly reduces the memory footprint.
env variable to fix the default cpu affinity
env variable to fix dlopen/dlclose behaviour to be more like ELF-based systems
aix thread stack overflow guarding : won't catch if overflow is more than 4k, but better than nothing
aix specific ulimit changes
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
undo that bug workaround from above
set the aix thread scope to system (1:1)
better core naming for aix 5
Check if memory windows is enabled in the kernal parameters
We will support memory windows, either through the "BOE120_HP_MEMWIN_ID" environment variable,
or through the "BusinessObjectsEnterprise120" memory window key in /etc/services.window
Use memory windows if available on HP-UX.
For both HPUX Itanium and PA-RISC
Reduce the number of arenas from 8 (default) to 1 (min) which solves memory blowup issue.
Enable the thread local cache to compensate.
http://www.docs.hp.com/en/B2355-60130/malloc.3C.html
mysql/lib"
if [ "$SOFTWARE" = "AIX" ]; then
LIBPATH="$LIBRARYPATH:$LIBPATH"
export LIBPATH
if [ x"$MALLOCMULTIHEAP" = x ]; then
CRConfig env variable for DCP
MALLOCMULTIHEAP="considersize"
export MALLOCMULTIHEAP
fi
RT_GRQ=ON
export RT_GRQ
LDR_CNTRL=IGNOREUNLOAD
export LDR_CNTRL
AIXTHREAD_GUARDPAGES=1
export AIXTHREAD_GUARDPAGES
LANGWAS="$LANG"
unset LANG
LC_ALLWAS="$LC_ALL"
unset LC_ALL
ulimit -S -m `ulimit -H -m` # max memory
LANG="$LANGWAS"; export LANG
unset LANGWAS
LC_ALL="$LC_ALLWAS"; export LC_ALL
unset LC_ALLWAS
AIXTHREAD_SCOPE="S"
export AIXTHREAD_SCOPE
Version=`uname -v`
Release=`uname -r`
if [ "$Version" -gt 4 ]; then
CORE_NAMING=ON
export CORE_NAMING
fi
AIXTHREAD_MUTEX_DEBUG=OFF
export AIXTHREAD_MUTEX_DEBUG
AIXTHREAD_COND_DEBUG=OFF
export AIXTHREAD_COND_DEBUG
AIXTHREAD_RWLOCK_DEBUG=OFF
export AIXTHREAD_RWLOCK_DEBUG
elif [ "$SOFTWARE" = "HP-UX" ]; then
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/IA64W.0/server"
else
SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/PA_RISC2.0/server"
fi
export SHLIB_PATH
MAX_MEM_WINDOW=`/usr/sbin/kctune | grep max_mem_window | awk '{print $2}'`
if [[ "$MAX_MEM_WINDOW" != "0" ]]; then
if [[ "$BOE120_HP_MEMWIN_ID" = "" && -r "/etc/services.window" && -x "/usr/bin/getmemwindow" ]]; then
BOE120_HP_MEMWIN_ID="`/usr/bin/getmemwindow BusinessObjectsEnterprise120`"
export BOE120_HP_MEMWIN_ID
fi
if [[ -x "/usr/bin/setmemwindow" ]]; then
if [[ "$BOE120_HP_MEMWIN_ID" != "" ]]; then
CE_CMDLINE_PREFIX="/usr/bin/setmemwindow -f -i $BOE120_HP_MEMWIN_ID "
fi
fi
export CE_CMDLINE_PREFIX
fi
export MARENA_OPTS=1:8
export MCACHE_OPTS=100:8:0
elif [ "$SOFTWARE" = "Linux" ]; then
LD_LIBRARY_PATH="$LIBRARYPATH:$perl/lib/5.8.0/i386-linux-thread-multi/CORE:$LD_LIBRARY_PATH"
export LD_LIBRARY_PATH
else
LD_LIBRARY_PATH="$LIBRARYPATH:$LD_LIBRARY_PATH"
export LD_LIBRARY_PATH
fi
CRCONFIGFILE="$java/CRConfig.xml"
if [ -f "$CRCONFIGFILE" ]; then
CRConfig11="$CRCONFIGFILE"
export CRConfig11
fi
if [ -d "$ODBC_HOME/locale" ]; then
set up the odbc symlink to work around:
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a
locale other than "en_US" due to strong dependencies on their locale files.
MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`
if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
fi
fi
This was originally called TMPDIR, but now MainWin supports MW_TMPDIR, so we export MW_TMPDIR
ADAPT00506764 tracks the original issue with TMPDIR/Essbase Connectivity
MySQL now sets its TMPDIR in mysqlstartup.sh
set the tmp dir locally, if the value is not already set.
if [ x"$MW_TMPDIR" = x ]; then
if [ ! -d "$BOBJEDIR"/tmp ]; then
mkdir -p "$BOBJEDIR"/tmp
fi
MW_TMPDIR="$BOBJEDIR"/tmp
export MW_TMPDIR
fi
Comment this out to turn off custom Solaris memory allocator
if [ "$SOFTWAREPATH" = "solaris_sparc" ]; then
LD_PRELOAD="libhoard.so.1"
export LD_PRELOAD
Need to set up 64-bit specific library path so that 64-bit processes will
preload the 64-bit version of the memory allocator, and not the 32-bit version
LD_LIBRARY_PATH_64="$enterprise120/solaris_sparcv9"
export LD_LIBRARY_PATH_64
fi
setup the mysql env variables
if [ -d "$BOBJEDIR"/mysql ]; then
mysql env variables
MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
export MYSQL_UNIX_PORT
fi
call env.sh from sub-directories (presumably from add-on installs)
for dir in "${BOBJEDIR?}/setup"/*
do
if [ -r "${dir?}/env.sh" ]; then
. "${dir?}/env.sh"
fi
done
fi
if [ X"$SOFTWARE" = "XHP-UX" ]; then
check for existence of u_flag, if it is, turn it back on.
if [ "$U_FLAG" = 1 ]; then
set -u
fi
fi
Maybe you are looking for
-
Purpose of REQUEST field in SCREEN table
HI Everyone, Could someone explain me the purpose of the field REQUEST in the screen table with an example if possible? Thanks in advance.
-
Double click instead of single click
recently like a month ago i started noticing when i ried to open a new tab in firefox or close,i opened two new tabs or close two tabs then i found out it wasn't firefox is that when i single click on something i guess ny computer recognizes that as
-
Can emails be password protected?
Is it possible to password protect emails within Mail so that a password is required to open all mail?
-
How to transfer photos from my PC to ipad air
how to transfer photos from windows pc to ipad air?
-
good morning.... could someone please help me with some coding for the following program... i need a text box that i can enter a customers name into that then will search the database and display the appropriate record.. i have written the following