MDM Lock command giving error MDMClientError:71 on Mavericks

I registred OSx 10.9 to my MDM server and installed MDM profiles successfully and when i send a lock command to the device it is not locking the device and i could see the below error in system.log file:
*** ERROR *** [Agent:501] ### Errors while processing: DeviceLock ###
*** ERROR *** [Agent:501] <MDMClientError:71> Command received for: <User: 503> but restricted to: <Device> <MDMClientError:71>
The same command is working fine in OSx 10.7/10.8 and iOS devices. I tried on different 10.9 systems but failing on all the devices with same error.
Not sure what went wrong, does mavericks need any configurations/settings tobe changed? Anyone faced this issue any time??
Any suggestions will be highly appreciated.

below is the correct error log :
*** ERROR *** [Agent:501] ### Errors while processing: DeviceLock ###
*** ERROR *** [Agent:501] <MDMClientError:71> Command received for: <User: 501> but restricted to: <Device> <MDMClientError:71>

Similar Messages

MDM Database command execution error. A SQL statement failed to execute

Hi,
When we tried to execute an MDM Java query modify/create, we get the following dump.
Is this anything to do with the parameters that we pass or is it something to do with the database ?
We have checked the code and we do not find anything wrong with the code at all.
We are using Java API 5.5.63.73 and calling MDM API's using WebDynpro for Java.
I have noticed this issue has been raised here as well :
Database command execution error. (While mounting a repository)
com.sap.mdm.commands.CommandException:
com.sap.mdm.internal.protocol.manual.ServerException: Database command execution error. A SQL
statement failed to execute. The actual error may have been written to a log file. at
com.sap.mdm.data.commands.ModifyRecordCommand.execute(ModifyRecordCommand.java:163) at
Regards,
Subramanian V.
Edited by: Subramanian Venkateswaran on Dec 10, 2008 8:11 PM

Hi Subramanian ,
The error looks more like a problem with the data base or MDM system rather than the java code.
Which is the underlying database you are using with MDM? As some users have faced some difficulties when working with the DB2 Data base,If this is the data base you too are working upon then may be the issue could be similar,if possible try using the Oracle or SQL data base as these databse show more compatibility than a DB2 when working with MDM .
Also check the MDM users autorization and authentication to modifyor create recordrs in MDM.try given the user the ADMIN rights,and tehn try and see if teh user is able to modify/Create the mdm records.
Lastly you can check the database instance and listener configuration correctly.try restarting the Database service form the system if possible.
Hope It Helped
Thanks & Regards
Simona Pinto

Alter rollback segment command giving error.

Hi all ,
i am novice to Oracle 9i i am altering rollback segment but getting following error messages.
ORA-30021: Operation not allowed on Undo Tablespace
ORA-25150:Altering of extent parameters not permitted
(in this i am trying to alter maxextents parameter of rollback segment )

Apparently you are using undo segments, as opposed to rollback segments.
You should use undo segments, and they are located in a separate undo tablespace (see the first error message)
Oracle manages the undo tablespace. You can't do anything about it.
However, Oracle is still using 'rollback segment' and 'undo segment' interchangeably.
Likely, your rollback segment is an undo segment, and you can not change it, nor do you need to.
Sybrand Bakker
Senior Oracle DBA

How do I remote query and pass remote lock command using MDM

How I can pass remote query and remote lock command to target iPhone using MDM?
regards
Jeet

Don't use Runtime.exec (or ProcessBuilder) for this. Check out JSch at JCraft (or some other Java SSH API.

Database command execution error. (While mounting a repository)

Hello,
I am trying to mount 'Customer Master' repository in Console
But it is giving me the following error.
'Database command execution error. A SQL statement failed to execute. The actual error may have been written to a log file.'
Can any1 throw some light as to how do i solve this problem.
And where to check this log file?
Also i am able to mount any other repository without this error.
Regards,
Roshani

Hi Roshni,
It could be that the repository tables were not correctly created in the Oracle Database.
Try restarting the oracle services ,also check the Oracle listener configurations are correct.
If you have an archieve of this repository then try mounting the archieve with a different name.
Also try restarting the MDM server.
Hope It Helped
Thanks & Regards
Simona Pinto

DATAEXPORT to sql server is giving error

Hi,
I am using DATAEXPORT to export data to SQL tables but its giving error:
MY TABLE:
USE SBC;
Create table TEST
     Period nchar(20),
     HSP_Rates nchar(20),
     Years nchar(10),
     Currency nchar(5),
     Scenario nchar(20),
     ICP nchar(20),
     [Co.] nchar(20),
     Version nchar(20),
     Product nchar(20),
     Entity nchar(30),
Account nchar(50),
     Data numeric(18, 5)
Created this order based on export taken on file
**My Script:**
SET DATAEXPORTOPTIONS
     DataExportLevel "ALL";
     DATAEXPORTCOLFORMAT ON;
     DataExportOverwriteFile ON;
     DataExportDecimal 4;
DATAEXPORTCOND ("HSP_InputValue" <> #MISSING And "HSP_InputValue" <> 0);
FIX (@REMOVE(@RELATIVE ("Balance_Sheet",0),"CY_Earnings"),"Per7","HSP_InputValue","FY12","Local","MY12 Budget", @RELATIVE ("ICP Top",0),@RELATIVE ("Co Total",0),Working,@RELATIVE (PODS,0),@RELATIVE ("Entity",0));
/*DATAEXPORT "File" "," "D:\Test.txt"*/
DATAEXPORT "DSN" "TEST" "Test" "admin" "XXXXXX";
ENDFIX;
Output when exported to File:
"Per7"
"HSP_InputValue","FY12","Local","MY12 Budget","No IC","Co 100","Working","ALLEZ","100-1050","Subs_Cash",500000.046
"HSP_InputValue","FY12","Local","MY12 Budget","No IC","Co 100","Working","AirFreight","100-1050","Subs_Cash",534324.370
ERROR IN LOGS:
[Fri Feb 03 01:10:20 2012]Local/SBC///15796/Info(1013210)
User [admin@Native Directory] set active on database [SBC]
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1013091)
Received Command [Calculate] from user [admin@Native Directory]
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1013167)
Received Command [Calculate] from user [admin@Native Directory] using [Test.csc]
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1021004)
Connection String is generated
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1021041)
Connection String is [DSN=SBC;UID=...;PWD=...;]
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1021000)
Connection With SQL Database Server is Established
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1021013)
ODBC Layer Error: [21S01] ==> [[Microsoft][ODBC SQL Server Driver][SQL Server]Column name or number of supplied values does not match table definition.]
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1021014)
ODBC Layer Error: Native Error code [213]
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Error(1012085)
Unable to export data to SQL table [Test]. Check the Essbase server log and the system console to determine the cause of the problem.
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1021002)
SQL Connection is Freed
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Warning(1080014)
Transaction [ 0xb0006( 0x4f2b885c.0xd4e40 ) ] aborted due to status [1012085].
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1012579)
Total Calc Elapsed Time for [Test.csc] : [0.022] seconds
I have tried using SQL Drivers for ODBC connection as well as Wire protocol driver.
Please assist asap.
Regards,
Vinit

Chawla,
Fixed in 9.3.3, Check out this, their are few more bugs fixed related to DataExport.
http://docs.oracle.com/cd/E10530_01/doc/epm.931/esb_93300_readme.pdf
8404516 Calculator.The DATAEXPORTCOND calculation command clashes with the FIX
command.
8913164 Calculator. Data exports that use DATAEXPORTCOND do not always export all
the data expected because not all conditions are taken into account within the
DATAEXPORTCOND statement
8988310 Calculator. When exporting data using the DATAEXPORT command from a
duplicate outline that contains a shared hierarchy, the exported data contains the
shared member, not the prototype Etc..
Cheers...!!
Rahul S.

Time to time its giving error in the FTP connection

Hi Gurus,
Im doing File to File Interface. Im using FTP for File transfer and the message protocol is 'File'. Im using the connection security as 'FTPS(FTP Using SSL/TLS) for control and data connection' and set the default command order.
I have uploaded the required certificate in the FTP server and the XI server also. I can view the certificate in the keystore of visual Administrator. Its working fine. But the problem is time to time its giveing this error "Error occurred while connecting to the FTP server "170.135.128.149:20021": iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier"
Can anyone please help to resolve this issue. i need to fix it as soon as possible.
Regards,
Rama

Hi All,
I m facing one peculiar problem with FTP server. I have desinged one R3 to FTP interface. I m trying to connect to FTP with secure SSL connection. For that we uploaded the certificate in the FTP as well as in the Visual administartor in the XI box. I didnt create any SSL socket for this. Our basis team told like we dont need this SSL socket stuff because here we are using FTP as a client. So just they uploaded the certificate in the trusted CA of Visual administartor. Our certificate is obtained from verisign. So the CN name in the certificate is Verisign. I didnt find any thing in the certificate other then this. In our communication channel we gave the hostname instead of IP address. But here my problem is, When i send the file to FTP its giving error in the first attempt. After that the message retiried itslef, the file has been sent successfull in the retry process. Why it is always fails in the first attempt.
Can anyone please help me to resolve this. I need to be fix today itself.
Regards,
Rama

Migrating from crystal report 8.5 to 10.0 giving error

migrating from crystal report 8.5 to 10.0 giving error
I am working in migrating my cr application to 10th ver from the existing 8.5 where we have to explicitly make a query in query builder and then attach it. I was using dsn in ms odbc for oracle driver to connect the DB. Now in 10.0 i have removed the query file created using 8.5 query builder and trying to write directly to command editor. the report as stand alone is working fine. but when i try to generate the pdf using my vb application then on .export option it is giving error as "Logon failed.
Details: 01S00:[Microsoft][ODBC driver for Oracle]Invalid connection string attribute". i think the problem might be with cddb_oracle.dll or crdb_oracle.dll file as i am using a evaluation version of crystal report 10. as input to dsn i am providing

migrating from crystal report 8.5 to 10.0 giving error
I am working in migrating my cr application to 10th ver from the existing 8.5 where we have to explicitly make a query in query builder and then attach it. I was using dsn in ms odbc for oracle driver to connect the DB. Now in 10.0 i have removed the query file created using 8.5 query builder and trying to write directly to command editor. the report as stand alone is working fine. but when i try to generate the pdf using my vb application then on .export option it is giving error as "Logon failed.
Details: 01S00:[Microsoft][ODBC driver for Oracle]Invalid connection string attribute". i think the problem might be with cddb_oracle.dll or crdb_oracle.dll file as i am using a evaluation version of crystal report 10. as input to dsn i am providing

Migrating from crystal report 8.5 to 10.0 giving error 01S00:error

migrating from crystal report 8.5 to 10.0 giving error
I am working in migrating my cr application to 10th ver from the existing 8.5 where we have to explicitly make a query in query builder and then attach it. I was using dsn in ms odbc for oracle driver to connect the DB. Now in 10.0 i have removed the query file created using 8.5 query builder and trying to write directly to command editor. the report as stand alone is working fine. but when i try to generate the pdf using my vb application then on .export option it is giving error as "Logon failed.
Details: 01S00:[Microsoft][ODBC driver for Oracle]Invalid connection string attribute". i think the problem might be with cddb_oracle.dll or crdb_oracle.dll file as i am using a evaluation version of crystal report 10. as input to dsn i am providing
1.dsn
2.usid
3.database
4.password
what else is missing . plz help.....

Well, you can migrate, you can not upgrade (semantics I suppose). E.g.; the RDC was deprecated in CR XI r1 and retired in CR 2008. Thus there is no way for you to upgrade to version 12 of the RDC as there is no such thing. So, from here, you have two options: migrate / port the app to .NET, or Java SDKs.
Re. RDC, see my blog here:
/people/ludek.uher/blog/2008/10/20/report-designer-component--past-present-future
For porting the app to .NET, see this article:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0eb394f-931e-2b10-3b82-9413bfc3f457
Ludek

Giving error in update query

This is my update query in oracle but it is giving error:
Update (select NM.Nominal_Amount,NM.Number_of_Units,NM.Current_Spot,NM.Published_Spot,NM.Strike_Price
from note_master NM ,
(     select NORM.Note_Master_ID, NORM.Asset, NORM.Currency , 50 as Spot_Price_Calc,      NVL(TOADD.NA,0) As NA, NVL(TOADD.NS,0)
As NS, NVL(TOADD.NA_P,0) As NA_P, NVL(TOADD.NS_P,0) As NS_P, NVL(TOADD.SA,0) As SA,      (50 * (NORM.Strike_Price_Per/100)) as
rike_Price_Calc,      (Case When UPPER(NORM.Misc2) = 'Q' THEN (NORM.No_Of_Shares * 50 * (NORM.Strike_Price_Per/100)) Else
NORM.Nominal_Amount End )as Nominal_Amount_Calc,     (Case When UPPER(NORM.Misc2) ='N' THEN (NORM.Nominal_Amount /( 50 * (NORM.Strike_Price_Per/100)))
Else NORM.No_Of_Shares End )as NO_Of_Shares_Calc,     (Case When UPPER(NORM.Misc2) = 'Q' THEN (NORM.No_Of_Shares * 50 * (NORM.Strike_Price_Per/100) * NORM.Issue_Price )/100
Else (NORM.Nominal_Amount * NORM.Issue_Price )/100 End )as Settlement_Amt_Calc     from      (          select Note_Master_Id, MIN(Spot_Price) as Spot_Price, Min(Strike_Price) as
Strike_Price, SUM(Nominal_Amount) as Nominal_Amount, SUM(No_Of_Shares) as No_Of_Shares , MIN(Issue_Price) as Issue_Price, MIN(Asset) as Asset, MIN(Currency) as Currency,
MIN(Strike_Price_Per) as Strike_Price_Per, MIN(Misc2) as Misc2      from      (          Select Note_Master_Id, Spot_Price, Strike_Price, Nominal_Amount, No_Of_Shares, Issue_Price, Asset,
Currency , Strike_Price_Per,Misc2      from Sample_ADF_FinIQ_Common.Note_Order_RM      Where Order_Status_Flag = 'YYYYYYNNNNNNNNNN'      And RO_ID = 'R000000002'     ) NORM      Group by Note_Master_Id     ) NORM
Left Outer JOIN Sample_ADF_FinIQ_Common.RATESSPOTBIDASK RSBA     On RSBA.PairCode = (NORM.Asset )          Left Outer JOIN      (     select Note_Master_ID,sum(Nominal_Amount)
as NA, sum(No_Of_Shares) as NS, sum(NominalAmt_Pending) as NA_P, sum(NoOfShares_Pending) as NS_P,sum(Settlement_Amt) as SA      from Note_Order_RM
Where RO_ID <> 'R000000002'     group by Note_Master_ID ) TOADD     On TOADD.Note_Master_ID = NORM.Note_Master_ID ) RESULT1 where NM.Note_Master_ID = RESULT1.Note_Master_ID )
set      Price_Updated_YN = 'Y'           ,
Nominal_Amount = RESULT1.NA + RESULT1.Nominal_Amount_Calc          , Number_Of_Units = RESULT1.NS + RESULT1.NO_Of_Shares_Calc          ,
Current_Spot = RESULT1.Spot_Price_Calc           , Published_Spot = RESULT1.Spot_Price_Calc           , Strike_Price = RESULT1.Strike_Price_Calc
where NM.Note_Master_ID = RESULT1.Note_Master_ID;
error :
rror at Command Line:17 Column:105
Error report:
SQL Error: ORA-00904: "RESULT1"."STRIKE_PRICE_CALC": invalid identifier
00904. 00000 - "%s: invalid identifier"
can anybody help.
Thanks

Still one more typo problem exists in you sql stament , equal to(=) operator is missing in your original statement look below
original
Where RO_ID 'R000000002'     group by Note_Master_ID ) TOADD     On TOADD.Note_Master_ID = NORM.Note_Master_ID ) RESULT1 where NM.Note_Master_ID = RESULT1.Note_Master_ID )
set Price_Updated_YN = 'Y'
modified
Where RO_ID='R000000002'     group by Note_Master_ID ) TOADD     On TOADD.Note_Master_ID = NORM.Note_Master_ID ) RESULT1 where NM.Note_Master_ID = RESULT1.Note_Master_ID )
set Price_Updated_YN = 'Y' Ok, once try with this code, some syntax prob i modified it.
Update (select NM.Nominal_Amount,NM.Number_of_Units,NM.Current_Spot,NM.Published_Spot,NM.Strike_Price
from note_master NM ,
(     select NORM.Note_Master_ID, NORM.Asset, NORM.Currency , 50 as Spot_Price_Calc, NVL(TOADD.NA,0) As NA, NVL(TOADD.NS,0)
As NS, NVL(TOADD.NA_P,0) As NA_P, NVL(TOADD.NS_P,0) As NS_P, NVL(TOADD.SA,0) As SA, (50 * (NORM.Strike_Price_Per/100)) as
Strike_Price_Calc, (Case When UPPER(NORM.Misc2) = 'Q' THEN (NORM.No_Of_Shares * 50 * (NORM.Strike_Price_Per/100)) Else
NORM.Nominal_Amount End )as Nominal_Amount_Calc,     (Case When UPPER(NORM.Misc2) ='N' THEN (NORM.Nominal_Amount /( 50 * (NORM.Strike_Price_Per/100)))
Else NORM.No_Of_Shares End )as NO_Of_Shares_Calc,     (Case When UPPER(NORM.Misc2) = 'Q' THEN (NORM.No_Of_Shares * 50 * (NORM.Strike_Price_Per/100) * NORM.Issue_Price )/100
Else (NORM.Nominal_Amount * NORM.Issue_Price )/100 End )as Settlement_Amt_Calc     from (      select Note_Master_Id, MIN(Spot_Price) as Spot_Price, Min(Strike_Price) as
Strike_Price, SUM(Nominal_Amount) as Nominal_Amount, SUM(No_Of_Shares) as No_Of_Shares , MIN(Issue_Price) as Issue_Price, MIN(Asset) as Asset, MIN(Currency) as Currency,
MIN(Strike_Price_Per) as Strike_Price_Per, MIN(Misc2) as Misc2 from (      Select Note_Master_Id, Spot_Price, Strike_Price, Nominal_Amount, No_Of_Shares, Issue_Price, Asset,
Currency , Strike_Price_Per,Misc2 from Sample_ADF_FinIQ_Common.Note_Order_RM Where Order_Status_Flag = 'YYYYYYNNNNNNNNNN' And RO_ID = 'R000000002'     ) NORM Group by Note_Master_Id     ) NORM
Left Outer JOIN Sample_ADF_FinIQ_Common.RATESSPOTBIDASK RSBA     On RSBA.PairCode = (NORM.Asset )      Left Outer JOIN (     select Note_Master_ID,sum(Nominal_Amount)
as NA, sum(No_Of_Shares) as NS, sum(NominalAmt_Pending) as NA_P, sum(NoOfShares_Pending) as NS_P,sum(Settlement_Amt) as SA from Note_Order_RM
Where RO_ID 'R000000002'     group by Note_Master_ID ) TOADD     On TOADD.Note_Master_ID = NORM.Note_Master_ID ) RESULT1 where NM.Note_Master_ID = RESULT1.Note_Master_ID )
set Price_Updated_YN = 'Y' ,
Nominal_Amount = RESULT1.NA + RESULT1.Nominal_Amount_Calc      , Number_Of_Units = RESULT1.NS + RESULT1.NO_Of_Shares_Calc      ,
Current_Spot = RESULT1.Spot_Price_Calc , Published_Spot = RESULT1.Spot_Price_Calc , Strike_Price = RESULT1.Strike_Price_Calc
where NM.Note_Master_ID = RESULT1.Note_Master_ID;Edited by: darkStargate on Dec 8, 2011 7:42 PM

ODISqlUnload giving Error

I am using ODISqlUnload for unloading data to text file using following command.
OdiSqlUnload -FILE=D:\SAP\Filename.txt -DRIVER=<%=odiRef.getInfo("SRC_JAVA_DRIVER")%> "-URL=<%=odiRef.getInfo("SRC_JAVA_URL")%>" "-USER=<%=odiRef.getInfo("SRC_USER_NAME")%>" "-PASS=<%=odiRef.getInfo("SRC_ENCODED_PASS")%>" "-FILE_FORMAT=FIXED" "-ROW_SEP=\r\n" "-DATE_FORMAT=yyyy/MM/dd HH:mm:ss" "-CHARSET_ENCODING=ISO8859_1" "-XML_CHARSET_ENCODING=ISO-8859-1"
"-QUERY=select 'FAILURE',nvl(substr(substr( PACKAGE_NAME||',', 1, instr(PACKAGE_NAME,',')-1 ),7),'Error Due to missing scenario or Any other unlogged error') ,to_char(sysdate,'DD-mm-yyyy HH24:MI:SS') from error_messages"
But it is giving strange error. as
java.lang.IllegalArgumentException: Could not load JDBC driver class []
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.setDriverClassName(DriverManagerDataSource.java:159)
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.<init>(DriverManagerDataSource.java:92)
     at com.sunopsis.dwg.tools.SqlUnload.actionExecute(SqlUnload.java:298)
     at com.sunopsis.dwg.function.SnpsFunctionBase.execute(SnpsFunctionBase.java:273)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java:3185)
But at the same time i am using same command in another procedure as
OdiSqlUnload -FILE=D:\SAP\RBSIT_#SAP_Filename.txt -DRIVER=<%=odiRef.getInfo("SRC_JAVA_DRIVER")%> "-URL=<%=odiRef.getInfo("SRC_JAVA_URL")%>" "-USER=<%=odiRef.getInfo("SRC_USER_NAME")%>" "-PASS=<%=odiRef.getInfo("SRC_ENCODED_PASS")%>" "-FILE_FORMAT=FIXED" "-ROW_SEP=\r\n" "-DATE_FORMAT=yyyy/MM/dd HH:mm:ss" "-CHARSET_ENCODING=ISO8859_1" "-XML_CHARSET_ENCODING=ISO-8859-1"
SELECT * FROM ompodi.start_record
which is running fine.
Why this would be occurring??
Help appreciated.
Edited by: MaheshGx on Feb 23, 2012 1:51 PM

IT WAS GIVING ERROR BECAUSE IN SOURCE COMMAND I HAVENT SPECIFIED SOURCE TECNHOLOGY AND LOGICAL SCHEMA.
ALSO IN ABOVE COMMAND THERE IS NO NEED TO WRITE QUERY WORD EXPLICITELY.
SO IT SHOULD BE AS
OdiSqlUnload -FILE=D:\Patrol\kaname2alert.txt -DRIVER=<%=odiRef.getInfo("SRC_JAVA_DRIVER")%> "-URL=<%=odiRef.getInfo("SRC_JAVA_URL")%>" "-USER=<%=odiRef.getInfo("SRC_USER_NAME")%>" "-PASS=<%=odiRef.getInfo("SRC_ENCODED_PASS")%>" "-FILE_FORMAT=FIXED" "-ROW_SEP=\r\n" "-DATE_FORMAT=yyyy/MM/dd HH:mm:ss" "-CHARSET_ENCODING=ISO8859_1" "-XML_CHARSET_ENCODING=ISO-8859-1"
select 'FAILURE ',trim(nvl(substr(substr( PACKAGE_NAME||',', 1, instr(PACKAGE_NAME,',')-1 ),7),'Error Due to missing scenario or Any other unlogged error')) Package_Name,to_char(FAILURE_TIMESTAMP,'DD-mm-yyyy HH24:MI:SS') Execution_Time from <%=odiRef.getSchemaName("OMP","W")%>.ERROR_MESSAGES order by failure_timestamp desc
HOPE IT WOULD HELP SOMEONE.
SO POSTING IT.

OdiSqlUnload giving error for network location specified

Hi,
I have been trying to use OdiSqlUnload tool to create text files on Network machine.
But it is giving following error
oracle.odi.oditools.OdiToolInvalidParameterException: Error while setting parameters on tool
at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:607)
So as per error it is saying parameters specified are incorrect.
Let me also paste for you Code i have used.
OdiSqlUnload -FILE= \\10.161.102.182\Interfaces\OMP\BUR\snd\RBSIT_#SAP_Filename.txt -DRIVER=<%=odiRef.getInfo("SRC_JAVA_DRIVER")%> "-URL=<%=odiRef.getInfo("SRC_JAVA_URL")%>" "-USER=<%=odiRef.getInfo("SRC_USER_NAME")%>" "-PASS=<%=odiRef.getInfo("SRC_ENCODED_PASS")%>" "-FILE_FORMAT=FIXED" "-ROW_SEP=\r\n" "-DATE_FORMAT=yyyy/MM/dd HH:mm:ss" "-CHARSET_ENCODING=ISO8859_1" "-XML_CHARSET_ENCODING=ISO-8859-1"
SELECT * FROM ompodi.start_record
As here i have specified network location, does it mean i cannot create files on ntwork machine directly?
If so then is there any way to move files to network machine location from host computer?
Also i would like to know any tool for deleting files , preferably network location.
Thanks and Regards,
Mahesh

IT WAS GIVING ERROR BECAUSE IN SOURCE COMMAND I HAVENT SPECIFIED SOURCE TECNHOLOGY AND LOGICAL SCHEMA.
ALSO IN ABOVE COMMAND THERE IS NO NEED TO WRITE QUERY WORD EXPLICITELY.
SO IT SHOULD BE AS
OdiSqlUnload -FILE=D:\Patrol\kaname2alert.txt -DRIVER=<%=odiRef.getInfo("SRC_JAVA_DRIVER")%> "-URL=<%=odiRef.getInfo("SRC_JAVA_URL")%>" "-USER=<%=odiRef.getInfo("SRC_USER_NAME")%>" "-PASS=<%=odiRef.getInfo("SRC_ENCODED_PASS")%>" "-FILE_FORMAT=FIXED" "-ROW_SEP=\r\n" "-DATE_FORMAT=yyyy/MM/dd HH:mm:ss" "-CHARSET_ENCODING=ISO8859_1" "-XML_CHARSET_ENCODING=ISO-8859-1"
select 'FAILURE ',trim(nvl(substr(substr( PACKAGE_NAME||',', 1, instr(PACKAGE_NAME,',')-1 ),7),'Error Due to missing scenario or Any other unlogged error')) Package_Name,to_char(FAILURE_TIMESTAMP,'DD-mm-yyyy HH24:MI:SS') Execution_Time from <%=odiRef.getSchemaName("OMP","W")%>.ERROR_MESSAGES order by failure_timestamp desc
HOPE IT WOULD HELP SOMEONE.
SO POSTING IT.

Item Open Interface giving error for Org Assignment

We ran the MTL_SYSTEMS_ITEMS_INTERFACE & loaded all the items at master level.
We are having issues in setting at Org level. Cant figure out what the issue as only few records gets assigned & then garbage sets in for remaining records. An SR has been raised & the tech support representative was saying that UOM's are different at master & org levels. Never heard of this issue earlier. I have worked with UOM's different at Master/Org levels.
The UOM's are different at Master & Org Level and in some cases the UOM are different for different Orgs. Attribute Control for Primary/Sec UOM is at Org level. The UOM's belong to the same UOM Class. There are standard conversions defined for all these UOMs.
Any pointers for quick resolution ?

Pl do not post duplicates - Item Open Interface giving error for Org Assignment

Top N query giving error for oracle 8.0.6

Dear All,
We are executing this query SELECT XBLNR, WERKS, MATNR, MDV01, BACKFLQUANT, STATUS, SAPTIMESTAMP, PITSTIMESTAMP, PMTIMESTAMP, BATCH FROM (SELECT XBLNR, WERKS, MATNR, MDV01, BACKFLQUANT, STATUS, SAPTIMESTAMP, PITSTIMESTAMP, PMTIMESTAMP, BATCH FROM PMBPITS.PITS_UNITY WHERE STATUS = '01' ORDER BY PMTIMESTAMP) WHERE ROWNUM < 20
on oracle 8.0.6 but this is giving the following error
ora - 00907 missing right parenthesis error
1. Is it that in the inner select we cannot use order by and where clause together.
2. We also found that if we remove order by from inner select then the query is not giving error
pls help . points will be awarded

Hi,
what ever the Aman said is correct. You check this is supported in 8.1.5, SQL allows you to embed the ORDER BY clause in a subquery and place the ROWNUM condition in the top-level query;
'Top-N query' is a ORACLE 8i feature which is supported in SQL. However,
Bug:855720 states the following:
"PL/SQL does not support top-N queries (ORDER BY in SUBSELECT/SUBQUERY
or VIEW. Since this feature is available in SQL, but not in PL/SQL,
it has been logged as a Bug that will be fixed in 8.1.6."
- Pavan Kumar N

Giving error while creating a sales contact for the previous year (2008)

Hi Friends,
We are currently with SP12. When we try to create a sales contract for the previous year it is giving error like "Schedule line is for the item 100 cannot be after the order's latest delivery date".
i tried debugging and found that that there is a rule created for this (in SP12). I commented the rule and tried to create a contract but, again got an error "Error while saving". This error I can't catch while debugging.
I even didn't find where the schedule line date and header cancel dates are set so that I can change the dates manually.
If any one has any idea, kindly help me.
Best regards,
Swarna Seeta

Hi Wolfhard,
Thanks for the reply.
You are right and I have uncommented the line which assigns true to the return value and the contract got saved now.
Thank you so much.
I just want to know whether commeting this rule effects any of the functionalities of the sales contract.
Best regards,
Swarna Seeta

MDM Lock command giving error MDMClientError:71 on Mavericks

Similar Messages

Maybe you are looking for