Mdx get properties value

Hi Expert
I have a mdx:
with member
[PLANITEM].[H1].[ccc] as
'[time].[h1].currentmember.properties("DAYS")' ---> this one cannot get property value
member
[PLANITEM].[H1].[aaa] as
'[time].[h1].currentmember.properties("level") --> this one ok .....
What I want to get is the current month days for further calculation. In my TIME dimension already include properties("DAYS")'
I am just can get all other PROPERTY value , EXCEPT property "DAYS" .why??
any idea??
Thanks..

Go into Admin...Click on the Dimension, then do Maintain Dimension Properties....and make sure that the "InApp" box is checked next to the "DAYS" property.
You will need to then process the dimension since it is a structural change. Full process.
Please let me know if this resolves your issue.
Greg

Similar Messages

Get properties value from a bean

Hello
I just began with JSF and have a problem. I konw how to save and get properties value into/from a bean from/into a jsf page. But how can I get the values from a other java class? I would like to get the properties from the bean A and use them in the class B and write them at the end back into the bean. What would be the easiest way for this?
Thank you for the help!
Best regards, mike

Depending on the scope of your bean (request/session), have a look to the related method (getSessionMap or getRequestMap ) from ExternalContext class (accesible from FacesContext.getCurrentInstance)

[MDX]can't get the value from two variables (@FromDimTimeFiscalYearMonthWeekLastDateDay &(@ToDimTimeFiscalYearMonthWeekLastDateDay

can't get the value from two variables when execute MDX : Anyone who can help ?
================================
with member [Measures].[APGC Replied Volume] as
([Measures].[Question],[Dim Replied By].[Replied By].&[APGC])
member [Measures].[APGC Moderated Volume] as
([Measures].[DashBoard Thread Number],[Dim Moderated By].[Moderated By].&[APGC])
member [Measures].[APGC Answered Volume] as
([Measures].[Question],[Dim Answered By].[Answered By].&[APGC])
SELECT
NON EMPTY
[Measures].[Forum Thread Number],
[Measures].[Reply In24 Hour],
[Measures].[Question],
[Measures].[Deliverale Minute],
[Measures].[Working minutes],
[Measures].[Answered],
[Measures].[1D Answer],
[Measures].[2D Answer],
[Measures].[7D Answer],
[Measures].[APGC Replied Volume],
[Measures].[APGC Moderated Volume],
[Measures].[APGC Answered Volume],
[Measures].[Avg HTR],
[Measures].[Avg HTA],
[Measures].[Total Labor]
} ON COLUMNS,
NON EMPTY { ([Dim Engineer].[SubGroup-Alias].[Alias].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS
FROM (
SELECT ( STRTOMEMBER(@FromDimTimeFiscalYearMonthWeekLastDateDay, CONSTRAINED) : STRTOMEMBER(@ToDimTimeFiscalYearMonthWeekLastDateDay,
CONSTRAINED) ) ON COLUMNS
FROM [O365]) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS

Hi Ada,
According to your description, you can't get the member when using the strtomember() function in your MDX. Right?
In Analysis Services, while the member name string provided contains a valid MDX member expression that resolves to a qualified member name, the CONSTRAINED flag requires qualified or unqualified member names in the member name string. Please check if the
variable is a Multidimensional Expressions (MDX)–formatted string.
Reference:
StrToMember (MDX)
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Tables - How to get cell value? How to get/set UI controls properties?

Hi,
I want to get a the cell's value of row x and col y.
The table is not bounded so I cannot use:
Table1.Items(key).DataSourceRow.DataItem("ColID")
Another question:
How to I set the properties of a table column which contains UI elemtents that I create dynamically?
for exmpale:
c1 is a TableBodyCell
tr is a tableRow
c1 = New TableBodyCell(Table1, tr, 0)
c1.TableCellContent = New InputField
tr.Cells.Add(c1)
How do I set/get the properties of the InputField?
Thanks,
Omri

Thanks Reshef,
My Table's scheme:
Column 0 - TextView
Column 1 - InputField
I was able to get a cell value of type TextView by using what you suggested:
Write(CType(Table1.Items(0).Cells(0).TableCellContent,TextView).Text)
However, when I tried to do the exact thing to InputField I didn't get any value (nor error)
Write(CType(Table1.Items(0).Cells(1).TableCellContent, InputField).Value)
I fill the Input Field and then push "Execute" button which supposed to write the value.
About my second question:
By using the cast (CType) I can access the properties I need (like Width) so it kind of solve my problem.
for example:
CType(Table1.Items(1).Cells(1).TableCellContent, InputField).Width = "15px"

Help to get percentile value in MDX

Hi,
I would really appreciate if anyone could give me a MDX statement that
returns percentile value. For example, the 90th percentile of store sales.
Please do not point me to using Excel.
Thanks,
Idan

hi,
>>In MM how can i get text values from excpetion ocurred in ccBPM ?
this is not possible
Regards,
Michal Krawczyk

MDX: how to get dimension values as columns

Hi people
firstly i apologize because i'm most certainly using the wrong terms here. My problem is that i have the query below that contains a dimension that has always two values (MONTH VALIDATION) as shown on the query and image below:
SELECT NON EMPTY
{[Measures].[00 - Costs €]}
ON COLUMNS, NON EMPTY {(
[Project Platoon].[Platoon].[Platoon].ALLMEMBERS ,
[Financial Data Month Validation].[Month Validation Status].[Month Validation Status].ALLMEMBERS)}
DIMENSION PROPERTIES MEMBER_CAPTION,MEMBER_UNIQUE_NAME ON ROWS
FROM [DataCube] CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
and i get a result like the one below:
Platoon|
Month Validation|
Costs|
Borg
Open
11
Borg
Closed
99
My question is: how can i "flatify" this so that i show
Platoon|
Open|
Closed|
Costs |
Borg
99
11
99+11=110
that is, transform the values of [MonthValidation] into columns ?

your answer inspired me to arrive at this:
SELECT NON EMPTY {
[Measures].[00 - Costs €]
[Financial Data Month Validation].[Month Validation Status].[Month Validation Status].ALLMEMBERS
ON COLUMNS,
NON EMPTY {
[Project Platoon].[Platoon].[Platoon].ALLMEMBERS
DIMENSION PROPERTIES
MEMBER_CAPTION,MEMBER_UNIQUE_NAME ON ROWS
FROM
[DataCube]
CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
but can you help me construct fields for a ssas 2008r2 - visual studio 2010 based report?
i try to add one with
FIELD SOURCE=
<?xml version="1.0" encoding="utf-8"?><Field xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xsi:type="Level" UniqueName="[Financial Data Month Validation].[Month Validation Status].[Month Validation Status].Closed" />
didn't work :(

How to Get and Update properties values from XML tag Using Xquery or PL Sql

Hi
I have this tag
<Solicitud Pais = "1">
How i can get Pais value?
How i can update Pais Value?
Y can use Xquery funtions or PL SQL for this?
Thak's
Angel

How i can get Pais value? ExtractValue
How i can update Pais Value?UpdateXML
Y can use Xquery funtions or PL SQL for this?Yes
Without knowing more about your requirements, where information resides, or even a version of Oracle, that is the best I'll do.

How to Get property values from Shared Object in client's load event - Very urgent

I am using shared object to share data between two users. First user connect to shared object and set some value in shared object. Please consider that second user has not connected with the shared object yet.
Now when second user connects to the server and try to get that property set by first user, he could get shared object but could not get properties of Shared object set by first user. I observed few times that Second user can get these properties within "Sync" event between two users. But I would like to get these values for Second user in any stage (i.e. in load event etc.). Whenever Second user tries to get the property of Shared object, the object will reset the actual property value and then return reset value.
Anyone faced such issue while using shared object between two users. If so, I would appreciate if you could let me know your suggestions for following questions:
1) Is there any way to get all the properties of shared object before sync event called, as I want to get it immediately when second user connect to the application and perform next task based on the values stored in shared object.
2) Is it possible for second user to check whether any property has been set by first user? So that second user can use the property instead of reset it.
Any kind of help would be greatly appreciated.
Thank You.

I am using shared object to share data between two users. First user connect to shared object and set some value in shared object. Please consider that second user has not connected with the shared object yet.
Now when second user connects to the server and try to get that property set by first user, he could get shared object but could not get properties of Shared object set by first user. I observed few times that Second user can get these properties within "Sync" event between two users. But I would like to get these values for Second user in any stage (i.e. in load event etc.). Whenever Second user tries to get the property of Shared object, the object will reset the actual property value and then return reset value.
Anyone faced such issue while using shared object between two users. If so, I would appreciate if you could let me know your suggestions for following questions:
1) Is there any way to get all the properties of shared object before sync event called, as I want to get it immediately when second user connect to the application and perform next task based on the values stored in shared object.
2) Is it possible for second user to check whether any property has been set by first user? So that second user can use the property instead of reset it.
Any kind of help would be greatly appreciated.
Thank You.

All I want to do is get the value associated..

All I want to do is get the value associated with a dropdown item...
1. I have a combo box
2. It has text values that you can click
3. The text values have export values associated with it
4. When I click a text value from the list, I want to get the numeric value associated with it
Example combo box:
"Orange" has the export value of "1234"
When I click "orange" I want to get the export value "1234" and alert it to the screen
I'm using javascript, here's what I have so far:
In the combo box properties I have the following validation script:
theFruitClicked();
I have a function in the document javascript:
function theFruitClicked()
app.alert(event.value);
This is alerting the text value not the export value.
What else should I do to get the export value?
Thank You.

You may need the scripting forum http://forums.adobe.com/community/acrobat

How to get string value from xml in JSF??

In JSF How to get string value from xml, .ini and properties file. I want to get string value from xml or text to JSF

Just use the appropriate API's for that. There are enough API's out which can read/parse/write XML, ini and properties files. E.g. JAXP or DOM4J for xml files, INI4J for ini files and Sun's own java.util.Properties for propertiesfiles.
JSF supports properties files as message bundle and resource bundle so that you can use them for error messages and/or localization.

How to get a value from an object

Here is the concept of something I want to do in PowerShell:
$exp = get-process explorer | select *
$pms64 = get_value( $exp, PagedMemorySize64 )
As I see it, the value would be available to use. Using that technique I could get other values then order them to write to a log file.
How should I do this?
Please make the answer as simple as possible. What search term can I use to find a tutorial on this topic?
~jag77 We need to know what a dragon is before we study its anatomy. (Bryan Kelly, 2010)

Hi,
Here's a simple way to get at a single property:
$pms64 = (Get-Process explorer).PagedMemorySize64
$pms64
For the purpose of writing to a log file, you'd be better off piping the object through Select-Object to get the properties you're interested in and then into Export-Csv or Out-File to create the output.
Get-Process explorer |
Select-Object -Property Name,Id,PagedMemorySize64 |
Export-Csv .\explorerStats.csv -NoTypeInformation
Some reading material:
http://windowsitpro.com/powershell/powershell-objects
EDIT: Also, I do highly recommend that you look through the link jrv has posted. There's good information there.
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

How to get the value from a database without submitting a jsp page

I have a jsp which has a text box depending on the value entered I want to get the value from a database for other two fields with out submitting jsp page. I am using struts.
Thanks For any assistance provided.

Alright,here is an example for you for the first case.
Present.jsp:
============
<html:html>
<head>
<title><html:message key="page.title"/></title>
</head>
<body>
<html:form action="ChangeEvent.do">
<html:hidden property="method"/>

Emp Id:<html:text property="empId" size="5" onkeyup="if(true){this.form.elements[0].value='populateDetails';this.form.submit();}"/>
Emp Name:<html:text property="empName" size="10" />
Email Address:<html:text property="email" size="10" />
<html:submit>Submit</html:submit>
</html:form>
</body>
</html:html>struts-config.xml:
==================
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.1//EN" "http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
<struts-config>

<form-beans>
<form-bean name="employeeFormBean" type="org.apache.struts.action.DynaActionForm">
   <form-property name="empId" type="java.lang.String"/>
   <form-property name="empName" type="java.lang.String"/>
   <form-property name="email" type="java.lang.String" />
</form-bean>
</form-bean>
<action-mappings>
<action path="/ChangeEvent" type="Test.GetChangeAction" name="employeeFormBean" scope="request" parameter="method">

<forward name="success" path="/Present.jsp"></forward>
<forward name="failed" path="/error.jsp"></forward>
</action>
</action-mappings>
</struts-config>GetChangeAction.java:
=====================
public class GetChangeAction extends DispatchAction{
public ActionForward populateDetails(ActionMapping mapping,ActionForm form, HttpServletRequest request, HttpServletResponse response) throws Exception {
        DynaActionForm dForm = (DynaActionForm)form;
        String empId = dForm.get("empId");
        // calling Model / Db and then getting back Employee Details
        EmployeeBean eb = ModelUtils.getDetails(empId);
        // Updating form bean by updating values from the Model
        dForm.set("empName".eb.getEmpName());
        dForm.set("email".eb.getEmail());
        return mapping.findForward("success");
}well to me this should work regardless to any browser but we need to make sure we put in our logic properly.

How to get the value from the checkbox

Hi All,
Good Evening,
i want to get the value from the check box.
for this i wrote like this
OAMessageCheckBoxBean cbb=(OAMessageCheckBoxBean)webBEan.findChildRecurssive("item240")
String val=cbb.getvalue(pageContext).toString();
val getting the value only when checkbox is checked.
suppose check box is not checked that time i got NULL POINTER exceptionn.
so
i tried the following way alsoo
string val=pageContext.getParameter("item240");
here val return 'on' only when checkbox is checked.
otherwise NULL value returnss.
but i want to get the value is 'Y' when i am checked the checkbox
otherwise returns NULL valuee.
already i set the checkbox properties alsoo
Checked :Y
unchecked:N
pls tell me

Hi,
use
try
OAMessageCheckBoxBean cbb=(OAMessageCheckBoxBean)webBEan.findChildRecurssive("item240")
String test = cbb.getvalue(pageContext).toString();
catch(Exception e)
String test = "";
this way you can handle null pointer exception.
Thanks,
Gaurav

How to get the values from profileFormHandler

Hi,
here i have problem with how to get the values after setting the values to that , how i have to call repository, what repository i've to call?

When you are setting values, check the repository(getRepository()) from which mutable repository item is created. Go to that class .properties file and check the repository mapping.
-karthik

How to get textfield values from a tableRowGroup

I have textfield in a table.
my problem is
How to get textfield values from a tablerowgroup1.

I have created getQuantity and setQuantity properties in my session bean and mapped text property of tabletextbox to session bean quantity.
also used map to set and reatrieve quantity values.
I am getting error for bean type quantity.

Mdx get properties value

Similar Messages

Maybe you are looking for