Measuring Point during IK01 not allowing characteristics with CHAR type

Hi Experts,
Measuring Point during IK01 not allowing characteristics with CHAR type Only allows NUM,
could you anyone suggest on this.
Regards
Nitin

May i know the reason of such implementation?
You can use group code and valuation code for assigning predefined values to measuring documents.
Moreover text field can be used for assigning short text to it.

Similar Messages

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the secnd point an end point. The pen tool stays active and I either have to clic

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.

artisttouch,
If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
To solve it, you may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Measuring point/document is not updating

Dear all,
I am new in PM. I have one issue over here.Measuring point/document is not updating automatically after production order confirmation via co11n . I tried with following steps
1) Created the equipment as (P)Production resources/tools -->created measuring point as a counter ---> maintain the usage value formula SAPF02 in the PRT tab . Unit of measurement for the characteristics and base unit of measure of material are same
2) Then i have assigned this equipment as a PRT in the routing of material .
3) Production order confirmation via co11n Each unit
Which steps i am missing. if u give me steps by steps procedure to me for counter based maintenance, its helpful for me.
STILL not answered and no reply.
I am waiting for reply.
Thanks
tarun
Edited by: tarun on Oct 5, 2010 5:06 PM

Hello,
Have look this thread [Re: Auto Update of measuring point/document;
Regards,
Rakesh

Have tried to install icloud 4.0 for windows and again it does not allow syncing with outlook 2013 calendar and contact using windows 8.1 and IOS 8.02 (unexpected error)? I thought itunes 12.0 and icloud 4.0 would solve issue but still same result.

I have tried to install icloud 4.0 for windows and again is does not allow syncing with outlook 2013 calendar and contact, using windows 8.1 and IOS 8.02 (get - unexpected error)?

Having same issues. had been syncing every few days with outlook 2007 contacts and calendar but since updated to 4.0.2 and latest itunes I get an error that it is unable to sync. I can't seem to find any solution.

Ever seen this error message? You tried to use HTML or other restricted code. We, currently, do not allow HTML or other types of code in our message board posts or signatures. Try again with simple text only.

Trying to load this site
http://southcarolina.247sports.com/
and it redirects me to this address
http://media.247sports.com/Oops.html?aspxerrorpath=/
and gives me the error message. "You tried to use HTML or other restricted code. We, currently, do not allow HTML or other types of code in our message board posts or signatures. Try again with simple text only. "
Thanks for your help

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Error during proxy processing An exception with the type CX_BBPX1_STD_MESSA

Hello,everyone!
My PI version is 7.11,SRM SUS version is 7.0,ECC version is 6.0 ,When I import XI SRM CONTEN,sending IDOC in ECC,there is a error some of the mesages:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX1_SUSPO_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Detialed error from SXMB_MONI,
Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner 0015111411 with type 'Vendor' I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076527 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line:
This issue only ocuured for partner 0015111411, but we tried with other partner ID and those messages are processed sucessfully and PO is created.
I have a doubt that, is there functionality in proxy to compare the country with partner in SRM system. Could please anyone help me one the same.
Regards,
Baskaran K

HI,
This is a standard proxy. I'm not sure how to debug the proxy with payload. Could you please tell me the steps.
We have one more error message
<FAULT_TEXT>Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner XY91 with type 'Sold-to Party' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076526 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
Is there any table to check these details like Sold-to Part, Vendor etc in SRM system?
Regards,
Baskaran K

The operation is not allowed for result set type FORWARD_ONLY

Hi,
I am trying to use scroll insensitive resultset in following manner-
Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
ResultSet rs = stmt.executeQuery("some sql here");
rs.last();
but the rs.last() throws this exception-
com.sap.dbtech.jdbc.exceptions.SQLExceptionSapDB: The operation is not allowed for result set type FORWARD_ONLY.
     at com.sap.dbtech.jdbc.ResultSetSapDB.assertNotForwardOnly(ResultSetSapDB.java:2725)
     at com.sap.dbtech.jdbc.ResultSetSapDB.last(ResultSetSapDB.java:557)
Database version: Kernel    7.5.0    Build 019-121-082-363
Driver Version: MaxDB JDBC Driver, MySQL MaxDB, 7.6.0    Build 030-000-005-567
This used to work with 7.5 version driver. Why this is failing with 7.6 driver, any clues?
Thanks,
Vinod

Hi Vinod,
due to performance improvement when using forward only cursor we changed the default for the resultset type from TYPE_SCROLL_SENSITIVE to TYPE_FORWARD_ONLY starting with JDBC driver version 7.6. So I guess the exception comes from a statement where you didn't set the resultset type while creating it. Please check if all of the statements that you want to be scrollable have set the correct resultset type.
Regards,
Marco

Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB

Hi All,
I am facing the following problem in production server when even the file got processed successfully .
Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause The system tried to insert a data record, even though a data record with the same primary key already exists
Can you please suggest how it can be handled?
Regards,
Saras

You need to debug your proxy program and check all the insert statemrnts. Looks like there is an exception being thrown in the proxy (may be after the completion logic to push the data in to db) which is not being caught.
Proxies are object oriented and it is a good practice to implement Exception Handling mechanism.
VJ

Import not allowed on nodes of type element declaration

I have 2 very simple transformation processes, consisting of:
1. hit a web service
2. filter the output
3. transform into a variable of type defined by a schema document
4. get the variable as a string
5. call another web service and pass the string
The processes are identical except for the variable type. One process works, the other fails when converting to a string. Here is the error message:
<2005-10-25 11:33:40,627> <ERROR> <default.collaxa.cube.xml> ORABPEL-09500
XPath expression failed to execute.
Error while processing xpath expression, the expression is "orcl:get-content-as-string(bpws:getVariableData("OutputDocument"))", the reason is import not allowed on nodes of type element declaration.
I can successfully use an xsl to convert the variable to a string, but when I utilize the assign activity, it produces the error above. Obviously, the schema files are different for the 2 variables, but I cannot see a problem. The schemas are both valid.
Has anyone encountered this error?
Thanks,
Dave

The cast does not throw an exception, but the resulting string is empty.
The problem is that I do not understand the error message. I am not sure what import it is referring to.
Thanks

Rebate-Manual payment is not allowed for this agreement type

Hi,
While processing the Rebates, after the Sales cycle till Billing document, when i i try to process the partial settlement it is givin a message as "Manual payment is not allowed for this agreement type"
could you please suggest.
Regards
AS

Hi AS
If you want to do manual payment then in VB)2 select the Agreement type and then in that agreement type check wheather Manual rebate order type has been assigned or not and Manual payment has been checked or not . If they are not maintained and Checked then maintain the rebate document type and check the box Manual accruals and then you can do Manual Payment for that agreement
Regards
Srinath

CProjects - DMS integration:26 036 You are not authorized for with doc.type

Hi Experts,
I need to use cProjects integration with DMS. When I try to create a link to an existing document I find the following error:
26 036 You are not authorized for with document type DRW
My user has authorization to the doc type in the DMS system (linked by RFC to cProjects system). I also have defined the object link in the document type.
Do you know which configuration may be missing?
Thanks in advance!
Neil

Hi Niel,
How is the RFC connection established between DMS and cProjects system? Do check the authorizations of the RFC user through which the connection is established.
Regards,
Vivek Pandey

SQLException: Access not allowed (problem with ACL)

Hi, I'm getting the following error when I start my Weblogic (7.0) server.
java.sql.SQLException: weblogic.common.ResourceException: Access not allowed
I followed these steps to Provide the necessary ACl permisiions:
1. Compatibility Security => ACLs
Create a new ACL:
name : weblogic.jdbc.connectionPool.yourPoolname
permission : admin
group : Administrators
2. Create a new Connection Pool:
ACL Name : weblogic.jdbc.connectionPool.yourPoolname
In 'Target' tab, choose server and click the Apply button.
I even checked fileRealm.properties, the user admin123 (the user name with which I start the server), is included in all the connectionpool ACL lists. I restarted the server to pick the new changes but it still gives the same errors.
Please help,
Thanks

You need to create the correct ACL for the DataSource following this procedure in the Administration Console:
1. Compatibility Security => ACLs
Create a new ACL:
name : weblogic.jdbc.connectionPool.yourPoolname
permission : admin
group : Administrators
2. Compatibility => click Refresh button
3. Services => JDBC => Connection Pool
Create a new Connection Pool:
ACL Name : weblogic.jdbc.connectionPool.yourPoolname
In 'Target' tab, choose server and click the Apply button.
4. Services => JDBC => Data Sources
You can create a new Data Source using this connection pool successfully
Regards,
Prasanna Yalam

Zero not allowed for price condition type

Hi experts,
   I have a scenario related to return. Based on the received return goods quality, we give different % of reimbursemnet to our customer.
Currently, in my pricing procedure, I have
PRICE COND 1 (which is the original selling price) (not allow manually change)
HA00 (depends on the % of reimbursement, we apply a %. Let's say we give 70% reimbursement to our customer, then we input -30%)
PRICE COND 2 (which is the net value of PRICE COND1 and HA00, calculate type is 2 - Net value)
For PRICE COND 1, and HA00, we haven't assigned any account key to them, since they are for reference only and shouldn't have any account posting.
The problem now is that, we received return goods with damage, and need to give 0% inbursement. For inventory point of view, we do receive the damaged goods and then directly go to scrap. However, when we try to input -100% in HA00 (so net price for that item is 0), error occurs when we issue credit for return, account cannot determined for PRICE COND 1 and HA00. It is because when PRICE COND 2 is not zero, PRICE COND 1 and HA00 are both become inactive in conditions. But now, since PRICE COND 2 is zero, both PRICE COND 1 and HA00 are become active and due to missing account key, it creates the error during account determination.
   Please kindly help. Thanks.

hi gundam,
   why do u need to create a credit memo for 100% loss?
just need the material movement document that will update the stock accounts then add a billing block.
thank you and best regards.

Not allow to add condition type, if it already existing

How to setting, if I want to control that not allow to add same condition type, if it already existing in the transaction.
For example,
PR00    100.00 USD/MT
ZDIS       10.00 USD/MT
ZDIS         8.00 USD/MT (Not allow to enter or add condition type)
Thanks!!
Edited by:
Edited by: Kitta on Jan 29, 2008 3:17 PM

Create A routine function for same .
I am given here the code also
Write the following codes given below in include file.
*& Include           ZXVVAU05
Written for restriction in VA02 for Condition type duplication
DATA:   BEGIN OF tXKOMV OCCURS 50.
        INCLUDE STRUCTURE KOMV.
DATA:   END   OF tXKOMV.
data : tab_name(40) type c ,
       ld_len type i , ld_len1 type i .
field-symbols : <tab> type any.
tab_name = '(SAPMV45A)XKOMV[]'.
assign (tab_name) to <tab>.
txkomv[] = <tab>.
describe table txkomv lines ld_len .
sort txkomv by kposn KSCHL .
delete adjacent duplicates from txkomv comparing kposn KSCHL .
describe table txkomv lines ld_len1 .
if ld_len1 ne ld_len .
refresh txkomv .
message e002(zmm) with ' Please remove duplicate condition in item price' .
endif .
4. Save and activate.
This has to be done thru Abap person ,Hope this will solve the problem of yours as it has mine.
regards
Manu Kapoor

Forms: Oracle AS 10g R2 - parameter with "char" type only limit to 4k

Hi,
i have one forms with parameter ":parameter.whole_rights" (Datatype=Char, Length=32767) over design time.
when i compiled and execute it in old server (Oracle AS 10g R1), it work perfectly but when compiled and execute it over the 10gr2, it always show ora-06502: pl/sql: numeric or value error.
after some troubleshooting, i found out that the maximum length for "char" type parameter is only 4k. if i assign any string larger than 4k characters, it will show the error as per mentioned but it work on old server...
anyone have this problem and how to resolve it???
additional information:
server is on unix environment.
Edited by: cy82 on Jun 15, 2010 3:35 AM

Hi there,
the application does not use up all the 32k characters, the maximum length it use currently is around 6k.
the parameter is used to store all the available access right (forms name, button/object name, read, write etc which is very customized & application specific design). every related access right in that parameter will be passed seperately into related form when the form is called to control the view, transaction nature etc.
as the design involve other system who passed the data in, i not really plan to change it as it involve interface between 2 systems instead try other possible ways (simple and less impact).
i think i should not say it use up all 32k, i just curious why the application declare the length as 32k over the forms design time but the actual length was only limited to 4k during forms execution time on Oracle AS r2.
thanks for suggesting me to try the copy build in and i will try it & post the result tomorrow. i think it should work because i saw your quote for the documentation here:
In Oracle Forms 10g, all parameters of datatype CHAR are limited to 4000 bytes when set or referenced using PL/SQL bind variable notation; for other usages no limit is imposed.
as the "copy" build in does not use the parameter as PL/SQL bind variable, quite large posibilities it works...will try and update the result tomorrow....
another question: where did you get the documentation for oracle forms?? i'm searching around and still cant find the quote that you copy from documentation. hopefully you can give me the link for my future reference.
Edited by: cy82 on Jun 16, 2010 9:58 PM

Measuring Point during IK01 not allowing characteristics with CHAR type

Similar Messages

Maybe you are looking for