Mechanism for Monitoring Application and Feedback

Hi All,
Is there a way to report the errors happen on user sites?
We built the applications, tested them then deployed them, but we have no mechanism to monitor/ watch how these websites being used on the customer/user side.
I was wondering if this something can be implemented on page level or application level to send feedback on any error or unexpected issue raises when users using the websites?
thanks,
Fadi.

Hi,
This may help you at start
http://www.yocoya.com/pls/apex/f?p=YOCOYA:PAGER:0:::::
br, Jari

Similar Messages

I'm wondering if there is any way to view the results of the form other than in a spreadsheet? Is it possible to print responses one by one in PDF format, or word, etc? I'd like to create a form for proposal applications, and the spreadsheet format resu

I'm wondering if there is any way to view the results of the form other than in a table? Is it possible to print responses one by one in PDF format, or word, etc? I'd like to create a form for proposal applications, and the spreadsheet format results are nearly unusable for this type of form.

Hi Nalani500 ,
Yes, you can print the response in a PDF by following the steps suggested below.
1) Go to the response file
2) Select the response you want to print
3) Click on Save as PDF button and it would save the selected response in PDF format.
Thanks,
Vikrantt Singh

What to do when you pay for an application and it ...

What to do when you pay for an application and it fails to install? I paid for an application, but it fails to install. I have no idea how to contact Nokia (the ovi store is quite bad in this). Also, does anyone have technical suggestions of were to look at to troubleshoot?
Rimugunides O'Brian

You can contact Nokia using the "Contact us" tab to the top right of this screen. I am sure they will be able to assist you or at least point you in the right direction.

Installed 11.0.3 today. Tried to update apps. iTunes response was, "You can not update this software since you have not owned the major version of this software." I REALLY don't understand. I paid for MANY applications and stole or borrowed NOTHING.

Installed 11.0.3 today. Tried to update apps. iTunes response was, "You can not update this software since you have not owned the major version of this software." I REALLY don't understand. I paid for MANY applications and stole or borrowed NOTHING.

Hi 969Polyglot969,
You may want to report an issue with the affected apps using the instructions in this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
I hope this helps!
- Ari

MP for monitoring winsrv2012 and winsrv2012R2

hi,
I use SCOM2012. When I try to add some components in a DA for the system that runs on winsrv2012 or winsrv2012R2 all the components on the server does not appear in SCOM.
I wonder if I need to import a certain management pack for monitoring winsrv2012 and winsrv2012R2?

Hi
If you want to build a DA you Need to have the objects. In order to get the objects in SCOM you Need a Management pack which discovers the objects / components. In your case i would start with the Windows Core MP
http://www.microsoft.com/en-us/download/details.aspx?id=9296 and then if you miss more objects check the other MP
http://social.technet.microsoft.com/wiki/contents/articles/16174.microsoft-management-packs.aspx
Cheers,
Stefan
Blog: http://blog.scomfaq.ch

HT4873 How i can recover deleted files from icloud,,I had a backup copy on iCloud for whatsapp application and I lost it,,I need bring it back what I have to do

How i can recover deleted files from icloud,,I had a backup copy on iCloud for whatsapp application and I lost it,,I need bring it back what I have to do

You can't download pictures from iCloud by logging into icloud.com. If you deleted pictures from camera roll AND photo stream, the only possibility is preforming a restore from an iCloud backup, assuming the backup has the pictures in it. (Many users have been unable to restore and get back their pictures.)
If the restore doesn't have all the pictures, then they are gone.
In the future, use photo stream to sync photos from an iPhone to a computer, then copy the photos on the computer from the photo stream album into a permanent album. Photo stream pics stay there only for 30 days, and only up to 1000 photos are stored. Don't use photo stream as a storage medium, it's only for copying photos from one device to another. Always copy (either via USB cable or photo stream) to a computer and then move to an album.

Mechanism for monitor java application or JVM

Ladies & Gentleman,
I develop Java application under Windows 2000 datacenter. For gurantee to capture all of abnormal situation of java application and also JVM, I need to know how to capture the situation. Do any other tools to do these things? I am very appreciated if you could tell me.

You don't exactly need any specific tools to just capture exceptions, that can easily be done by wrapping the program you want to monitor with your own main() method and adding some shutdown hooks...
But it would be nice to know what you want to do once it happens....
Regardless of which, here's an example of that wrap...
import java.lang.reflect.*;
public class Watch extends Thread
     public void run()
          System.out.println("VM is closing down");
     public static void main(String[] args) throws Exception
          if (args.length == 0)
               System.out.println("You must supply the name of the class to start with.");
               System.exit(1);
          Runtime.getRuntime().addShutdownHook(new Watch());
          try
               Class theClass = Class.forName(args[0]);
               Method theMethod = theClass.getDeclaredMethod("main", new Class[]{String[].class});
               String[] theNewArray = new String[args.length - 1];
               System.arraycopy(args, 1, theNewArray, 0, theNewArray.length);
               System.out.println("Starting program with class "+args[0]+"...");
               theMethod.invoke(null, new Object[]{theNewArray});
               System.out.println("Program is done running.");
          catch (ClassNotFoundException cnfe)
               System.out.println("No such class: '"+args[0]+"'");
          catch (NoSuchMethodException nsme)
               System.out.println("The class "+args[0]+" has no main method.");
          catch (SecurityException se)
               System.out.println("Can't start: "+se.getMessage());
          catch (IllegalAccessException iae)
               System.out.println("Can't invoke main method in class "+args[0]+": "+iae.getMessage());
          catch (Exception ite)
               System.out.println("Exception occurred when running class "+args[0]+": "+ite.getMessage());
}You can easily just swap those System.out's for something else.
However, if you mean watching the process from outside the VM, then you need something else, I suppose.
/F

Web service interfaces for monitoring Hosts and instances with SAPHostControl, saphostexec and sapstartsrv

Hi All,
I need to develop a monitoring application for SAP system which will monitor both Host systems and instances.
For this I need to collect Host data as well as instance data. In the below links I could find the SAP netweaver
monitoring agents
Monitoring Hosts with SAPHostControl and saphostexec - Infrastructure of the SAP NetWeaver Management Agents - SAP Libra…
Central Monitoring with SAP NetWeaver Management Agents - Infrastructure of the SAP NetWeaver Management Agents - SAP Li…
Administration/Monitoring of SAP Components with sapstartsrv - Infrastructure of the SAP NetWeaver Management Agents - S…
These links tell that CCMS agent is replaced by these agents from SAP Netweaver 7.0 Eph 2.
I found below doc which explains "How to use the SAPControl Web Service Interfaces" exposed by "sapstartsrv" to execute instance specific tasks,
But it does not tells any methods/APIs/webservice interfaces specific to Host system or get OS data using "saposcol".
SAP Control WebService
Similar to this, Is there any API/webservice to retrieve the OS and Host related data??.
Also, Is there any other doc for SAPHostControl or saphostexec similar to sapstartsrv ??
Thanks,
Swapnil

Hi Swapnil,
I too wanted this info and came across these.
Take a look at these urls :-
http://localhost:1128/SAPHostControl/?wsdl
http://localhost:1128/SAPOscol/?wsdl
grep saphost /etc/services
saphostctrl 1128/tcp # SAPHostControl over SOAP/HTTP
saphostctrls 1129/tcp # SAPHostControl over SOAP/HTTPS
Hope this helps.
Cheers
Craig

HOw to create a Batch file for java application and whats the use of this ?

HI,
How to create a Batch file for java application ?
And whats the use of creating batch file ?
Thanks in advance

First of all, you're OT.
Second, you can find this everywhere in the net.
If you got a manifest declaring main class (an classpath if needed), just create a file named whatever.bat, within same directory of jar file, containing:
javaw -jar ./WhateverTheNameOfYourJarIs.jar %*By the way, assuming a Windows OS, you can just double click the jar file (no batch is needed).
Otherwise use:
javaw -cp listOfJarsAndDirectoriesSeparedBySemiColon country/company/application/package/className %*Where 'country/company/application/package/' just stands for a package path using '/' as separator instead of '.'
Don't specify the .class extension.
Javaw only works on Windows (you asked for batch, I assumed .BAT, no .sh), in Linux please use java.exe (path may be needed, Windows doesn't need it 'cause java's executables are copied to system32 folder in order to be always available, see PATH environment variable if you don't know what I'm talking about) and use ':' as classpath (cp) separator.
The '%***' tail is there in order to pass all parameters, it only works on Windows, refer to your shell docs for other OSs (something like $* may work).
This way you have a command you can call to launch your code (instead of opening NetBeans just to see your app working). You could schedule tasks on it or just call it in any command prompt (hope you know what it is 'cause there have been people in this very same forum with no clue about it, if not just hold the 'Windows button' and press 'R', then type 'cmd' and run it).
Finally add dukes and give 'hem away.
Bye.

Looking for best application and stylus for iPad

I am looking to download an application for an ipad to use with a stylus, but don't know which application or stylus is best. Please share your opinion on the best application and stylus for taking handwritten notes.

Procreate is the only good reason to own an iPad, it has support for the top three stylus. However iOS7 has broken the Bluetooth Bridge that Pogo Connect, Wacom and Jot need to give pressure sensitive support. Procreate hardly works now.. except..you want to finger paint.
But when it is fixed I would suggest buying the Pogo Connect and a set of nibs and if I had only one App to use it with I'd use Procreate. It's vastly superior to many desktop Apps too.
However, Apple relying on third party Stylus support only makes my MS Surface Pro look like where I'll be spending my cash on the next upgrade cycle. Why Apple has not come out with an iPad Pro is a stunning insult.

Material for CROSS APPLICATIONS and NETWEAVER

Hi all
can u give links to sites that have good material on CROSS APPLICATIONS and NETWEAVER.
Regards,
Navaneeth

Hi,
NetWeaver is an application builder from SAP for integrating business processes and databases from a number of sources while exploiting the leading Web services technologies. Part of the company's mySAP product group, NetWeaver is getting a lot of industry attention as the first fully interoperable Web-based cross-application platform that can be used to develop not only SAP applications but others as well. NetWeaver allows a developer to integrate information and processes from geographically dispersed locations using diverse technologies, including Microsoft's .NET, IBM's WebSphere and Sun's Java technologies.
NetWeaver has been tagged as a product that could help spur industry adoption of Web services. Although Web services are often seen as the development model of the future, the implementation rate has not been high, often because of competition and incompatibility between enabling products
We have a forum itself for Netweaver.
https://www.sdn.sap.com/irj/sdn/collaboration
1. http://searchsap.techtarget.com/searchSAP/downloads/Joshua_Greenbaum_Talk_818.ppt
2. http://www.sapgenie.com/netweaver/
3. http://www.sap.com/solutions/netweaver/index.epx
4. http://www.sap.com/solutions/netweaver/components/portal/index.epx
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/nw/sap netweaver for dummies chapter one.pdf
/people/dominic.uliano/blog/2004/05/31/sap-netweaver-for-dummies-why-youre-not-a-dummy-for-reading-this-book
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/nw/sap_netweaver_for_dummies_ch13.pdf
https://www.sdn.sap.com/sdn/search.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fSDN!2fiViews!2fWCM!2fcom.sap.sdn..wcm.search.search_adv_0%3FSearchVisible=false%26SelectedCustomProps=sdn_product(value=SAP Netweaver)%26SearchPluginName=sdn_library
Books: SAP NetWeaver for Dummies
Hope it helps you.
Regards,
Anjali

Transaction for monitoring memory and resources on BW server

hi experts
I have the task to determine what occurred from an hour specified on few minutes, because there was a process or program ( we don't know ) which collapse memory and resources on BW server. I check throw SM37 if some Job was executed but no one was. I need a transaction for monitoring / checking memory and resources.
Please I will appreciate any helpfull information.
Regards
mgg

Hi
You can use ST03 / ST03 N also check ST04, ST06 . If you have access to the service market palce please check SAP Note - 618868 ( FAQ: Oracle Performance ) and related notes for more help.
Hope this helps
Assign points if useful
Regards

Common Supplier master database for Custom Applications and Oracle Financia

Hi,
We would like to build a custom applications (Multiple) for our organization core business operations using .NET on the database which is being used by Oracle financials R12.1.1. These custom applications are going to have its own application servers. BUT the database is common for both custom applications and oracle financials. This database is going to house on the Oracle RAC.
We would like to have a common supplier master for both custom applications and Oracle payables. Could you please help me with below questions?
1. How to create/Update/Query the supplier records in the supplier master tables provided by Oracle financials using custom applications?
2. How can we store the additional data elements needed by each custom application? We can't use the DFF on the supplier tables as the data elements for each custom application is going to be different. even though they use same supplier.
3. We might have multiple supplier with same name but different FEIN/SSN numbers. As per the design Oracle financials doesn't allow the same supplier name entered multiple times even though FEIN/SSN number is different. How can we workaround this limitation?
Thanks,

Hi,
Please find my comments below:
1. How to create/Update/Query the supplier records in the supplier master tables provided by Oracle financials using custom applications?
A: You may use Supplier Open interface and Sites Interface to Create the Supplier Records. I don't think there is any API to update Supplier Info. Since both the applications exist on same database, I think you can query the Vendor tables from Custom applications also.
2. How can we store the additional data elements needed by each custom application? We can't use the DFF on the supplier tables as the data elements for each custom application is going to be different. even though they use same supplier.
A. Designing different tables depending on Custom Application ID and Vendor ID seems to be the only option.
3. We might have multiple supplier with same name but different FEIN/SSN numbers. As per the design Oracle financials doesn't allow the same supplier name entered multiple times even though FEIN/SSN number is different. How can we workaround this limitation?
A.One alternative is to create a single supplier with each FEIN/SSN number as site. Second one is to create Supplier Name concatenated with FEIN/SSN numbers as different suppliers and store the actual name in some DFF or other field. Standard functionality won't allow such duplication (Cannot Create Supplier/Employee With The Same Name Of Existing Supplier [ID 743430.1]).
Hope it helps.
Regards,
Sridhar

Unable to use debug mode for x64 application and debug doesn't work when target cpu set to x86

I am attempting to familiarize myself with Visual Basic programming in Visual Studio 2008, using the Visual Basic Guided Tour in Microsoft Visual Studio 2008 Documentation, and have run into a bit of a road-block. When following the lesson "It
Doesn't Work! Finding and Eliminating Run-Time Errors", the IDE does not allow me to edit the code when the debugger hits the intentionally programmed runtime error (divisor set to 0). It gives me an error that "Changes to 64 bit applications
are not allowed". I found some forum postings advising to set the project's Target CPU from "Any CPU" to "x86". However, when I do that, and re-execute the debug process, the debug fails to stop on the overflow/divide by
zero error.
How can I debug my programs when Any CPU/x64 target doesn't allow me to edit the code, and x86 target doesn't appear to recognize obvious runtime errors.

Hi Tim,
>>the IDE does not allow me to edit the code when the debugger hits the intentionally programmed runtime error (divisor set to 0). It gives me an error that "Changes to 64 bit applications are not allowed".
I'm afraid that the VS2008 has a limitation for this feature, I mean that Edit and Continue isn't supported on 64-bit.
Reference:
http://stackoverflow.com/questions/1498464/changes-to-64-bit-applications-are-not-allowed-when-debugging-in-visual-studio
http://blogs.msdn.com/b/habibh/archive/2009/10/12/how-to-edit-code-when-debugging-a-64-bit-application.aspx
But this feature has a improvement in VS2013 now:
http://blogs.msdn.com/b/visualstudioalm/archive/2013/06/26/debugging-support-for-64-bit-edit-and-continue-in-visual-studio-2013.aspx
So if possible, you could test it in the latest VS2013 version.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SAP HANA Cloud Portal : Make Widget For Java Application and Display in HANA Portal

Hi Experts,
I have created one Java Application using eclipse luno.
I have successfully deploy on my hanatrial version and able to see the Started Application under the Java Application.
Can anyone have idea how to use this application in HANA portal and display/ run this Java Application in SAP HANA Cloud Portal Website.
I want to know is it possible or not ? and yes then how its possible ?
What are the steps require to make Widget for this java apps and publish on portal.
Many Thanks,
Mithun

Hi Mithun,
yes it's possible and relatively easy - follow Chapter 7 of the guide -
ESPM WebShop Extension
Regards
Kenny

Mechanism for Monitoring Application and Feedback

Similar Messages

Maybe you are looking for