Message contents in sxmb_moni

Dear All,
We are working on PI7.0.
when we see message in sxmb_moni, it is showing only the Incoming message only but dosen't show the message after mapping.
Please help us know how we will be able to see the message after mapping in sxmb_moni.
with regards,
Ravi Siddam

>
Ravi Siddamsettiwar wrote:
> As per our knowledge we can archive only the messages in Integration Engine and not in adapter engine. The message from AE will be automatically get deleted once its time limit exceeds, generally it is 30 days.
>
> Ravi Siddam
No, you can archive adapter messages also.
Make a CTRL+F for "Archive Messages" in
http://help.sap.com/saphelp_nw70/helpdata/EN/8f/d906d01f77fa40a4c84683c3f8326f/content.htm
So, you can follow the [archiving procedure in IE|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/402fae48-0601-0010-3088-85c46a236f50&overridelayout=true] for Incoming messages and [archiving procedure for Adapter Messages|http://help.sap.com/saphelp_nw70/helpdata/EN/8f/d906d01f77fa40a4c84683c3f8326f/content.htm] for outgoing messages
Regards,
Ravi Kanth Talagana

Similar Messages

Message content in proxy - urgent

Hi,
I need to know, how we can know, which messages have passed through the proxy interface in R/3 system. The message content, specifically (like the one we see in sxmb_moni)
Remember that XI is NOT involved in this communication.
Hence we cannot look into the XI system.
Message flow is direclty from a Web service to R/3.
PLease remember that I am not asking about debugging or creating the proxy.
Thanks,
John

HI JOHN,
Then the proxy which u r talking is not XI ABAP proxy.If that is the case u cannot see in the SXMB_MONI.
just put a external break point to u r proxy in backendsystem and check what is the message flow in.
If u post in XI forum saying Proxy, all would think XI proxies.
so be calm in explaining to get u r answer
rgds
srini

Not able to see Message Content while using SOAP Adapter

Hi freinds
I am working on following scenario
Web Application ---> SOAP Adapter ---> XI ---> RFC Adapter ---> SAP R/3
Web application is using the WSDL file which I generated from XI.
Now everything is going fine & I am even getting the XML data in SAP R/3 ( Order is getting created ) but in RWB under message monitoring I am getting " <b>Content of message deleted to save memory</b> " for message content.
Even in SXMB_MONI for that timeframe it is showing " <b>No messages available for selection</b> ".
Can you tell me why I am not getting the message content & the message itelf in SXMB_MONI. What I need to do in order to get the message content while monitoring.
Best Regards
Lalit
P.S --> I am able to see the message content if I am using File Adapter in place of SOAP Adapter

Hi
After adding the LOGGING_SYNC parameter with value 1. I am able to see the messages in sxmb_moni but they have status as " System Error - Restart not possbile " with the following error ::
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>402</SAP:P1>
<SAP:P2>ICM_HTTP_TIMEOUT</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>SAP Web Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://sapxidev:50000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP Web Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://sapxidev:50000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://sapxidev:50000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2>500 Connection timed out</H2><br>Connection timed out (-5) <br><hr> <table border="0"> <tr><td>Error:</td><td>-5</td></tr> <tr><td>Version:</td><td>6040</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed Dec 21 13:59:55 2005 </td></tr> <tr><td>Module:</td><td>icxxthr_mt.c</td></tr> <tr><td>Line:</td><td>2559</td></tr> <tr><td>Server:</td><td>sapxidev_XID_00</td></tr> <tr><td>Detail:</td><td>Connection to partner timed out</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2003, SAP AG</a></FONT></td></tr></table></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when receiving by HTTP (error code: 402, error text: ICM_HTTP_TIMEOUT)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
As my payload was of 100 records with 15 fields I guessed that this can be the reason I am getting timed out. So next time I just send 2 records & this time no error & everything went fine.
Now one thing I need to do is to increase the TIMEOUT value with the help of <b>OSS Note 824554</b>.
But still in RWB ( with 2 records also ) under message monitoring I am getting " <b>Content of message deleted to save memory</b> " for message content.
My objective now, is to display the payload which is coming from Web Application via SOAP Adapter in RWB. Can you help me in this.
Best regards
Lalit Chaudhary

Cannot send email via AOL on iPad2 - "A copy has been placed in your Outbox. Sending the message content to the server failed."

My CEO has an ipad2 and I set it up w/ AOL. She cannot send any email via her AOL account from her iPad. She gets a message that says "A copy has been placed in your Outbox. Sending the message content to the server failed." We've tried it on wifi and on 3G (Verizon version). I've removed the account and added it, I've tried setting it up as an IMAP account vs. using Apples standard AOL mail setting and nothing seems to work. The SMTP settings are smtp.aol.com, port 587. I've tried adding an alternate server/smtp, but I haven't been able to find anything that works. Any advice or other people having this issue? It works fine sending an email from her aol web mail. And unfortunately, having her sign up for a gmail account is not an option. Thanks

Interesting. Firstly I have been on AOL since the early 90s with no current intention to switch as my primary personal email account.
I have two email accounts on my iphone - AOL and my email from my business website. I deleted both and then recreated first the business account and then the AOL account. Same error. Then I wasn't sure what you suggested but I turned off the AOL SMTP server and selected the business email SMTP server by turning it on with the same result. I still get the error "A Copy has been placed in your Outbox. Sending the mssage content to the server failed."
Perhaps this problem will get fixed by IOS 6. AOL will not talk to me unless I pay and Apple says its not their problem. So for the time being I use the AOL web interface in the iPhone's Safari to send emails from the phone.

TS3899 Tried all the tips on line. Every time I try to send an e-mail, it gives me this message, "A copy has been placed in your Outbox. Sending the message content to the server failed" Any help in how to resolve would be appreciated

I went through all the steps to try to resolve getting the message in a box every time i try to send an e-mail. What next ?
Message is " A copy has been placed in your
Outbox. Sending the message content to the server failed."
Any assistance would be greatly appreciated. My internet works fine as I can send e-mails from my Yahoo account on my MAC no problem.
Address is fine etc.

How long has it been going on? I've had my yahoo mess up and if i wait a bit it resolves itself. Yahoo is doing something with their servers and it messes with your mail if your mail happens to be on one of those servers.

Sending email error with Yahoo: "A copy has been placed in your Outbox. Sending the message content to the server failed."

HELP! Why am I getting this error message? It's driving me crazy! When I try to send an email, the message stalls in the outbox and the following message pops up - "A copy has been placed in your Outbox. Sending the message content to the server failed." I have deleted and reinstalled the account, restarted the phone, etc - what the heck? The emails work just fine at Yahoo online, so the account it fine...I don't want to hard reset the phone, as I had to do that recently and it's a pain - any suggestions?

OR they are the right settings but you are trying to send through a different internet provider or 3G provider, that does not allow that SMTP server to send email.
if I send email from 3g or someone elses wifi on a different ISP, it will not work, because it does not allow that server to be contacted. this is normal.
What you want to do is setup a gmail account and use their SMTP server settings for the defauly outgoing server. that way you dont have to worry about this.

A copy has been placed in your outbox. sending the message content to the server failed. my iphone email

I have been using my iphone for almost a year and after my email address was hacked yesterday by a diet berry fake email, i can send out an email from my phone. I have removed, rebooted, removed, etc.....and changed my password, still can't send out an email.
Error Message: A copy has been placed in your outbox. Sending the message content to the server failed.
Thanks

OR they are the right settings but you are trying to send through a different internet provider or 3G provider, that does not allow that SMTP server to send email.
if I send email from 3g or someone elses wifi on a different ISP, it will not work, because it does not allow that server to be contacted. this is normal.
What you want to do is setup a gmail account and use their SMTP server settings for the defauly outgoing server. that way you dont have to worry about this.

A copy has been placed in your outbox. sending the message content to the server failed

all of the sudden my phone wont send emial but will receive them. I have tried everything suggested as far as turn on/off, delete acct and set it up again and nothing seems to be working. Can someone help me please?? the error message i receive is "a copy has been placed in your outbox. sending the message content to the server failed"

I think what happened to me was that my yahoo account was compromised by http://thenextweb.com/insider/2013/01/07/yahoo-mail-users-hit-by-widespread-hack ing-xss-exploit-seemingly-to-blame/
Yahoo responds to these reports at the end saying they fixed the issue. I think what that my mobile yahoo mail was somehow blocked by yahoo because that was the device that i logged into right before (the hacker) blasted all of my inbox. That is the only thing I can think of. Exactly 24 hours later I was able to send email. I did figure out that for the iPhone 4gs you can go into your settings and yahoo mail and change the outgoing server from yahoo to gmail if you have gmail set up on your phone and that will allow you to send from yahoo through gmail. I also sent a feedback form to yahoo, that is the only way to contact them, and have heard nothing. There is nothing about this on their support site. So let us know if after 24 hrs you are magically able to send. Yahoo really should use that log in history where they can see that a log in has occurred from a strange IP to block that and warn the user. My log in history right before this happened went: home IP in the US, home IP, homeIP, home IP, Morroco, home IP, home IP, etc. So it is blatantly obvious. My little software company can block IP's, I know yahoo can.

Error 554-5.6.0 Corrupt message content... when sending emails to other users on same exchange server

Hello
I have a very strange problem at a customer from our company.
The problem happens to only one user on the Exchange 2010 organization (SP3, no additional patches installed, Server is 2008 r2).
When this specific user sends an email to one or more users on the same Exchange organization, he gets sometimes (not always) the following error back:
554-5.6.0 Corrupt message content 554 5.6.0 STOREDRV.Deliver.Exception:ConversionFailedException; Failed to process message due to a permanent exception with message Inhaltskonvertierung: Fehlerhafter TNEF-Zusammenfassungsinhalt. ConversionFailedException:
Inhaltskonvertierung: Fehlerhafter TNEF-Zusammenfassungsinhalt. [Stage: CreateReplay]
So - TNEF, corrupt message Content... I googled the error and checked all the recommended Solutions. The Outlook Client is ok, I have doublechecked it and everything is configured like it has to be.
The Problems happens as above described only for one user when he writes emails to users from one specific Domain on the same Exchange organization (example
[email protected]).
He has this specific contacts in a SharePoint contact list which is connected to his Outlook Client.
Thanks for any help or Information!
Regards

Hi,
According to your description, I understand that one user cannot send message with error “554-5.6.0 Corrupt message content 554 5.6.0”.
If I misunderstand your concern, please do not hesitate to let me know.
I want to double confirm whether it works or not when send message to external address, how about the OWA?
It seems that message has corrupt content. Is there any 3rd prevent software or Anti-Virus software in Exchange 2010?
Regarding this issue, firstly I would like to explain that content conversion occurs in two places, that are the Store Driver and the Content Conversion stage of Categorization. Since the issue exists in the delivery mail of internal user, the agent that was
used in the process of handling by Store Driver may cause this issue.
Please try to enable pipeline tracing and content conversion tracing to get more details about this error, for your reference:
Content conversion tracing:
http://technet.microsoft.com/en-us/library/bb397226.aspx
Pipeline tracing:
http://technet.microsoft.com/en-us/library/bb125018.aspx
Best Regards,
Allen Wang

I can no longer send mail....today I cannot get mail..., I can no longer send mail....today I cannot get mail...a message pops up that says:A copy has been placed in your outbox.Sending the message content to the server failed....any help?

I can no longer send mail....today I cannot get mail..., I can no longer send mail....today I cannot get mail...a message pops up that says:A copy has been placed in your outbox.Sending the message content to the server failed....any help?

How long has it been going on? I've had my yahoo mess up and if i wait a bit it resolves itself. Yahoo is doing something with their servers and it messes with your mail if your mail happens to be on one of those servers.

How do I change my messaging settings to where it will show text message or iMessage instead of the actual message content

I've seen where a lot of people have changed their notifications to not show the message content but I can't find how to do it on my iPhone 5c

Go to settings->notification center and there is where you turn off the preview for the message show it shows you what you want. The iMessage or text message preview.

I'am getting an update error when am trying to upgrade to newer version (4.3.2)..the error message content shows that i tunes could not back up the i pod,because the back up was corrupt or not compatible with ipod..can anyone help me out to fix this issue

I'am getting an update error when am trying to upgrade to newer version (4.3.2)..the error message content shows that i tunes could not back up the i pod,because the back up was corrupt or not compatible with ipod..can anyone help me out to fix this issue

Hi,
Try here: http://support.apple.com/kb/HT1808.
Hope this helps!
---likeabird---

403 Forbidden error in RWB in the message content Tab

Hi
I am getting a 403 Forbidden errorn the page when I go to the Message content age in RWB while viewing the messages in AE .
Does any one know why is this error comming. I have chakd the roles of the system user and they ar fine.
Regards
Nikhil

Check thie troubleshooting guide and press CTRL + F to find string 403.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Regards,
ravi

PI 7.0 u2019Message Monotoringu2019 messages content 403 forbidden

Hi
After appling SPS 23 we do get this error when acsessing "messages content" in RWB u2019Message Monotoringu2019 ,
Service cannot be reached
What has happened?
URL http://srvsappid1hq.iccompanys.net:8011/sap/bc/gui/sap/its/webgui/! call was terminated because the corresponding service is not available.
Note
The termination occurred in system PID with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:SRVSAPPID1HQ_PID_11-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team

Hi,
Ref: /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Thanks,

Issue with Archiving & Deletion of messages in PI ,SXMB_MONI messages

Hello experts
I am working on Archiving & Deletion of messages in PI ,SXMB_MONI, i have fallowed all the steps which are avialable in /people/deepak.shah/blog/2010/04/22/archiving-deletion-of-messages-in-pi--part-2, but the messages still there in SXMB_MONI.
please help me to resolve this issue.
regards
chandra

Hi Krish
i have fallowed steps like....
in SXMB_ADM
>>>step 1: Define the interface for archivng and retnetion period
>>>step2):Schedule Archive Jobs,
after this i have checked the in SM37 the jobs got sheduled and released after that it showing finished.
>>>step3):ARV_BC_XMB_WRP<date> (archiving, step 1)
ARV_BC_XMB_DEL<date> (archiving, step 2)
here i am getting message like "0 XML messages got archived".
"0 XML message for deleated".
I have doubt in SXMBPMAST table here when i check the status of interface , ITFACTION field is containing the value INIT and if I understood correctly it job deletes only those messages where ITFACTION is set to DEL.
We are actually trying to delete the messages avoiding archiving but what I am seeing is we cannot delete error messages and for them we must have to go through archiving. Please correct me if I am wrong.
Thanks
Chandra

Message contents in sxmb_moni

Similar Messages

Maybe you are looking for