Message Format Exception

When I am trying to insert date object in to Message (using setObjectProperty()),
it is throwing MessageFormatException.
Can it not be any object which is serializable?
thanks
shiva.

properties can only be objectified primitve values (Boolean, Byte, Short, Integer, Long, Float, Double and String). see section 3.5.5 of the JMS specification.
_sjz.

Similar Messages

Message format exception when running TestProducer from EDM

Hi,
          I'm getting weblogic.jms.common.MessageFormatException: Illegal property name, 'error-contex
          t' error when running TestProducer from EDM. Does anyone know how i can change error-context to a string without - ? Or any suggestion to make it work ?
          Thanks,
          Jessie


Hi Jessie,
          As per the JMS specification, property names must be a legal identifier,
          similar to java variable names. I think the reason for this is
          that property names are used in selectors, and the parser would have
          no clue what do with an expression like:
          error-context > 10
          Tom
          Jessie Yau wrote:
          > Hi,
          > I'm getting weblogic.jms.common.MessageFormatException: Illegal property name, 'error-contex
          > t' error when running TestProducer from EDM. Does anyone know how i can change error-context to a string without - ? Or any suggestion to make it work ?
          >
          > Thanks,
          > Jessie

ADAPTER.JAVA_EXCEPTION - java.lang.Exception: no valid message format obje

Hi experts,
we have a problem when we call a web service PI (release 7.01 , SP 10), from legacy system : the PI system return this message : ADAPTER.JAVA_EXCEPTION ; - java.lang.Exception: no valid message format object found
For to test this scenario we use soapUI tool.
I tried the URL (... /XISOAPAdapter/HelperServlet?action=FindChannel ...) in IE and got the following response :
<?xml version="1.0"; ?>
- <s:ChannelInfo xmlns:s="http://sap.com/xi/WebService/xi30">
<channelID>11ccbb96a7f3349c895a005c9bc09cb7</channelID>
<name>CC_Soap_Sender_TestWS</name>
<type xmlns:st="http://sap.com/xi/XI/System">st:SOAP</type>
<direction>INBOUND</direction>
<party />
<service>BS_..........IDB_DEV</service>
</s:ChannelInfo>
so I think that this service is OK .
Thanks in advance for your help,
Alberto

Hi,
1) Check the URL once again- check for the extra spaces at the end of the link.
2) please refer below blog i hope it will help you
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4?QuickLink=index&overridelayout=true
Did you check the page no 14 of the document which has the same problem - in problem analysis it has mentioned that check the URL as well as proxy setting of internet browser.
3) Try to create the ID objects manually (Sender Channel and Sender Agreement).....when we use the wizard a * gets introduced in the unfilled (unused) fields (party etc) ....however when manually created the unused fields are left blank.
4) Check if all the ID objects are available in SXI_CACHE.
regards,
ganesh.

SMS: unable to open. message format not supported...

hey folks i've seen a bunch of guys asking this same question on another threads with no reply, is this a OS bug or something? from time to time i received SMS from my contacts and sometimes I am not able to open them and i got a message: "unable to open. message format not supported Symbian" even though i can read some text from the preview list.
any workaround?
thanks!
Powered by Nokia X6

try a reset there could be a file in the message which phone wont support
*#7370# security code 12345 back up your data 1st
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Powerpivot - Can't insert formula that combines two or more different columns and keep getting message "unhandled exception has occurred in a component in your application...

I am using powerpivot v2 with excel 2010.
When I go to my excel file's powerpivot and I try to insert a formula in any column, I constantly get the following message:
"unhandled exception has occurred in a component in your application. If you click continue, the application will ignore this error and attempt to continue".
************** Exception Text **************
System.InvalidCastException: Return argument has an invalid type.
at System.Runtime.Remoting.Proxies.RealProxy.ValidateReturnArg(Object arg, Type paramType)
at System.Runtime.Remoting.Proxies.RealProxy.PropagateOutParameters(IMessage msg, Object[] outArgs, Object returnValue)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Office.Interop.Excel._Application.get_ActiveWorkbook()
at Microsoft.AnalysisServices.XLHost.Addin.GeminiRibbon.currentClientWindow_InFormulaBarChanged(Object sender, EventArgs e)
at Microsoft.AnalysisServices.Common.SandboxEditor.formulaBar_Leave(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.ContainerControl.UpdateFocusedControl()
Does anybody know how to fix this ?

Mark,
I used the Fix It found here:
http://support.microsoft.com/kb/2739501
I would have to ask my IT support person for more specifics, but as I understand the scenario with my particular laptop: the laptop came preloaded with RTM build of 2013. We used Control Panel to uninstall Office 2013, in order to install Office
2010. I installed PowerPivot add-in and used it successfully with no issues for several months. After attempting to install another program and encountering issues with apparent traces left behind of Office 2013 uninstall, I found the link above
and used the Fix It to attempt to remove all remaining traces of Office 2013. While it did appear to find and clean-up quite a bit left behind from the Office 2013 install, I was surprised to find an error upon entering my existing installation
of PowerPivot for 2010 and attempting to type new formulas into the formula bar.
My experience to-date is that an error message stating ""Return Argument Has an Invalid Type" appears anytime I select or modify a formula in the formula bar that would cause the intellisense to appear. For example, when I first click into the formula
bar, I do not get an error...but as soon as I type the first letter, before the intellisense appears, I get the error message. Throughout the remainder of the formula as I type, just prior to any time when the intellisense drop-down will appear
again, I get the same error message again (see details below).
At one time, although I can't reproduce it now, the error message did state ".Net Framework" in the menu bar of the error pop-up window. I can't get that to appear again, as it now only says "PowerPivot for Excel". Based on this, I had attempted
to see if I could repair my .NET framework install using the following tool:
http://www.microsoft.com/en-us/download/details.aspx?id=30135
I learned, however, that since I am running Windows 8 which comes with .NET 4.5 built-in to the OS, this tool does not yet cover that version for repair.
While the overall end-result of my PowerPivot models appear to be just the same, having to click through "Continue" on the error message multiple times each time I enter a new formula is a huge drain on productivity.
Let me know if you have any additional questions.
David
System.InvalidCastException: Return argument has an invalid type.
   at System.Runtime.Remoting.Proxies.RealProxy.ValidateReturnArg(Object arg, Type paramType)
   at System.Runtime.Remoting.Proxies.RealProxy.PropagateOutParameters(IMessage msg, Object[] outArgs, Object returnValue)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.Office.Interop.Excel._Application.get_ActiveWorkbook()
   at Microsoft.AnalysisServices.XLHost.Addin.GeminiRibbon.currentClientWindow_InFormulaBarChanged(Object sender, EventArgs e)
   at Microsoft.AnalysisServices.Common.SandboxEditor.formulaBar_Leave(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Windows.Forms.ContainerControl.UpdateFocusedControl()
David Duncan Consultant I.B.I.S., Inc.

Com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.NullPointerException in sap pi

Hi all,
I am working on SAP PI 7.3.1 SP09. Currently we have interfaces which uses 50200 port. I have created a http destination from nwa pointing to https://....url. So all of a sudden all the interfaces went to error state. After debugging i found that the port 50200 is replaced with 50201which is https port. After changing the port to initial value ie., 50200 all interfaces are working fine except the one which were pointing to https url and they are showing the following error description.
<SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.NullPointerException</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The entire trace is as follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="3" type="T">Sender scheme external =</Trace>
<Trace level="3" type="T">Sender agency external =</Trace>
<Trace level="3" type="T">Sender party external =</Trace>
<Trace level="3" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Determining the sender agreement</Trace>
<Trace level="3" type="T">##### DG: 3</Trace>
<Trace level="3" type="T">##### TO: 3</Trace>
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine/?type=entry</Trace>
<Trace level="2" type="T">Request Line = POST /sap/xi/engine/?type=entry HTTP/1.0</Trace>
<Trace level="2" type="T">Host = 10.66.14.150:50200</Trace>
<Trace level="2" type="T">Server protocol = HTTP/1.0</Trace>
<Trace level="1" type="T">Remote address = 10.66.10.160</Trace>
<Trace level="1" type="T">User = SFUSER</Trace>
<Trace level="1" type="T">Process ID: 760</Trace>
<Trace level="1" type="T">Work Process ID: 10</Trace>
<Trace level="1" type="T">Message ID = 53BEFE7146893BD5E10000000A420AA0</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS">
<Trace level="1" type="T">CL_XMS_MAIN->DETERMINE_EXT_PID: CENTRAL</Trace>
<Trace level="3" type="T">##### DG: 3</Trace>
<Trace level="3" type="T">##### TO: 3</Trace>
<Trace level="1" type="T">Hop engine name = is.02.devpipd1</Trace>
<Trace level="1" type="T">Hop engine type = IS</Trace>
<Trace level="1" type="T">Hop adapter name = XI</Trace>
<Trace level="1" type="T">Hop adapter namespace = http://sap.com/xi/XI/System</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="3" type="T">system-ID = PD1</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = SFUSER</Trace>
<Trace level="1" type="Timestamp">2014-07-10T08:56:37Z INDIA</Trace>
<Trace level="1" type="T">ACL Check is performed</Trace>
<Trace level="1" type="T">XML validation is executed</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = BE</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">>>>PID delete old pid determination coding</Trace>
<Trace level="3" type="T">Pipeline-Elements for pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T">0001 PLSRV_XML_VALIDATION_RQ_INB</Trace>
<Trace level="3" type="T">0002 PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">0003 PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">0004 PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">0005 PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">0006 PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">0007 PLSRV_VIRUS_SCAN_RQ_OUT</Trace>
<Trace level="3" type="T">0008 PLSRV_XML_VALIDATION_RQ_OUT</Trace>
<Trace level="3" type="T">0009 PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">0010 PLSRV_VIRUS_SCAN_RS_INB</Trace>
<Trace level="3" type="T">0011 PLSRV_XML_VALIDATION_RS_INB</Trace>
<Trace level="3" type="T">0012 PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">0013 PLSRV_VIRUS_SCAN_RS_OUT</Trace>
<Trace level="3" type="T">0014 PLSRV_XML_VALIDATION_RS_OUT</Trace>
<Trace level="3" type="T">system-ID = PD1</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = SFUSER</Trace>
- <Trace level="1" type="B" name="CL_XMS_MESSAGE_PERS_MAN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="2" type="T">Persisting original message</Trace>
<Trace level="3" type="T">Message-Version = 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="Timestamp">2014-07-10T08:56:37Z INDIA Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_XML_VALIDATION_RQ_INB">
<Trace level="3" type="Timestamp">2014-07-10T08:56:37Z INDIA Start of pipeline service processing PLSRVID= PLSRV_XML_VALIDATION_RQ_INB</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_XML_VALIDATION_RQ_INB</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_VALIDATION</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_XMS_PLSRV_VALIDATION-ENTER_PLSRV">
<Trace level="3" type="T">Pipeline Service = PLSRV_XML_VALIDATION_RQ_INB</Trace>
<Trace level="3" type="T">Skip Inbound Validation =</Trace>
<Trace level="3" type="T">Skip Outbound Validation =</Trace>
<Trace level="3" type="T">Area = XML_VALIDATION_INB</Trace>
<Trace level="1" type="T">Reading sender agreement</Trace>
<Trace level="1" type="T">Message does not contain a sender agreement</Trace>
<Trace level="1" type="T">Inbound validation by Integration Engine does not take place</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="3" type="Timestamp">2014-07-10T08:56:37Z INDIA End of pipeline service processing PLSRVID= PLSRV_XML_VALIDATION_RQ_INB</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MESSAGE_PERS_MAN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="3" type="Timestamp">2014-07-10T08:56:37Z INDIA Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T

HI,
Thank you for your hint. Maybe I just forgot to mention one important fact. We have second SAP Netweaver PI 7.1 which is completely our system. The first one I mentioned in first message is the customer's one. The one we have extra is also connected to MAXIMO and GIS. Settings of this interface is completely same among one thing:
Patch level of XIAF:
1. customers SAP PI level is
Adapter Common Library Version: 1.7.1007.20081105173106.0000, NW07_07_REL (2008-11-07T17:29:47+0000)
Adapter Application Version: 1.7.1007.20081105173106.0000, NW07_07_REL (2008-11-07T17:30:00+0000)
2. our SAP PI level is
Adapter Common Library Version: 1.7.1008.20100215155230.0000, NW07_08_REL (2010-02-15T17:19:21+0000)
Adapter Application Version: 1.7.1008.20100215155230.0000, NW07_08_REL (2010-02-15T17:19:31+0000)
Both of them has Axis Version: Apache Axis version: 1.4 Built on Apr 22, 2006 (06:55:48 PDT)
Also important to mention is fact that same problem happened in our SAP PI, but we implemented last patch of XIAF and it has suddenly started to work. I have suspicion it is somehow connected to this patch. Btw. this patch contains a lot of notes regarding AXIS framework (i.e. 1435998, 1150375, 1048268), so obviously some bugs of the AXIS adapter has been resolved by this patch.
What do you think ?
Thanks

Send Alerts(e-mail) for errors in SXMB_MONI(message mapping exceptions)

Good afternoon !
        I´m configuring SAP Netweaver PI 7.0(SP13) to use Alert Framework to send Alerts when errors occurs in the interfaces processing.
        I just achieved configure to send alerts when errors ocurrs in the Adapter Framework but, I can´t configure correctly to send alerts when errors ocurred only in SXMB_MONI(for example, message mapping exception in asyncronous interface).
        I just followed the instructions at Michal Krawczyk
weblog(/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step) and, initially, this was not sufficient to start to send alert when errors occurs only on SXMB_MONI, so, I researched and found some configurations to do in CCMS(started from here: http://help.sap.com/saphelp_nw70/helpdata/en/e3/bf3b7a8ccb8040b638ff732c551aeb/content.htm), jobs to start events collectors, etc, and after this, I could see a mail for an message mapping exception. BUT, this message, sent from CCMS to ALM, doesn´t carry out all the message parameters, like message Id, sender(service, interface), receiver(service, interface), that is very important to help to find the message with errors to be solved.
        There is somebody here that already done the Alert configuration to send messages for errors found only in SXMB_MONI(Monitor for processed XML Messages) ?
        There is a better way to achieve this ?
        Thank you for your attention,
        Wilson Rodrigo dos Santos
        SAP Netweaver XI/PI Consultant

Hi
Go through these links and follow it.
ALERTS CONFIG AND STUFF
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
XI: Alerts - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
Triggering by Calling a Function Module Directly.
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Alerts with variables from the messages payload (XI) u2013 UPDATED
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Simple Steps to Get Descriptive Alerts from BPM in XI
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Triggering XI Alerts from a User Defined Function
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Throwing Smart Exceptions in XI Graphical Mapping
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/sravya.talanki2/blog/2006/11/22/error-handling-framework-xiout-of-the-box-episode-1
/people/ginger.gatling/blog/2005/06/16/integrating-alerts-into-uwl--its-no-problem
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.ht
http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
check this links.
https://www.sdn.sap.com/irj/sdn/forums
Trouble shooting Alert configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Defining Alert Classifications
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Triggering Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
Alert Notification
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
/people/matt.kangas/blog/2006/06/27/personalized-alert-delivery
Thanks
Saiyog

Adding custom message in exception list of F110 transaction without adding payment block

Hi All,
My requirement is to add custom message in exception list of F110 transaction based on certain fields validation without adding payment block .
I tried using BTE 1820 where I can add my validation but am not able to add the custom message in exception list.
Thanks,
Mihika.

Hi Raymond,
Thanks for your reply.
I did checked the document and tried giving the S and I message in my BTE with trace option checked on Additional log screen.
But Success and information message doesn't showed in Exception List.
If I set the Error message the Proposal gets cancelled and I can see my error message in log. (We don't want this option as in this option proposal is not getting created)
If I set the Payment block I can see that logged in exception list. But we don't want to set the payment block but the message should appear in exception list.
I added the message using simple message statement. Will you please advice if any other way to add the message other than using the MESSAFE statement.
Thanks,
Mihika.

Messages in multi-message format can only be sent to one Adapter Engine

Hi,
Using XI 7.0 SPS 12 I have a scenario Single Flat File->XI->Multiple Messages to ECC.
Due to an annoying limitation/bug in ECC we have to send workorders in to be processed as individual transactions. This means generating seperate calls to ECC from PI.
I've adjusted my message map (No BPM) to split the source messages out, but when it calls the XI adapter to send them to ECC I get the following:

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
SOAP:mustUnderstand="">
     <SAP:Category>XIServer</SAP:Category>
     <SAP:Code area="OUTBINDING">CO_TXT_MMF_ENGINETYPE</SAP:Code>
     <SAP:P1/>
     <SAP:P2/>
     <SAP:P3/>
     <SAP:P4/>
     <SAP:AdditionalText/>
     <SAP:ApplicationFaultMessage namespace=""/>
     <SAP:Stack>
     Messages in multi-message format can only be sent to one Adapter Engine
     </SAP:Stack>
     <SAP:Retry>M</SAP:Retry>
</SAP:Error>
I am generating multiple structures under
messages/message1/xx_my_structure_repeated_at_this_level
which gives the correct amount of payloads in moni.
I believe this error is because the http/idoc adapters dont go through the AE and it is the AE that splits the multiple messages into individual calls. Is there a clean workaround which doesnt involve BPM or intermediate writing to disk etc?
Thanks
James.
Points awarded where appropriate.

<i>I believe this error is because the http/idoc adapters dont go through the AE and it is the AE that splits the multiple messages into individual calls.</i>
Perfectly correct
<i>Is there a clean workaround which doesnt involve BPM or intermediate writing to disk etc?</i>
May be writin a module.
Otherwise to avoid other development time, go for BPM.
Regards,
Prateek

Synchronous scenario(ABAP proxy to HTTP_AAE) getting error exception as "Message Expired Exception"

Dear All,
I have done all the configuration for ABAP proxy scenario using AAE/ICO as per the below "how to guide" using SOAP as sender adapter using xi protocol. My SAP PI is 7.4 dual stack system. here third party is not a webservice its HTTP based we server so no wsdl.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b?overridelayout=t…
However after running the scenario from ECC I am getting the exception as "Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message 53289257-97e0-06d0-e100-00000a70d384(OUTBOUND) expired.". I do not have any connection problem to third party(bank) URL. moreover I am able to get the response from bank using classical scenario s in PI, but the response message is not getting pushed to ECC, rather its reaming in PI SXMB_MONI with status "Log version".
Thats the reason I am trying to do using ICO, but using ICO PI is not even sending the request out of PI to bank. Please see the below receiver communication channel message log.
Thanks,
Farhan

Hi,
As per the log, the message has started 23:18:02 and failed at 23.23:02 it took 5min time, if message is not process certain time this kind of errors comes up. Have you changed adapter type for existing SOAP communication channel or created new? provide complete log of the message from starting time to ending time if possible.

Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

In my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service. Can anyone please
help me.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

In my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service.
HI Arivazhagan K,
Could you give some explanation about what you modified? according the to error message, this is "resource is not found issue".
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

File to RFC Error com.sap.engine.interfaces.messaging.api.exception.Messagi

Hi ,
I am doing File to RFC Scenario.
My file get picked and I able to view the audit log under RWB message monitoring.
Here I am getting the error
u201CTransmitting the message to endpoint dest://XI_INTEGRATION_SERVER using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message using HTTPTransmitter. Reason: java.net.MalformedURLException: unknown protocol: dest.
Can any one tell me what is the reason.
Regards, Navneet

Hi Prakasu,
I am using PI 7.1 version .
When I opened SMICM there I am finding the HTTP Port as 52000.and the BS at SLD are also using the same Port in URL..
And when i verified with the Basis they confirmed that Exchange profile is set correctly.
But My file adapter is still not able to send the data to IS.
Than I configured a scenario file to file without IR object and in this case data is coming to IS and it is succesfull also.
what is the reason that in this case file adapter not able to push the data to IS.
I used File adapter with NFS protocol.
regards,
navneet

SOAP Sender Error - com.sap.engine.interfaces.messaging.api.exception

Hi,
I am testing a SOAP Sender Channel using a SOAP Client and getting the following error. I have read almost all the posts related to errors in SOAP Channel and also have checked my URL which is correct. AS mentioned in many of the posts, my url goes like
https://<host>:<port>/XISOAPAdapter/MessageServlet?channel=:DEMO:SOAP_s_GETLIST&version=3.0&SenderService=DEMO&interface=si_os_GETLIST&interfaceNamespace=<namespace>
This is the error that I get when sending a message to the interface
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>ADAPTER.JAVA_EXCEPTION</code>
<text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIProxy:PARSE_APPLICATION_DATA:
     at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1041)
     at sun.reflect.GeneratedMethodAccessor1044_10001.invoke(Unknown Source)*
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
Has Anybody got this problem before? Is it any problem with the SOAP Adapter itself or with the data that is going in the message? If so, What is the possible solution for this?
Thanks,
Rashmi.

Hi Rashmi,
I also think your problem is data related.
Check the response in your SAP PI message monitor (SXMB_MONI) when you trigger a request using SoapUI. It sometimes provides a bit more detail. You design (data types, message types, service interfaces etc.) was done in SAP PI 7 then an Abap Proxy was generated from the service interface?
Sometimes there is an issue between the XSD data type declaration in SAP PI and the conversion to Abap data types that takes place when a proxy is generated from a PI Service Interface.
Check the data that you pass in your request, especially those like datetime fields. Maybe even change some of the data type definitions (like datetime) to a string (request & response) & then test through SoapUI & see if you still get the error. Then you can work out how to best resolve it.
Best Regards, Trevor

Integrated Configurations com.sap.engine.interfaces.messaging.api.exception

Hi guys,
we are using PI 7.11.
With this release local processing on the advanced adapter engine is possible, when using integrated configurations.
This works fine.
Lately I faced an error situation in an RFC to JDBC scenario, when one field doesn´t meet the conditions of the database.
I tried to dig deeper to identify the incorrect value by switch on the trace in the receiver JDBC channel, as I did several times before.
Afterwards I treied to restart the message.
Following error occurs.
com.sap.engine.interfaces.messaging.api.exception.ConfigException: Unable to retrieve interface determination with object ID ab1bf720bf2711dea7d2020000000030 from CPA cache.
I made some test with integrated configurations (FTP to FTP) and come to the result that errors, which require changes on the communication channel e.g. wrong password etc. result in an new object in the CPA cache
trying restart the failed message ends up in the error specified aboce.
Anyone faced the same issue already?
Kind regards
Jochen

HI Jochen,
I feel that you should once go for a CPA Cache refresh from Adapter Engine and try executing your failed messages once again in the adapter engine.
To do a CPA Cache Refresh from the Adapter Engine:
To trigger a cache refresh from the individual Adapter Framework, open a browser window and enter the following URL:
http://<host>:<port>/CPACache/refresh?mode=delta|full
The Monitoring url is like this:
http://<host>:<port>/CPACache
Check this How-to Guide on Cache, it will be useful:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34&overridelayout=true
Thanks
Dhwani

Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all

Hello,
I have an issue configuring a simple File Adapter Content Conversion, it will be great to give me some support as I'am new in the PO Environment.
Iam reading a flat file and trying to write into an XML in the same FTP server
I have a 1 to 1 Mapping as follows
And my Content Conversion at Sender side Looks like this
After running the configuration Iam getting following error message
Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all
My System is the SAP Netweaver Process Intgration 7.4 single Java stack
Do you have any idea how to fix this issue?
Many thanks in advance
Khadim

Hi evrybody
I have enabled the tracing of ICO and have seen that my payload for the message mapping is ok,.
<ns:hartgeldbest_ERP_KT xmlns:ns="http://xxxxxx.de">
<Recordset>
<header>
     <gesellschaft>03</gesellschaft>
     <filiale>000</filiale>
     <satzart>11</satzart>
     <datum>00000000</datum>
     <kennzeichen>1</kennzeichen>
</header>
</Recordset>
</ns:hartgeldbest_ERP_KT>
The issue is on detrmining the RECEIVER in the Main-XML
<sap:Main xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3"versionMinor="1" SOAP:mustUnderstand="1">
<sap:MessageClass>ApplicationMessage</sap:MessageClass>
<sap:ProcessingMode>asynchronous</sap:ProcessingMode>
<sap:MessageId>ae41678e-da87-11e3-cd0f-0000006831a2</sap:MessageId>
<sap:TimeSent>2014-05-13T10:16:43Z</sap:TimeSent>
<sap:Sender>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty"/>
<sap:Service>CC_Hartgeldbest_File2Idoc</sap:Service>
</sap:Sender>
<sap:Receiver>
<sap:Party agency="" scheme=""/>
<sap:Service/>
</sap:Receiver>
<sap:Interface namespace="http://xxxxx.de">hartgeldbest_KT_async_out</sap:Interface>
</sap:Main>
Is it possible that the receiver is overwritten due to the Content Conversion? Because if I set my Message Protocol to "File" the receiver determination will work.
Any idea?
Thx
Khadim

Message Format Exception

Similar Messages

Maybe you are looking for