Message MOPZ_CHECK107 with RPM and cProjects

Hi all,
I'm using SAP Solution Manager 7.0 EHP1 SPS26. I want to upgrade our ERP EHP3 system to EHP5. I'm running a MOPZ session and I get following errors:
Successor installed for SAP XRPM 4.0.
Successor installed for SAP CPROJECT SUITE 4.00
In fact SAP cProject Suite 4.50 is installed here.
I already saw a similar problem in this forum (Error in maintenance optimizer), but it doesn't help me. I tried to apply recommendations of SAP note 1495419, without success.
Our ERP EHP3 system is currently defined in SMSY like this:
- SAP ERP 6.0, with SAP ECC Server marked as relevant and SAP cProject Suite marked as also installed;
- EHP3 FOR SAP ERP 6.0, with Central Applications marked as relevant;
- SAP CPROJECT SUITE 4.50, with cProject Suite with WFM Core marked as relevant;
- SAP RPM 4.5, with RPM Core marked as relevant.
Logical component Z_ERP (ERP 6.0) is in our solution.
I also tried to use the Landscape Verification Tool (transaction LVSM), then ran a new MOPZ, but without success.
Any suggestion is welcome.
Kind regards,
Christophe

Hi,
for the error - Successor installed for SAP CPROJECT SUITE 4.00
try this solution:
- Remove first SAP RPM, SAP CProjects Suite 4.50 and SAP Portf and Proj Mang 5.0 from the system.
- Now, add only CProjects Suite 4.50 and while adding, say "NO" when this window with respect to Product Assignment appears. Save the system.
- Now, add SAP Portf and Proj Mang 5.0 and save the system.
Run a new MOPZ transaction and it should work.
Regards,
Mohan.

Similar Messages

  • Integration with cfolders and cprojects

    Dear Experts,
    Provide me cookbook for integration of cfolders and cprojects through KM.OR can anyone guide me about how we can do ?
    Rewarded for the answer.
    Thanks

    Hi,
    WebDAV interface enables a connection to be set up between cProjects or cFolders and SAP KM in the Portal.
    Please find the below helpful links,
    http://help.sap.com/saphelp_ppm400/helpdata/en/1b/8688428b42c553e10000000a1550b0/frameset.htm
    https://forums.sdn.sap.com/message.jspa?messageID=7916774
    Regards,
    Vasu

  • How to display warning message box with yes and no buttons

    Hi,
    I am writing the code to delete emp details from database.
    I want to display warning message with yes and no buttons after clicking the delete button in the same page, if yes is clicked, i want to invoke delete() method in AM.
    Is it possible, if yes pls suggest me how to do it.
    Thanks
    Message was edited by:
    user536125

    This is being discussed in
    warning message(dialog page) to be displayed in the same page
    Thanks
    Tapash

  • Trying to use Message Signing with Webservices and getting exception!

    Here is the exception I'm getting....
    java.rmi.RemoteException: SOAP Fault:javax.xml.rpc.soap.SOAPFaultException: [Security:090377]Identity Assertion Failed, weblogic.security.spi.IdentityAssertionException: [Security:090245]No mapping for Identity User Name
    Detail:
    null; nested exception is:
         javax.xml.rpc.soap.SOAPFaultException: [Security:090377]Identity Assertion Failed, weblogic.security.spi.IdentityAssertionException: [Security:090245]No mapping for Identity User Name
    java.rmi.RemoteException: SOAP Fault:javax.xml.rpc.soap.SOAPFaultException: [Security:090377]Identity Assertion Failed, weblogic.security.spi.IdentityAssertionException: [Security:090245]No mapping for Identity User Name
    Detail:
    null; nested exception is:
         javax.xml.rpc.soap.SOAPFaultException: [Security:090377]Identity Assertion Failed, weblogic.security.spi.IdentityAssertionException: [Security:090245]No mapping for Identity User Name
    I followed step by step the example given on the Weblogic "edocs" pages, but I am at a loss as to what to put on the Identity Asserter Detail screen under "Default User Name Mapper Attribute Type" and "Default User Name Mapper Attribute Delimiter".
    I'm using the example code you can find at the following URL - http://e-docs.bea.com/wls/docs81/webserv/security.html#1061856
    I'm creating my client key pair as specified with a keyname of client_key and password of client_key_password.
    I'm also creating a user in the Admin Console called auth_user with a password of auth_user_password.
    HELP!!!!!

    The error message means you haven't configured the identity mapping between your client cert and a WLS user.
    Here is the WLST script I used in my dev2dev sample(https://codesamples.projects.dev2dev.bea.com/servlets/Scarab?id=S18)
    rlm = cmo.getSecurityConfiguration().getDefaultRealm()
    ia = rlm.lookupAuthenticationProvider("DefaultIdentityAsserter")
    activeTypesValue = array(["X.509"],java.lang.String)
    ia.setActiveTypes(activeTypesValue)
    ia.setDefaultUserNameMapperAttributeType('CN');
    ia.setUseDefaultUserNameMapper(Boolean('true'));
    So I add the X.509 to the ActiveTypes of IdentityAsserter, then I choose the "CN" as the DefaultUserNameMapperAttributeType, finally enable UseDefaultUserNameMapper.

  • PresaveAction() Popup message box with save and cancel button

    Hi,
    I want to give user an option from popup box with the message "Are you sure to Save you record".
    I got below javascript code but don't know how to show two buttons on popup if user wants to recheck before final saving then he should click CANCEL otherwise SAVE button.
    <script type="text/javascript">
    function PreSaveAction()
    alert("Your request has been submitted");
    return true;
    </script>
    Please advise in above code. 

    Hi,    
    For your requirement, you can use the JavaScript Confirm Box which will contains two buttons in a popup window.
    Here is a demo about checking the value in the “Title” field, if it equals “asdf”, then a Confirm box will come out, then user will be able to choose whether to save or not.
    <script type="text/javascript" src="http://code.jquery.com/jquery-1.10.2.min.js"></script>
    <script type="text/javascript">
    var $j = jQuery.noConflict();
    function PreSaveAction()
    var txtStatus = $j(":input[title='Title']").val();
    if(txtStatus == "asdf")
    alert("Invalid Input");
    var r=confirm("Are you sure to Save you record?");
    if (r==false)
    var statusfocus = $j(":input[title='Title']");
    statusfocus .focus();
    return false;
    else
    return true;
    </script>
    Feel free to reply if there still any questions about this.
    Best regards
    Patrick Liang
    TechNet Community Support

  • Upgraded from an iPhone 4s to a Galaxy s4 but iPhone users still message me with iMessage and the message to not end up delivering to me? HELP?!

    So i've just upgraded from an iPhone to a galaxy s4 but the messages keep being recieved as an imessage :S (when iphone users message me)

    Contact AppleCare so they can revoke your certificate

  • BW Reporting on RPM and C projects

    Hi Guys,
    I have a requirments on BW reporting on RPM and Cprojects.Can any one please suggest how we can do and documents
    on this would be helpfull
    Thanks
    Dp

    Hi,
    You can either take data from ABAP installation of cProjects, we created a realtime infocube and wrote programs to populate while saving data on portal.
    Check for corresponding table in source system first, that way you can save efforts on writing RFC.
    PS: explain more about RPM system and applications from both RPM and cProject.
    Hope it helps,
    Regards,
    Ashish

  • Project Manager in Xrpm and Cprojects

    Dear All,
    Could you please send the table name in RPM where i can see the Project manager information for the project.
    And if anybody having the relation between GUID in RPM and Cprojects, kindly share it. Many thanks in advance.
    BR,
    JB

    Resolved my self

  • Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go?

    Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE

    http://support.apple.com/kb/TS3281

  • I received the error (in iCal on my iMac): "The server responded with an error". The error message is very large, and if there is a way to acknowledge and close it I can't find it. Because this error message is open, I can't do anything in iCal. Any sugge

    I received the error (in iCal on my iMac): "The server responded with an error". The error message is very large, and if there is a way to acknowledge and close it I can't find it. Because this error message is open, I can't do anything in iCal. Any suggestions on how I could kill this error message? Thanks.
    iMac, Mac OS X (10.7.2)
    Basically i tried to enter too much information into my calendar and it has crashed  now i can not get rid of the error message or use the calendar  can anyone help please

    did you find ou how to get rid of it i can't

  • Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

    Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/

    Have you moved Pages from its installed location? Or just dragged a copy to your current system?
    It can't find some of its resources apparently.
    Peter

  • I'm trying to share to Media Browser a 20 minute still slide show with music and text. I have tried several times to save at 1080 HD, but just before it's finished, a message box pops up saying "File already open with write permission."  What's this mean?

    I'm trying to finalize/share to Media Browser a 20 minute still slide show with music and text. I'd like to finalize it 1080 hd and have tried several times, but just before it's finished, a message box pops up saying it can't be done because "File already open with with write permission."  What does this mean?  All files are closed; this iMovie project is the only thing open.  Does it mean one of the song files from iTunes? And should I just settle for saving it as a "large" file, which is what I'm trying right now?
    Thanks,
    Jamie

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occours only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    See also this post
    https://discussions.apple.com/thread/4434104?tstart=0
    Yours Bengt W

  • I am having all kinds of trouble with itunes and updating my ipad. when I open up itunes, it seems to just sit there, never going to itunes store. when I connect my ipad, I check update and it starts, but then I get this message:backup can't be saved on

    I am having all kinds of trouble with itunes and updating my ipad. I open itunes up but it doesn't do anything except open to a blank screen. I try to access the itunes store but it won't go there. When I connect my ipad, and try to update it, it starts and then I get a message that says backup cannot be saved on this computer. I have tried everything suggested to no avail. This is the 2nd or 3rd time I have had problems with itunes. Sometimes I even get a message that I am not connected to the internet.
    I have uninstalled and re-installed. Any help?

    You might not have enough space left on your hardrive.

  • I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone.

    I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone from this ipad. Everytime I try to send a message to a person that does not have an Apple product ( Iphone or Ipad ) it comes up saying contact is not registered for iMessage and wont send it. I can only send them a message from my iPhone 4 instead. Do I have to install a new App from the App store to send these non iMessage cell users a message?

    FYI
    Complete guide to using iOS 6
    http://howto.cnet.com/ios-6-complete-guide/
    Guide to Built-In Apps on iOS
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
    You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    http://www.youtube.com/watch?v=YT2bD0-OqBM
    http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
    http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • I have iPad 2 with wifi and no 3G. I want to use iMessage to talk to a friend in Russia from here in the UK. For some reason I can't send messages to her. Please try to make your answers basic and easy to follow as I'm not any good with technology :)

    Hi everyone!
    I'm wanting to use iMessage to talk to a friend in Russia. She has iPhone 4s and I have ipad2 wifi only. For some reason I can't send messages to her but I can to UK iPhones.
    Please could you make your answers easy to understand and in plain English I I'm not good with technology and I'm not up to date on the jargon :)
    Thanks in advance to anyone who can help!

    Hi everyone!
    I'm wanting to use iMessage to talk to a friend in Russia. She has iPhone 4s and I have ipad2 wifi only. For some reason I can't send messages to her but I can to UK iPhones.
    Please could you make your answers easy to understand and in plain English I I'm not good with technology and I'm not up to date on the jargon :)
    Thanks in advance to anyone who can help!

Maybe you are looking for

  • Approved podcast is not available after a week.

    I received the following e-mail from Apple stating that our podcast had been approved in the iTunes directory. Dear podcast owner, Your podcast, located at http://www.refactoredpodcast.com/?format=rss, has been approved. You should expect to see it o

  • Main Screen not Showing after deleting Applications.

    I accidently deleted some applications on my MBP. And now my mac cant load to the main screen, the color wheel keep spinning. And ideas to  rectify this problem?

  • Quicklook thumbnail generation without folded corner

    If you look at the thumbnail icon in List or Column view in Finder, a JPEG image is not shown with a folded corner. However when I write a quicklook plugin using the XCode 3 wizard, I get folded corners on the icons. Can anyone assist me in suppressi

  • Router with BRI interface

    i need your support to know model Router with BRI interface

  • Stop Images from being downloaded?

    I'm wondering if there is a way to stop your images from being downloaded off your website without using Flash. Is there another way? Thanks Zoe