Messages with zip files or multiple attachments are not being delivered

Has anyone else come across this? I've discovered that files sent from my .mac account are not being delivered if they contain zip files or multiple attachment. A single .docx file goes through, but multiple doc files or a single zip file do not.
I get no error message, and neither does the recipient. The message sends on my end but simply doesn't show up on their end.
Any thoughts on what might be causing this?

Another follow-up: Now, for whatever reason, even attachments of a single document aren't going through.
Again, I'm receiving no error message, and it shows up in my sent folder. It just never makes it to the recipient.
This is very frustrating, and makes my iCloud mail account all but useless. Does anyone have any idea at all what might be happening?

Similar Messages

My text messages are not being delivered

MY text messages are not being delivered. Keep coming back with the red saying "Not Delivered". Anyone know why this all of a sudden started happening and how to fix it?

Thank You Meg St._Clair contacted my carrier and fixed the problem on my iPhone 6 but still an issue on my iPad mini
Carrier could not fix the problem so said I would have to plug my iPad into my Mac and back it up and then restore factory settings
Havent done any of that yet!

My 4S has stopped ringing. Voicemail's disabled but if you call me, you'll hear it ring your end but it does nothing at mine and freezes if I make a call. Texts are not being delivered or coming through delayed. Ringer is on, tone enabled - help!

My iPhone 4S has stopped ringing altogether. Voicemail is disabled but if you call me, you'll hear it ringing at your end but it does nothing my end and freezes in the phone app if I make a call (doesn't ring or connect and doesn't freeze the phone, just the calling part). Texts are not being delivered or coming through delayed. Ringer is on, tone enabled - help!
I've disabled roaming so it only runs on wifi (this after getting a £4k phone bill...) and I can use Skype, Viber and WhatsApp with no problem at all.
Would really appreciate any help at all!
Many thanks.

Hi there - am with Orange and they said nothing wrong with account and service running normally. They said if they had cut me off I would've received a text (debatable with current message receiving situation!) and when I called out it would say 'calls from this number are barred'. Also if you called me it would say something similar. But it doesn't, it will ring and ring until it rings off but nothing happens at all on my handset. Not even a missed call notification. If I call out, it will display that it is calling the number but that's it. If I cancel the call it will constantly display 'ending call'. If I come out of the phone and go to another app then revist phone it will start calling that last dialled number - without ever getting as far as ringing or connecting.

My texts are not being delivered to iPhone operators as an iMessage, only to non iPhone operators?

My texts are not being delivered to iPhone operators as an iMessage, only to non iPhone operators?

Check that iMessage is turned on in Settings > Messages and that the Apple ID in Settings > Messages > Send & Receive is correct, along with your phone number and email account(s).

Pictures are not being delivered after saying delivered on iMessage.

Pictures are not being delivered after saying delivered on iMessage.
Txting through iMessage works fine. Pic's won't send.
I turned on and off everything and did all the necessary trouble shooting.
I'm on a Verizon 4S. and I'm sure Verizon has nothing to do with iMessage system, since it's on its on server.

bump

All of a sudden my emails are not being delivered to my ...

all of a sudden my emails are not being delivered to my cell phone

Hi there!
There is an outage for some BIS users...see this article:
http://www.dataoutagenews.com/2009/09/22/bis-down-in-north-america-again/
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Task Scheduling Script - Need help with passing the scheduled command (variables are not being evaluated)

Hi Everyone,
I'm trying to get a simple task scheduler script to work for me and can't get the command I need passed to the scheduler to evaluate properly.
Here's the script:
###Create a new task running $Command and execute it Daily at 6am.
$TaskName = Read-Host 'What would you like this job to be named?'
$Proto = Read-Host 'What is the protocol? (FTP/FTPS/SFTP)'
$User = Read-Host 'What is the user name?'
$Pwd = Read-Host 'What is the password?'
$Server = Read-Host 'What is the server address?'
$NetworkDir = Read-Host 'Please input the network location of the file(s) you wish to send. Refer to documentation for more details.'
$RemoteDir = Read-Host 'Please input the REMOTE directory to which you will upload your files. If there is none please input a slash'
$Command = 'winscp.com /command "option batch abort" "option confirm off" "open $Proto://$User:$Pwd@$Server" "put $NetworkDir $RemoteDir" "exit"'
$TaskAction = New-ScheduledTaskAction -Execute "$Command"
$TaskTrigger = New-ScheduledTaskTrigger -Daily -At 6am
Register-ScheduledTask -Action $TaskAction -Trigger $Tasktrigger -TaskName "$TaskName" -User "Administrator" -RunLevel Highest
Write-Host "$TaskName created to run Daily at $TaskStartTime"
What's messing up is the $Command creation, the command needs to have the quotes around "option blah blah", but if I wrap the whole line in single quotes the variables that are evaluated for the "open blah blah" strings (which also need
to be inside quotes) and the "put blah blah" string are not being evaluated properly.
I've dorked about with different bracketing and quoting but can't nail the syntax down, could someone point me in the right direction? My Google-fu seems to be lacking when it comes to nailing down this issue.
Thanks

Hmmn, closer. I'm getting this error now:
+ $Command = $tmpl -f $User, $Pwd, $Server, $NetworkDir, $RemoteDir
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (winscp.com /com...t {4} {5}" exit:String) [], RuntimeException
+ FullyQualifiedErrorId : FormatError
And the command being added to the new task looks like this:
winscp.com /command "option batch abort" "option confirm off" "open ($Proto)://($User):($Pwd)@($Server)" "put $NetworkDir $RemoteDir" "exit"
Here's the current state of the script. I get what you're doing to try to bypass the quotes issue, using an array. I'm just not awesome at this yet sooooooo...
$TaskName = Read-Host 'What would you like this job to be named?'
$Proto = Read-Host 'What is the protocol? (FTP/FTPS/SFTP)'
$User = Read-Host 'What is the user name?'
$Pwd = Read-Host 'What is the password?'
$Server = Read-Host 'What is the server address?'
$NetworkDir = Read-Host 'Please input the network location of the file(s) you wish to send. Refer to documentation for more details.'
$RemoteDir = Read-Host 'Please input the REMOTE directory to which you will upload your files. If there is none please input a slash'
$tmpl = 'winscp.com /command "option batch abort" "option confirm off" "open {0}://{1}:{2}@{3}" "put {4} {5}" exit'
$Command = $tmpl -f $User, $Pwd, $Server, $NetworkDir, $RemoteDir
$TaskAction = New-ScheduledTaskAction -Execute $Command
$TaskTrigger = New-ScheduledTaskTrigger -Daily -At 6am
Register-ScheduledTask -Action $TaskAction -Trigger $Tasktrigger -TaskName "$TaskName" -User "Administrator" -RunLevel Highest
Write-Host "$TaskName created to run Daily at $TaskStartTime"

TS2755 For some reason when you try to attach mutiple photos to a text message directly from te camera roll they are not being send

As well other app where you want to send to a message iMessage or text
What you send doesn't get sent
I've verified with mutiple users and they are not receiving my messages with photos attached

A brief and probably non-helpful answer: I know of no way to eliminate your large amount of duplicates other than by repetitive, tedious manual effort.
*There has got to be a simpler way.*
I hope you're right, but I don't think there is a simpler way.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
Yes, really

IMessage saying messages are not being delivered... but they are...

This past week I have been sending out texts on imessage, but about 80% of them are coming back saying they aren't being delivered. But everyone seems to be getting them and responding. They also have said the same thing happens to them. I thought it might be a wifi issue and that I'm going through a work wifi, but it happens even when I'm on LTE. Any ideas as to why this is happening?

I've been having the same issue for the past couple of days too. It first says "Delivered" then changes to "Not Delivered", even though (at least most of the time) the messages seem to be going through. Only started happening to me on the weekend. Doesn't seem to make a difference if I'm using wifi or the 3G network. iMessage is only enabled on my iPhone. I've tried switching iMessage off and then on again as per some suggestions. Nothing seems to help.

Text messages are not being delivered from iPhone 4s

Why aren't my messages being delivered from my iPhone 4S?

Thank You Meg St._Clair contacted my carrier and fixed the problem on my iPhone 6 but still an issue on my iPad mini
Carrier could not fix the problem so said I would have to plug my iPad into my Mac and back it up and then restore factory settings
Havent done any of that yet!

Error message to be thrown when multiple enteries are not entered

Hello Guys,
I have used a select-options with no intervals in the selection screen.
If the user enters one value in the range, its working.
But I want a error message to be thrown when only one entry is entered. User should enter more than one entry always.
I used low and high but its not working.
Kindly guide me.

No intervals only works on the main screen. If the press the right arrow and go to the ADDL choices, they can choose the entire database table in a single range....Your test is, therefore, too simplistic. If you want to limit this on both the main and the additional choices screens, you have to implement Function Module SELECT_OPTIONS_RESTRICT in the Load-of-Program or Initialization event.
Why not select from a table into a work table where the values are IN the select-options and see how many the user obtained?
Something like this:
Select <your field> from <your table> into table <your internal table>
where <your field> IN <your select-options>.
if lines( <your internal table> ) lt 2.
<your error message>.
endif.

Emails from websites are not being delivered

If I send an email from another personal account to my mac/icloud email address, it is delivered. And I am still getting some unsolicited emails from vendor websites. But if I am on a website (for example a utility company site) and it says it will send an email to me (for example to reset a password, or to confirm an online purchase) I am not receiving those emails. This has been the case for a few weeks now but for a while I thought I was just missing the emails as I get a lot usually on my mac/icloud account. But I now realize there is a problem, since I only "apparently" received one email in total yesterday! Typically I get more like 30.
Apple Support want a serial number to even log my problem - I don't have a serial number as this is not a hardware issue!
Thanks for your help.

please contact your mail provider about this deficiency in their SMTP servers error reporting. As the error originates with your mail provider, Thunderbird is only the messenger and can offer no more than it is given!

Imessages are not being delivered frequently. Normal sms works fine.

When i send an imessage an error is being displayed "not delivered", but normal messages works fine.

bump

Messages in queue not being delivered

Hi
I am using IMS 5.2. After a recent migration of user accounts to an new login ID, some user's emails are not being delivered to thier accounts and are accumulating in the ims-ms queue. When I did the migration, I copied the user's email to thier new account. I did reconstruct -f -r a couple of times, and emails appeared to be delivered to the new login accounts.
There were a few emails left in the queue but now there are close to 6000 and users are not getting emails delivered. When I look at the message in the queue, they state the user is overquota. I checked the user's account and they are not overquota.
Any suggestions on how to correct the problem or get the message to be delivered?
Thanks
Randy

Jay,
iPlanet Messaging Server 5.2 (built Feb 21 2002)
libimta.so 5.2 (built 15:07:23, Feb 21 2002)
SunOS cpmail 5.8 Generic_108528-27 sun4u sparc
SUNW,Ultra-60
This is the original release. There have been over thirty patch/hotfix releases, and hundreds of fixes. I URGE you to go to Sun's download site, and get 5.2p2, and install it immediately.Thanks for the advice Jay. The product is installed as part of the portal we are using(which I upgraded last June). I was unaware of the versioning and patches that are associated with the version of IMS that was installed. I will move forward with confirming with our portal vendor that the latest sp and patches will support the integrated IMS.
>>
>>
How did you "migrate" your users to new login id?When you "copied" the files, did you re-set
ownership/permisions of the files?
I used the following process in a script to migrate
the users from old login to new login:
1. created the new login mailbox with mboxutil -c
2. moved new mailbox to different partitions
There is a utility/command that does all of this for you.
mboxutil -r
When you "moved" the mailbox, I assume you use unix cp, right? Bad Idea.
current versions of mboxutil do this all for you, and don't need reconstruct afterwards.
I suspect that you have either not properly "moved" your user in LDAP, folder database, or have gotten file ownership or permissions wrong after the move.
Unix files are owned by a user and group, and have various read/write permissions set by the OS. YOu're on a Unix system, so you should know about such.I tried using the mboxutil -r initially but was getting a lot of errors with it in my test environment. In hindsight, I am thinking this had to do with the version of IMS I have installed. The unix file move was done with the IMS admin so would also own all the the messages etc on the OS side. I have obviously made a mess of things! So again, I will put in a support call to our portal vendor about how to proceed on this. I really appreciate your input into this.
3. retrieved hashed directory information for old and
new mailbox for user
4. copied files from old to new mailbox with cp -R
oldmailbox/* newmailbox/
5. after all users were migrated, I did a reconstruct
-f -r, and a reconstruct -f -m
I am not sure what you mean by re-set
ownership/permissions.
Have you looked at the "default" log for an errormessage?
I found the following errors in the default log:
default.60.1093908097:[31/Aug/2004:04:15:01 -0600]
cpmail stored[28697]: Store Critical: Error checking
mailbox database: Ignoring log file:
/usr/iplanet/ims52/msg-cpmail/store/mboxlist/log.00000
00543: magic number 0, not 40988
default.62.1094084554:[02/Sep/2004:04:15:02 -0600]
cpmail stored[20883]: Store Critical: Error checking
mailbox database: Ignoring log file:
/usr/iplanet/ims52/msg-cpmail/store/mboxlist/log.00000
00543: magic number 0, not 40988
Your reconstruct command may have been wrong, too. That's what the errors are telling you.
Also, there are other problems in your system. Permission problems, most likely.
I would do a reconstruct -m, first. and see if the above goes away.I will proceed with what you suggested, and let you know the results. Again, thank you very much for your time and input for this.
>>
>>
AS well, when I do a mboxutil -u on an affected user,
the quota information says the user is well under
quota. For example:
$ mboxutil -u xxxxxxxxx
diskquota size(K) %use msgquota msgs %use user
25600 2604 10% no quota 19
19 xxxxxxxxxxx
The error message doesn't really have anything todo with quota.>>
>>
In imta/queue/ims-ms, the user has 183 messages
waiting to be delivered. All of the messages say the
user is over quota.
Any suggestions?
Randy, you need to re-think how you're moving users. You have somewhat messed up your mailstore. . . I will in re-think things. In fact, I have a number of users to migrate. I will stop what I am doing and get this right before I proceed! There is no sense compounding the problem when there is a better alternative. One thing for sure, I will continue using this forum before I proceed with messing with a production system!
You may need to contact tech support for the immediate help you will need to straighten this all out.>>
>>
RandyThanks Jay.
Randy

How can I install attachments for SAP notes with zip-files ???

How can I install attachments for SAP notes with zip-files ???

Can you elaborate on your question? How exactly is your question related to SAP NetWeaver Portal: Application Integration? If you are really asking how to install attachments contained in SAP notes, there is no automatic/general way and you should ask your question in the Software Support and Maintenance space to begin with. What SAP note(s) are you looking at installing?

Messages with zip files or multiple attachments are not being delivered

Similar Messages

Maybe you are looking for