method tag

Your documentation says the method tag must follow the following signature:
public static EventResult myEventHandler(BajaContext context,Page page,PageEvent event)throws Throwable;
The following syntax is also valid for the method tag:
public static DataObject someMethod(
RenderingContext renderingContext,
String namespace,
String name);
Where can I find documentation on the correct usage of this method.
Tks
Booker Northington II

Just to clarify... UIX actually defines two <method> elements, one in the UIX Components namespace and another in the UIX Controller namespace. <ui:method> is used to define a method-based data provider as described in the "Data Binding" chapter of the Developer's Guide. <ctrl:method> is used to define a method-based event handler as described in the "Introducing the UIX Controller" chapter of the dev guide.

Similar Messages

Resource registration is failing - Couldnt run method tag. Error in execve

Hi,
We have solaris cluster setup with two nodes and a resource group exists which contains a zfs resource which could be mounted on to one of the nodes in the cluster.
Our application is installed on one of the directory in the zfs file system. The file system and the application would be to be on one of the nodes and if somethings goes bad, it shoud failover to other node.
I used Agent Builder to create new resource type for managing our application part of sun cluster and used the ksh mode providing it start/stop/probe scripts. I have left validate script as blank.
When I try to register this new resource type, (resource time generated folder/util/start* script,
nodex /u2/appx/cluster/ResourceType_01/XYZSolarisAPPXClusterL0/util % ls -ltr
total 71
-rw-r--r-- 1 appowner appowner 13960 Jan 12 07:36 startSolarisAPPXClusterL0 <---
-rw-r--r-- 1 appowner appowner 8281 Jan 12 07:36 removeSolarisAPPXClusterL0
-rw-r--r-- 1 appowner appowner 7316 Jan 12 07:36 stopSolarisAPPXClusterL0
-rw-r--r-- 1 appowner appowner 2300 Jan 12 07:36 SolarisAPPXClusterL0_config
# Resource group creation was successful (SolarisAPPXClusterL0-harg)
# Virtual Host resource creation was successfull
# It got added to the new group created
# But it is failing when it is attempting to create resource for the new resource type - SolarisAPPXClusterL0-hars
Error:
Jan 17 14:52:01 nodex Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <SolarisAPPXClusterL0_validate.ksh> for resource <SolarisAPPXClusterL0-hars>, resourcegroup <SolarisAPPXClusterL0-harg>, node <nodex>, timeout <300> seconds
Jan 17 14:52:01 nodex Cluster.RGM.fed: [ID 838032 daemon.error] SolarisAPPXClusterL0-harg.SolarisAPPXClusterL0-hars.2: Couldn't run method tag. Error in execve: No such file ordirectory.
Jan 17 14:52:01 nodex Cluster.RGM.global.rgmd: [ID 699104 daemon.error] VALIDATE failed on resource <SolarisAPPXClusterL0-hars>, resource group <SolarisAPPXClusterL0-harg>, time used: 0% of timeout <300, seconds>
The new resource type files are available on nodex and nodey. When we try to remove and start it again, the error occurred on the other nodey with similar error.
Jan 17 14:33:52 nodey Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <hafoip_validate> for resource <failover-clus1>, resource group <SolarisAPPXClusterL0-harg>, node <nodey>, timeout <300> seconds
Jan 17 14:33:52 nodey Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <hafoip_validate> completed successfully for resource <failover-clus1>, resource group <SolarisAPPXClusterL0-harg>, node <nodey>, time used: 0% of timeout <300 seconds>
Jan 17 14:33:53 nodey Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <SolarisAPPXClusterL0_validate.ksh> for resource <SolarisAPPXClusterL0-hars>, resourcegroup <SolarisAPPXClusterL0-harg>, node <nodey>, timeout <300> seconds
Jan 17 14:33:53 nodey Cluster.RGM.fed: [ID 838032 daemon.error] SolarisAPPXClusterL0-harg.SolarisAPPXClusterL0-hars.2: Couldn't run method tag. Error in execve: No such file ordirectory.
Jan 17 14:33:53 nodey Cluster.RGM.global.rgmd: [ID 699104 daemon.error] VALIDATE failed on resource <SolarisAPPXClusterL0-hars>, resource group <SolarisAPPXClusterL0-harg>, time used: 0% of timeout <300, seconds>
Are there other logs than /var/adm/messages to check for errors ?
What is causing this error ? Any help is appreciated.
Thanks in advance!

See if adding the execute permissions to the scripts solve the problem.
In general, I just use the SUNW.gds resource type directly rather than use the agent builder. If you want to build something a little more complex, then I would recommend sub-classing the SUNW.gds agent. There are a number of Oracle supplied agents that do this, for example, the HA-LDoms, and HA-obiee agents. Have a look at how they work.
Regards,
Tim
---

Problem with the method in JSP

<%@ method = "doPost" %> ******* if i remove this statement i am getting output but what is wrong with this statement ********
<HTML>
<HEAD><TITLE>Hello</TITLE></HEAD>
<BODY>
<H1>
<% if (request.getParameter("name") == null) { %>
Hello World
<% } else { %>
Hello, <%= request.getParameter("name") %>
<% } %>
</H1>
</BODY></HTML>
(thank you for the last posted problem solving)

There is no <%@ method %> tag for a JSP.
http://java.sun.com/products/jsp/syntax/1.2/syntaxref12.html
It looks like you are trying to write a JSP that only accepts post requests - not get?
I'm not sure if you can accomplish that in a JSP directly.
You can with an HttpServlet (which is where the doGet/doPost methods are defined) but HttpJspPage doesn't extend that class necessarily.
Best you could probably do is put in a test of request.getMethod() to see if it is get/post.

Create XML element without closing tag using Visual C++

I know how to create xml element with closing tag (using WriteStartElement and WriteEndElement methods)
<tag id="1234">
</tag>
but is there a way in Visual C++ to produce xml element like this
<tag id="1234"/>
i.e. without closing tag?

Hi adamay,
Please refer to this thread.
http://stackoverflow.com/questions/8182245/create-xml-element-without-closing-tag-using-xslt
I think you could try the way of write your own class derived from XmlWriter.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Passing parameters within the ctrl:method/

I am using the method tag of the controller namespace. Dose it have a child which will allow you to page/pageEvent parameters?
<ctrl:method class="SomeClass" method="someMethod">
<..../>
</ctrl:method>
If this is possible, where can I review the documentation on it?
Tks
Booker Northington II

What exactly are you trying to do?
Did you check out the UIX Element Reference for UIX Controller elements? Did you read the UIX Controller chapter?
Here is some doc on the <pageURL> that I told you about:
The<pageURL> element defines a declarative binding for building up a UIX Controller URL. It supports setting each part of the URL, and can data-bind virtually all the pieces individually. A single pageURL element can set any or all of the following pieces:
Page name: can be data bound
A list of Page property key/value pairs: the values can be individually data bound
Event name: can be data bound
Event parameter key/value pairs: the values can be individually data bound
Anchor name: can be data bound
"statePreserved": whether to copy the State object from the current page into the target URL. This defaults to true.
The only pieces that cannot be databound are the keys used for the page properties and event parameters and the "statePreserved" and "propertiesPreserved" attributes. While the keys cannot be databound, a null value will omit a key.
Thanks,
Jeanne

CMP and Finder methods

I've got a table:
id number primary key,
name varchar2(50),
price number
How can i make finderXXX for this sql query:
select * from table where name like 'beer' and price > 10;
Thank's

gday Max -
For this, you'll need to make some a slight modification to the generated finder methods.
Say you create an entity called Drinks which has the same structure as the table you provide as an example (and can I just say, what a great example you chose ;)
It should go something like this - note, I've not tried this but this is what you need to look at doing:
In the Home interface (DrinksHome) create a findermethod that looks like:
public Collection findByName(String name, Double Price) throws RemoteException, FinderException;
* note we make the return type a collection since it's possible that you may get more than one entity returned.
Go ahead and deploy your EJB.
When you deploy your EJB, OC4J will generate a finder method for this method for you.
Now what you need to do is to modify the generated XML deployment descriptor to tune the query if you will.
OC4J generates the deployment descriptor info it needs for an application in $OC4J/application-deployments.
Go to to $OC4J/application-deployments/<app-name>/<ejb-name> where app-name and ejb-name are specific your deployed EJB.
Open the orion-ejb-jar.xml file. This is the file OC4J uses to describe the deployed beans.
Search through the file until you find the <finder-method> tag.
Amend the query attribute of the finder-method tag to reflect the where clause of the query you want to execute:
query="$name = $1 AND $price > $2"
Now go to the generated SQL string and add the corresponding SQL where condition, using a ? in place of the actual value of the query string above
It would become something like ...
< !-- Generated SQL: "select drinks.id, drinks.name, drinks.price from drinks where drinks.name = ? AND drinks.price > ?" -->
Note that in this query, the where clause matches the query you specified, but you omit the actual values.
Check the method-params defined for the find below and ensure that the order of them lines up with the values you've specified in the finder query.
Stop OC4J and restart it and the new finderMethod should come into effect.
Give that a try and see how you go.
cheers!
-steve-
null

Problem with search method in AM called from JSP

Hi, im trying to get the real value from an foreign key of a view, and i have been created a custom search method in the AM, but i got a problem, the search only get results the first time that is called, the next times gets null result :
public String getValorReal(Long identificador, String vista,
String campoFiltro, String campoValor)
where identificador is the foreign key, vista is the name of the view that contains the real value of the foreign key, campoFiltro is the field name of the view that will match the foreign key, and campoValor is the field name of the view that the search method will return as the real value.
I created this class that call the search method :
public class CuentasContablesOrgLOV {
private BindingContainer bindings;
public Map CuentaContable= new HashMap(){
public Object get(Object key){
Map parametros;
BindingContainer bindings = getBindings();
String result = null;
OperationBinding operationBinding = bindings.
getOperationBinding("getValorReal");
if (operationBinding != null){
parametros = operationBinding.getParamsMap();
parametros.put("identificador",new Long(key.toString()));
parametros.put("vista","CcCuentasContablesView4");
parametros.put("campoFiltro","identificador");
parametros.put("campoValor","CuentaContable");
result = (String)operationBinding.execute();
return result;
public Map getCuentaContable() {
return CuentaContable;
I invoke this class from the JSP with EL:
<af:outputText value='#{CuentasContablesOrgLOV.cuentaContable[row.CcCucoIdentificador]}'/>
In the AM method obtains all the parameters correct, but the search only works the first time!
Do you have an idea whats been happened?
thanks a lot for your help

There is no <%@ method %> tag for a JSP.
http://java.sun.com/products/jsp/syntax/1.2/syntaxref12.html
It looks like you are trying to write a JSP that only accepts post requests - not get?
I'm not sure if you can accomplish that in a JSP directly.
You can with an HttpServlet (which is where the doGet/doPost methods are defined) but HttpJspPage doesn't extend that class necessarily.
Best you could probably do is put in a test of request.getMethod() to see if it is get/post.

Calling a C++ method from JAVA

Hello together,
I have the following problem. I have to decryp a password in JAVA using a C++ method. I have a dll and the headerfile. It is impossible to change anything at the C++ source. The method is:
long encrypt(
unsigned char * puchClearText,
unsigned char * puchKey,
unsigned char * puchCipherText);
How do I have to call it from JAVA. Is it possible?
Thank you very much for help.
Martin

You need to create a JNI wrapper DLL that will serve as the bridge between the java application and the third party DLL.
The java methods tagged as "native" will call the JNI wrapper DLL functions, which in turn will call the third party DLL functions.
To get acquainted with JNI, you should start by looking at [url http://java.sun.com/developer/onlineTraining/Programming/JDCBook/jni.html]JNI Technology.
While coding, allways have at hand the [url http://java.sun.com/j2se/1.5.0/docs/guide/jni/spec/jniTOC.html]JNI Specification.
Regards

Creating javadoc tags

Hi all,
I need to create a new javadoc tag. (I'm using Javadoc 1.3)
Do you guys know of any good tutorial? I tried Sun's javadoc tool documentation, but it doesn't show a clear example of how to create a new tag, instead, it just tells us to modify the standard doclet, but doesn't say where.
Gustavo Eulalio
[email protected]

You need to make the chages to HtmlStandardWriter and MethodSubWriter. You will probable also need to add an entry to the properties file. Here is the code for a new '@xml' tag I added. I also added a '@mapping' and '@refs' tag.
//from HtmlStandardWriter
    public void printXmlTags(Doc doc) {
        Tag[] mappings = doc.tags("xml");
        if (mappings.length > 0) {
            dt();
            boldText("doclet.Xml");
            //bold("Mapping:");
            dd();
            printCommentTags(mappings,false,false);
            ddEnd();
//from MethodSubWriter
    protected void printTags(ProgramElementDoc member) {
        MethodDoc method = (MethodDoc)member;
        ParamTag[] params = method.paramTags();
        Tag[] returns = method.tags("return");
        Tag[] sinces = method.tags("since");
        Tag[] mappings = method.tags("mapping");
        Tag[] refs = method.tags("refs");
        Tag[] xmls = method.tags("xml");
        ThrowsTag[] thrown = method.throwsTags();
        SeeTag[] sees = method.seeTags();
        ClassDoc[] intfacs = member.containingClass().interfaces();
        ClassDoc overridden = method.overriddenClass();
        if (intfacs.length > 0 || overridden != null) {
            printTagsInfoHeader();
            printImplementsInfo(method);
            printOverridden(overridden, method);
            printTagsInfoFooter();
        if (params.length + returns.length + thrown.length + sinces.length
             + sees.length + mappings.length + refs.length + xmls.length> 0) {
            printTagsInfoHeader();
            writer.printRefTags(method);
            writer.printMappingTags(method);
            printParamTags(params);
            writer.printXmlTags(method);
            printReturnTag(returns);
            printThrowsTags(thrown);
            writer.printSinceTag(method);
            writer.printSeeTags(method);
            printTagsInfoFooter();
        } else {   // no tags are specified
            MethodDoc taggedMeth = new TaggedMethodFinder().
                                      search(method.containingClass(), method);
            if (taggedMeth != null) {
                printTagsFromTaggedMethod(taggedMeth);

Project Management Wishlist (hoping for software or online solutions)

hi all.
i've converted the office to mac over the last two plus years and need to put a second level of organization to bed.
would anyone mind helping me find other websites and/or suggestions on how to get this finalized? apologies for the length and intricacy of the post but THANKS for any help on this! even just one good lead or recommendation (say for FileMaker or one of the Devon tools could help me get moving forward with it and not have to backtrack).
i work on PROJECTS that seem to need various kinds of data. some notetaking, imagery, url's. pages documents, pages documents printed to pdf, some pdfs that others created, spreadsheets, various creative files such as CAD, photoshop, indesign etecetera - and of course email and text and phone conversations. i would really ideally love to pull all this together but of course i know this is not realistic.
i also really need to communicate some of this information with clients and have them communicate back to me, right now this is a terrible mess and extremely unproductive with widely dispersed and duplicated information (at a bare minimum).
i have finally customized my images in Aperture but still need to organize my pdf's and my videos. i also find Spotlight to be rather unhelpful for some items and in reading up on Devon, one of their tools has a /graphic/ search display that somehow shows linked items and whether they have been "read" or not. this kind of VISUAL ORGANIZATION would be absolutely fantastic [http://www.devontechnologies.com/products/devonagent/overview.html]. i should also add that what i /don't/ want to do is to have to catalog my project file by file and simply DRAGGING and DROPPING files to create a link if my ideal organizational method. tagging items with the GTD tools that i have tested is a non-starter for me and i actually don't even use tags in my Aperture database. i just drag and drop them to an appropriate Project.
currently an example workflow for my Aperture database is that i POST these images to flickr to let a client see what kind of imagery i am using in their project (but they cannot upload /their/ imagery). nevertheless, this is very convenient because i can simply create an ALBUM in Aperture and drop the (pre-organized) imagery in there and post it to flickr from within the Aperture UI. this is really great but getting this link to a client is a bit of a pain because even flickr Pro uses some silly thing where you have to decide whether the recipient is a "friend" or "family" and ostensibly anyone that gets determined as one or the other can see all the other images in this category. it would be a whole lot better if i could just create an Album for a particular client. of course it would be great to
in any event -
in an ideal world (off the top of my head i would like) the ability to create a "Project" in my computer which organizes the following and /also/ allows me to post this to a place where Clients can have a LOGIN and PASSWORD that allows them to both view and UPLOAD information.
1. bookmarks
2. pdfs
3. spreadsheets
4. contact list
5. images
6. other files
7. a lot that i am forgetting to include here.
it would also be great to be able to organize PHONE CALLS and TEXTS and EMAILS on my computer so that i can have a record of communication with and FOR this client.
i would also like to get most or much of this to my iPhone if at all possible!
Devon for project organization and possibly other needs [http://www.devontechnologies.com]
FileMaker for project organization [http://www.filemaker.com]
Campfire for project management [http://campfirenow.com]
Papers for academic research [http://www.papersapp.com/papers/]
Highrise for contact and prospect management [http://highrisehq.com]
Project Wizard for critical path management [http://www.projectwizards.net/en/merlin/]
Diigo for online bookmarking [https://www.diigo.com]
what i use now:
Notational Velocity (oh so awesome) iphone compatible [http://notational.net]
Reminders (nice for the location tools but i have not maxed out my use of this tool)
Contacts (for personal contacts and syncs usually well with my laptop and desktop and iphone. however, managing email addresses in here is a nightmare for a small business)
Cardscan (for business card contacts. resides currently only on the Mac Pro and i am not sure how to get Cardscan to talk to my other devices)
Mac Mail (meh)
Sparrow (cool and quick but somewhat feature light)
iPhone (yes-sir-eee bob)
Safari (good at what it does)
1Password (dig the syning across devices)
Transmit (nice FTP tool)
i also work on windows where i do quickbooks and CAD so i am open to software suggestions for windows if there is nothing for the mac (though i suspect i can do much of the above on the mac, even if i cannot corral all of it together).
THANKS FOR READING and thanks for any constructive input!

Ipolucci,
I am a teacher and so I do not have your needs to really understand your requests.
That said, I would reccomend you FileMaker Pro and Journler ( currently at version 1.1.62, running by Mac OS X 10.3.9 , the version I have and already in versio 2.0.1 for those who have 10.4).
The first one is a relational commercial DB of an Apple subsidiary, with several template solutions ( probably one will fill your needs ) and the second one is a freeware, that has integration with Mail, Adress Book, Blogs, Photos, Audio recordings, iTunes and more.
Just in case does not come anyone else with the complete solution, you should consider a free trial of FileMaker Pro (just released the version 8.5) and take a look at Journler.
Both at <http://www.apple.com/downloads/macosx/>
Regards,
Jorge Lucas (the guy from Rio Grande do Sul)

MyFaces not rendering, ADF faces IS rendering

I'm installing my app on the websphere application server, Version 6.1 After having issues of both adf and myfaces not working, I came accross this link which helped me somewhat. http://wiki.apache.org/myfaces/Websphere_Installation .
By "not working" I mean that my jsp would have <h:commandLink>'s and <af:commandButton/> however the html was never actually generated. (You could view the pages source and the resulting html page was blank).
After following those instructions, ADF components are correctly rendered, and the html works. However, I can not use any <h:> or <h:> components.
Keep in mind, every single part of this used to work while using Tomcat (I think it was 5.5, not 6).
faces-config-app.xml (our replacement for faces-config).
<?xml version="1.0"?>
<!DOCTYPE faces-config PUBLIC "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
"http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
<faces-config>
     
     <application>
          
          <variable-resolver>org.springframework.web.jsf.DelegatingVariableResolver</variable-resolver>
          
          <locale-config>
               <default-locale>en</default-locale>
               <supported-locale>en</supported-locale>
          </locale-config>
          
          <message-bundle>messages</message-bundle>
          
          <default-render-kit-id>oracle.adf.core</default-render-kit-id>
     </application>
     <lifecycle>
          <phase-listener id="responseHeaderController">com.unyric.cias.cm.web.util.HttpResponseHeaderController</phase-listener>
     </lifecycle>
</faces-config>web.xml (Yes there is a lot of extra things in there such as application context params, but I wanted to paste the whole thing. Please bear with me).
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
     <display-name>CIAS Case Management Web</display-name>
     <context-param>
          <description>JSF state setting: Keep state of views on client</description>
         <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
         <param-value>client</param-value>
     </context-param>
     <context-param>
          <description>JSF configuration files</description>
         <param-name>javax.faces.CONFIG_FILES</param-name>
         
         <param-value>/WEB-INF/faces-config-app.xml,/WEB-INF/faces-config-nav.xml,/WEB-INF/faces-config-beans.xml</param-value>
     </context-param>
     <context-param>
          <description>Spring configuration files</description>
          <param-name>contextConfigLocation</param-name>
          
          <param-value>/WEB-INF/presentationContext.xml classpath*:spring/applicationContext.xml classpath*:spring/validationContext.xml classpath*:spring/securityContext.xml classpath*:spring/hibernate.cfg.xml</param-value>
     </context-param>
     <context-param>
          <description>Validates JSF configuration files on startup</description>
         <param-name>org.apache.myfaces.validate</param-name>
         <param-value>true</param-value>
        </context-param>
     <context-param>
          <description>Timmer Setting for Case Queue screen</description>
             <param-name>pollingTimer</param-name>
             
             <param-value>60000</param-value>
     </context-param>
     <context-param>
          <description>Maximum number of rows shown in tables.</description>
             <param-name>tableRowsPerPage</param-name>
             <param-value>25</param-value>
     </context-param>
     <servlet>
          <description>JSF controller</description>
             <servlet-name>FacesServlet</servlet-name>
             <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
             <load-on-startup>1</load-on-startup>
     </servlet>
     
     <servlet-mapping>
           <servlet-name>FacesServlet</servlet-name>
          <url-pattern>*.do</url-pattern>
     </servlet-mapping>
     <servlet>
          <description>Serves up ADF Faces resources</description>
            <servlet-name>AdfResourceServlet</servlet-name>
          <servlet-class>oracle.adf.view.faces.webapp.ResourceServlet</servlet-class>
     </servlet>
     <servlet-mapping>
         <servlet-name>AdfResourceServlet</servlet-name>
         <url-pattern>/adf/*</url-pattern>
     </servlet-mapping>
     <listener>
          <description>Initializes Spring on application startup.</description>
          <display-name>Spring context loader</display-name>
          <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
     </listener>
     <filter>
          <description>Enables Acegi Security framework integration. Acegi is used to secure services.
          Standard J2EE is used to secure web requests.</description>
          <filter-name>AcegiFilterChainProxy</filter-name>
          <filter-class>org.acegisecurity.util.FilterToBeanProxy</filter-class>
          <init-param>
               <param-name>targetClass</param-name>
               <param-value>org.acegisecurity.util.FilterChainProxy</param-value>
          </init-param>
     </filter>
     <filter-mapping>
          <filter-name>AcegiFilterChainProxy</filter-name>
          <servlet-name>FacesServlet</servlet-name>
     </filter-mapping>
     <filter>
          <description>Pre-processes requests to enable MyFaces extensions</description>
          <filter-name>MyFacesExtensionsFilter</filter-name>
          <filter-class>org.apache.myfaces.webapp.filter.ExtensionsFilter</filter-class>
         <init-param>
         
               <param-name>uploadMaxFileSize</param-name>
                <param-value>6m</param-value>
         </init-param>
         <init-param>
               <param-name>uploadThresholdSize</param-name>
                <param-value>100k</param-value>
         </init-param>
     </filter>
     
     <filter-mapping>
          <filter-name>MyFacesExtensionsFilter</filter-name>
         <servlet-name>FacesServlet</servlet-name>
     </filter-mapping>
     
     <filter-mapping>
         <filter-name>MyFacesExtensionsFilter</filter-name>
         <url-pattern>/faces/myFacesExtensionResource/*</url-pattern>
     </filter-mapping>
     <filter>
          <description>Pre-processes requests to enable ADF Faces functionality</description>
          <filter-name>AdfFacesFilter</filter-name>
          <filter-class>oracle.adf.view.faces.webapp.AdfFacesFilter</filter-class>
     </filter>
     <filter-mapping>
          <filter-name>AdfFacesFilter</filter-name>
         <servlet-name>FacesServlet</servlet-name>
     </filter-mapping>
     
     <filter>
          <filter-name>sitemesh</filter-name>
          <filter-class>com.opensymphony.module.sitemesh.filter.PageFilter</filter-class>
     </filter>
     <filter-mapping>
          <filter-name>sitemesh</filter-name>
          <url-pattern>/*</url-pattern>
     </filter-mapping>
     
     <filter>
          <filter-name>OpenSessionInViewFilter</filter-name>
          <filter-class>org.springframework.orm.hibernate3.support.OpenSessionInViewFilter</filter-class>
          <init-param>
               <param-name>sessionFactoryBeanName</param-name>
               <param-value>ciasSessionFactory</param-value>
          </init-param>
          <init-param>
               <param-name>singleSession</param-name>
               <param-value>false</param-value>
          </init-param>
     </filter>
     <filter-mapping>
          <filter-name>OpenSessionInViewFilter</filter-name>
          <servlet-name>FacesServlet</servlet-name>
     </filter-mapping>
     
     <filter>
          <filter-name>SessionTimeout Filter</filter-name>
          <filter-class>com.unyric.cias.cm.web.filter.SessionTimeoutFilter</filter-class>
          <init-param>
               
               <param-name>redirectUrl</param-name>
               <param-value>timeOut.jsp</param-value>
          </init-param>
          <init-param>
               <param-name>sessionTimeout</param-name>
               
               <param-value>20</param-value>
          </init-param>
     </filter>
     <filter-mapping>
          <filter-name>SessionTimeout Filter</filter-name>
          <url-pattern>/secure/*</url-pattern>
     </filter-mapping>
     
     <session-config>
          <session-timeout>99</session-timeout>
     </session-config>
     
     <security-constraint>
          <web-resource-collection>
               <web-resource-name>FacesServlet security</web-resource-name>
               <url-pattern>*.do</url-pattern>
               
          </web-resource-collection>
          <web-resource-collection>
               <web-resource-name>View security</web-resource-name>
               <url-pattern>/secure/*</url-pattern>
               
          </web-resource-collection>
          <auth-constraint>
               <description>Allow any authenticated user</description>
               <role-name>*</role-name>
          </auth-constraint>
      </security-constraint>
     <login-config>
          <auth-method>BASIC</auth-method>
          <realm-name>CIAS-CM</realm-name>
     </login-config>
     <security-role>
          
          
             <role-name>case</role-name>
     </security-role>
     <welcome-file-list>
          <welcome-file>index.jsp</welcome-file>
     </welcome-file-list>
     
     <resource-ref>
          <res-ref-name>jdbc/cias</res-ref-name>
            <res-type>javax.sql.DataSource</res-type>
            <res-auth>Container</res-auth>
            <res-sharing-scope>Shareable</res-sharing-scope>
        </resource-ref>
     
     <error-page>
             <error-code>500</error-code>
             <location>/secure/errorPage.jsp</location>
     </error-page>
     <error-page>
          <exception-type>javax.faces.FacesException</exception-type>
          <location>/secure/errorPage.jsp</location>
     </error-page>
</web-app>Does anyone have any suggestions? Telling websphere to load the web-inf\lib directory before the AppServer\lib directory seems to have somewhat worked, but not completely.
On a side note, if I have a page such as (ignoring the extra h, f and t declarations)
<%@ taglib prefix="h"uri="http://java.sun.com/jsf/html" %>
<%@ taglib prefix="f" uri="http://java.sun.com/jsf/core" %>
<%@ taglib prefix="t" uri="http://myfaces.apache.org/tomahawk" %>
<%@ taglib prefix="af" uri="http://xmlns.oracle.com/adf/faces" %>
<f:view>
     <af:document>
          <af:form>
               <af:outputText value="hello2"/>
               <af:commandLink id="button" action="#{exploreCaseListAction.promptPersonalQueue}" text="Login"/>
          </af:form>
     </af:document>
</f:view>When I click on the commandLink button, I receive an error that states
java.lang.ClassCastException: org.apache.xalan.processor.TransformerFactoryImpl incompatible with javax.xml.transform.TransformerFactory
at javax.xml.transform.TransformerFactory.newInstance(Unknown Source)
at com.ibm.ws.jsp.translator.visitor.validator.PageDataImpl._getInputStream(PageDataImpl.java:125)
at com.ibm.ws.jsp.translator.visitor.validator.PageDataImpl.getInputStream(PageDataImpl.java:117)
at org.apache.taglibs.standard.tlv.JstlBaseTLV.validate(JstlBaseTLV.java:156)
at org.apache.taglibs.standard.tlv.JstlCoreTLV.validate(JstlCoreTLV.java:96)
at com.ibm.ws.jsp.translator.visitor.validator.ValidateVisitor.validateTagLib(ValidateVisitor.java:988)
at com.ibm.ws.jsp.translator.visitor.validator.ValidateVisitor.visitJspRootStart(ValidateVisitor.java:467)
at com.ibm.ws.jsp.translator.visitor.JspVisitor.processJspElement(JspVisitor.java:138)
at com.ibm.ws.jsp.translator.visitor.JspVisitor.visit(JspVisitor.java:121)
at com.ibm.ws.jsp.translator.JspTranslator.processVisitors(JspTranslator.java:121)
at com.ibm.ws.jsp.translator.utils.JspTranslatorUtil.translateJsp(JspTranslatorUtil.java:181)
at com.ibm.ws.jsp.translator.utils.JspTranslatorUtil.translateJspAndCompile(JspTranslatorUtil.java:83)
at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.translateJsp(AbstractJSPExtensionServletWrapper.java:349)
at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper._checkForTranslation(AbstractJSPExtensionServletWrapper.java:317)
at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.checkForTranslation(AbstractJSPExtensionServletWrapper.java:226)
at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.handleRequest(AbstractJSPExtensionServletWrapper.java:131)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:308)
at org.apache.myfaces.context.servlet.ServletExternalContextImpl.dispatch(ServletExternalContextImpl.java:416)
at org.apache.myfaces.application.jsp.JspViewHandlerImpl.renderView(JspViewHandlerImpl.java:234)
at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
at org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:384)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:138)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:966)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:907)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
at org.springframework.orm.hibernate3.support.OpenSessionInViewFilter.doFilterInternal(OpenSessionInViewFilter.java:174)
at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:77)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:144)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:264)
at com.unyric.cias.cm.web.filter.ThreadContextSessionIntegrationFilter.doFilter(ThreadContextSessionIntegrationFilter.java:46)
at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:274)
at org.acegisecurity.intercept.web.FilterSecurityInterceptor.invoke(FilterSecurityInterceptor.java:107)
at org.acegisecurity.intercept.web.FilterSecurityInterceptor.doFilter(FilterSecurityInterceptor.java:72)
at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:274)
at org.acegisecurity.wrapper.SecurityContextHolderAwareRequestFilter.doFilter(SecurityContextHolderAwareRequestFilter.java:81)
at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:274)
at com.unyric.cias.cm.web.filter.CiasIntegrationFilter.doFilter(CiasIntegrationFilter.java:112)
at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:274)
at org.acegisecurity.context.HttpSessionContextIntegrationFilter.doFilter(HttpSessionContextIntegrationFilter.java:193)
at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:274)
at org.acegisecurity.util.FilterChainProxy.doFilter(FilterChainProxy.java:148)
at org.acegisecurity.util.FilterToBeanProxy.doFilter(FilterToBeanProxy.java:98)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)I believe they are related, though I can't 100% say for sure. Any thoughts?

I'm having the same problem, did you get any luck with this ?
Thanks

Using a view-object as a data web bean?

Hi,
When writing JSP pages, I'd like to have a web bean that allows basic data manipulation such as:
- set up a row set - e.g. by specifying a view object and an (optional) where clause;
- navigate this row set (first, next, etc.);
- get or set the values of the attributes of the current row;
- insert, update or delete a row;
- commit or rollback the modifications;
- etc.
This bean should be "silent" - i.e. it would not have to be able to "render" anything - instead, I would use it in <%= bean.method() %> tags, or in <% ...java code... %> sections, in conjunction with other (custom) beans.
I guess I could use a view object - but:
1) How would I have to use it in a JSP context?
2) Or, are there more appropriate objects to do this job?
3) What methods could I use (i.e. where are they documented)?
4) What pitfalls should I be aware of (most notably related to housekeeping after bean use)?
Any information greatly appreciated!
Thanks in advance,
Serge

Hi,
When writing JSP pages, I'd like to have a web bean that allows basic data manipulation such as:
- set up a row set - e.g. by specifying a view object and an (optional) where clause;
- navigate this row set (first, next, etc.);
- get or set the values of the attributes of the current row;
- insert, update or delete a row;
- commit or rollback the modifications;
- etc.
This bean should be "silent" - i.e. it would not have to be able to "render" anything - instead, I would use it in <%= bean.method() %> tags, or in <% ...java code... %> sections, in conjunction with other (custom) beans.
I guess I could use a view object - but:
1) How would I have to use it in a JSP context?
2) Or, are there more appropriate objects to do this job?
3) What methods could I use (i.e. where are they documented)?
4) What pitfalls should I be aware of (most notably related to housekeeping after bean use)?
Any information greatly appreciated!
Thanks in advance,
Serge

Sun cluster 3.2 - resource hasstorageplus taking too much time to start

I have a disk resource called "data" that takes too much time to startup when performing a switchover. Any idea what may control this ?
Jan 28 20:28:01 hnmdb02 Cluster.Framework: [ID 801593 daemon.notice] stdout: becoming primary for data
Jan 28 20:28:02 hnmdb02 Cluster.RGM.rgmd: [ID 350207 daemon.notice] 24 fe_rpc_command: cmd_type(enum):<3>:cmd=<null>:tag=<hnmdb.data.10>: Calling security_clnt_connect(..., host=<hnmdb02>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<0>, ...)
Jan 28 20:28:02 hnmdb02 Cluster.RGM.rgmd: [ID 316625 daemon.notice] Timeout monitoring on method tag <hnmdb.data.10> has been resumed.
Jan 28 20:34:57 hnmdb02 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_prenet_start> completed successfully for resource <data>, resource group <hnmdb>, node <hnmdb02>, time used: 23% of timeout <1800 seconds>

heldermo wrote:
I have a disk resource called "data" that takes too much time to startup when performing a switchover. Any idea what may control this ?I'm not sure how this is supposed to be related to Messaging Server. I suggest you ask your question in the Cluster forum:
http://forums.sun.com/forum.jspa?forumID=842
Regards,
Shane.

Getting (WHND) of windows applications

Hi,
I am trying to develop an application that on windows retrives the handles of a couple of native windows applications, to see if I can remote controll them using the message quea. I am not sure this is the right forum, but the one that seems to match most. I have unsuccesfully tried a couple of other forums.
Does some one know how to retrieve a handle from another application please?
Even without using J/Direct please?
Thanks in advance.
Michael (fairly inexperienced)

Getting the HWND of a Win32 application depends largely on your understanding of the Windows architecture. There are two main approaches from a total-solution perspective. BOTH perspectives rely on Java Native Interface API, but they use it differently. After you decide which of these two options to choose, you need to ask yourself, What input parameters can I provide to determine which Window's HWND I need?
1. Use the JNI, or a third-party library based upon it, to map individual Win32 API calls (like EnumWindows) into a Java class. Then write a Java program that calls these Win32 methods tagged as native in Java. This is the strategy used to implement the Standard Widget Toolkit, by the way...
2. Use the JNI, but in a different way, to call a more complicated Win32 procedure (rather than just the basics of JNI, which allow you to call a DLL which was written in C.) You could use Njawin, for example, to call into a COM DLL (like a Visual Basic application) which itself provides a more complete solution to the problem. APIs like Jawin, JIntegra, Njawin, and JacobGen will take a complicated Win32 binary module (a DLL, TLB, etc. depending upon which solution we're talking about) and interoperate it with Java, allowing you to retrieve Pure Java return types, call methods synchronously or asynchronously, etc.
If you are going to be invoking further native functionality after you get the HWND (as you hinted with the message queue), you will probably want to go with Solution 2; coding directly to the Win32 API is not necessary in many situations. If you need to use JAVA as the front end to your program, but you want a lot of native functionality, then:
1. Write all your native functionality in a high-level, object-oriented, COM-enabled Win32 programming language like Delphi, VB, C++, etc.
2. Code the main native procedure into a public object inside a COM DLL, and use JacobGen or Njawin to be able to call that method from inside Java.

Rs-ora:resource group failed to start on chosen node; it may end up failing

I have configured two node failover cluster environment using netra a/d 1000 storage. When I try to deploy oracle server application it throws the following error
rs-ora: resource group failed to start on chosen node; it may end up failing over to other node(s)
I created metaset and gave one raw did disk to that metaset.
I created logical hostname resource, ha-storage plus resource. Later I brought the resource group to online using following command
#clrg online emM rg-ora
Later I created oracle cluster resource using following command.
#clrs create -g rg-ora -t SUNW.oracle_server -p ORACLE_HOME=/global/oracle/product/10.2.0/db_1 -p ORACLE_SID=infra -p Alert_log_file=/global/oracle/product/10.2.0/db_1/admin/infra/bdump/alert_infra.log -p Connect_string=sysdba/dbadmin1@infra -p Resource_dependencies=rs-ora-has rs-ora
node1 - Validation failed. ORACLE_HOME /global/oracle/product/10.2.0/db_1 does not exist
node1 - ALERT_LOG_FILE /global/oracle/product/10.2.0/db_1/admin/infra/bdump/alert_infra.log doesn't exist
node1 - PARAMETER_FILE: /global/oracle/product/10.2.0/db_1/dbs/initinfra.ora nor server PARAMETER_FILE: /global/oracle/product/10.2.0/db_1/dbs/spfileinfra.ora exists
node1 - This resource depends on a HAStoragePlus resouce that is not online on this node. Ignoring validation errors.
rs-ora: resource group failed to start on chosen node; it may end up failing over to other node(s)
The status of oracle resource shows as follows.
Resource Name Node Name State Status Message
rs-ora node1 Start failed Faulted
I used solaris 10 update 6 patch level is Generic_137137-09, Oracle version 10.2.0, Sun clusters 3.2 update1. Following are the vfstab and /var/adm/messages of both nodes.
Node1#grep ora /etc/vfstab
/dev/md/oradg/dsk/d300 /dev/md/oradg/rdsk/d300 /global/oracle ufs 5 no logging
Node2#grep ora /etc/vfstab
/dev/md/oradg/dsk/d300 /dev/md/oradg/rdsk/d300 /global/oracle ufs 5 no logging
Node1#more /var/adm/messages
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_prenet_start> for resource <ha-
host-1>, resource group <rg-ora>, node <node1>, timeout <300> seconds
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hafoip/hafoip_prenet_start>:tag=<rg-ora.ha-host-1.10>: Calling security_clnt_connect(..., host=<node1>, sec_typ
e {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_prenet_start> completed successfully for
resource <ha-host-1>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <300 seconds>
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_prenet_start> for resour
ce <rs-ora-has>, resource group <rg-ora>, node <node1>, timeout <1800> seconds
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hastorageplus/hastorageplus_prenet_start>:tag=<rg-ora.rs-ora-has.10>: Calling security_clnt_connect(..., host=<tes
tlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:18 node1 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<2>:cmd=<null>:tag=<rg-
ora.rs-ora-has.10>: Calling security_clnt_connect(..., host=<node1>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<0>, ...)
Oct 17 05:19:18 node1 Cluster.RGM.rgmd: [ID 316625 daemon.notice] Timeout monitoring on method tag <rg-ora.rs-ora-has.10>
has been suspended.
Oct 17 05:19:20 node1 Cluster.Framework: [ID 801593 daemon.notice] stdout: becoming primary for oradg
Oct 17 05:19:21 node1 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<3>:cmd=<null>:tag=<rg-
ora.rs-ora-has.10>: Calling security_clnt_connect(..., host=<node1>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<0>, ...)
Oct 17 05:19:21 node1 Cluster.RGM.rgmd: [ID 316625 daemon.notice] Timeout monitoring on method tag <rg-ora.rs-ora-has.10>
has been resumed.
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_prenet_start> completed successful
ly for resource <rs-ora-has>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <1800 seconds>
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_start> for resource <ha-host-1>
, resource group <rg-ora>, node <node1>, timeout <500> seconds
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hafoip/hafoip_start>:tag=<rg-ora.ha-host-1.0>: Calling security_clnt_connect(..., host=<node1>, sec_type {0:WEA
K, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_start> completed successfully for resourc
e <ha-host-1>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <500 seconds>
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_monitor_start> for resource <ha
-host-1>, resource group <rg-ora>, node <node1>, timeout <300> seconds
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_start> for resource <rs-
ora-has>, resource group <rg-ora>, node <node1>, timeout <90> seconds
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hafoip/hafoip_monitor_start>:tag=<rg-ora.ha-host-1.7>: Calling security_clnt_connect(..., host=<node1>, sec_typ
e {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hastorageplus/hastorageplus_start>:tag=<rg-ora.rs-ora-has.0>: Calling security_clnt_connect(..., host=<node1>,
sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_start> completed successfully for
resource <ha-host-1>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <300 seconds>
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_start> completed successfully for
resource <rs-ora-has>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <90 seconds>
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_monitor_start> for resou
rce <rs-ora-has>, resource group <rg-ora>, node <node1>, timeout <90> seconds
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hastorageplus/hastorageplus_monitor_start>:tag=<rg-ora.rs-ora-has.7>: Calling security_clnt_connect(..., host=<tes
tlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_monitor_start> completed successfu
lly for resource <rs-ora-has>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <90 seconds>
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/oracle_server_validate> for resour
ce <rs-ora>, resource group <rg-ora>, node <node1>, timeout <120> seconds

Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscor/
oracle_server/bin/oracle_server_validate>:tag=<rg-ora.rs-ora.2>: Calling security_clnt_connect(..., host=<node1>, sec_type
{0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <bin/oracle_server_validate> completed successful
ly for resource <rs-ora>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <120 seconds>
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/oracle_server_init> for resource <
rs-ora>, resource group <rg-ora>, node <node1>, timeout <30> seconds
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscor
/oracle_server/bin/oracle_server_init>:tag=<rg-ora.rs-ora.4>: Calling security_clnt_connect(..., host=<node1>, sec_type {0
:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <bin/oracle_server_init> completed successfully f
or resource <rs-ora>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <30 seconds>
Oct 17 05:19:38 node1 Cluster.CCR: [ID 973933 daemon.notice] resource rs-ora added.
Oct 17 05:19:39 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/oracle_server_start> for resource
<rs-ora>, resource group <rg-ora>, node <node1>, timeout <600> seconds
Oct 17 05:19:39 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscor
/oracle_server/bin/oracle_server_start>:tag=<rg-ora.rs-ora.0>: Calling security_clnt_connect(..., host=<node1>, sec_type {
0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:48 node1 SC[SUNWscor.oracle_server.start]:rg-ora:rs-ora: [ID 876834 daemon.error] Could not start server
Oct 17 05:19:48 node1 Cluster.RGM.rgmd: [ID 938318 daemon.error] Method <bin/oracle_server_start> failed on resource <rs-o
ra> in resource group <rg-ora> [exit code <1>, time used: 1% of timeout <600 seconds>]
Node2# more /var/adm/messages
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 529407 daemon.notice] resource group rg-ora state on node node2 change to RG_PENDIN
G_OFFLINE
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_MON_STOPP
ING
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_MON_STOPPI
NG
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_monitor_stop> for resource <ha-host
-1>, resource group <rg-ora>, node <node2>, timeout <300> seconds
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_monitor_stop> for resource <
rs-ora-has>, resource group <rg-ora>, node <node2>, timeout <90> seconds
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 268902 daemon.notice] 45 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
rgm/rt/hafoip/hafoip_monitor_stop>:tag=<rg-ora.ha-host-1.8>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK
, 1:STRONG, 2:DES} =<1>, ...)
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
rgm/rt/hastorageplus/hastorageplus_monitor_stop>:tag=<rg-ora.rs-ora-has.8>: Calling security_clnt_connect(..., host=<node2>, s
ec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_monitor_stop> completed successfully f
or resource <rs-ora-has>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <90 seconds>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_ONLINE_UN
MON
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_STOPPING
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource rs-ora-has status on node node2 change to R_FM_UNKNO
WN
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource rs-ora-has status msg on node node2 change to <Stopp
ing>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_stop> for resource <rs-ora-h
as>, resource group <rg-ora>, node <node2>, timeout <1800> seconds
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
rgm/rt/hastorageplus/hastorageplus_stop>:tag=<rg-ora.rs-ora-has.1>: Calling security_clnt_connect(..., host=<node2>, sec_type
{0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_stop> completed successfully for reso
urce <ha-host-1>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <300 seconds>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_ONLINE_UNM
ON
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_stop> completed successfully for resou
rce <rs-ora-has>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <1800 seconds>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_STOPPED
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_STOPPING
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_stop> for resource <ha-host-1>, res
ource group <rg-ora>, node <node2>, timeout <300> seconds
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource ha-host-1 status on node node2 change to R_FM_UNKNOW
N
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource ha-host-1 status msg on node node2 change to <Stoppi
ng>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
rgm/rt/hafoip/hafoip_stop>:tag=<rg-ora.ha-host-1.1>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRO
NG, 2:DES} =<1>, ...)
Oct 14 20:20:06 node2 ip: [ID 678092 kern.notice] TCP_IOC_ABORT_CONN: local = 192.168.032.244:0, remote = 000.000.000.000:0, s
tart = -2, end = 6
Oct 14 20:20:06 node2 ip: [ID 302654 kern.notice] TCP_IOC_ABORT_CONN: aborted 0 connection
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource ha-host-1 status on node node2 change to R_FM_OFFLIN
E
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource ha-host-1 status msg on node node2 change to <Logica
lHostname offline.>
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_stop> completed successfully for resource <ha
-host-1>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <300 seconds>
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_OFFLINE
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_POSTNET_S
TOPPING

method tag

Similar Messages

Maybe you are looking for