Minimum and maximum order qty

we want to configure minimum and maximum allowed order qty in STO for our internal stock transfers.
plz suggest the config steps to be follow for deploying this activity.

My requirement is for intercompany stock transfers scenario.
assume that there are plants 101 and 102, when ever STO through ME21N is occuring system should cross check with minimum order qty for given materials failure of which system should give error message, same way from supplying plant system should check minimum delivery qty for receiving plant failure of which system should give error message and should not allow for outbound delivery.
suggest the process need to configure.

Similar Messages

  • Minimum and Multiple Order Qty attributes by product

    What are the options for managing Sales Order Multiples. Would like to have the option of setting required or optional quantities. For example, Product A is shipped on a pallet with 12 units. Would like orders to be managed as 12, 24, 36 etc. In other words, the 12 would also become an order minimum. In some cases this should be mandatory. Is this an item master field? If not, how is it normally managed? As an added bonus, the ability to flag these multiples as mandatory for only certain customers or sales channels would be better still. Any ideas?
    Thanks,
    Chris

    Hi,
    This is the definition of your questions:
    Order Multiple u2013 you can set a multiplication factor for ordering the item e.g. in
    case you define 5 in this field and14 items are required, the MRP will recommend to
    order 15 items (3X5=15). If 18 items are required, the recommendation will be to
    order 20 items (4X5).
    Minimum Order Qty u2013 you can type a minimum quantity for ordering items by the MRP.
    The planning data is apply when there is a requirement (sales order, forecast, production orders (for the child item) and reserve invoice.
    JimM

  • Minimum Order Quantity and Maximum Order Quantity

    Hi Gurus
    Can u fix the Minimum and Manximum Order Quantity for a Particular Sales Order.
    if i enter the Minimum Order Quantity in Material Master Record (Sale Org--1 tab), it is working.  But it is happening with all the order types.
    My requirement is i need this to be happend with only a particular Order type YOR and not with ZOR.
    Mininum Order Qty        - 5 ea, and
    Maximum Order Qty      - 10 ea.
    so that for this order type YOR for any material the order qty for a line item cannot be less than 5 qty and more than 10 qty
    is there any way to do this,
    if it is possible by creating an User Exit, please give me Step-by-Step solution.
    I do now know how to Create USER EXITS
    babu rao

    HI BABUR,
    try to do it in userexit , first in a test system.
    you can try userexit MV45AFZZ.
    SE38 and programm name MV45AFZZ.
    there you can see fields of vbak, vbap or xvbak , xvbap.
    the last two are structures.

  • Minimum and maximum allowed order qty

    we want to configure minimum and maximum allowed order qty in STO for  our internal stock transfers.
    plz suggest the config steps to be follow for deploying this activity.

    Hi
    I think this requirment is for  Retail industry, like stock transfer between stores, clarify
    Its not possible in standard I hope, because its purchase order related, check with ABAPer you can implement BAPI and control this setting error message if quantity is differ from Min and max you entered. system should not save the STO if quantity is mismatch, you can achive this through User exist or BAPI.
    regard
    Satish

  • Minimum and maximum quantities in sales order

    Hello friends,
    Can anyone tell me how to maintain minimum quantity in sales order, (Not Minimum order quantity of material master) as only maximum (target) quantity is maintainable in sales order at Item level? So after this development in sales order, one can enter two quantities (minimum and maximum) so that sale can be done between this quantity range.
    I know this is not possible without exits or developments, but please tell if someone has came across the same scenario which exits used by you.
    Thanks in advance
    Warm regards
    Amit

    Min/Max quantity by sales order line items, but not by material?
    You can have your abapper code the Additional Data B screen user exits at the line item level.  You will add two quantity fields - min qty and max qty.  You will also have to code USEREXIT_CHECK_VBAP to enforce the rule that order quantity is between the limits.

  • Production order and planned order qty should not consider in MRP

    Dear All,
    i do not want to consider the previous month production order qty and plenned order qty (Nothing but WIP qty) in the current momth MRP, but the stock has to consider in MRP.
    Example,
    Before MRP,
    material : XYZ
    Stock : 1000
    Prod Qty : 500 for 02.04.2008
    PIR Qty : 2000 for 02.05.2008
    After MRP, the requirement should be as below said,
    material : XYZ
    Stock : 1000
    Prod Qty : 500 for 02.04.2008
    PIR Qty : 2000 for 02.05.2008
    Pld OrdQty : 1000 for 02.05.2008
    For the above requirement ,i have done settings in the availabilty check like , for include planned order and include production order are "DO NOT TAKE IN ACCOUNT".
    Even then also the planned order qty is generating for the "500" only.
    please give the solution for the above said requirement.
    thanx in advance
    Regards
    Srinivas

    hi
    MRP will always consider the prod order qty while doing nert req calculation.One thing u can do is TECo the prod orders and un MRP then it wont consider prod order qty.
    The Availability check will check whether the components r avalaible or not based on ur scope of check
    Reward points if useful
    Amit

  • Change Datepicker Minimum and Maximum Value

    Hi everyone,
    I have a date item with minimum and maximum dates from 2 hidden items.
    The problem is that when i change the value of thos 2 hidden items , the minimum and maximum dates in my datepicker doesn't change.
    I've tried refreshing the date item but it still doesn't work.
    Kind Regards,
    Cearnau Dan
    APEX 4.0.1

    Geert,
    Thanks for your reply. I tried making the hidden item to not protected as you suggested. Changing it to not protected had no effect on setting the Min/Max values of the date picker.
    After reading the following thread I have had some success using javascript to the min/max option of the date picker.
    Re: Dynamic Action On Date Picker
    Documentation on jquery date picker.
    http://jqueryui.com/demos/datepicker/
    Thanks,
    Todd

  • How to set minimum and maximum X scale in the XY graph if i have a X scale time format ?

    Hi,
    i choose in the picture enclosed, a time format for the X scale of the XY Graph.
    The problem is that i am not able to set the minimum and maximum of the X scale: In fact the property nodes of the minimum and maxinum X scales ask for  double as input.
    But i need to set my minimum and maximum X scale to be a time (because I already set the X scale format to a time)
    Could u help me please ?
    Samer,
    Attachments:
    scale.JPG ‏8 KB

    please i have another problem:
    i put the XY Graph in a while loop with maximum and minimum Xscale as property nodes inputs.
    The problem is that when i make a zoom  i can just see the zoom for a little while and then (because of the while loop) the Xscale is updated.
    is there a method so that the Xscale be updated just when i change its value ?
    or Could u tell me how could i zoom properly ?
    Samer,
    Attachments:
    zoom.JPG ‏11 KB

  • How toset maximum order qty in sales order

    Dear Gurus,
                     how to set maximum order qty in sales order level ,  my target qty is 100000 nos,  against this i will do billing  , when it reaches 100000 nos , system should not allow to create outbound or billing , how to achive this.
    regards
    rajakarthik

    That depends on the control you set in Item Caterogy KMN.
    You have following options in Completion Rule:
    A - Item is completed with the first reference
    B - Item is completed after full quantity has been referenced
    C - Item is completed after the target qty is fully referenced
    D - Item is referenced via contract release
    E - Item is completed after full target value is referenced
    So if you set "C" in Completion Rule in Item Category, system will not allow to create Sales Order after the Target Quantity is fully used.
    Hope this helps..
    Thanks,
    Jignesh Mehta

  • Setting the Minimum and Maximum Y Axis Points

    Hi,
    I have an Application where I need to plot the charts using Time-Scatter Graph .
    I am using 2 Y-Axis.
    But I am unable to dynamically set the Minimum and Maximum y-axis points through code.
    Currently I have set the Minimum and Maximum points for the Y Axis in BG (Business Graphics) Design Time.
    Please suggest if we can set the Min & Max values through code as it is very cumbersome to manually set the Min and Max Values for say around 400 odd charts.
    We are unable to set the Chart Title too dynamically.
    Thanking in advance,
    Poojith

    Any Experts here.. Please help

  • Minimum and maximum quantity

    Dear All,
    Can any one help me by telling that is there any way system automatically defining minimum quantity and maximum quantity, i know that if we define it in the material master then while MRP run it will pick up if it is on minimum level i wanna know is there any way that system suggest itself minimum and maximum on base of history of transactions.
    reagrds,
    Qasim Malik

    How we can maintain the minimum / maximum level in the material master, is there any report to find out the minimum / maximum level of the material.
    Regards
    Kashif

  • Minimum and maximum memory for starting OSB domain.

    Hi,
       How much minimum/maximum default of memory do we need to run welogic domain for OSB ? I know we can use java comand with Xmx and Xms to set amount of memory to run domain. I want to know minimum and maximum default when we start domain.
    Many thanks.

    Dear All,
    I have attach a VI. Bascially, i want to control the maximum and minimum points using the control by keying in the timestamp date and time. How do i do that/
    Thanks!
    Attachments:
    test5.txt ‏1 KB
    timestamp.vi ‏14 KB

  • MINIMUM AND MAXIMUM LEVAL OF MATERIAL

    HI
       EXPERT
    Can you everybody tell me standard report for maximum and minimum leval of material or any customization
    Thanks&Regards
      vijay

    hi,
    there are 8 levels in Sap
    In materail master in the MRP1 Tab under Lot Size Data you have two options
    Minimum Lot size and maximum lot size These two options would help you in determining the lot size when Placing a PO
    setting the values in here will create a PO for minimum lot size Qty even if you give lessthan the qty specified in that field
    In the same Material master Under Purchasing tab you have a check box Automatic PO flag this option as well
    It Defines that purchase orders are generated automatically when purchase requsisitions are converted into purchase orders.
    At the same time in the master record for the vendor with whom the material is ordered, the field "Automatic purchase order" must be flagged in the control data for the purchasing data.
    Now PO's are generated automatically with the specified minimum order value
    How ever this scenarion would be possible only if we are running MRP and finding material requirement and generating PR & PO automatically
    I doubt it would work if you are creating PO manually
    If found helpful, reward me.
    Thanks & regards
    Swathi

  • User Exit for VA01: Maximum Order Qty

    Dear All,
    I have a requirement of restricting the total order qty in the Sales order for a particular order type. I am using exit V45A0003. In this I have put a check on the material qty and have given an error message if it exceeds the permissible limits. However, as soon as the error message is generated, the system gives an abend message saying the Item is not created. Kindly let me know how to handle this.
    Also for using the include mv45afzz and form USEREXIT_SAVE_DOCUMENT_PREPARE the system asks me for an access key. I believe this is an exit and access key would not be required for this.
    Regards
    Anurag Agarwal

    Hi
    Access key necessary to implement the function exit like MV45AFZZ. But be careful while coding in to the MV45AFZZ.
    If you want to check the order Qty you should write the code in to the perform called Transfer value to VBAP table.
    This will helps you out 
    Regards,
    Hiren

  • What's the minimum and maximum of the type I?

    Hi,
    Suddenly, I want to know the minimum and the maximum of the elementary type I with the sign.
    Who can tell me?

    Hi,
    INT1: Single-byte integer : 3(max size)
    INT2 :  Two-byte integer :  5
    INT4 :  Four-byte integer: 10
    Reward if useful
    Regards
    Shiva

Maybe you are looking for

  • How do I delete the search feature from the bookmarks section (left side of the window when open)? Just the search feature in bookmarks.

    I don't know if it's always been there, but there is a search box now at the top of my Bookmarks toolbar that opens on the left side of my window. When the Bookmarks toolbar is open the first thing is Bookmarks and the X to close bookmarks. Just belo

  • Acrobat XI Toolbar Broken in Word 2013

    For some time I have been frustrated with an issue with the Acrobat plugin for Word 2013. The problem manifests as follows: All icons in the Acrobat toolbar disappear as below. Clicking Preferences, Create PDF, etc. works fine. I can set conversion p

  • Save custom order of an ul     (HTML/Javascript - application)

    I created a simple application with HTML and jQuery, in which you can dynamically change the order of an unordered list (via drag'n'drop). Now I want my application to remember the current order of the list when I close it. When starting the applicat

  • Aperture does not want to open in Loin

    I just renstalled the operating system because there was a problem with the origional install. I downloaded Aperture from the App store and now it won't open. It was working on the installation I had going before (even though it was faulty) Now Loin

  • Error when Generating Document Number

    Hi Friends, I am trying to generate Document Number which uses C1-DOC-NBR and generate Document Number . when i click on Freeze/Complete button of bill ,the following error is coming . Document Sequence for Issuing Center HITECH with Branch 1011 and