"Missing the 'PayloadUUID' field".
Hello all,
I am posting this thread in order to find someone to help me regarding an issue that I have when trying to upload a profile from the iPhone Configurstion Utility to my MDM appliance.
So whenever I try to upload the profile I always get this error:
There was an error saving your profile.
The uploaded profile is missing the 'PayloadUUID' field.
Do you happen to know what cause this problem?
I am using the ICU 3.6.2.300 and the only things I have configurd are:
Under the General tab: Name,Identifier,Organization, Security with authentication and password.
Under the Exchange ActiveSync: Account Name, ActiveSync Host and use SSL.
What have I done wrong?
I want to make an update on this. Even if I create a simple profile with only the passcode restrictions configured, when I try to upload it to my MDM appliance, I get the mentioned error.
Similar Messages
-
"iTunes can not run because some of the required fields are missing. Please reinstall iTunes." What the ****? Please help me figure this out. I already removed quicktime (as another thread suggested). I can't get in!
i get same error.
I have uninstalled and reinstalled more times than i care to count. but still i get
itunes cannot run because some of its required files are missing. -
If the connecting fields are missing the data from knvh should be u00BBnullu00AB
Could you help me I would like to have all fields from kna1 (if the connecting fields are missing the data from knvh should be »null«)in following code
select * from kna1 .
select * from knvh where kunnr = kna1-kunnr and vkorg = '0200'.
itab-mandt = kna1-mandt.
itab-stceg = kna1-stceg.
itab-hkunnr = knvh-hkunnr.
itab-datab = knvh-datab.
itab-datbi = knvh-datbi.
append itab. clear itab.
endselect.
endselect.HI,
use the following code
select * from kna1 into table it_kna1.
if sy-subrc = 0.
select * from knvh into table it_knvh
for all entries in IT_kna1
where kunnr = it_kna1-kunnr
and vkorg = '0200'.
if sy-subrc = 0.
loop at it_kna1 into wa_kna1.
itab-mandt = wa_kna1-mandt.
itab-stceg = wa_kna1-stceg.
loop at it_knvh into wa_knvh where kunnr = wa_kna1-kunnr.
itab-hkunnr = wa_knvh-hkunnr.
itab-datab = wa_knvh-datab.
itab-datbi = wa_knvh-datbi.
append itab.
clear itab.
endloop.
endloop.endif.
endif.
I hope this solves your problem
Regards,
Vara -
The Property Inspector is missing the V Space and H Space fields in DW6 - where did they go?
I just downloaded DW6. The Property Inspector is missing the V Space and H Space fields, therefore I am unable to add space around my images. Suggestions?
It is no longer available because the problem with that was that it applied spaces around the image rather than where the user actually wanted them. You now need to use CSS and apply margins and paddings and target exactly where you want them by using something like this:
img {
margin-bottom: 0;
margin-right: 0;
margin-left: 0;
margin-top: 0;
padding-top: 0;
padding-right: 0;
padding-bottom: 0;
padding-left: 0;
img {
border: 0;
padding: 0;
The second style is generic to set margin and padding for all four sides.
Good luck. -
The URL field for iPhone Calendar Events is missing?
iCal on my Mac and my MobileMe Calendar both include a URL field for Events. I don't see the URL field on my iPhone Calendar events??? Am I missing something. I can't automatically have that link sync from iCal or MobileMe? I don't want to always have to manually move the URL into the Notes field.
This is a very annoying - Apple can figure out fancy Multi-tasking and App Folders for iPhone OS 4 but couldn't figure out how to add a simple URL field for Calendar Events??And your question is?
-
Using Crystal XI R1 , Missing the time zone part of a field
Post Author: palm
CA Forum: Formula
Hello, I have a field in Oracle 10g database which is like this 29-SEP-07 11.00.00 PM US/CENTRAL When i pull this field in Crystal i am getting like this 9/29/2007 11:00:00PM I am missing the Time Zone " US/CENTRAL " How to get this Part into Crystal XI R1? Any help would be appreciated !!Post Author: plm
CA Forum: Formula
Hi,
The formula is as I stated above. Run it first, and see if the Time Zone is included in the result.
To create and run the formula, right click on Formulas > New Formula > Call it Time Zone > Insert the text above replacing with your date field > Drag the formula to the Page or Report Header > F5 > Yes.
Basically, the idea behind the ToText function is to extract the exact value from your date field, hoping that CR will not truncate the Time Zone. If it does then it means that there is a compatibility problem between CR and 10g. -
What are the Mandatory Fields in Transaction ME51
Hello Seniors,
I have a requirement about purchase order creation. In this process, I am using the BAPI named " BAPI_PO_CREATE1 ". I have passed all the fields but when I debug and look into the internal tables, I couldn't find certain records. I even debugged " bapiret2" and I see an error which reads "" All mandatory fields are missing"". I have even created a PO in ME51 and found out the mandatory fields but in vain. BAPIRET2 still says, there are some more mandatory fields missing. I need to know what are all the mandatory fields to create a Purchase order using TCODE - ME51.
Your reply is most awaited and rewarded.
Thanks and Regards,
MARKIVhi ,
Functionality
Function module BAPI_PO_CREATE1 enables you to create purchase orders. The BAPI uses the technology behind the Enjoy purchase order transaction ( ME21N).
Alternatively, the IDoc type PORDCR1 is available. The data from this IDoc automatically populates the interface parameters of the function module BAPI_PO_CREATE1.
Functionality in Detail
Authorization
The following authorization objects are checked when an Enjoy purchase order is created (activity 01):
M_BEST_BSA (document type in PO)
M_BEST_EKG (purchasing group in PO)
M_BEST_EKO (purchasing organization in PO)
M_BEST_WRK (plant in PO)
Controlling adoption of field values via X bar
For most tables, you can determine via your own parameters in the associated X bar in each case (e.g. PoItemX) whether fields are to be set initial, values inserted via the interface, or default values adopted (e.g. from Customizing or master records) (for example, it is not mandatory to adopt the material group from an underlying purchase requisition - you can change it with the BAPI).
Transfer
Header data
The header data of the Enjoy purchase order is transferred in the table PoHeader.
Item data
The item data of the Enjoy purchase order is stored in the table PoItem (general item data). The delivery schedule lines are stored in the table PoSchedule.
Use the table PoAccount to specify the account assignment information. If account assignments have been specified for services and limits, you show the relevant account assignment line in PoAccount in the table PoSrvAccessValues via the package number of the service or the limit.
Services and limits
Services, free limits and limits with contract reference can be specified in the tables PoServices, PoLimits, and PoContractLimits.
Conditions
Conditions are transferred in the table PoCond; header conditions in the table PoCondHeader. Price determination is reinitiated via the parameter CALCTYPE in the table PoItem.
Vendor and delivery address
The vendor's address can be specified individually in the table PoAddrVendor; the delivery address in the table PoAddrDelivery. If you do not make any individual specification, the fields will be populated via the central address managementfacility.
Note
In this method, the following restrictions apply with regard to addresses:
Addresses can only be created with this method - they cannot be changed. You can only change address data with the method BAPI_ADDRESSORG_CHANGE.
When you create addresses, they are not checked by the method. An Enjoy purchase order may therefore contain faulty address data.
Partner roles
The partners can be maintained individually via the table PoPartner (with the exception of the partner role "vendor").
Import/export data
Import/Export data can be specified per item in the table PoExpImpItem. Foreign trade data can only be transferred as default data for new items.
Texts
Header and item texts can be transferred in the tables PoTextHeader and PoTextItem. Texts for services are imported in the table PoServicesText.
Version Management
You can make use of the Version Management facility via the table AllVersions.
Return
The PO number is returned in the parameter ExpPurchaseOrder. In addition, all information except the service and export/import tables is placed in the output structures.
Return messages
Messages are returned in the parameter Return. This also contains information as to whether interface data has been wrongly or probably wrongly (heuristical interface check) populated. If a PO has been successfully created, the PO number is also placed in the return table with the appropriate message.
Example
Example of population of BAPI interface in the Function Builder
Parameter: POHEADER
COMP_CODE = 1000
DOC_TYPE = NB
ITEM_INTVL = 00001
VENDOR = 0000001000
PMNTTRMS = 0001
PURCH_ORG = 1000
PUR_GROUP = 001
CURRENCY = EUR
Parameter: POHEADERX
COMP_CODE = X
DOC_TYPE = X
ITEM_INTVL = X
VENDOR = X
PMNTTRMS = X
PURCH_ORG = X
PUR_GROUP = X
Parameter: POITEM
PO_ITEM = 00001
MATERIAL = 100-100
PLANT = 1000
STGE_LOC = 0001
QUANTITY = 15.000
TAX_CODE = V0
ITEM_CAT = 0
ACCTASSCAT = K
Parameter: POITEMX
PO_ITEM = 00001
MATERIAL = X
PLANT = X
STGE_LOC = X
QUANTITY = X
TAX_CODE = X
ITEM_CAT = X
ACCTASSCAT = X
Parameter: POSCHEDULE
PO_ITEM = 00001
SCHED_LINE = 0001
DELIVERY_DATE = 02.12.2002
QUANTITY = 6.000
PO_ITEM = 00001
SCHED_LINE = 0002
DELIVERY_DATE = 03.12.2002
QUANTITY = 5.000
PO_ITEM = 00001
SCHED_LINE = 0003
DELIVERY_DATE = 04.12.2002
QUANTITY = 4.000
Parameter: POSCHEDULEX
PO_ITEM = 00001
SCHED_LINE = 0001
PO_ITEMX = X
SCHED_LINEX = X
DELIVERY_DATE = X
QUANTITY = X
PO_ITEM = 00001
SCHED_LINE = 0002
PO_ITEMX = X
SCHED_LINEX = X
DELIVERY_DATE = X
QUANTITY = X
PO_ITEM = 00001
SCHED_LINE = 0003
PO_ITEMX = X
SCHED_LINEX = X
DELIVERY_DATE = X
QUANTITY = X
Parameter: POACCOUNT
PO_ITEM = 00001
SERIAL_NO = 01
QUANTITY = 15.000
GL_ACCOUNT = 0000400000
COSTCENTER = 0000001000
CO_AREA = 1000
Parameter: POACCOUNTX
PO_ITEM = 00001
SERIAL_NO = 01
QUANTITY = X
GL_ACCOUNT = X
COSTCENTER = X
CO_AREA = X
Parameter: POCOND
ITM_NUMBER = 000001
COND_ST_NO = 001
COND_TYPE = PB00
COND_VALUE = 79.900000000
CURRENCY = EUR
CURRENCY_ISO = EUR
COND_UNIT = KG
COND_P_UNT = 1
CHANGE_ID = U
Parameter: POCONDX
ITM_NUMBER = 000001
COND_ST_NO = 000
ITM_NUMBERX = X
COND_TYPE = X
COND_VALUE = X
CURRENCY = X
CHANGE_ID = X
Parameter: POPARTNER
PARTNERDESC = OA
LANGU = EN
BUSPARTNO = 0000001100
PARTNERDESC = GS
LANGU = EN
BUSPARTNO = 0000001200
PARTNERDESC = PI
LANGU = EN
BUSPARTNO = 0000001000
Help in the Case of Problems
1. Note 197958 lists answers to frequently asked questions (FAQs). (Note 499626 contains answers to FAQs relating to External Services Management.)
2. If you have detected an error in the function of a BAPI, kindly create a reproducible example in the test data directory in the Function Builder (transaction code SE37). Note 375886 tells you how to do this.
3. If the problem persists, please create a Customer Problem Message for the componente MM-PUR-PO-BAPI, and document the reproducible example where necessary.
Customer Enhancements
The following user exits (function modules) are available for the BAPI BAPI_PO_CREATE1:
EXIT_SAPL2012_001 (at start of BAPI)
EXIT_SAPL2012_003 (at end of BAPI)
The following user exits (function modules) are available for the BAPI BAPI BAPI_PO_CHANGE:
EXIT_SAPL2012_002 (at start of BAPI)
EXIT_SAPL2012_004 (at end of BAPI)
These exits belong to the enhancement SAPL2012 (see also transaction codes SMOD and CMOD).
There is also the option of populating customer-specific fields for header, item, or account assignment data via the parameter EXTENSIONIN.
Further information
1. Note 197958 contains up-to-date information on the purchase order BAPIs.
2. If you test the BAPIs BAPI_PO_CREATE1 or BAPI_PO_CHANGE in the Function Builder (transaction code SE37), no database updates will be carried out. If you need this function, please take a look at Note 420646.
3. The BAPI BAPI_PO_GETDETAIL serves to read the details of a purchase order. The BAPI cannot read all details (e.g. conditions). However, you can use the BAPI BAPI_PO_CHANGE for this purpose if only the document number is populated and the initiator has change authorizations for purchase orders.
4. Frequently used BAPIs for purchase orders are BAPI_PO_CREATE, BAPI_PO_CREATE1, BAPI_PO_CHANGE, BAPI_PO_GETDETAIL, BAPI_PO_GETITEMS, BAPI_PO_GETITEMSREL, and BAPI_PO_GETRELINFO.
5. For more information on purchase orders, refer to the SAP library (under MM Purchasing -> Purchase Orders) or the Help for the Enjoy Purchase Order, or choose the path Tools -> ABAP Workbench -> Overview -> BAPI Explorer from the SAP menu.
regards
reena -
Hello all
Am using SP Online,
After doing the step by step programing found on
http://www.heathersolomon.com/blog/articles/customitemstyle.aspx
I was able to pull from a contact list the apt #, last name and first name of a contact list onto a subsite. But the information displays' vertically
Example
709
Smith
John
How can I get it to display horizontally?
709 Smith John
Thank You
Pierre
PS: for those who want to do the same, (as per many questions and blogs I have read) if you go to the link above, note that step 17 the original line of code and the one you would need is almost identical except you have to take out the forward slash
after "string" see the correct line of code (as shown on the blog below) but I missed the minor difference which of course prevented the webpart to work properly.
<property name="CommonViewFields" type="string">InternalColumnNameGoesHere,
FieldType</property>
pgg02Hello,
the answer is in step 21 of Heather Solomon's tutorial:
Wrap HTML around the tag to format the data.
Please note!! When the page renders the CQWP, the site grabs the Item Style for each line of data. So we can't add a table and expect that each line of data will be in a row. Instead we get a full table for each line of data.
Keep this in mind as you style the HTML around the data.
You need to create the html structure and place your fields inside. To have the values show up in one row with spaces between them, place the three field calls in the same row, like
<div><xsl:value-of select="@Field1" /> <xsl:value-of select="@Field2" /> <xsl:value-of
select="@Field3" /></div>
cheers, teylyn -
How can I reliably search the "Notes" field in iOS?
I know this isn't strictly an Applescript question, but I've found that the level of knowledge in this particular section of the boards is WAAAAAYYY higher than other sections, so I'm gonna ask this here anyway. FWIW, it does involve AppleScript....
So I really miss the Palm style contact search by first initial and last name. So I wrote an applescript that runs nightly on my iMac and updates any new contacts to include this search term in the notes field. Actually, to be completely honest, some members of this forum wrote most of the script for me.... Anyway, for instance, Joe Smith has "JSmith" placed into the notes field.
Now, usually when I search my contacts like this on my iphone it works like a dream. But sometimes the expected contact does not appear. In those cases, if I open the contact a different way (by searching for "Joe Smith," for instance, I find the contact, open it up, and always find that "JSmith" is actually in the notes field. My Applescript is working like clockwork... that's not the problem. Once I close the Joe Smith contact and retry the "JSmith" search, it now works. What gives?
It's kinda like Spotlight is using a search index for the notes field but not the name itself? And the search index is not getting updated until I manually open the contact? But only on some contacte? Usually it updates itself just fine without my having to open the contact? And then today it failed to find a contact that has had the Palm-seach term in the notes field for at least three weeks. Once I opened it manually, though, it worked.
So... help! Is there a way to force the iphone to manually rebuild whatever database spotlight is using to search the notes field? What's going on?I've turned on BOLD TEXT and turned on REDUCE MOTION but for me it feels like more than just the zooms in and out... I'm getting sick just reading emails and texts or just glancing at the lock screen. It's intant nausea. The only thing I can think of is that it's something to do with refresh rate or frequency of the screen.
I thought I'd just get used to it but it has not subsided. I only hope I don't have to resort to backgrading to iOS 6 or worse, moving to a different brand of phone. -
What are the mandatory fields of BAPI for creating a new purchase order?
Hi friends,
I am very new to XI.My Boss has given me task to create a purchase order using BAPI. I want step by step guide to create it.How will i know which fields are mandatory for BAPI_PO_CREATE?Hi Shweta,
However It depends upon the configuration that which fields to be passed.
But you can check this by running the BAPI in the SAP system by using transaction Se37.
The most commanly used fields are:
HEADER :
DOC_TYPE NB
CO_CODE 9001
PURCH_ORG 9001
PUR_GROUP 900
VENDOR 100000
ITEM
PO_ITEM 00001
MATERIAL MM10
STORE_LOC 01
MAT_GRP 01
SHORT_TEXT SERVICE (optional )
PLANT 9001
NET_PRICE 500
ITEM_SCHEDULE
PO_ITEM 00001
SERIAL_NO 0001
DELIV_DATE 05.04.2008
QUANTITY 1.000
You can run the BAPI with some test data... if something is missing the BAPI will ask for it... the Results are displayed in Return Table.
Regrads,
Sachin -
Will it DESTROY all the active fields if modified?
I have a multi-page PDF file (70+ pages) that was programmed by a software tech in India. Unfortunately he can no longer be reached. I have no idea what software was used.
The attributes of the files are as follows;
It can be opened in Reader
· The file has numerous entry fields that can be entered
· The form automatically populates all the other fields where that same information is requested (name, address, etc.)
· It also computes math entries (adding up separate entries for a total) and again, forwarding those totals where applicable
· The form CAN BE SAVED and worked on later preserving all information already entered. It does NOT have to be flattened and “printed” only. All done in the basic Reader.
Bottom line, the form does everything I want to accomplish. However, there are 2 problems;
· If I edit any text, it then gives me the message that “the form has changed and is no longer interactive”. All the attributes are then missing.
· Also, there are a number of balloon "stickys" that can be opened to explain various items. Many times, these "stickys" intrude into a word of type. I want to completely remove the original stickys and replace with different ones.
What I want to be able to accomplish is;
· Edit type, add or replace pages (not talking about those pages that have the various “actions”
· Remove the old stickys
· Add new stickys
· All without losing any functionality.
Can I accomplish all the above in Adobe Acrobat? Can EVERYTHING I covered can be accomplished without an engineering degree. Lol And which version of Acrobat will I need?
Thanks for your help.I'll make certain I have several backups just in case. I will keep the editing down to a minimum on pages that have "actions". Many pages don't have any Stickys but a few have 4-6. Do I just select them and then delete? I have a low end editor that won't delete them..
On those few pages if I delete say 6 Stickys and replace with 6 different ones, do you feel I will be OK if I don't do any other editing? The really great thing is not only the populating of various fields, but that it can be done and saved in Reader and still stay "active."
Is there any specific version of Acrobat to accomplish what I need to do?
Thanks -
I am unable to Save the "Note" field while Creation of new Contact
Hi ,
I am unable to save the Note field while Creation of Contact in Web UI.
Its happening in the Dev system but not in the QA Web UI.
I have tried to debug the component BP_CONT, But no use.
Can any one tell me the what could be the problem?
Regards,
DNHi DN,
The Notes part comes from the following view:
BP_DATA/Notes (Context Node: NOTES; Attribute: TDLINE)
You can debug in this view.
It could also be a case of missing authorization - the entered text don't get saved when the user does not have authorization to save text in text objects. Please check.
Regards,
Shiromani -
How to validate the incoming field value and raise an alert message
Dear all,
I have the following structure
If incoming value for the field externalid is empty then i have to raise a alert message to end user "externalid field is empty for the id : id number" and for all incoming values it should work. I used the following udf on field externalid with two arguments
if(externalid.equals(""))
throw new RuntimeException("externalid field empty for the following id : " +id);
else
return externalid;
This is working fine for single record. But for many records(multiple occurences), this logic is not working as if records 2 and 3 fails it is showing exception externalid field is empty for the id : record 2.
how to achieve the tranformation logic ?
Regards
Koti ReddyHi Amit,
I have tried the above udf, but still stuck-up.
For the above structure shown in image, i have tested giving the following payload
<?xml version="1.0" encoding="UTF-8"?>
<ns0:upsertRequest xmlns:ns0="http://sap.com/xi/SFIHCM01">
<sessionId/>
<upsert>
<type/>
<sfobject>
<id>1</id>
<businessKeys>1</businessKeys>
<type>1</type>
<status>1</status>
<externalId>1</externalId>
<username>1</username>
<firstName>1</firstName>
<lastName>1</lastName>
<mi>1</mi>
<gender>1</gender>
<email>1</email>
<managerExternalId>1</managerExternalId>
<hrExternalId>1</hrExternalId>
<department/>
<jobCode/>
<division/>
<location/>
<timeZone>1</timeZone>
<hireDate/>
<empId/>
<title/>
<businessPhone/>
<fax/>
<addressLine1/>
<addressLine2/>
<city/>
<state/>
<country/>
<zipCode/>
<reviewFreq/>
<lastReviewDate/>
<matrixManagerExternalIds/>
<defaultLocale/>
<customManagerExternalIds/>
<secondManagerExternalId/>
<loginMethod/>
<proxy/>
</sfobject>
<sfobject>
<id>2</id>
<businessKeys>2</businessKeys>
<type>2</type>
<status>2</status>
<externalId>2</externalId>
<username>2</username>
<firstName>2</firstName>
<lastName>2</lastName>
<mi>2</mi>
<gender>2</gender>
<email>2</email>
<managerExternalId>2</managerExternalId>
<hrExternalId/>
<department/>
<jobCode/>
<division/>
<location/>
<timeZone/>
<hireDate/>
<empId/>
<title/>
<businessPhone/>
<fax/>
<addressLine1/>
<addressLine2/>
<city/>
<state/>
<country/>
<zipCode/>
<reviewFreq/>
<lastReviewDate/>
<matrixManagerExternalIds/>
<defaultLocale/>
<customManagerExternalIds/>
<secondManagerExternalId/>
<loginMethod/>
<proxy/>
</sfobject>
<processingParam>
<name/>
<value/>
</processingParam>
</upsert>
</ns0:upsertRequest>
No node is creating for success records, instead it throws exception that "externalid field is missing for the id": id for empty externalid field value in second record.
But my requirement is..... when i process 50 records, records with missing value for field externalid should raise an alert message to end user intimating him to check the externalid field for particular id. If the value for externalid field is present in incoming record/payload, then it should be passed to target system.
How can i implement this logic ?
Regards
Koti Reddy -
Missing class indicator field from database row
Hi,
I have following problem :
There is a class inheritance with root interface and 4 subclasses, they are initialized with class indicator field. If I use ReadAllQuery with an interface or some of concrete class as search class - it is working perfect, but if I try to build query with custom selected fields (addPartialAttribute) I always get an error - Missing class indicator field from database row.
AFAIK This field have not to be mapped in Workbench to real table column, how can I tell TopLink that I will read this indicator field too by reading some custom fields ? I thought TopLink reads such fields automatically, like it does it with primary keys.
Thank you
MaksimThis sounds like an issue with our partial attribute queries and inheritance as the type indicator column must always be read. Can you map the type indicator to a read-only attribute (mark mapping as read-only) and include this in your list of attributes as a work-around?
Doug -
Clearing the data buffer from the input fields
Hi,
I am using an user exit CONFPP02 for the Tcode: co11n. I have written a program such that the confirmation numbers having the status CNF will not be allowed to be processed. The whole confirmation is terminated when the system checks the confirmation number and its status as CNF. If the status of the confirmation number is PCNF, the program allows the further processing of the Tcode Co11n.
The problem starts when the user enters the PCNF status confirmation number and enters, the system stores the values in the various input fields. Now without exiting the initial confirmation screen, if the user replaces the Confirmation number of the PCNF status to the Confirmation number of the CNF status , the system issues a warning message:" Confirmation no. or order/sequence/operation has been changed
However, the input fields still contain default values from thepreceding confirmation". if the user says yes, the program written is bypassed , thus allowing the reconfirmation of the CNF confirmation number into PCNF confirmation number .
Can anybody suggest a suitable method to clear the data stored defultly in the input fields so that the program can be made to work.
With regards,
Avinash.S
Mobile no:09996192456Hi Gilad,
I never use Preview and did not use Preview at all before sending the document over to my most recent client either.
I only opened Preview up this morning after I discovered that all of the form data had disappeared on his end! And the only reason I opened up Preview was because I already knew it looked fine in Acrobat so wanted so wanted to view the form in a different application.
My client would not even have notified me about it had he not sent the signed form back to me and I saw there was no data there! I then called him and asked him about the missing data and he said that he thought I had simply sent over the form purposely with blank fields:(
I have just emailed him to ask him what application he opened it up in. My understanding is that he is on Windows because ne mentioned to me his company was using Windows when we last spoke. Perhaps he has a personal Macbook where he opened it? I just don't know and can hopefully soon find out:)
But THANK YOU for letting me know about that script! I appreciate it:) I have now downloaded and installed it and will just have to use it on ALL of my forms before sending them out:)
Maybe you are looking for
-
Open Qty for Contracts in Purchasing
Hi, Is there a standard config for Open Target Quantities for Contracts, as there is for standard POs (there is Open Qty - 0BO_QTY - within the 0PUR_DS03 transformation), but I need to show an Open Target Qty for Contracts. The value exists within RM
-
Can't login to Mac OS X server website after password reset
Hi, I set up Mac OS X server for our small company and tried resetting the password of my network account that is managed via profile manager. So, under Accounts->User->MYUSERNAME->reset Password, I typed in a new one and hit ok. Now I can't login to
-
Can I get a trial version that runs on OSX 10.6.8 32 bit
Can I get a trial version that runs on OSX 10.6.8 32 bit? If so where? If not what should I do?
-
Safari not displaying Facebook properly
Since yesterday, Safari stopped displaying Facebook properly. I get a white page with no formatting, just a column of links. That is the only site I have problems with. All others seem to work fine and Facebook displays properly if I'm using Firefox.
-
Hi. Help appreciated please. I have two Fusion 5 tablets - One 7 inch and one 9 inch. I have downloaded Adobe X1 Reader for tablets from the Adobe website for both. The 7 inch installed perfectly and pdf files I had downloaded were instantly readable