Mobilemate usb card reader adapter worked well in Macbk pro. suddenly stopped showing up as a device in finder-it is listed as a device in utilities- how do I get it to show up again?

Can anyone tell me how to get my mobilemate sandisk usb card reader adapter to show up in the finder as a device? Card is good and the adapter was working fine until my boyfriend tried to get it to work in a photo frame. When I plugged it back into my mac bk pro it is not recognized in the finder.
It does show up in the utilities as a usb device.
Does not show up as it had before in Image Capture or Iphoto.
LIke I said it was working in this computer no problem. light is on as if it is reading. card is not locked.
thanks!

I reformated the disk with an applecare rep this morning. it did not correct the problem.
the card works fine when I insert it directly.
Just trying to find out why the adapter no longer shows up in the finder when it did previously- yesterday.
This is a usb device. Device shows up in system profiler.
Message was edited by: lizfromwestlake village

Similar Messages

Card reader not working on Mega 865 Pro

Samsung SpinPoint 250GB SATA II Hard Drive SP2004C
1GB Kingston Hyperx 512 DDR400 PC3200 CL3
Intel Pentium 4 630 3 Ghz Socket 775 800Mhz 2mb
LG GSA4163B 16X DVD Dual Layer R/RW/RAM
Windows XP SP2
Now The 7 in 1 card reader does not work! I am used to installing new hardware. There is no entry in the Device Manager for a card reader. I have tried an SD card and a CF card. Tried restarting the PC, tried running Add/Search new hardware wizard. Nothing gets detected. This PC is more trouble than it is worth! The firewire ports and usb ports on the same front panel all seem to work? I've run out of things to try so if anyone has an idea I'd be grateful..
Tech support from MSI - rubbish.

I dont think it is then end of the world if the card reader doesnt work, anyway
what OS are you using? Windows XP should install a driver automatically.
Is the flash drive cable connect to to the motherboard? check the manual to find the cable and enusre it is connected.

USB Card reader not working

My USB multi card reader (Vivanco) , which works fine with Debian and Ubuntu, is not working with Arch.
dmesg:
[14731.984087] usb 1-1.1: USB disconnect, device number 3
[14734.983998] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
lsusb:
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 002 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 002 Device 004: ID 08bb:2902 Texas Instruments PCM2902 Audio Codec
Bus 002 Device 005: ID 046d:c326 Logitech, Inc.
Bus 002 Device 006: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
lspci:
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)
00:1f.0 ISA bridge: Intel Corporation B75 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 650 Ti Boost] (rev a1)
01:00.1 Audio device: NVIDIA Corporation Device 0e0b (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 06)
There is no such device in /dev:
[vibee@archpc dev]$ ls
autofs core full hugepages mapper network_throughput ptmx sda2 stderr tty11 tty18 tty24 tty30 tty37 tty43 tty5 tty56 tty62 ttyS2 vboxusb vcs6 vcsa6
block cpu fuse initctl mcelog null pts sda4 stdin tty12 tty19 tty25 tty31 tty38 tty44 tty50 tty57 tty63 ttyS3 vcs vcsa vga_arbiter
bsg cpu_dma_latency hidraw0 input mei nvidia0 random sdb stdout tty13 tty2 tty26 tty32 tty39 tty45 tty51 tty58 tty7 uinput vcs1 vcsa1 vhost-net
btrfs-control disk hidraw1 kmsg mem nvidiactl rtc sdb1 tty tty14 tty20 tty27 tty33 tty4 tty46 tty52 tty59 tty8 urandom vcs2 vcsa2 watchdog
bus dri hidraw2 kvm mqueue port rtc0 shm tty0 tty15 tty21 tty28 tty34 tty40 tty47 tty53 tty6 tty9 usb vcs3 vcsa3 watchdog0
char fb0 hidraw3 log net ppp sda snapshot tty1 tty16 tty22 tty29 tty35 tty41 tty48 tty54 tty60 ttyS0 vboxdrv vcs4 vcsa4 watchdog1
console fd hpet loop-control network_latency psaux sda1 snd tty10 tty17 tty23 tty3 tty36 tty42 tty49 tty55 tty61 ttyS1 vboxnetctl vcs5 vcsa5 zero
Usually, the sd card should appear as /dev/mmcX, right? How can I get started?

Accoring to this wiki, it could: https://wiki.archlinux.org/index.php/HCL/Card_Readers
Anyway, /dev/sdb is a SATA disk.
Last edited by vibee (2013-07-05 13:22:04)

USB Card Reader not recognized on new Mac Pro (late 2013)

My Sony USB multi-card reader (model: MRW62E), which I use for SD cards mostly, works on my MacBook Pro (Retina, Mid 2012), my new iMac, and my old Mac Pro (2009), via the USB ports, but is unrecognized entirely on my new Mac Pro (late 2013). All machines are running OS X Yosemite 10.10.2. Neither the card reader, nor the cards appear at all in FCP, image capture, apple system profiler, the desktop, or disk utility. I cannot find any drivers online addressing the issue, including Sony's website.
Perhaps an additional update for increased compatibility vis-a-vis the new Mac Pro would do the trick...

Does the reader show up under USB in System Report?
If the reader is working properly both the reader and an inserted card will show up.

The card reader slot on my HP DV3T-2000 suddenly stopped reading my photo card. I have Windows Vista

I saw a fix for this with Windows 7, don't know if it would work for me.

Install Realtek USB 2.0 Card Reader Drivers from link below
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-69558-1&cc=us&dlc=en&lc=en&...
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

How do I get Firefox to display the information bar when a pop up is blocked I accidentally clicked on "Don't show this message when pop-ups are blocked" when a pop up was blocked. How do I get this message to reappear again when a pop up is blocked?

I just updated Firefox but can't get it to display the message when a pop-up is blocked. Most times I want them blocked but sometimes I need them enabled.

You can see a pop-up block icon in the right corner of the Status Bar if you have chosen to hide the information bar at the top.
You can left-click that pop-up block icon on the Status Bar and remove the check mark from "Don't show info message when pop-ups are blocked"
You can look at these prefs on the '''about:config''' page and reset them via the right-click context menu:
Status bar icon: browser.popups.showPopupBlocker
Info bar at the top: privacy.popups.showBrowserMessage
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page.

HT1391 Purchases show in the Playlist folder /Purchases, but not anywhere else in the Library Album, etc: - how do you get them to show there?

Songs that I have purchased and downloaded show in the Playlist folder under "Purchased", but not in the Library under Artist, Album etc:. What do I need to do to have them show under Artist, etc;?

Download the free iTunes Single of the Week...
Sounds a bit voodoo I know, but it has a good strike rate.
tt2

Broadcom USB Smart Card reader not working

After upgrading my Vista Business SP2 (32-bit) to Windows 7 Ultimate RC (32-bit) my Broadcom USB smart card reader does not work any longer (Dell Latitude E6400 with built in smart card reader).
The newest available driver from dell support was already tested (Broadcom, driver date 09/23/2008, version 1.0.0.1, digitally signed WHQL, released by dell in March 09), but the device can not start (Error code 10) with Windows 7.
With the Microsoft WUDF Driver (Usbccid, driver date 06/21/2006, version 6.1.7100.0) the device starts but whenever I insert my smart card an additional device is detected (other device - smart card) but no driver found - Error message is: The drivers for this device are not installed. (Code 28).
What else can I try to get this reader working again (with vista sp2 the smart card reader was working fine with the broadcom driver)?

I have also an USB card reader that works fine on XP PCs but Win7 does not recognise it, can msft make a sd reader driver that works pls.
Hi
Sorry, but the way the industry works is that Microsoft develops Windows and Hardware manufacturers develop drivers for their products. Microsoft does maintain a complete division (MSDN) that is dedicated to assisting hardware and software manufacturers in developing their products for compatibility with Windows.
All of the drivers that are contained on the Windows installation disk and on Windows Update are placed there by the manufacturers of the devices. This is a service that Microsoft provides to help these manufacturers to distribute their drivers.
What you can do.
1. Check with the computer manufacturer for updated drivers for that device. This is your best source, since the computer manufacturer builds, tests, and sometimes develops their own, custom drivers to work with the hardware on their PCs.
2. Try to determine the name and manufacturer of the device using Device Manager and MSInfo32. Once this information is found, try to find that manufacturers website and look for the latest compatible drivers.
3. Check to see if there are any users forums on the PC manufacturers or device manufacturers websites. Ask there about any known issues with this particular hardware device or if the device is no longer supported.
4. If the drivers are found but are only available for previous versions of Windows, install the drivers using the Windows Compatibility Mode. HOW TO: Install a Hardware Device Driver using Compatibility Mode
Right now, we are in a unique situation since we are using an operating system that is still in the pre-release phase. Many hardware/software manufacturers will be ofrficially supporting their products for Windows 7 until after the General Availability date of October 22, 2009.
Hope this helps.
Thank You for using Windows 7
Ronnie Vernon MVP

T430s SDHC card reader not working

Hi, I recently bought a T430s and when I tried to insert a SD card it did not show up in my computer. I've tried 3 different SD cards the sizes are16 gb, 32 gb and 2 gb and neither of them shows up, to make sure the problem is not in the SD card I tried using the SD cards in 2 cameras and 2 other laptops. In all those devices the cards works.
I have tried installing these drivers from this thread https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/New-T430s-4-in-1-express-card-SD-reader-mi... but it did not work.
I also tried following the instructions in this thread http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T430s-card-reader-cannot-read-16-GB-SDHC-ca... but that did not help either.
According to the device manager the Ricoh PCIe SDXC/MMC Host Controller is working correctly. The Ricoh SD Disk Device is also working correctly.
Whenever I insert the SD card the Sound for a new device plays and when i remove the SD card the removal sound plays. How can I fix this? I'm going away for 7 weeks with my laptop so I need to fix it ASAP and I dont have time to send the laptop to Lenovo.
EDIT:
I uninstalled Ricoh Media driver and now 1 of the cards show up but Windows complains about that it needs to be formatted, but the size is 0 so that doesn't work either. Tried installing the driver again and now they show up in the device manager again and proudly says that they are working but the SD card still doesn't show up so I can read the files on it.
EDIT 2:
If I go into the device manager and forcibly update the the Ricoh SD Disk Device then it says:
Disc: Disc 1
Type: Removable
Status: Online
Partitiontype: MBR (Master Boot Record)
Capacity: 15807 MB
Non-allocated space: 0 MB
Allocated space: 0 MB
For the 32 gb SD card everything is the same but instead it says "Capacity: 30828 MB".
EDIT 3:
When the SD card is inserted a storage device pops up in the device manager. The name of the device is just "Unknown device" and the status is that it can't find any installed drivers for the device.

I'm experiencing a similar situation with my 1-year old T430s. The built-in card reader was working fine until recently when it stopped working.
Now the built-in SD card reader doesn't recognize SD cards that are recognized in external USB adapters.
Device Manager shows Ricoh PCIe SDXC/MMC Controller when an SD card is inserted into the card reader but neither Windows Computer Management/Disk Management nor Windows Explorer show the drive. Device Manager indicates that the driver is up-to-date (v6.10.10.32 25May11.)
When I put the same SD cards into an external USB adapter they're recognized by Windows, assigned a drive letter and visible to Windows Explorer as well as other applications.
Do I have a defective card reader?
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

USB-3 card reader that is compatible with MacBook Pro (Retina) and Mountain Lion

Can anybody recommend a USB-3 based CompactFlash memory card reader that works with the MacBook Pro (Retina) and Mountain Lion (or, at least, Lion)?
Thanks in advance...

Thanks for your reply, Clinton. But I already have two readers that are USB-2 compatible. Now I need the one like I described above. I am using only the fastest CF cards available.
I have read some user reports (on Amazon) on two readers relevant to my needs - SanDisk and Lexar - but I'm still not sure whether they are fully compatible with the Retina MacBook and Mountain Lion. As a matter of fact, I doubt it...
Message was edited by: Twitcheye

I have trouble getting the scrubber bar to show. How can I get it to show on my screen?

I have trouble getting the scrubber bar to show on my screen. Sometimes it's there and sometimes it's not. How can I get it to show on the screen whenever I want. Nothing in my manual answers that question.

The Users Guide says:
Additional audio controls
To display additional controls, tap the album artwork on the Now Playing screen. You can see elapsed time, remaining time, and the song number. The song’s lyrics also appear, if you’ve added them to the song in iTunes.

USB Card Reader no longer works after Lion update.

My USB card reader/writers no loger work since I "upgraded" to Lion 10.7.4. All was well with Snow Leopard, but with no built-in SD card reader I must rely on USB readers. Anyone know how to fix this issue? Are there updates avaiable or coming soon to resolve this issue?

Hi MissMedia 83 and welcome to the forums!!
This has been a trend that a lot of AppleCare advisors have been seeing as call drivers. Essentially, many of the USB internet modems that are used widely require a 32bit kernel to operate. In Snow Leopard, although the system was in 64bit by defauly, people had the option of booting the computer into a 32bit mode to use the USB modems successfully.
With Lion, however, no such options exists. If your USB modem device is only compatible with a 32bit machine, then your only options are to either downgrade to Snow Leopard or find a different provider that supports 64bit.
Sorry to be the bearer of crappy news. My suggestion is to use something like a pocket wifi or personal hotspot, where you have a wifi network that is being created by a small device that connects to the cell network. Much much easier and your computer thinks it's just a regular wifi network.
This is what I think the issue is anyway. Could be wrong.
Any other suggestions?

In my macbook pro hdmi, usb & SD card reader not working

In my macbook pro hdmi, usb & sc card reader not working.
i have tried the SRM reset done, till not working started.
Could you please resolve this problem,

Welcome to Apple Support Communities
Simply take it to an Apple Store or reseller if it's in warranty. Your Mac will be repaired or replaced for free because it looks a hardware problem rather than a software issue.
If it's not in warranty, hold Command and R keys while your MacBook is starting up, and reinstall OS X. If it doesn't work, you can't do much more to solve the problem

Sun Ray - How to get external USB Card Reader working

Dear All,
i have the following problem. Maybe someone could help me or give me a clue to solve it.
SunRay Software 5 installed
Window 2003 R2 TerminalServer
Here my question:
I use a kiosk session with a smart card to conncet to the windows server - works perfect.
Login Screen and go.
Now i have to have to authenticate myself with an external usb card reader and smart
card (connected to the sun ray) to use a certain application on my win2003 server.
Via the windows rdp session (from the laptops) everthing is ok. The information from
the card reader is transferred to the server.
If i use the Sun Ray nothing happens. So here is my problem:
How do get the authentication information from the smart card to the server?
Thanks in advance
Best regards
Hans-Peter

Basically, reinstall the Boot Camp video drivers manually and if that doesn't work then go to the AMD/Radeon website and install the Windows drivers directly for your video card model.
If you want to do a search you will find others that have pretty good luck doing it either way.

USB Card reader works on MacBook Pro but not Mac Pro

I have a random "All-in-1" card reader from Quantaray. I'm trying to mount my CF card because it takes forever and a day to import HD video directly from my Canon 5D Mk II.
It works on my MacBook Pro (Mid 2010). Both computers are running 10.6.8. All I have to do is plug it in and it appears on the desktop on my Macbook. But not on my Mac Pro.
I've already tried resetting the PRAM and SMC. No dice
It shows up in the System Profiler under the USB High Speed port as a usb card reader but I can't find it anywhere; not even in Disk Utility.
Any ideas?
Thanks

jaypie77,
First, you must identify the application that created the file. If it truly was Macromedia Flash, fine. Once you know which app created the file, make certain that the same application exists on the Mac Pro. If it does, set the file to open in that application: Open a Getinfo window for the file, then use the "Open With..." dialogue to choose Macromedia Flash (or the correct application) to open the file.
Scott

Mobilemate usb card reader adapter worked well in Macbk pro. suddenly stopped showing up as a device in finder-it is listed as a device in utilities- how do I get it to show up again?

Similar Messages

Maybe you are looking for